|
| 1 | Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) completeall as specified and directed. |
| 2 | M&Lfor preparingexisting black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primerusing paving bitumenat 5 kg /10 sqm complete all as specified and directed . |
| 3 | Paving Bitumen and Penetration ,macadam 4%, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as secified and directed. |
| 4 | Applying evenly a priming/ tack coat with bituminous primer at 2.5 kg per 10 sqm complete all as secified and directed. |
| 5 | Bituminous (Paving Bitumen and Penetration) asphaltic dense concrete 40mm consolidated thickness with 5.5% binder content as in semi-dense asphaltic concrete by weight of totalmix, rolled and compacted to required camber and gradient complete all as secified and directed. |
| 6 | M & L for Prepration of black top surfaces of road and applyingand marking 2.5mm thick centre lines, stop lines. dashes, arrow etc and the line exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint, of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified. |
| 7 | Demolition of Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as secified and directed. |
| 8 | M&L for Laying and compacting 100 mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber as specified. |
| 9 | M&L for Laying and compacting in 2 layers of 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradientand camber required Granite,trap or Basalt as specified. |
| 10 | M&L for 100mm thick Cement Concrete in foundations, filling and mass concrete type C-1, 1:3:6 (40mm graded aggregate) as in base course complete all as secified and directed. |
| 11 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specifie as directed. |
| 12 | M & L Providing and laying 80mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method usingPU mould, laid in required colour & pattern over and including 50mm thick compactedbed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified . |
| 13 | Providing & Laying Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement andpigment complete all as secified and directed by Engr-In-Charge. |
| 14 | Providing & Laying Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100mm thickness M-50 Grade with grey cement andpigment complete all as secified and directed by Engr-In-Charge. |
| 15 | M&L forPre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete type B-1 1:2:4 (20mm graded agg)set in CM (1:4) complete all as secified and directed by Engr-In-Charge. |
| 16 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth w/o using extra cement complete all as secified and directed by Engr-In-Charge. |
| 17 | M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as secified and directed by Engr-In-Charge. |
| 18 | S&F in repair Two reflective Plastic body reflective panel Amber, Red or white Road Studs (Cat Eye) of size 108x100x20mm complete all as specified and directed by manufacturer. |
| 19 | S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 20 | M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B-1 1:2:4(20mm graded agg)comlete all as secified and directed by Engr-In-Charge. |
| 21 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil. |
| 22 | M&L 100 mm thick, hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface. |
| 23 | M & L forCement concrete 100 mm thick type B- 2,1:2:4 (40mm graded aggregate) complete all as specified and directed |
| 24 | Removing excavated soilto adistance n exc 50 m and depositing directed at a level n exc 1.50 mtr from starting point. |
| 25 | Supply and fix polycarbonate convex mirror (80cm dia) make 3M or equivalent in AUTOMAT/ACE/DARK EYE/ISI marked, polycarbonate body mounted on 16 gauge MS pipe of 75mm outer dia fixed 1.5 m above ground surface and 60cm below ground incl PCC foundation of size 30 x 30 x 60 cm with PCC 1:3:6 type C1 bottom part MS puipe welded with 5mm thick 125mm x 125mm MS pipe for anchorage in PCC, MS pipe shall be painted stove anamelled paint over a coat of red oxide, incl necessary earthwork excavation in any soil, removal and disposal of spoil, complete all as specified and directed (Note-Convex mirror shall be as per sample) |
