Tender For Special Repairs To Ships Gymnasium Building (P-4) At Ins Chilka; 1 Taking down existing waterproofing treatment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100Mand applyingM&L water proofing treatment to roof as per per manufacturers instructionswith the following specification:-.(a) 15 mm thick plastering in cement mortar 1:4 mixed with and including water proofing compound @3% by weight of cement including preperation ofroof surfaces.(b) Applying evenly a coat of bitumineous primer @ 0.5 litre per Sqm(c) Applyingevenly a coat of hot blow bitumen 85/25 grade @ 1.2 Kg per Sqm (d)Applying APP based polymeric membrane minimum 3 mm thick and minimum weighing 3kg/sqmlaid on primed surface by LPG forced torch application with a side & end overlaps of minimum 100 mm.(e) Applyingevenly a coat of hot blown bitumen 85/ 25 grade @ 1.2 Kg per Sqm over water proofing membrane (f)Applying a coat of bituminous basedaluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturers instructions 2 Supply only water proofing compound. 3 Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified. 4 Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each but with shutters (without taking off shutters from the frames) all as specified. 5 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid forseparately).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. 6 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge)minimumcompressivestrength 50 N/mm2, modulus of elasticity 850 N/mm2 andresistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVCfoil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and as directed. 7 S&F Factory made solid panel PVCWood grain printed door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded Wood grain printed colour PVC C channel having a Wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Wood grain printed colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of Wood grain printed colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable Wood grain printed 5 mm thick and 15 mm wide sheet beading, and joined together with solvent cement,and decorative PVC beading10mmx10mm(90degree)used instead of exposed portion of PVC sheet beading suppling & fixing in the frame at site as per specification & drawing as directed 8 S&F medium weight, stainless steel butt hinges of 100mm size,complete all as specified and as directed. 9 S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 125mm fixed complete all as specified and as directed. 10 S&F extruded aluminium alloy handles, 125mm longfabricated type, anodised all as specified and as directed. 11 S&F 250 mm long aluminium anodised, sliding door bolts, with hasp staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and as directed 12 S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and as directed. 13 S&F floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue with hard drawn steel spring, fixed in floor complete all as specified and as directed. 14 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) withextruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dashfasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom andsideswithrequired EPDM rubber/ neoprene gasketetc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. 15 S&F for powder coated of any colour (thickness of powder coating not less than 50 micron)aluminium door shutters, aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified. (Note :glass and paticle board shall be measured seperatly.) 16 S&Fpowder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified 17 S&Fpowder coated of any colour (Thickness or powder coating not less than 50 micron) aluminium sliding window and ventilator shutters without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium anodised fittings including locking arrangement and all accessories commplete all as specified and as directed. (Note :glass shall be measured seperatly.) 18 S&F 4 mm thickness of sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and as directed.Make : Hindustan,Pilkinton glass works Ltd/Modiguard. 19 S&Fstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadingscomplete all as specified and as directed 20 S&F Aluminiumpowder coated of any colour (thickness of powder coating not less than 15 micron)with Deco grill aperature size 50X50mm fixed with suitable channel for windows/ventelator fixing arrangements all as specified and as directed. 21 M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like fixed over and including 20mm screed bed ofcement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and directed. 22 M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall),riser of steps fixed over and including 10mm thick rendering in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 23 M & L for providing and fixing stainless steel tube (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. 