Tender For Repair/Maintenance To Various Articles Of Steel Furniture Including Polishing/Painting Under Ge (West) Delhi Cantt-10.; 1 TABLE 900X600X760 WITHOUT DRAWER : FD-1007 S & F following components of Tableincluding dismantling taking out carefully & replace old components of Table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-100 2 Replacement of old existing broken top oftable of any description with S&F new table top of size 900mmx600mm made out of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). 3 Dismantling, taking out carefully old existing broken U/S Locks of any description & replacement of the same with S&F new Locks with double key fix with suitable 4mm dia screws complete machine all as shown on drg specified and directed. 4 Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg. 5 Repairs to Drawer include tinkering/denting, painting, welding, etc. all as shown as specified & as directed. 6 Stiffeners as per drg. 7 Shoes all as per drg. 8 Welding work wherever required as directed by EIC 9 M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Table 900mmx600mm without drawer paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/ Berger/Nerolac). 10 TEAPOY VARANDHA : FD-35(M), FD-208, FD-255, FD-383S&F following components of Teapoy Verandah including dismantling taking out carefully & replace old components of Teapoy Verandah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-40 11 Replacement of old existing broken table top of any description with S&F new table top of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). 12 S & F new 25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position as shown in drg. 13 S & F new 25mmx3mm flat iron on top of legs of length 250mm welded to existing flat iron at top placed in position as shown in drg. 14 Replacement of legs of table with S & F new legs. 15 Replacement of rubber shoe with S & F new hard rubber shoe of superior quality. 16 Welding work wherever required as directed by EIC and GE. 17 M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Teapoy Verandah, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). 18 CHARPOY IP HARD TOP : FD/MAP-II/01 S & F following components of charpoy including dismantling taking out carefully & replace old components of charpoy. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-600 19 S & F new 12mm thick commercial BWR Plywood of size 1916mm x 836mm fixed with nut and bolt (10 Nos). All as shown on drgs. (Make of Ply :-Greenply/ Century/ Duro) 20 Replacement of Long railswith S & F New Long rails of size 1980mm x 65mm x 25mm rectungular of 16 Gauge MS pipe 21 Replacement of short railswith S & F New short rails of size 900mm x 65mm x 25mm rectungular of 16 Gauge MS pipe 22 Replacement of leg with S & F New leg of size 440mm x 32mm x 32mm rectangular of 16 Gauge MS pipe 23 Replacement of Stiffner with S & F New Stiffner of size 836mm x 25mm x 25mm square of 16 Gauge MS pipe 24 Replacement of center Stiffner with S & F New center Stiffner of size 836mm x 25mm x 25mm square16 Gauge MS pipe 25 MS Clips for fixing of plywood size 60mm x 25mm x6mm thick and welded with frame of charpoy. All as shown on drgs. 26 Removing old UNSV 32mmx32mm rubber shoes from the legs of charpoy, S & F new 32mmx32mm rubber shoes to the legs of charpoy 27 Welding work wherever required as directed by EIC 28 M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chapoy IP hard top, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/ Berger/ Nerolac). 29 STEEL TABLE OFFICERS/CLERK OF SORTS : FD-84(M),FD-381, FD-1002, FD-1003, FD-1004 S & F following components of table officers/clerk including dismantling taking out carefully & replace old components of table officers/clerk. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty- 240 (Offrs-60+ Clerk-180) 30 Replacement of old existing broken officers table top of any description with S&F new table top of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). 31 All as per item 4.01 here in but top of table clerk. 32 Replacement of drawer with S&F new table drawer made to shape, fixed in position all as shown on drg, specified and directed with Locking arrangement i.e. Key holes etc. 33 Dismantling, taking out carefully old existing broken U/S Locks of any description & replacement of the same with S&F new Locks with double key fix with suitable 4mm dia screws complete machine all as shown on drg specified and directed. (Make :- Godraj/ Harrison/ Nova) 34 Leg (New leg must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg) 35 Stiffener (New stiffener must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg) 36 Replacement of standard PVC Handle with S&F new PVC handle. 37 Welding work wherever required as directed by EIC 38 Replacement of rubber shoe with S&F new hard rubber shoe of superior quality. 39 M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table officers, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). 40 M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table clerk, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). 41 STEEL LOCKER OF SORTS :FD-127(M), FD-257, FD-1029, CEDZ-D-ARC-27 S & F following components of locker Steel including dismantling taking out carefully & replace old components of locker steel. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-500 42 Replacement of Handle with S&F newhandle shall be of non-ferrous alloy with CP Godraj patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE. 43 Replacement of legs with S&F new legs complete all as shown on drg, specified and directed. 44 Replacement of shelf with S & F New shelf complete all as shown on drg, specified and directed . 45 Replacement with S&F new SS conduit pipe 20 mm dia for locker steel or sorts complete all as shown on drg, specified and directed . 46 Chromium plated safety type hasp & staples 47 Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size) 48 Replacement of hinges of steel locker with S&F new hinges SS (Make :- Hettich/ Ozone/ Epco) 49 Welding work wherever required as directed by EIC 50 M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the locker steel, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). 