construction Of New Ibs And Bs In Villages And Laying Rising Main.-- 1 Providing and fixing Float operated water gauge 6” wide 15’ height painted and marked with in feet With bottom flange for fixing and pulley on top with 10” i/d copper ball with steel wire rope complete in all respect. 2 Making ‘T’ connection from newly laid pipe line/or from Boosting line/ or from T/Well rising main to existing charged lines machinery bailing out water, cutting, jointing, testing complete job. 3 1.Cutting of longitudenal joints 10mm to 12mm width and 150 mm depth of CC pavement for dismantling of CC Streets with cutter machine including all T and P and labour. 4 Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specifications 5 Providing and laying 50mm - 75 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTandH specifications 6 Providing and laying 30mm - 45 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG - 30 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of per MORTH specifications 7 Providing and fixing Electromagnetic type flowmeter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) ON incomming rising main150 mm 8 Providing and fixing Electromagnetic type flowmeter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) ON incomming rising main200 mm 9 Supply and errection of street light Lumination 2x28 watt energy saving fitting as per specification.1527 10 Providing and fixing aluminum ladder 1’ wide With 1’ center to center aluminum rod of 20 mm i/d complete in all respect. (20’ Long) (Rate without GST) 11 Supplying, erection, testing and commissioning of Dewatering Pump of 3HP 12 Provision for Capastor bank complete in all respects. 13 NS-Item:Designing, providing, fixing, commissioning and testing of GASEOUS CHLORINATION SYSTEM having capacity upto 2000 grams/ hrs. as designed having the control of gas upto 20th part of max. dose The complete system consists of (a)Vacuum regular (b)Measuring Glass Tube (c)Ejector (d) PF tubing (e)Spanner with cylinder opening kye (f)Amonia Gas(Liquid for leaking test (g)1` dia PVC pipe with PVC fitting,ball valves etc.(h)2 Nos chlorine Gas cylinder capacity 100 kg.dully certified and approved by BIS and Explosive Department Govt. of India (i)Electronic chlorine gas leak detector with sensor and hooter (j) Full face mask with canister. 14 LT. ALLUMINIUM CABLE: Supply erection testing of standard make aluminum armound LT cable for 1100 volts(3.5 core x 95 sqm) grade ISI marked Stranded compact circular aluminium conductor, conductor screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of PVC, galvanised steel flat strip armoured, and overall PVC sheathed cable conforming to is 7098 (part-2) 2011 with up to date amendments for making following connection a) from G.O switch to metering equipment.b) from metering equipment to transformer complete in all respect. Make: Indian Cables Ltd./ Polycab / RR Cables /CAPP / Finolex / Havells / Gloster / Universal / Fort Gloster Industries Ltd./ Indian Cable Co. / Asian Cables Corporation Ltd.95 Sqmm size 3.5 core 15 LT. ALLUMINIUM CABLE: Supply erection testing of standard make aluminum armound LT cable for 1100 volts(3.5 core x 150 sqm) grade ISI marked Stranded compact circular aluminium conductor, conductor screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of PVC, galvanised steel flat strip armoured, and overall PVC sheathed cable conforming to is 7098 (part-2) 2011 with up to date amendments for making following connection a) from G.O switch to metering equipment.b) from metering equipment to transformer complete in all respect. Make: Indian Cables Ltd./ Polycab / RR Cables /CAPP / Finolex / Havells / Gloster / Universal / Fort Gloster Industries Ltd./ Indian Cable Co. / Asian Cables Corporation Ltd.150 Sqmm size 3.5 core 16 LT COPPER CABLE: Supply, erection, testing and commissioning of is marked PVC Copper insulated and sheathed 3.5 core circular flexible wire 1100 volts(3.5 core x 50 sqm) along with all accessories like thimble lugs etc for motors as per entire satisfaction of Engineer-in-charge complete in all respect. Make: Indian Cables Ltd./ Finolex / Havells / Polycab / RR Cables / CAPP / Gloster / Universal / Fort Gloster Industries Ltd./ Asian Cables Corporation Ltd.50sqmm 3.5 core 17 Design and construction of automated PLC controlled 6.00 MLDScada based water treatment plant including interconnecting DI pipe from raw water pump to inlet box of WTP, CWT and Suction Well for CW , inlet channel, Alum dozing, Flash mixing, Clari floculator, filter box, over head Reservoir for back wash including pump sets and electric control panel, waste water tank including pump sets and electric control panel, DI pipes, DI specials, manhole covers, air scour equipment, chemical house including chlorination equipment and all other civil / mechanical / electric installations complete in all respects as per DNIT (Sluice valves of make IVC/VAG) 6.00 MLD CAPACITY . 