24 S&F stainless steel handrail ball( grade 304) 50mm dia on top of stainless steel tube andfixing arrangements all as specified and as directed. 25 Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified andas directed. 26 Roughening surfaces of old concrete floor and of plaster of wall by picking, sweeping clean and washing down with water to remove dust, etc. 27 M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed. 28 S&F semi perforated 12mm thick micro tegular edged GRG false ciling tiles at all height with GRG (Glass fibre reinforced gypsum) false ceiliing tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%,humidity resistance of 99% ,NRCO 0.50 to 0.75 as per IS 8225 : 1987 , noncombustible as per BS 476 (Part-4) 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides ) comprising of amin T runners of size 15x32mm of length 3000 mm , cross T of size 15x32 of length 1200mmand secondary intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600x600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) ie 50mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shaped level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on priphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per specification and as directed. 29 Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed. 30 M&L for RCC type B1 (1:2:4) using 20 mm grade aggregate in slabs suspended on walls , beams and columns in floors, roofs, landings, balconies, canopies, deckslabs and in shelves and the like complete all as specified and as directed. 31 S & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips 32 Ditto, but 5mm dia and over upto andincluding 10mm dia in stirrups, spacers and binders etc all complete. 33 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. 34 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) 35 Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide 36 Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. 37 S&F Coloured Non Skid ceramic tiles7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.36 sqm,in floors etc set and joint in neat cement slurry and pointed in white or colour cement to match fixed over andincluding 15mm thick rendering in CM 1:4 complete all as specified and as directed 38 S&F Coloured Non Skid ceramic tiles7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm,in floors etc. Including on skirting upto 150 mm height, set and joint in neat cement slurry and pointed in white or colour cement to matchthe tiles fixed over and including 15 mm thick screed in CM (1:4) complete all as specified and as directed 39 S&F Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting / dado tiles fixed over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed. 40 M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified andas directed. 41 S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination ,fixed with screws to timber frame work all as specified and as directed. 42 S&F 18/19 mm extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed. 43 S&F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when open) 30 mm etc complete all as specified and as directed 44 S&F extruded brass handles, 100mm longcast type, anodised all as specified and as directed. 45 S&F cupboard magnetic catcher fixed to cupboard shutter as per specified and as directed. 46 S&F aluminium anodised 100 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate all as specified and as directed. and fixed with screws etc all completed. 47 S&F in repairs 5mm thick bevelled edge looking mirror of size 600x450mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 48 S&F in repairs wash hand basinvitreous china white flat back of size 580 X 450mm with brackets, completeall as specified and as directed. 49 S&F in repair 15mm bore dia fancy typePillar taps, cast copper alloy, with or without lettered Hot or cold with capstan heads, chromium plated, crewed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. 50 S&F 32/40mm bore and 80 cm long PVC waste pipe for WHB, sink complete all as specified and as directed.Make : Prayag ,Cat No : 3272 51 S&F in repairs PVC connections 15 mm size with PTMT nuts and washers for 600mm long pipe complete all as specified and directed 52 S&F in repair PVC floor trap with out grating including jointing with solvent cement to waste pipe 75 mm dia etc all complete. 53 S&F in repairs 102mm dia grating doomof fancy chromium plated complete all as specified and directed(Make : Prayag,Cat No FT03M) 54 S&Fin repairs angle valves of 15 mm dia chromium plated fancy type screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge (Make : Parryware,Cat No G5307A1) 55 S&F in repair water closet pedestal vitreous china white pattern (EWC) including white colour seat cover and connection to drain and to flush pipe & mild steel chromium plated or aluminised hinging device etc (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge. 56 S&F in repairs PVC low level flushing cistern of 10 ltr capacity fixed including syphonic action type, ball valve, float and handle including brackets etc complete all as specified and directed 57 S&F (EWC) plastic water closet seat, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or CP hinging device complete all as specified and directed. 