Tender For Carried Out Civil Related Work At Behind Kasarwadi Pimple Udyan Area In Ward No 20.-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for thefoundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means Removing and Transporting of excavated / demolished material within PCMC limit including loading, unloading, stacking the material as directed by Engineer-in-charge etc. complete. (For Lead 10.0 Km). Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material Note- As per circular issued by Hon. City Engineer, PCMC vide circular no.Civil/CE/TS/23/16/2023 Dated 21/04/2023, rate is reduced to 20% as material is to be brought from C and D work processing plant Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Lift 0.0 to 3.8 M Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor Lift 0.0 to 3.8 Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete Ground Floor Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shadeetc. complete. Ground Floor Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fi ttings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C .channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram. etc complete Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100Kilogrametc. complete. Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (140 Kilogram) Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete.Medium duty (100 Kilogram) Providing and fixing cautionary / warning sign board of size 60 cm. having shape of equilateral triangle with apex point upwards. prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc.complete. 60 cm. equilateral triangle M.S. sheet with Engineering grade, Providing and fixing Mandatory / Regulatory sign board of circular shape of size 60 cm. dia. prepared on 16 gauge M.S. sheet including painting with zinc chromate stoving primer and two coats each of white back ground,red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border, coated with non pealable crystal clear protective transparent coat retaining 100% relection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.45 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long includingall taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc. complete. circular shape of size 60 cm. dia. M.S. sheet with Retro reflective sheet Engineering grade Providing and fixing sign boards of size 90cm having shape of an equilateral triangle made out of 14 gauge sheet with retro reflective sheeting of Engineering Grade as per M.O.T. specification No. 801-3(1993) white reflective back ground, lettering symbol bordering of black non reflective paint including M. S. angle iron back frame of size 35 mm X 35 mm X 5 mm and M.S.angle one post of 50mm x 50mm x 5mm size 3.45 metre long duly painted with white and black bands including fixing M.S. angle of the boards with galvanised nuts and bolts and washers. The Board shall be as per IRC-67-1977 including conveying fixing in ground with C.C. 1:4:8 block of size 0.60 x 0.60 x 0.75 m, with 7 year guarantee for the sheeting etc. complete. Mild Steel Board with Engineering Grade Providing and fixing road junction/information sign boards of size 1.80 x 0.90 Meter Prepared 16 guageM.S.sheet on frame of M.S.angle of size 35 x 35 x 5 mm with cross bracing of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral /arrows, coated with non pealable crystal clear protective transperent coat retaining 100% reflection including two angle iron post of size 65 x 65 6 mm of 3.65 m. long inflated at bottom ,drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long. Sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer- in- charge etc. complete. Mild Steel Board with Engineering Grade. Providing and fixing road junction/ information sign boards of size 1.80 x 0.90 Meter Prepared 16 guage Alluminium sheet on frame of size 35 x 35 x 5 mm with cross bracing of size 35x35x5 mm including bonded with IRC Specified colour of retro reflectivesheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border and messages having pressure sensitive adhesive having border and messages inIRC Specified colour background including two angle iron post of size 65 x 65 x 6 mm of 3.65 m. long inflated at bottom drilled on top and painted in whiteand black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer- incharge etc. complete. Alluminium sheet Type IV High Intensity Micro-Prismatic Grade Sheeting. Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 40 x 6 mm angles both side every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. Hire charges for JCB 3D(8 to10 MT) including operator, disel , oil and other necessary maintainance , labour etc. complete. Hire charges for Truck 5.5 cum per 10 tonnes including operator, disel, oil and other necessary maintainance, labour etc. Supplying mazdoor/unskilled heavy male labour etc. Hire charges for tractor with trolly including operator, disel, oil and other necessary maintenance labour etc complete Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Ground Floor Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat) Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ cement concrete of 1:2:4 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Supplying