Providing Additional Tourist Facilities And Various Upgradation Works At Mtdc Resort Tadoba Dist Chandrapur-1 Designing (aesthetically) and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5M. Centre to centre for ESR having capacity upto 500cum and not more than 6 m. c/c for ESRs having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 M. all labour and material charges including lowering, laying, erecting,, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements AS departmental desing, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers water level indicatiors, lightening conductor, G.I. pipe railing around walk per 1.00 way and top slab, providing spiral stairecase from ground level to roof level & stainless steel ladder in container, MS grill gate of 2 M. height with locking arrangement of approved design BB masonary chambers for all valves, ventilating shafts, providing and applying three coats of Acrylic emulsion with silicon additives paint to the structure including roof slab epoxy painting to internal surface & antitermite treatment for underground parts of thestructure and giving satisfactory water tightness test as per IS code the job include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-charge Note:- 1) The design of the structure shall be accordance with relevant (IS 456- 1987,IS 875-1987, IS 3370 1965or revised)2) The design shall satisfy the stipulations as per IS 1983-1984 and 13920/1993 for seismic force and 11682/1985 for RCC staging overhead tanks. 3) For design having more than columns, provision of internal bracing obligatory. External bracing is also obligatary. 4) The entire structure shall be in M-250 mix only. However concrete in contact with water such as container, base slab, wall, roof slab & footing in water born area shall be in M-300. 5) Plain round mild steel bars grade confirming to IS 432 part 1 or high yield strength deformed bars confirming to 1786 or IS 1139 shall be used, grade mild steel bars will not be allowed 6) Irrespective of the type of foundation proposed in the design one set of bracing be provided at the ground level. 7) These rates include providing M.S.ladder for ESRs upto 2 lakh liters capacity and providing spiral staircase for ESR above 2 lakh lit. capacity. 8) Staging height will have to designed with stresses of M-200 concrete. However all RCC construction should be done in m 250 except concrete in contact with water shall be designed constructed in M300. 9) These rates are including the cost uplift pressure if any and entire dewatering during execution. In case water logging area where water is struch at shallow depth extra provision dewatering shall be made as per site condition. 10) All conditions given in the Member Secretarys Circular No.MJP/TS- 1/350/1668 Dt.2.8.97 and MJP/ 1/350/2127 Dt.13.7.99 shall be strictly followed and additional cost if any, due 11) 75% part rate shall be payable for reinforcement cocrete and plastering items of containers of ESR till satisfactory hydraulic testing for water tightness in given and till that work shall be treated as incomplete. 12) The rates as indicated in the table are excluding the cost of pipes, specials, valves required for inlet, outlet, washout, overflow and bypass arrangements. The scope of the pipe assembly work shall be upto 5 M. beyond outside face of the outremost column. 13) For ESR upto 500 cum capacity CIDF pipes upto 300 mm dia shall be provided and specials should be used. For ESR above 500 cum, M.S. pipes and M.S. specials (minimum 8mm thick uo to 500mm dia. & 10 mm thickness above 500 mm dia.) shall be used with proper anticorrosive epoxy treatment from inside and outside 14) Below mentioned rates are for foundations with individual footing with bearing capacity of 20 tonnes per sqm. For raft foundations, these rates shall be increased by 7.5% where safe bearing capacity (SBC) is 5 MT per sqm and by 5% where SBC is more than 5 MT /sqm and upto 10 MT/sqm. This % of 5% or 7.5% is applicable for estimation of amount of LS item of ESR. For Extra Item due to change from individual foundation to raft actual increase in concrete and steel be paid as per relevent DSR Item. 15) The rates shall be increased by 30% for bearing piles upto depth of 10 m and for further increaseed in depth by 5 m each it shall be increased by another 10 5.These rates are applicable where raft is not feasible for pile foundation sufate resistant cement shall only be used. Single pile for the column is not permitted Group of piles shall be 16) These rates are applicable for staging height of 12 m.These rates shall be increased or decreased for per meter variation in the staging height as below. 12 to 16 M staging 2 % per m 16 to 20 M staging 3 % per m 20 Mtr & Above 4 % per M 2 Providing and supplying ISI standard welded DI double flanged pipe excluding GST levied by GOI & GOM in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer - 55.00 3 Providing and laying jointless Polydee- LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP- 42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/ One Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/ One Square Metre and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/ One Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. 