Tender For Special Repair To Building No P-11 (1 To 6 Qtrs) Or Md Accommodation At Nabha Under Ge (S) Patiala.; 1 Notes: (i) Please refer Schedule A Notes of tender documents. 2 Taking downcement or cement lime plaster on brick or stone wallsetc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. 3 M&L for 15mm thick cement pastering in cement mortar 1:4 and mixig the water proofing compound as per manufactures instructions on brick or concrete surface of wall finished even & faircomplete all as specified and directedNote : Water proofing compound shall be measured and paid saparately under item . 4 M&L 10mm thick cement plastering in cement mortar 1:6finishing the surface even and smooth without using extra cement complete all as specified and directed. 5 Complete removal of existing treatment of any type/description such as distempering work , internal emulsion etc from internal/ external surfaces of walls & ceiling with mechanical means/ grinder including removal of material from site complete all as specified and directed.Note- Before execution of finshing work, complete removal of existing treatment shall be verified by BOO and only than payment released to Contractor 6 M&L Preparation ofnew plastered or unplastered surfaces of walls, two coats of cement base paintover a coat of cement primer complete all as specified and directed. 7 M&L for Providing and applying 3mm thick wall care putty on wallover plastered surface to prepare the surface even and smooth and complete all as specified and directed. 8 M&L prepration of new plastered or unplastered surface of walls and applying two coats of distemper oil emulsion complete all as specified and directed. 9 Supplying & applying for two component elastomeric acrylic polymer modified cementitious waterproofing coating on Brick level, SmartCare Damp Block 2K or approved equivalent, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTMC1202, crack bridging up to 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI, will be apply on both Positive & Negative side and resist up to 5 Bars of Hydrostatic Pressure. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc. After coating will sprinkle Sand on the coating then apply plaster on the coating which is in contractor scope, complete as manufacturer specifications and as directed. 10 Supply only integral water proofing compound ISI marked complete all as specified and directed. 11 M&L for rendering 5mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed. 12 M&L for preparation of new plastered or unplastered surfaces applying three coat of white wash on ceiling surfaces complete all as specified and directed. 13 M&L for preparing old plastered surfaces of ceilings and applying one coat of white wash in complete all as specified and as directed. 14 Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed 15 All as per srl item No 14hereinbefore but n. exc 1.5 sqm each complete all as specified and directed 16 S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixings providing lugs, hinges, lock strike plate, hold fasts, filling PCC (1:3:6 type C0) in chowkhats , PCC 1:2:4 type B1 as in hold fast blocks etc., complete as specified,size 105x 60mmincluding cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified and directed. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhatsshall be repaired to match with existing finish .Cost of the same will be included in this item. 17 S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with double rebate including necessary fixings providing lugs, hinges, lock strike plate, hold fasts , filling PCC (1:3:6 type C0) in chowkhats , PCC 1:2:4 type B1 as in .hold fast blocks etc., complete as specified,size 125x 60mm including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified and directed. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhatsshall be repaired to match with existing finish .Cost of the same will be included in this item. 18 M&L Plain cement concrete (1:3:6) type C-0,using 12.5 mm graded mechanically crushed stone aggregate as in back filling of pressed steel frame /hold fast blocks etc and similar complete all as specified and directed. 19 S&F 30 mm thick Flush shutters, solid core construction, withblock board core and plywood face panels, commercial type on both sideskiln seasoned and chemically pressure treated all as specified and directed. 20 S&F 35mm 2nd class hard wood Glazed and skeleton shutters,2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. 21 S&FAluminium 200mm anodised, barrel tower bolt of extruded complete all as specified and directed 22 S&F for aluminium anodised sliding door bolt of size 250mm, stove enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and as directed. 23 S&FAluminium handles 125mm cast type , anodised complete all as specified and directed. 24 S&F Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified. 25 S&F in repair 300 mm long MS rat tail pattern spring hinge including roller and roller plate, complete all as specified and directed. 26 S&F Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring fixed complete all as specified and as directed. 27 M&L for providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled anddouble shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -2 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf.(c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. 28 M&L for anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction. 29 M&L for providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beed 20mm size complete all as specified and as directed. 