58 S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified. 59 S&F in repair 15mm bore dia CP two way bib tap cast copper ally fancy type screwed down high pressure, with long shank screwed and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.Make : Prayag Cat No P6812.. 60 M&L for 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 61 S&F in repair PVC soap tray (Make : Prayag Cat No 195) fixing with screw in the all as specified 62 S&F in repair CP tubular rail, 20mm dia D type 600mm long as in repair, brass chromium plated and fixed all as specified and directed by Engr-in-Charge 63 S&F in repairs vitreous china urinal bowl flat back of size 465 X 355 X 265mm white with grating,union and waste coupling including fixing plugs, beding urinal against wall in CM 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed. 64 S&F in repair Vitreous china urinal partition white of size 310x700 mm slabs terminating about 40cm above floor line complete all as specified and as directed. 65 Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. 66 S&Fin repairs PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 110 mm bore. 67 S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 75 mm bore. 68 S&Fin repairs 110 bore PVC (SWR) bends any radius complete all as specified and directed 69 S&F in repairs 110 bore PVC (SWR) vent cowl complete all as specified and directed 70 S&F in repairs 75 bore PVC (SWR) junction single, (Single T) equal or unequal with access doorcomplete all as specified and directed 71 S&F in repairs75 bore PVC (SWR) bends any radius with access door complete all as specified and directed 72 S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltr capacity including provision of inlet, outlet overflow and wash out connections Complete all as specified and as directed. 73 S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltr capacity including provision of inlet, outlet overflow and wash out connections Complete all as specified and as directed. 74 S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed with necessary fittings for iron pipe size 20 mm dia/bore and fixed (Minimum weight 20mm-210 gms) 75 S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe andfixed in repairs of size 20 mm dia/bore complete all as specified & directed. 76 S&F in repairs 25mm bore of tubes, medium gradegalvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 77 S&F in repairs 15mm bore of tubes, medium gradegalvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 78 Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed. 79 M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in as in floors, hardstanding laid in alternate bays ( n exc. 4 Sqm each) and finished even and fair( without using extra cement) complete all as specified and directed. 80 M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand as specified and directed byEngr in Charge. 81 M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in copingincluding necceesry form work complete 82 M&L for Framed work such as Louvers, hold fasts etc. with ends ofbars shouldered and/or riveted, or forged into spikes;conforming to Fe-290-0(Gde-E-165), complete all as specified. 83 Taking down plaster of any description on brick or stone walls, ceilings, fins, fascias, chajjas, parapets etc. (including tiles) raking outjoint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and directed. 84 M & L15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete curfaces mixed with water proofing compound 2% by weight of cementfinished even and fairn andsmooth without using extra cementcomplete all as specified and directed.Note : Water proofing compound shall be measured and paid separately. 85 M&L for rendering 10mmthick on fair faces of brick or concrete sufaces in cement mortar 1:6, including finishing even and fair without using extra cement complete all as specified and as directed. 86 M&L 5 mm thick rendering in CM 1:3 on ceiling including finishing the surfaces even and smooth, without using extra cement etc complete all as specified and directed. 87 M&L for preparation of newly plastered or unplastered surfaces of wall and applying three coat white wash complete all as specified and directed. 88 M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coat white wash complete all as specified and directed. 89 M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat oil bound distemper over applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smoothcomplete all as specified and directed. 