hard murum/ kankar at the road site, including conveying and stacking complete. Spreading hard murum/ soft murrum/ gravel or kankar for side width complete Providing and fixing chember of 900x900x1200mm size In B.B. Masonary 23cm thick in CM 1:4 with cement plaster (1:4) 20mm thk on Inner side CC M-25 for frame and cover fixing 10cm thk including additional excavation required with providing and fixing approved make quality SFRC (40 tonne capacity and cc M-25) frame and cover as directed by engineer in charge (Add/deduct for every additional and reduced depth of 0.10m of chember) asper SSR 2018-19 2022-23 Providing and fixing in position precast steel fibre reinforced concrete (SFRC) Perforated Frame cover of M-25 grade without SCADA as per approved drawing, design and specifications including loading unloading, transportation, all taxes etc. complete as directed by engineer incharge (40 tonnes capacity) size 1100 X 1100mm. RAC-4623 Providing and Fixing Precast tapering R.C.C. M-40 grade Kerbs type VI-B-with weep holes of PVC pipe 50mm Dia (as per detailed drawing attached), in R-40 IRC specification (1000X250X150X350) embeded 200mm below ground neately with fixing in position cement morter 1:2 etc. complete, including redoing the surface as specified and directed by Engineer in Charge, including transportation, loading, unloading and including all other taxes and excluding GST. (Approved R. A. as per SSR Year 2021-22) Providing and laying Natural Flair Shot blasted paver block of 60mm thick non-slippery concrete paving blocks of size 247.50 x 165.00 x 60mm thickness, the paver block should be of bevelled edges with face of block giving undulating guide, in grey and brown colour as per the IS 15658- 2006, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm. The block should have exposed aggregate be shot blasted and bossed surface material made of high quality aggregate with colour UV stabilized and made from rich oxides. Block to be manufactured in fully automatic ISO certified vibration compaction machine having strength of M40 and cured in controlled temperature through mist. Transportation and fixing on site with all material and labour, including transportation, loading, unloading and all other taxes and excluding GST.-Grey colour Providing and fixing of Tactile Tiles for footpath of size 300 x 300mm and 60mm thick of approved colour with top grooving of 260mm(L) x 35mm(w) x 5mm thick by leaving 20mm cover distance from corner edge and at 75mm centre for Directional Tactile tile and top grooving of 25mm dia. 5mm thickness placed at 50mm centre to centre distance by leaving 20mm cover distance four sides for warner Tactile tile. Having high strength and high wear resistant cement concrets Tactile Tiles. The Tactile Tiles must confirm to IS 13801:1993. Laying Tiles in position over prepared bed of natural sand / crushed sand of 50 mm. Tiles must be manufactured on automatic machines with mechanical vibration and rubbenzed moulds. The Tiles will be made using wear resistant material in the face mix as specified by the architects. Tiles must be cured in controlled environment to ensure efflorescence free material Colour as specified by architect, using UV resistant colour pigments from laxness as per detailed drawings and specifications and as directed by Engineer in charge for road works only. Including transportation, Loading, unloading and all other taxes and excluding GST. RAC-4638 Supply and fixing Precast cement concrete cylindrical Bollard of size (as per detailed drawing attached) and 950 mm height (650 mm above finish level of 150 mm diameter manufactured ty M-30 grade of concrete (with VSI quality standard Artificial Sand) byvibr compaction process using FRP moulds and painting with approved weather sheild palint of approved colour and texture single and douc groove cut inside of 10 mm width and 75 mm wide placed at 150 mm from top finish (reflective fluorescent tape should be sticker at 75 mm grooved placed) as per detal drawing as directed by engineer in charge. including transportation woading, unloading an luding all other taxes and excluding GST RAC-4637 Painting waterproof wall sign boards with writing slogans and pictures for environment awareness in PCMC area with approved water proof, good quality material (Apex Paint) and labour as per direction of engineer in charge.(with 5 years guarantee) Excluding GST 1,005.000 Removing and Refixing of interlocking concrete paver blocks of all thickness of plain finish / colour or any size and shape, fixing on 50mm stone grit bedding laid in proper position. Levelling, filling, joints with stone dust, compacting by compactor as per IRC 063, cleaning including loading, unloading, transporating etc. complete as directed by Enginer in charge. has context menu Repairing of old circular manhole chamber up to a depth of 0.50m. With out Frame and Cover RAC-4673 Cleaning of strom water drain line chamber of any size and depth including cost towards all tools, labours/machineries required, for leads and lifts, including disposals of all type debries, slit removed from chambers etc. excluding GST, complete and as directed by Engineers incharge.