51 STEEL ALMIRAH LARGE :FD-67(M), FD-351, FD-1031 S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-175 52 Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed. (Make :- Godraj/ Harrison/ Nova) 53 Replacement of Handle with S&F new handle shall be of non-ferrous alloy with CP Godrej patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE. 54 Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah large. 55 Replacement of legs of steel almirah large with S&F new legs complete all as shown on drg, specified and directed. 56 Replacement of shelf of steel almirah large with S&F new shelf complete all as shown on drg, specified and directed . 57 Replacement of door shutter of steel almirah large with S&F new door shutter complete all as shown on drg, specified and directed . 58 Replacement of hinges of steel almirah large with S&F new hinges SS (Make :- Hettich/ Ozone/ Epco) complete all as shown on drg, specified and directed. 59 Welding work wherever required as directed by EIC 60 M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Almirah, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). 61 CHAIR VERANDAH:- FD-19, FD-359, FD/MAP-II/06S & F following components of Chair Verandah including dismantling taking out carefully & replace old components of Chair Verandah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-1800 62 Removing the existing U/S cane/niwar plastic from the seat and back of chair and recanning the seat and backof chair with plastic cane 3.5mm to 4mm wide of 1st quality, white colour in pure godrej pattern. The canning of chairs shall only be carried out after complete painting process as specified in drg. MAKE OF CANE- SHAH, PREMIER 63 Removing the existing U/S/broken PVC seat and back from the chair verandah MAP, S & F new PVC seat and back 4mm thick to the chair verandah MAP after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/ COMFO/ HARMONY 64 Replacement of legs of chair varandah with S&F new legs made out of 16 Gauge MS sheet complete all as shown on drg, specified and directed. 65 Welding work wherever required as directed by EIC 66 Removing the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair. 67 M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair Varandah paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). 68 CHAIR REVOLVING/TILTING WITH ARMS STEEL : FD-75(M) S & F following components of chairincluding dismantling taking out carefully & replace old components of Chair Revolving High Back Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-6 69 Taking out U/S seat and S&F new seat with 12mm thickply wood BWR (Make of BWR Ply: Archidlam/ Greenlam/ Century) made to shape for seat, upholstered with Fabric of approved colour and moulded polyurethane foam (Make: Sleepwell/ Springwell/Kurl-on)with PVC lipping all around. 70 Taking out U/S back and S&F new back with 12 mm thick ply wood BWR (Make of BWR Ply: Archidlam/ Greenlam/ Century) made to shape of back, upholstered with Fabric of approved colour and moulded polyurethane foam (Make: Sleepwell/ Springwell/ Kurl-on) with PVC lipping all around 71 Taking out U/S hand rest and S&F new hand rest of black integral skin polyurethane reinforced with MS insert complete 72 Taking out U/S base and S&F new SS 5 star base fitted with twin wheel castors. 73 S & F of Hydraulic system of suitable size and design as per original Pattern of different Make and Model including dismantling of old U/S one for Chair Revolving / Chair Computer / Chair Revolving High or Medium of different Make and Model complete all as specified and directed. 74 BED PLY TOP STEEL : FD/E6/MAP/08 (R) S & F following components of bed including dismantling taking out carefully & replace old components of bed. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-200 75 S & F new 12mm thick commercial BWR ply placed in position fitted with 30/35mm long nut bolts and washers as shown in drg, (Make of Ply :-Greenply/ Century/ Duro) 76 S&F new 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method for headrest of Bed Ply Top Steel duly fitted with screws as shown in drg. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). 77 S&F new 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method for footrest of Bed Ply Top Steel duly fitted with screws as shown in drg. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). 78 High Quality rubber shoes with inside MS washer at bottom 40mm high of size 38mmx38mm. 79 Welding work wherever required as directed by EIC 80 M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Bed Ply Top Steel (MAP) paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). 81 CHAIR STEEL WITH ARMS CUSHIONED : TP S & F following components of chairincluding dismantling taking out carefully & replace old components of Chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-40 82 Taking out U/S seat and S&F new seat with 12mm thickply wood BWR (Make of Ply :-Greenply/ Century/ Duro) made to shape for seat, upholstered with Fabric of approved colour and moulded polyurethane foam (Make: Sleepwell/ Springwell/Kurl-on)with PVC lipping all around. 83 Taking out U/S back and S&F new back with 12 mm thick ply wood BWR (Make of Ply :-Greenply/ Century/ Duro) made to shape of back, upholstered with Fabric of approved colour and moulded polyurethane foam (Make: Sleepwell/ Springwell/ Kurl-on) with PVC lipping all around 84 Taking out U/S hand rest and S&F new hand rest of black integral skin polyurethane reinforced with MS insert complete. 85 Taking out U/S base and S&F new SS 5 star base fitted with twin wheel castors. 86 S & F of Hydraulic system of suitable size and design as per original Pattern of different Make and Model including dismantling of old U/S one for Chair Revolving / Chair Computer / Chair Revolving High or Medium of different Make and Model complete all as specified and directed.