90 M&L for preparation of new plastered external wall with two coat of Acrylic Smooth exterior paint applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per manufacturers instructionas per required shade by user complete all as specified and as directed. 91 M&L for complete removal of existing treatment from old decorated plastered surface of wall by vacum based sanding machine,removal of nails etc & filling cracks/hole and applying two coat oil bound distemper over applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smoothcomplete all as specified and directed. as per specified and directed by manufacturers instructions. 92 M&L for complete removal of existing treatment from old decorated plastered surface of wall by vacum based sanding machine,removal of nails etc & filling cracks/hole and with two coat of Acrylic Smooth exterior paint applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per manufacturers instructionas per required shade by user complete all as specified and as directed. 93 M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and gressy spots and applying two coat of white wash on ceiling complete all as specified and directed. 94 M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and gressy spots and applying two coat of white wash on walls complete all as specified and directed. 95 M & L for preparing new steel surfaces of any description over 10 cm girth and width and applying two coat of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified. 96 Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed . 97 M&L for point wiring with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thickswitch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessarywall cutting and making good disturbed surface allas directed and specified.(Make of wire: .(Make of wire: Finolex/Polycab/Plaza Make of PVC Conduit :-Plaza/Prestoplast/Precision) 98 Ditto alll as per above items but one 3 pin socket outlet 5 Amps on same board. 99 Ditto alll as per above items but one 3 pin socket outlet 5 Amps but independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty. 100 Ditto alll as per above items but for 5/15 Amps point on independent board with two runs of 2.5 Sqmm FRLSH grade PVC insulated unsheathed stranded Copper conductorand 2.5 Sqmm, FRLSH grade PVC insulated, unsheathed, stranded copper conductor as earth wire. 101 S & F in repairs Sub main wiring usingtwo runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 1.5 Sqmm and one run of 1.5 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note :Two runs of 1.5 Sqmm copper wire,one run of 1.5 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza,Make of PVC Conduit:-Plaza/Prestoplast/Precision) 102 S & F in repairs Sub main wiring usingtwo runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 2.5 Sqmm and one run of 2.5 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable sizeand all as specified.Note :Two runs of 2.5 Sqmm copper wire,one run of 2.5 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza,Make of PVC Conduit:-Plaza/Prestoplast/Precision) 103 S & F in repairsSub main wiring usingtwo runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 4.0 Sqmm and one run of 4.0 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable sizeand all as specified.Note :Two runs of 4.0 Sqmm copper wire,one run of 4.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza ,Make of PVC Conduit-Plaza/Prestoplast/Precision) 104 S & F in repairs Sub main wiring usingtwo runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size6.0 Sqmm and one run of 6.0 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note :Two runs of 6.0 Sqmm copper wire,one run of 6.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza, Make of PVC Conduit :-Plaza/Prestoplast/Precision) 105 S & F in repairs Sub main wiring usingtwo runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 10.0 Sqmm and one run of 10.0 Sqmm FRLSHgrade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note :Two runs of 10.0 Sqmm copper wire,one run of 10.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza, Make of PVC Conduit :-Plaza/Prestoplast/Precision) 106 S&F Ceiling rose,3 terminalPVC/poly carbonate isolated body. Make:- Anchor / Cona/Havells. 107 Supply and fixing of modular switch one way 6 Amps 1 Module complete all as specified and directed.(Make : (Crabtree/Cona/Havells) 108 Supply and fixing of modular switch one way 16 Amps 1 Module complete all as specified and directed.(Make : (Crabtree/Cona/Havells) 109 Supply & fixing modularsocket outlet2 /3 pin 6 Amps 2 modules complete all as specified and directed. (Make : (Crabtree/Cona/Havells) 110 Supply & fixing modularsocket outlet2 /3 pin 6/16 Amps 2 modules complete all as specified and directed. (Make : (Crabtree/Cona/Havells) 111 Supply and fixing of Modular Fanregulator,120 watts (Make : (Crabtree/Cona/Havells) 112 Supply and fixingwhite modular cover plate with frame 1 Module complete all as specified and directed.