Tender For Setting Right Of Vacant House No. 339.; 1 Carriage of Materials 2 By Mechanical Transport including loading,unloading and stacking 3 Lime, moorum, building rubbish Lead - 2 4 EARTH WORK 5 Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: 6 All kinds of soil 7 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 8 Supplying chemical emulsion in sealed containers including delivery as specified. 9 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 10 CEMENT CONCRETE (CAST IN SITU) 11 Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth 12 1:2:4 (1Cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) 13 Makingplinthprotection 50mmthickofcementconcrete 1:3:6 (1cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 14 REINFORCED CEMENT CONCRETE 15 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 16 Centering and shuttering including strutting, propping etc. and removal of form for 17 Shelves (Cast in situ) 18 Steelreinforcement forR.C.C.workincludingstraightening,cutting, bending, placing in position and binding all complete above plinth level. 19 Thermo-Mechanically Treatedbars of gradeFe-500D or more. 20 MASONRY WORK 21 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 22 Cement mortar 1:6(1 cement : 6 coarse sand) 23 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : 24 cement mortar 1:4(1 cement :4 coarse sand) 25 CLADDING WORK 26 Providingandfixing 18mmthickgangsawcut,mirrorpolished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters,window sills,facias andsimilar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 27 Granite stone slab of colour black, Cherry/Ruby red 28 Area of slab over 0.50 sqm 29 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 30 WOOD AND P. V. C. WORK 31 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 32 250x16 mm 33 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 34 150x10 mm 35 100x10 mm 36 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 37 125 mm 38 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 39 250x16 mm 40 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 41 150x10 mm 42 100x10 mm 43 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 44 100 mm 45 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 46 Twin rubber stopper 47 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 48 35 mm thick shutters 49 withISImarkedM.S.pressedbutthinges bright finished of required size 50 Second class teak wood 51 Construction of Modular kitchen in Type - III houses.1 Meta Drawer 1 each 470*500*86 mm2 Perforated Cutlery 1 each 470*485*100 mm3 Thali Basket 1 each 470*485*140 mm4 Corner 1 each Blank5 Drawer Basket 2 each 420*485*140 mm6 Drawer Basket 2 each 420*485*140 mm7 Rack 1 each 100*485*420 mm8 Glass & Plate Rack including Drip Tray 1 each 560*230*25/65 mm9 Marble 12 each 10 Wooden Partition 4 each 11 Full extention ball bearing sliding telescopic 7 set 12 Solid Shutters 6 sqm 13 Glass Shutters 0.4 sqm 14 Auto Closing Concealed Hinges 6 15 Auto Closing Concealed Special Corner Hinges 2 each 16 Handles 16 each 17 Hardware (Screws counter sunk, Connect Fastners, Tags) 18 Fixing & Installation of the complete modular kitchen. With Below Specifications(1)Everyday/Hettich/Steel Art Brand Baskets of AISI 304(18/8) in combination of6mm, 3mm thick wires with bended and raised base wire base in Chrome/Nickel Stainless Steel with Test Certificate for salt spray, resistance to corrosion, stain, scratch and loading capability, Rust Free, Non Magnetic, Extremely Durable (2) Baskets to be used with full extension ball bearing sliding Hettich/Hafele Brand telescopic 45 kg capacity. (3) Shutters to be mounted on Hettich/Hafele Brand Auto Closing Concealed Hinges . (4) DMS/ Dynasty/ Indoline Brand Shutters of 19 mm Mica based Marine Ply Post Form Finished withGerman Qtr Round Edgeand PVCTape at top and bottom. 52 STEEL WORK 53 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 54 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, allnecessary fittingscomplete,includingapplyingaprimingcoat of approved steel primer. 55 Using M.S. angels 40x40x6 mm for diagonal braces 56 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing andmakingcurvature(wherever required)andfittingthesame with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 57 FLOORING 58 Providing andlayingCeramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 59 Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 60 Double charge vitrified tile polished finish of size 61 Size of Tile 600 x 600 mm 62 Glazed Vitrified tiles Matt/Antiskid finish of size 63 Size of Tile 600 x 600 mm 64 ProvidingandlayingVitrifiedtilesindiferent sizes (thickness tobe specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 65 Size of Tile 600x600 mm 66 FINISHING 67 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 68 1:4(1 cement: 4 fine sand) 69 6 mm cement plaster of mix: 70 1:3(1 cement :3 fine sand) 71 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 72 Two or more coats on new work 73 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 74 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 75 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 76 White washing with lime to give an even shade: 77 Old work (two or more coats) 78 Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth including necessary repairs to scratches etc. complete 79 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 80 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 81 One or more coats on old work 82 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 83 Old work (one or more coats applied @ 0.83 Itr/10 sqm). 