18 Providing and fixing Meter, Cable and other relevant materials including approval from DHBVN and PHED as per norms for arrangement to transfer the solar power to DHBVN complete in all respect as per satisfaction of Engineer-in-Charge. 19 Providing and fixing Electromagnetic type flow meter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) ON incomming rising main 100 mm 20 Providing and fixing of Zero velocity valve for contrlling water Hammer of IVC/VAG/Kirloskar make of PN 1.6 rating, including, carriage, loading and unloading and fixing, complete in all respect to thesatisfaction of the Engineer-in-Charge . 250mm 21 Providing and fixing of Zero velocity valve for contrlling water Hammer of IVC/VAG/Kirloskar make of PN 1.6 rating, including, carriage, loading and unloading and fixing, complete in all respect to thesatisfaction of the Engineer-in-Charge . 350mm 22 Providing and fixing Electromagnetic type flow meter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) ON incomming rising main 300 mm 23 Providing and fixing Electromagnetic type flow meter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) ON incomming rising main 80 mm 24 Providing and installing Raw Water Horizontal Centrifugal pumping sets 1500 RPM with TEFC Electic motor, base plate, coupling guard, foundation bolt complete as per relevant IS code of capacity. 4000LPM 20 BHP 12.50M HEAD 25 Supplying, erection, testing and commissioning of Horizontal motor pumping set for clear water having headas per the indicated requirements of discharge in LPM and power capacity in BHPof followingcapacity :- 3750 LPM 62.50 BHP 45 M HEAD 26 Supply, erection, testing and commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of suitable size having following itemsFor 2 no Pumping Sets of 3750 LPM 45 m Head 62.5 BHPa) Main switch suitable amp. 2 No. (LandT Siemens, ABB)b) CT 100/3 = 2 Nos. (AE/ KAPPA/ LandT)c) Digital Multi function meter = 1 No.d), SPP = 1 No. of approved makee) Motor starter, Star delta for 3750 LPM x 45 m Head = 2 Nos. (LandTSiemens, ABB)f) VSS 1 No. and ASS 2 Nos. of approved make.g) Capacitor KVAR as per site requirement = 1 No.h) Indicating Lamp = One Seti) Change over switch of suitable Amp = 1 No. (Each)` 27 Laying of D.I. Pipe line By Tranchless Technology.in normal soil condition but not rock/ bolder/any undergound utilities like foundation Road, Drain coming in alingment or other underground obstructionsuitable for MS casing pipe ofsizecompletefor 500 mm i/d MS Pipe 10mm thick casing pipe. consisting with:- 1.Machinery on hire basis, Labour Heavy HydraulicCrane, Jacking Machine and other necessary equipmentHorizontalBoring/ Excavation. 2.Providing and Insertingof 500mm i/d M.S. casing pipe 10 mm thick(Fe-330 grade)Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect. 3.Providing and Insertingof 350mm i/d DI K9 Pipe and testing complete in all respect.4.Providing and Fixing of MS Spacer at a distnce of 2 Mtrs apart to avoid contract of casing pipe and carrier pipes complete - For 500mm i/d MS casing pipe ofsizecompletefor 350 mm D.I. pipe5.Excavation forreceiving pit of size 6mx 2.50 m x 4 m normal excavation for laying of casing pipe and laying of sewer pipe complete to satisfaction of Engineer-in-change. 6.Both side Plugs :-Concrete block 1:1.5:3 on both ends to plug the angular space between casing and carrier pipe complete in all respects.Trench for 350mm i/d 28 Laying of D.I. Pipe line By Tranchless Technology.in normal soil condition but not rock/ bolder/any undergound utilities like foundation Road, Drain coming in alingment or other underground obstructionsuitable for MS casing pipe ofsizecompletefor 350 mm i/d MS Pipe 8mm thick casing pipe. consisting with:- 1.Machinery on hire basis, Labour Heavy HydraulicCrane, Jacking Machine and other necessary equipmentHorizontalBoring/ Excavation. 2.Providing and Insertingof 350mm i/d M.S. casing pipe 8 mm thick(Fe-330 grade)Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect. 3.Providing and Insertingof 250mm i/d DI K9 Pipe and testing complete in all respect.4.Providing and Fixing of MS Spacer at a distnce of 2 Mtrs apart to avoid contract of casing pipe and carrier pipes complete - For 350mm i/d MS casing pipe ofsizecompletefor 250 mm D.I. pipe5.Excavation forreceiving pit of size 6mx 2.50 m x 4 m normal excavation for laying of casing pipe and laying of sewer pipe complete to satisfaction of Engineer-in-change. 