|
| 1 | Carrying standby 5/7.5/10/12.5 HP pump-motor set from Deptt store to worksite including loading and unloading at both ends all complete. |
| 2 | Hiring of derrick arrangement |
| 3 | Withdrawing the damaged 5/7.5/10/12.5 HP pump motor set along with coloumn pipe assembly from said T/W by proper lifting arrangement with derrick arrangement after disconnection of power line and delivery line. |
| 4 | Lowering the dept.supplied 5/7.5/10/12.5 HP pump motor set at said T/W by proper lowering arrangement with derrick arrangement including joining the cable end making all connection complete. |
| 5 | Carrying damaged 5/7.5/10/12.5 HP pump-motor set from the P/Hto deptt store including loading and unloading at both ends all complete. |
| 6 | Supply delivery & fitting fiixng of the following items:- Make;- Any approved vendor of PHED |
| 7 | 1.1 KV grade 4 sq.mm x 3 Core water proof flat submersible cable |
| 8 | 25 mm dia Nylon rope |
| 9 | 3 mtr long 80mm dia UPVC column pipe [Cream colour] with both side threaded and one end side socketed with registered KPMG. |
| 10 | 1.5 mtr long 80mm dia UPVC column pipe [Cream colour] with both side threaded and one end side socketed with registered KPMG. |
| 11 | 80mm dia CI top & bottom adopter |
| 12 | 80 mm dia x 150 mm long GI short piece -1 no. and 65 mm dia x 80 mm dia GI enlarger - 1 no. |
| 13 | Supply & Delivery at site of 100 Amps 415 V TPN rewireable type switch fuse unit 4 Nos and 100 amps 415 V 4 pole changeover swich ( side handle ) 4 Nos as per direction ( Make- Approved vendor of PHED) |
| 14 | Supply & Delivery at site of 63 amps 4 pole 415 volt with braking capacity 50 KA MCCB with adjustable overload & short circuit protection including enclosure. |
| 15 | Supply & delivery of pressure gauge 150 mm dia (0-7 Kg / Sq cm] brass cock and fitting complete [ This cost includes 15 mm dia G.I pipes and specials] |
| 16 | Supply and delivery at site Rewireable kit kat 100 Amps 415 V ( porcelain carrier and base) Make- approved vendor of PHED ) |
| 17 | Supply & delivery of Overload relay range 13-2-20.0AmpContactor type-NONContactor rating-25 AmpProtection includingphase failure phase imbalance & phase Reversal, short circuit protection through MCBAmmeter & voltmeter suitable ratingOn/off and trip indicatorpower coated enclosure with PU gasket ensuring excellent finish and reliabilityProvitional for connecting dry run preventorMake-BCH/any approved make of PHED |
| 18 | Supply & delivery of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification: |
| 19 | PumpDuty condition-24 M3/hrHead- 56 MtrShaft-stainless steelImpeller- S.S/ BronzeOutlet Size: 50 mm.Motorsubmersible type 3 Ph , 50Hz, 415 Volt ± 10% 2900 RPM=5 HPMotor must be suitable for operation with star Delta starter. Make -KSB/ Texmo/ Pluga/BG/Any approved vendor of PHED |
| 20 | Supply & fitting fixing of 18w LED tube light including electrical connection complete |
| 21 | Carrying damaged 5/7.5/10/12.5 HP pump-motor set from deptt store to Kolkata workshop including loading and unloading at both ends all complete. |
| 22 | Dismentling the damaged pump motor set at workshop for necessary repairing of the same. |
| 23 | Supply of following spares for pump. |
| 24 | Shaft sleeve (SS) |
| 25 | Suction cage bush (GM) |
| 26 | Neck Ring(GM) |
| 27 | Pump stage bush (GM) |
| 28 | Reassemble the pump set with newly supplied materials in item no ( 8.01-8.04) and old seviceable spares as per direction of EIC. |
| 29 | Supply of following spares for the motor. |
| 30 | Top bush (GM) |
| 31 | Bottom bush (GM) |
| 32 | Thrust bearing |
| 33 | Charges for motor grinding |
| 34 | Rewinding the motor by supplying suitable gauge PVC insulated copper wire & by other required materials as per direction of EIC. (The rate has been derived after deducting the cost of old damaged Cu wire) |
| 35 | Reassemble the motor after rewinding with newly supplied materials in item no (9.01- 9.03) and old serviceable spares as per direction of EIC. |
| 36 | Painting the pump motor set after repair & reassemble by supplying oil bound paint after scraping out the old paint rust as per direction. |
| 37 | Carrying the repaired pump motor set from workshop to deptt storeincluding loading and unloading complete. |
| 38 | Add GST @ 18% |
| 39 | Add CESS @ 1% |