84 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coats on new work 85 REPAIRS TO BUILDING 86 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 87 With cement mortar 1:4 (1cement: 4 coarse sand) 88 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 89 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 90 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in- charge. 91 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. 92 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall 93 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 94 Dismantling and Demolishing 95 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 96 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 97 Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) 98 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 99 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 100 SANITARY INSTALLATIONS 101 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 102 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 103 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 104 W.C. pan with ISI marked white solid plastic seat and lid 105 Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 106 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia 107 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : 108 Flat back wash basin of size 550x400 mm 109 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 110 Providing and fixing soil, waste and vent pipes : 111 100 mm dia 112 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 113 75 mm diameter : 114 Centrifugally cast (spun) iron socketed pipe as per IS: 3989 115 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 116 100 mm dia 117 Sand cast iron S&S as per IS - 3989 118 75 mm dia 119 Sand cast iron S&S as per IS- 3989 120 Providing and fixing plain bend of required degree. 121 100 mm dia 122 Sand cast iron S&S as per IS : 3989 123 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 124 100x100x100 mm 125 Sand cast iron S&S as per IS - 3989 126 Providing and fixing collar : 127 100 mm 128 Sand cast iron S&S as per IS - 3989 129 75 mm 130 Sand cast iron S&S as per IS - 3989 131 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 132 100 mm 133 75 mm 134 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 135 100 mm inlet and 100 mm outlet 136 Sand cast iron S&S as per IS: 3989 137 100 mm inlet and 75 mm outlet 138 Sand cast iron S&S as per IS - 3989 139 WATER SUPPLY 140 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 141 32 mm nominal dia Pipes 142 Providing and fixing uplasticised PVC connection pipe with brass unions : 143 45 cm length 144 15 mm nominal bore 145 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 146 15 mm nominal bore 147 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 148 15 mm nominal bore 149 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 150 15 mm nominal bore 151 Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. 152 Cutting holes up to 30x30 cm in walls including making good the same: 153 With common burnt clay F.P.S. (non modular) bricks 154 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 155 DRAINAGE 156 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 157 For pipes 100 to 250 mm diameter 158 WATER PROOFING 159 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 160 NEW TECHNOLOGIES AND MATERIALS 161 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type orof approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 162 25 mm average thickness 163 Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as perspecifications and direction of Engineer- In-charge complete in all respect. 164 Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make 165 Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used)as per specifications and directions of Engineer-in-charge.Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 166 25 mm average thickness in 2 layers. 167 Minor Civil Maintenance Work 168 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources: 10 graded brick aggregate 40 mm nominal size derived from natural sources) 169 P/F C.P brass towel rod complete with two C.P.brass brackets fixed to wooden cleats with C.P. brass screws of approved quality size of 600 x 20 mm. 170 Providing and fixing C.P. grating with or without hole for waste pipe for floor/ nahani trap 100 mm dia. weight not less than 100 grams. 171 Providing and fixing C.P flange for C.P bib cock/C.P angle stop cock. 172 Providing and fixing C.P Brass shower rose 15 mm or 20 mm inlet with shower arm (a) 75 mm dia fancy type. 173 Providing and fixing C.P. waste 32 mm dia of make L&K for wash basin / sink. 174 Providing and fixing ISI marked flush door shutter non decorative type, core of block board construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked M.S butt hinges with necessary screw complete. 175 Providing and fixing fly proof stainless steel grade 304 wire gauge, to Aluminumwindows and Aluminum clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm, with all necessary complete. 176 Providing and fixing C.P waste 40 mm nominal bore for china sink or wash basin (L&K) make. 177 Providing and fixing C.P basin mixer of 15 mm nominal bore (L&K) make etc. complete 178 Providind and fixing C.P. hand spray (heath faucet) jaquar make or equivalant with push button control and flexible hose connection with C.P hook complete in all respects. 179 Providing and fixing aluminum door seal in door i/c necessary screw etc complete.