6.Both side Plugs :-Concrete block 1:1.5:3 on both ends to plug the angular space between casing and carrier pipe complete in all respects.Trench for 250mm i/d 29 Laying of D.I. Pipe line By Tranchless Technology.in normal soil condition but not rock/ bolder/any undergound utilities like foundation Road, Drain coming in alingment or other underground obstructionsuitable for MS casing pipe ofsizecompletefor 350 mm i/d MS Pipe 8mm thick casing pipe. consisting with:- 1.Machinery on hire basis, Labour Heavy HydraulicCrane, Jacking Machine and other necessary equipmentHorizontalBoring/ Excavation. 2.Providing and Insertingof 350mm i/d M.S. casing pipe 8 mm thick(Fe-330 grade)Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect. 3.Providing and Insertingof 200mm i/d DI K9 Pipe and testing complete in all respect.4.Providing and Fixing of MS Spacer at a distnce of 2 Mtrs apart to avoid contract of casing pipe and carrier pipes complete - For 350mm i/d MS casing pipe ofsizecompletefor 200 mm D.I. pipe5.Excavation forreceiving pit of size 6mx 2.50 m x 4 m normal excavation for laying of casing pipe and laying of sewer pipe complete to satisfaction of Engineer-in-change. 6.Both side Plugs :-Concrete block 1:1.5:3 on both ends to plug the angular space between casing and carrier pipe complete in all respects.Trench for 200mm i/d 30 Laying of D.I. Pipe line By Tranchless Technology.in normal soil condition but not rock/ bolder/any undergound utilities like foundation Road, Drain coming in alingment or other underground obstructionsuitable for MS casing pipe ofsizecompletefor 350 mm i/d MS Pipe 8mm thick casing pipe. consisting with:- 1.Machinery on hire basis, Labour Heavy HydraulicCrane, Jacking Machine and other necessary equipmentHorizontalBoring/ Excavation. 2.Providing and Insertingof 350mm i/d M.S. casing pipe 8 mm thick(Fe-330 grade)Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect. 3.Providing and Insertingof 150mm i/d DI K9 Pipe and testing complete in all respect.4.Providing and Fixing of MS Spacer at a distnce of 2 Mtrs apart to avoid contract of casing pipe and carrier pipes complete - For 350mm i/d MS casing pipe ofsizecompletefor 150 mm D.I. pipe5.Excavation forreceiving pit of size 6mx 2.50 m x 4 m normal excavation for laying of casing pipe and laying of sewer pipe complete to satisfaction of Engineer-in-change. 6.Both side Plugs :-Concrete block 1:1.5:3 on both ends to plug the angular space between casing and carrier pipe complete in all respects.Trench for 150mm i/d 31 Laying of D.I. Pipe line By Tranchless Technology.in normal soil condition but not rock/ bolder/any undergound utilities like foundation Road, Drain coming in alingment or other underground obstructionsuitable for MS casing pipe ofsizecompletefor 350 mm i/d MS Pipe 8mm thick casing pipe. consisting with:- 1.Machinery on hire basis, Labour Heavy HydraulicCrane, Jacking Machine and other necessary equipmentHorizontalBoring/ Excavation. 2.Providing and Insertingof 350mm i/d M.S. casing pipe 8 mm thick(Fe-330 grade)Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect. 3.Providing and Insertingof 100mm i/d DI K9 Pipe and testing complete in all respect.4.Providing and Fixing of MS Spacer at a distnce of 2 Mtrs apart to avoid contract of casing pipe and carrier pipes complete - For 350mm i/d MS casing pipe ofsizecompletefor 100 mm D.I. pipe5.Excavation forreceiving pit of size 6mx 2.50 m x 4 m normal excavation for laying of casing pipe and laying of sewer pipe complete to satisfaction of Engineer-in-change. 6.Both side Plugs :-Concrete block 1:1.5:3 on both ends to plug the angular space between casing and carrier pipe complete in all respects.Trench for 100mm i/d 32 Operation and maintenance for the complete scope of work mention in the DNIT (Disinfection material supplied by the PHED) as perSchedule-IV for a period of 5 years after 12 months during defect liability period and 3 months trial run period (will be charged to the A/Mtc. Estimate) Operation and maintenance during defect liability period (Operation only) 33 Operation and Maintenance during 1st year after defect liability period year 34 Operation and Maintenance during 2nd year 35 Operation and Maintenance during 3rd year 36 Operation and Maintenance during 4th year 37 Operation and Maintenance during 5th year