30 M&L for built in steel cup board shutter made out pressed steel frame of size 75mmx45mmx1.25mm thickwith prressed steelshutter 01mm thick Godrej pattern fixed to masonry wall by hold fasts made out of 25x3mm flat iron including mild steel CPhanging rod of 20mm dia with brackets fixed on inner sie of one leaf of shutter and on other leaf provision of mild steel CP peg set of 3 including spray painting with two coats of synthetic enemal paint over one coat of red oxide primer all around on steel surfaces of frame and shutter including taking down existing wooden cup board and making good disturbed portion in CM 1:3 or PCC 1:2:4 all as specified and directed. 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete all as specified and as directed. 31 S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified and directied 32 M&L for preparingof newsurface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying twocoat of synthetic enamel pain and one coat of pink primer complete all as specified and directed. 33 M&L for preparing surfaces of any description over 10 cm girth or width,not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide on new surfaces of steel or iron, complete all as specified and directed. 34 Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed. 35 Dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises 36 M&L 25mm thick PCC (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregates in complete all as specified and directed. 37 M&L for Ceramic floor tiles of 7 to 8mm thick area of each tile exc0.18sqm but not exc0.38sqm in floor etc set and jointed in neat cement slurry and pointed in white cement to match over and including 15mm thick screed bed in CM (1:4) laidin complete all as specified and directed. 38 M&L for Non Skid coloured tiles 7 to 8(square/rectangular) area of each tile ecxc 0.06Sqm but not exc 0.11sqm in flooring etc set and jointed in neat cement lurry and pointed in white cement to match over and including 15mm thick screed bed in CM (1:4) laidin complete all as specified and directed. 39 M&L for coloured glazed ceramic tiles (300 x 600 mm) x 7mm or (300 x400 mm)X7mm thickas in vertical surfaces such as skirtings, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 10mm thick back coat in CM (1:4), in complete all as specified and directed. 40 S&F sinks with drainage board made of stainless steel1mm thick kitchen or laboratory with plugs washers and wastes icluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm.complete all as specified and directed. 41 Taking Up or down steel tubing of size 15mm bore complete all as specified and directed. 42 Taking Up or down steel tubing of size 20mm bore complete all as specified and directed. 43 Supply and laying of 20mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed. 44 Supply and laying of 25mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed. 45 S&F in repair mild steel chromium plated 20mmcurtain rod with fixing brackets, stops rollerscomplete incl fixing brackets, stops etc all as specified & directed as in repair .Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. 46 S&F in repair 18 mm thick LEAD FREE PVC celuka ply of approvedcolor fixed with screws, slovent cement/adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufactureds specification complete all as specified and directed.NOTE: Not less than 10kg per sqm 47 S&F in repair 12 mm thick LEAD FREE PVC celuka ply of approved colour, fixed with screws, slovent cement/adhesive to make wall mount kitchen cabinets back and pull out drawer sides complete as per manufactureds specification complete all as specified and directed. 48 S&F auto closing hinges 35 mm of 0 crank(KH-001) or8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in postion all as specified and directed. 49 S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 Kg complete all as specified and directed. 50 S&F Paino/continuous hinge of size 30 mm stainless steel complete all as specified and directed. 51 S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufactures instructions all as specifed and directed. 52 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150 mm long matt finished complete fixed in position all as specified and directed. 53 S&F stainless steel 304 grade wire Basket (avg wait 2.5 to 4 Kg per basket) of pull outtype like plain/cup& saucer/bottle/multi purpose/2-3 shelf baskets etc for kitchens of required suze complete fixed in position all as specified and directed. 54 Dismantling of brick tiles or terracing tiles single layar on roofs complete all as specified and directed. 55 Demolation of mud puska and removingon roof any thickness complere all as specified and directed. 56 M&L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregates as in padding over roof a slope of 1:100 using water proofing compound finish even and smooth without using extra having minimum thickness of 50mm cement complete all as specified and directed.Note: Average thickness of cement shall be measured and paid separately. 57 M&L for the following roof treatment.(a)Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick weight not less than 3.60kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt, fixed as per manufacturer’s instructions complete all as specified and directed.(b)Applying one coat of bituminous primer confirming to IS-3384 @ 0.3 Ltr/Sqm.(c)Applying one coat of aluminium paint over APP membrane @ 0.50 litres per Sqm all as specified and directed. (d)Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per square metre including cleaning the surfaces all as directed and specified.Note: Before execution of APP treatment, ponding test report be carried out and if any leakage/ seepage noticed contractor have to do PCC test and ponding test again to the entire satisfaction of Engineer-in-Charge and nothing extra shall be paid for the same.