(Make : (Crabtree/Cona/Havells) 113 Supply and fixing white modular cover plate with frame 2 Module complete all as specified and directed.(Make : (Crabtree/Cona/Havells) 114 Supply and fixing white modular cover plate with frame 3 Module complete all as specified and directed.(Make : (Crabtree/Cona/Havells) 115 Supply and fixing white modular cover plate with frame 4 Module complete all as specified and directed.(Make : (Crabtree/Cona/Havells) 116 Supply and fixing white modular cover plate with frame 6 Module complete all as specified and directed.(Make : (Crabtree/Cona/Havells) 117 Supply and fixing white modular cover plate with frame 8 Module complete all as specified and directed.(Make : (Crabtree/Cona/Havells) 118 Supply and fixing modular metal flush box 1/2 Module complete all as specified and directed. 119 Supply and fixing modular metal flush box 3 Module complete all as specified and directed. 120 Supply and fixing modular metal flush box4 Module complete all as specified and directed. 121 Supply and fixing modular metal flush box 6/8 Module complete all as specified and directed. 122 S&F in repairsMCB DB made of sheet steel phosphatised, powder painteddouble door with bus bar, neutral link, earth bar and din rail of SPN 4 way, 240 Voltsfixed in wall,making good disturbed surfaces,complete all as specified. (Make/Model:Cat No:DBSPN006DD of L&T or Standard/Legrand/HPL//Havells) 123 S&F in repairs MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 12 way, 240 Volts double door fixed in wall , making good disturbed surfaces,complete all as specified.(Make : L&T/Legrend/Havells 124 Supply and fixing in repairs of VTPN double door load line DB LL 12 Way DD VERT W/O MCCB double door suitable for TP/FP G frame MCCB and fitted with bus bar, neutral links and blanking plate, IP-43 ( Make/Model- DHDLVDOBGSFE12 of Havells or Equivalent of Standard/Legrand/HPL/L & T). 125 S&F MCCB 4 pole, with fixed thermal & magnetic release of breaking capacity 36 kA, 415 Volts,160 Amps.(Make:vells/Standard/ Legrand/HPL/L & T) 126 S&F in repairs MCB, TPN 63 Amps rating 240, volt, C series, 10 kA (Make Havells DHMZCTNF063 or Standard/Legrand/HPL/L & T) 127 S&F in repairs MCB, SPN. 32 Amps rating 240, volt, C series, 10 kA (Make Havells DHMZCSNF006-032 or Standard/Legrand/HPL/L & T) 128 S&F in repairs MCB, SPN. 63 Amps rating 240, volt, C series, 10 kA (Make Havells DHMZCSNF060 or Standard/Legrand/HPL/L & T) 129 S&F MCBin replacement SP, 6-32 Amps, 240 volt, C Series, 10 kA ( Make Havells,Cat No.DHMZCSPF006-032 or equvalent to Standard/Legrand/HPL/L & T) 130 Supply and fixing in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified and directed.Make Phillips/Havells/ Bajaj/ Wipro/ Crmton 131 Supply and fixing in repairs High-quality design LED Tube lightfittings in extruded aluminium housing with high quality PC diffuser 1x20 wattwithenhances safety and relible ,robust housing structurewith decorative end caps complete with all accessories internallypre-wired and including connecting up with twin core twisted flexible copper conductor cable includingtaking down old light fittings complete all as specified and directed. ( Make /Model No :- CCS-100-20-65-HL2-DP-NWH(BRIGHT LINEA) of Crompton or equivalent ofPhillips/Havells/ Bajaj/Wipro ) 132 Supply & fixing in repair Building security light fitting 30 Watt new compact designed , ASTRA NEO street lights are made up of pressure die cast housing with toughened glass and high power LEDs with secondary optics and IP65 protection. Efficacy ≥ 110LPW.including provn of necessary connection complete.(.(Make/ Model:- Crompton(ASTRA NEO), Cat No . LSTS-25-CDL-Mor equvalent to Phillips/Havells/ Bajaj/Wipro) 133 Supply and fixing in repair of GI pipe Bracket of 40 mm dia Medium grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata) 134 Supply and fixing in replacement of DP switch with indicater-2M, 32 Amp suitable for Split/ window AC (On Off Switch) all as specified and directed Make Havells (DRO White) CAT No AHOMDIW32or equvalent to Standard / Legrand/HPL/L & T) 135 M&L for Earthing with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick,buried directly in ground(earth pit not less than 2.25 meters deep below ground Level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised Iron Wire of size4.0 mm as earth lead by means of bolts, nuts, check nuts and washers etc, GI earth lead strip duly protected by 40 mm dia GI pipe (light grade) and 20 MM GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 Mtrs, PCC (1:3: 6)type C1 as in concrete pit,50mm thick precast RCC (1:1.5:3) type A1 as in cover slab duly reinforced with 8 mm dia TMT bar @ 100 mm c/c both way and two nos lifting handle made cut of 10 mm dia TMT bar and set in cement mortar (1:4), testing etc complete and as specified in electrical plate No 3 of SSR part-I including taking down old earthing plate & GI Wire 136 Supply & fix in repairs LED Recessed full lit luminaire