Balance Work Of Hpc Dangerpora- 1 Balance Work:Earth work in excavation in all kinds of soilby mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides andrammingofbottomsliftupto1.5m,includinggettingoutexcavatedearthand disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work. 2 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. 3 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size)including all carriages. 4 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages. 5 Centering and shuttering including strutting propping etc. and removal of form forfoundation, footings basses of columns etc .For mass concrete including all carriages. 6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages. 7 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages. 8 Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stone including all carriages. 9 Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0mm thick glass panes incld all carriages from source to site of work. 10 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement:6 coarse sand) including all carriages complete. 11 Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) heavy duty Class B type incld all carriages c omplete. 15 mm nominal Bore. 12 Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) heavy duty Class B type incld all carriages c omplete. 20 mm nominal Bore. 13 Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) heavy duty Class B type incld all carriages c omplete. 25 mm nominal Bore. 14 Providing and fixing of following PVC Pipes incld fittings like collars, door Junction,socket, bends etcof Approved Brand ( Prince/Phinolex or equivalentB-type)incld trenching and refilling all complete incld carriage from source to the site of work.100 mm dia 15 Providing and fixing of following PVC Pipes incld fittings like collars, door Junction,socket, bends etcof Approved Brand ( Prince/Phinolex or equivalentB-type)incld trenching and refilling all complete incld carriage from source to the site of work.75 mm dia 16 Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete incld carriage. 17 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete incld carriage. 18 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab upto 0.5 sqm) incld carriage. 19 Constructing masonry Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.For sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid. Chamber 60x60x75 cm incld carriage. 20 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. 21 Supply and filling ofstone soling in foundation trenches tightlyhandpacked with hand ramming, dressing ,watering incld. carriage of material from source to site of workcomplete 22 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings andfixtures complete, includingcutting and making good the walls and floors whereverrequired.W.C. pan with ISI marked black solid plastic seat and lid incld carriage. 23 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests incld carriage. 24 Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock incld carriage. 25 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings incld carriage. 26 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms incld carriage. 27 P/f of 50litrewater heater geyser of approved make like venus, jupiton, Racold or equivalent make including all necessary fittings complete including carriage. 28 Providing and fixing of1hVWater Mortor of Crompton Greeves make or Equivalent Brandand as per relevant IS Specifications incld all fittings viz inlet,outletconnections and electric fittings complete as per the directions of site Engineer. 29 Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms incld carriage. 30 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 incld carriage. 31 Providing and fixing ball valve (brass) of approved quality,High or low pressure, with plastic floats complete. 15 mm nominal bore incld carriage. 32 Providing and fixing of GI Pipe fixtures of approved Brand and Quality all complete Job.3/4 Tonkey Nipple. 33 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia incld carriage. 34 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brasssingle hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required.White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixerincld carriage. 35 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms incld carriage. 36 Providing and fixing PTMT grating of approved quality and colour. Circular type100 mm nominal dia incld carriage complete. 37 Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture incld carriage. 38 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works incld carriage. 39 Supply and stacking at site Graded Crushed stone aggregrate of size 63mm -45 mm and stone screening of size 13.2 mm nominal size (type A), stone dust/moorumincld laying ,spreading and compacting stone aggregrate of specified sizes to WBM specifiacations in uniform thickness (75 mm ) ,hand picking ,rolling with 3 wheeled road /vibratory roller 8-10tonne capacity in stages to proper grade and camber ,applying and brooming requisitetype of screening /binding material to fill up interstices of course aggregrate ,watering and campacting to the required density incld all carriages from approved source to site of work complete job(crushed from Broken Quarry). 40 Repair/Renovation of PHC Dangerpora:Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 41 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick incld carriage. 42 Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) incld scraping/sand preparingincld carrige. 43 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work incld carriage. 44 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete incld carriage. 45 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer incld carriage. 46 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) incld carriage. 47 Providing and fixing of Hradware Items T Bolts 4 incld all necessary fittings and carriage complete. 48 Providing and fixing of Hradware Items T Bolts 6 incld all necessary fittings and carriage complete. 49 Providing and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete.Flat pressed 3 layer particle board or graded wood particle board grade-I type-II, IS: 12823 marked including primer coat on unexposed surfaces.12 mm thickincld carriage. 50 Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungue, monkey beats, vegetable growth etc. including providing, applying and washing the surface with liquid ammonia chemical of 5% solution and other chemical cleaning agents as approved by Archaeological survey of India/Engineer-in-charge, ofapproved brand and manufacturer with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica and finally washing the surface with clean water with the help of pressure jet machine, windows door etc, by suitable covering so as to avoid any damage to the building/structure, all as per directions of Engineer-in-charge(the rate is inclusive of all materials and labours involved except scaffolding).