(ii)APP treatment shall only be started when ponding test report duly signed by the all concerned submitted to the GE. 58 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 59 S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing complete all as specified and directed. 60 S&F PVC(SWR) Floor trap 75mm plain with & including CPgrating jointing to wate pipewith solvent cement complete all as specified and directed. 61 S&F PVC (SWR) rain water pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete as as pecified including flat iror clamps 25x3mm complete all as specified and directed including taking out old damaged AC rain water pipes. 62 S&F PVC (SWR) bends of any radius for 110 mmdia rain water pipes with rubber ring joints a complete all as specified and directed. 63 S&F rotational moulded polythene water storage tank (ISI marked) cylindrical vertical with closed top 500ltr capacity double layeredhoisted and fixed in position incl20 mm bore ball brass valves high pressure with polythene float and fly nut all as specified in SSR Part-1 complete all as specified and directed. 64 S & F 125mmBrass chromium plated shower rose complete all as specified and directed. 65 S&F in repair Bib taps for 15 mm dia bore pipe cast copper alloy chromium plated with capstain head screwed down for iron pipe or brass ferrule and fixed all as specified and directed. 66 S&F in repair Pillar taps Cast copper alloy fancy type 15mm bore, with capstan heads Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed with long screwed shanks and fly nuts screwed for iron pipe andfixed complete all as specified and directed. 67 S&F in repairAngle stop valve (Concealed type) cast copper alloychromium plated with capstan head, long shank and cup screwed downscrewed for iron pipe or for brass ferrule for 15mm bore pipe completeall as specified and directed. 68 S&F in repair 20mmStop valves/ gate valve , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 69 S&F in repair 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete all as specified and directed, 70 S&F viterous china, wash hand basin, white, flat back, size 550x400mm including PVC waste pipe 32mm bore and mild steel brackets, fixed all in repairs, including cutting for or pinning in brackets complete all as specified and directed 71 S&F 600mm x 450mmmirror of selected quality glass mounted on 6mm thick AC building board with alluminium frame all around hanging to wall with rawal plug and iron slits cup washers complete all as specified and directed. 72 S&F tubular towel rail, CP 20mm dia, 60cm long between flanges fixed in repairs complete all as specified and directed. 73 S&F low level flushing cistern of PVC 10 ltr capacity incl 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy,screwed both ends, high pressure (wt not less than as specified in SSR), PVC flush pipe 32 mm bore complete all as specified and directed. 74 S&F viterous china ware wash down water closet Orrisa patternsize 580x440mm white with integral foot restsincluding connection to traps and to flushing pipe, anti syphonage pipe complete fixed in repair and complete all as specified and directed. 75 M&L for Hard core of broken bricks of gauge nexc. 63 mm spread and levelled in layers nexc.15cm thick, watered and rammed to a true surface all as directed and specified 76 M&L for PCC (1:3:6), 50mm thick aggregate size 40mm as in PCC path/ plinth protection.finished the surfaces even and smooth with out using extra cement complete all as specified and directed. 77 M&L 20mm thick black colour graniteMachine cut as in border (Patti) laid over cement screed 15mm thick in CM 1:4 over and jointed with gray cement slurry mixed with pigmentincluding rubbing and polishing complete all as specified and directed. 78 M&L for machine cut Kota stone slab flooring 20mm (+2mm) thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 25mm thick cement concrete type B-0 (12.5mm graded aggregate)complete all as specified anddirected.Note: When the item to be executed in steps, single piece of kota stone shall only be executed. 79 All as per item No 78 here in before on vertical surfaces as in skirting/dado of size as required at site in CM 1:410mm thick but excluding 25mm thick PCC complete all as specified and directed. 80 M&L for providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand complete all as specified and directed 81 M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed. 82 S&F Stainless steel wall mounted kitchen dish plate rack of size 750mm X600mm X 250 mm as described and complete all as specified and directed. 83 S&F for PVC enclosed case (cabin type) with cover and looking mirror over it with twoshelves in it complete all as specified and fixed with screws on wall complete all as specified and directed. 84 S&F PVC (SWR) Sewage pipes single socketed,inanylength with rubber ring joints, laid in trenches or in floors of 110 mm borecomplete all as specified and directed 85 S&F PVC (SWR) Sewage pipes single socketed,inanylength with rubber ring joints, fixed to wall of 110 mm borecomplete all as specified and directed. 86 S&F PVC (SWR) 110mm bore Bend complete all as specified and directed. 87 S&F PVC (SWR) 110 mm vent cowl complete all as specified and directed. 88 S&F in repairPVC(SWR)junction double, (double T), equal or unequa 110 mmwith parallel branch complete all as specified and as directed. 89 S&F PVC P & S trap with grating including jointing to waste pipe110 mm dia fixed all as specified and directed 90 Demolition and breaking up 150mm drain pipes set in cement mortar (salt glazed stoneware/asbestos cement/reinforced) and removal of debris to low lying area to a distance not exceding 100m, complete all as specified and directed. 