with glare free uniform illumination with longer life and less maintenance 36 Watt 2x2 LED Fitting Complete all as Specified and directed Make Crompton Cat Part No:- LCTLRNE-36-FO- CDL/Havells/wipro/Orient 137 Supply & fix in repairs LED Recessed full lit luminaire with glare free uniform illumination with longer life and less maintenance 18 Watt 1x1 LED Fitting Complete all as Specified and directed Make Crompton Cat Part No:- LCTLRNE-18-CDL(1X1)/Havells/wipro/orient 138 Taking down the ceiling fan of any sweep of any make by disconnecting electric connection from ceiling rose, for carrying out necessary repair such as replacement of old condensers/ rubber bushes/ bearing/ flexiblecopper cable of suitable size including overhauling by carrying out repair such as applying grease to metal parts, rewinding of burnt coil and replacement of suitable size of cotter/split pin as required,reassembling and re - fixing in original position, commissioning, testing complete all as directed by the Engr-in-Charge.Notes :- (a) Rewinding of fans and spares replaced shall be measured and paid seperately under relevent items of schedule.(b)Rate deemed to be inclusive of new flexible copper wire between ceiling rose to fan connector no extra claim what so ever will be entrained by the department. 139 Taking down the Exhaust fan/wall mounting fan heavy duty of 300/380/ 450 mm sweep by disconnecting from the ceiling rose, carrying out necessay repair such as replacement of capacitor/ bearings/ flexible copper cable of suitable size including overhauling by carrying out repair such as applying grease to metal parts, rewinding of burnt coil and replacement of suitable size cotter/split pin as required, reassembling and refixing in original position, fixing of louvers/wire mesh commissioning, testing complete all as specified and directed by Engr-in-Charge. Notes :- (a) Rewinding of Exhaust fans and spares replaced shall be measured and paid seperately under relevent items of schedule.(b)Rate deemed to be inclusive of new flexible copper wire between ceiling rose to fan connector no extra claim what so ever will be entertained by the department. 140 Supply and fix in repair ceiling fan oil capacitor/condensers 2.5 mfd of approved make complete all as directed by Engineer-in-Charge.MAKE : NICCO/Havells/Universal. 141 Supply and fix in repairexhaust fan capacitor4 mfd of approved makecomplete all as directed by Engineer-in-Charge.MAKE : NICCO/Universal/Havells. 142 Supply and fix in replacement of louvers suitable for 450 mm sweep exhaust fan made out of GI sheet 1.2 mm thick and 0.45 mm thick louvers flapincluding mosquito wire net as per spefied. 143 M& L for Rewinding of ceiling fan motor oftype 1200 mm sweep & any make,with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc.complete all as specified and directed by Engineer- in -Charge. 144 Ditto all as per above items but for Exhaust fan motor of 450 mm sweep of any make complete all as specified and as directed. 145 M&L forspray painting with white synthetic enameled paint after preparation of old surface of the ceiling fan of any make/model/sweep, including filling cavities with filler after cleaning dust complete including writting MES number all as specified and as directed.Make : Berger/Asian/ Jenson & Nocholson 146 Ditto all as per above items but for Exhaust fan of 450 mm sweep of any make and painted with grey colour. 147 Supply and fix in replacement ofnew ball bearing 6201 / 6202 / 6203including metal filling, machining if required, complete all as specified. Make : SKF/NBC 148 Supply and fix in replacement of canopy (upper and lower) to match the ceiling fan ofmake/model as per site complete all as specified. 149 Supply and fix in replacement of gun metal bush, suitable for any make and sweep ceiling fan/Exhaust fan complete all as specified and as directed by Engr-in-charge. 150 Supply and fix in replacement of fan clamp with nut & bolt and rubber bush suitable for ceiling fan of any sweep and make, complete all as specified. 151 Supply & Fix in repairXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm 3.5 core 152 Excavation in trenches in any type ofsoil n.exc 1.5m wide and n. exc 1.5m depth getting out of soil for taking out or laying of pipe line etc complete all as specified and directedfor laying of cable, errection of poles, stay andpipe line,complete all as specified and as directed. 153 Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified. 154 Removal of surplus soil to a distance n. exc 50 m above the starting point complete all as specified. 155 Supply and fixing HDPE double wall pipe corugated pipe of size 63 mm dia for cable protection laid in trenches in lieu of sand/brick protection complete all as specified and directed. 156 Supply and fixing GI pipe,40 mm dia light grade galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors for cable protection all as specified and directed.