91 Reinforced concrete pipes, class NP2 laid and jointed complete with collars bore in pipes 150mm complete all as specified and directed 92 M & L for 150mm bore, cement concrete bed 1:3:6 type C2,using 40mm graded stone aggregate to drain pipes including packing under and haunching against the sidesof pipes after they are laid and fitted complete all as specified and directed. 93 Excavation in trenches not exc 1.5m wide and not exc 1.5m in deep and getting outin soft/loose soil for foundations, etc or for shafts, wells, cesspits, manholes, pier holes, etc complete all as specified and directed. 94 Removing excavated material(soil) to a distance not exc 50mm and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed. 95 M&L for PCC 1:2:4, type B1, using 20mm size graded stone agregates as in bands, copings, etc., including necessary formwork complete as specified and directed. 96 Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soils complete all as specified and directed. 97 Demolition of brick work or stone masonry built in cement mortar including all quions, arches, pillers, etc complete all as specified and directed. 98 M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in cm 1:4 with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius all complete all as specified and directed. 99 M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfacesfinished even and smooth without using extra cemnt complete all as specified and directed. 100 Demolition of reinforced cement concrete of any description (Reinforecement cut as required to facilitate demolition) complete all as specified and directed. 101 M&L for reinforcement cement concrete (Normal mix )1:2:4 Type B1 (20mm graded aggregate) as in slab support on wall, beams and columns in floor roof landing balconies deck slab and in shelves and the like complete all as specified and directed. 102 M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. 103 S&F Fe-410 (Gde E-250) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening complete all as specified and directed. Note - Removing of old gate fixing new steel gate of hold fast ,finish the surface included in this item. 104 Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceilingroses, pendants, regulators, socket, lamp holders brackets, bulkhead fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed. 105 M&L for point wiring with1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVCconcealed conduit( ISI Marked) of heavy dulywith all accessories ie PVC gutties etc terminated insunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/all as specified and directed in ceiling Portionsurface conduit wiringto be done.Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCBs in DBs without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) Necessity cutting chasing where ever required shall be part of job & making good the disturbed surfaces shall be part of job. 106 All as per item No 105 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed. 107 All as per item No 105 above, but for one 3/5 pinsocket outlet 5 Amp on the same board with other switches complete all as specified and as directed. 108 All as per serial item No 105 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded)PVC insulated and unsheating electric cable 1100 volts(ISI Marked) including PVC insulated and unsheathedelectric cable 1100 volts 2.5 Sqmm copper stranded conductor ascontinuous earthwire connected to common earth dolly complete all as specified and as directed. 109 M&L for Modular switch 1 way 6A, 1 module type complete all as specified and directed. 110 M&L for Modular switch 1 way 16A, 1 module type complete all as specified and directed. 111 M&L for Modular Socket, 6A - 5 pin2 module typecomplete all as specified and directed. 112 M&L for Modular Socket 6A/16A - 2/3 pin 2 module type complete all as specified and directed. 113 Supply and Fixing LED light fittings 1 x 20 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as specified and directed. 114 Supply & fix in replacementof LED 10 Watt, 2 feet long, Cool day light with NEO Batten10 W 6500K having high efficiency complete all as specified and directed. 115 Material and labour for modular ceiling rose surface type, 65 mm x 50 mm two to three terminals/ PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed. 116 Material and labour for lamp holder modular type, PVC/ polycarbonate type with back plate suitable for 7 to 18 wattscomplete all as specified and directed. 117 Supply and fix inverter LED Lamp 9 Watt complete all as specified and directed. 118 Supply and fix inverter LED Lamp 15 Watt complete all as specified and directed. 119 S&F LED light fitting 1x9W/1X10W bulkhead luminaires 230 Volts including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 120 Material and labour for call bell ding dong AC 230 volt single pole complete all as specified and directed. 121 Material and labour for Modular Bell push 6A 1 module complete all as specified and directed. 122 M&L for fan step regulator, 120W - 1 module complete al as specified and directed. 123 S&F energy saving ceiling fans complete with blades, down rod and with all accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM not less than three star rated with brushless direct current motor (BLDC) complete all as specified and directed.Note:-Unsv C/Fan will be deposted to MES office. 124 S&F Exhaust fan 300 mm sweep, metal body type AC single phase 240 V with louver complete all as specified and directed. Note : The limit quoted rate including fixing of exhaust Fanon wall with suitable size anchor bolt , cutting wall for making holesuitable for 300 mm sweep exhaust fan, grouting and making good the disturbed surface shall be part of job and nothing extra for the same shall be payable. 125 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweepcomplete all as specified and directed.Note : The limit quoted rate including fixing of exhaust Fanon wall with suitable size anchor bolt , cutting wall for making holesuitable for 250 mm sweep exhaust fan, grouting and making good the disturbed surface shall be part of job and nothing extra for the same shall be payable. 126 Supply and fixing Vertical load line type TPN DB, 8 way 415 V, double door as per IS - 8623, IP-54 protection, universal mounting with suitable capacity copper bus bar with nuetral bus bar, earth bar and cable ties for cable management, top and bottom removable gland plate suitable for accomodate MCCB TPN 100 Amp as incomer and TP&SP MCCB/MCBs as outgoing complete & making necessary electrical connection for incoming and outgoing cables, with copper lugs, crimpped with crimping tool complete all as specified and directed. Note: (i) Connnections of the MCBS shall be done with appropriate size of brass/Cooper thimble. (ii) The disturbed surface shall be match with existing shall be part of job. 127 S&F in replacement of existing MCCB TPN, 100 Amps, 415 volts, 16 KA complete fixing in DBs including proper thimbles connections all as specified and directed. 128 S&F SPN DB suitable for MCBs of single pole and neutral 8 Way as per IS - 8623, IP-54 protection,double door type with 200 amp rated bus bar complete all as specified and directed. Note: i) Connnections of the MCBS shall be done with appropriate size of brass/Cooperthimble. (ii)Dismantling of existing sheet metal box will be deposited to MES.(iii)Masonry work to fill the space of iron sheet box will be part of the job.(iv)Energy Meter will be refixed & connected after fixing of new DB.(v)MCBS shall be fixed with copper wires FRLS 1.5/2.5 Sqmm incl appropriate size of brass/Cooper thimbles. (vi) Existing metal enclosure of SPN DB will be deposited to MES. 129 Supply and fix in replacement of MCB SP up to 6-32 Amp (B Curve) complete all as specified and directed. 130 Supply and fix in replacement of MCB SPN 6-32 Amp (B Curve) complete all as specified and directed. 131 M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x6 sqmm ( line conductor) & 1x6 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVCinsulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed.Note: (i)Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (ii)Connections of cables with MCBs or bus bars shall be done throughbrass/copper thimbles of appropriate size. (iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. 132 M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frame 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipeincluding excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I.complete all as specified and directed. 133 S&F new generation energy saving and environmental friendly long life LED building security light 1x25/35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07,with all accessories including suitable bracket with suitable dia light grade GI pipe bend to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed. 134 S&F Single Phase PVC Junction box suitable for mounting on LT RCC pole of 9 mtr long,box having Al busbar 20 Amp rating with 6 Amp MCB (B series) control, mounted on insulators with 2 clamps of copper strip for earthing of the armoured of the cable complete with making holes for connecting cables etc nuts bolts etcfront openable hinged cover suitable for mounting on steel clamps nut bolt etc pvc adopters and PVC hose pipe upto cable treench for incoming and outgoing cables, factory made duly painted with powder coating process completeed as specified and directed. 135 M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x1.5 sqmm ( line conductor) & 1x1.5 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVCinsulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note: (i)Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (ii)Connections of cables with MCBs or bus bars shall be done throughbrass/copper thimbles of appropriate size. (iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. 136 S&F energy efficient Geyser (water heater) vertical storage type 240 volts, 2000 Watt,not less than three star rating water proof IPX-4 Pprotection having adjustable knob for temperature settings, copper cell of 25 Ltr capacity with all accessories such as safety valve, thermostate, NRV, connection piece etc. and incl cost of anchoring arrangement (nut & bolts)to the wall, corded copper electric cable etc incl dismantling of existing geyser complete all as specified and directed. (Note:-Unsv Geysers will be deposited to MES office. ) 137 Supply and fixing Weather proof flat twin core cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 Sqmm, 2 core laid on poles / walls complete including connection to LT pole and street light control box complete all as specified and directed. 138 Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm, 3.5 core laid in trenches /on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed. 139 M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified and directed. 140 Supply and laying GI tube 50 mm light grade as in cable protection pipe including all fittings & taking down / taking out from trenchcomplete all as specified and directed. 141 M&Lfor laying of well burnt Brick 23 cm x11.5 cm x7.5 cm for cable protection complete all as specified and directed.