4 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete 5 Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complet 6 Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete 7 Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1: C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. 8 Providing and laying cement concrete flooring 40mm thick with M20 cement concrete laid proper level and slope in alternate bays, including compaction, filling joints, marking lines to give appearance of tiles of 30cm 30cm or other size laid diagonally/square etc. finishing smooth (with extra cement) in any colour as directed and Curing etc. complete. With Crushed sand VSI Grade 9 Providing water proof bedding for floori ng of Bath and WC 25 mm thick in C.M. 1:3 including using a pproved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. 10 Providing and fixing C P brass Wall Hang WC Pan with Seat Cover JAQUAR BATH FITTINGS etc (ARS 0110) 11 Providing and fixing C P brass Rose Table Top Basin JAQUAR BATH FITTINGS & SANITARYWARE (ARS-WHT 0538) 12 Providing and fixing C P brass Wall Mixer with provision for overhead shower with 115 mm long upper bend pipe and wall flage. JAQUAR BATH FITTINGS & SANITARYWARE (Item Code FLR - 5273 UPR) 13 Providing and fixing C P brass Overhead Rose Shower with Shower Arm JAQUAR BATH FITTINGS & SANITARYWARE (Item Code 1989 + 477 CP) 14 Providing and fixing C P brass Central Hole Basin Mixer JAQUAR BATH FITTINGS & SANITARYWARE (Item Code 5005 B / 5001 B) 15 Providing and fixing C P brass Waste Coupling 32 mm (Full Thread) JAQUAR BATH FITTINGS & SANITARYWARE (Item Code 750 L130 CP) 16 Providing and fixing C P brass Angle Stop Cock with Flange JAQUAR BATH FITTINGS & SANITARYWARE (Item Code 5053 CP) 17 Providing and fixing C P brass Bottle Trap JAQUAR BATH FITTINGS & SANITARYWARE (Item Code 773 B CP) 18 Providing and fixing C P brass Metropole Flush Valve JAQUAR BATH FITTINGS & SANITARYWARE (Item Code 1093 CP) 19 Providing and fixing C P brass Two Way Bib Cock JAQUAR BATH FITTINGS & SANITARYWARE (Item Code 5041 CP) 20 Providing and fixing Bib Cock JAQUAR BATH FITTINGS & SANITARYWARE (Item Code CON- 037 CP) 21 Providing and fixing C P brassTowel Ring Square JAQUAR BATH FITTINGS & SANITARYWARE (Item Code 1121 N CP) 22 Providing and fixing C P brass Double Hook JAQUAR BATH FITTINGS & SANITARYWARE (Item Code 1161 N CP) 23 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 24 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 25 Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 26 Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. 27 Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete. 28 Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. Bd.V.32 Page No.567 29 Providing and laying for 150 mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. 30 Providing and Fixing Jet spary .etc complete. 31 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. 32 Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622- 2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complet 33 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622- 2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 34 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622- 2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. 35 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 36 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete 37 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. 38 Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25- 30 mm deep ribs with subtle square fluting in the five pan at nominal 180- 250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 39 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means 40 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Manual Means 41 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means 42 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 43 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 44 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 45 Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per sqm. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solids clear sealer @ 150 to 250 gms per sqm using surface roller and protecting from falling dust,dirt and curring by curring compound / by providing cement vata in cement Mortor 1 :8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary ) 46 Dining Table -(1200 x1200x800 with four chair) Providing & Supplying Dining table shall be made out of 18mm thick plywood top with moulded and curved T.W.leg and approved colour of granite top with corner moulding .Chair shall be made out of 19 mm thick marine plywood for arm on either sides for base and vertical including.The chair shall have 450mm height with 100mm thick foam for seat,75mm thick foam for back along with approved colour cloth as a finishing Material.All exposed surfaces shall be finished with 3 coats of Melamine polish etc.complete.as per detailed drawing and instruction of Architect/Engineer. 47 Kitchen Trolley Providing and Fixing stainless steel kitchen trolley of overall 26 height and 22 depth,supported on aluminium pipes ,trolley basket made out of 5 mm stainless steel rod fitted on telescopic channel of size 1.5 x 20 x 22 on both sides of trolley of 12 or above size, panel having 40Kilogramload bearing capacity of trolley made out of 20 mm PUC coated plywood and colour combination as directed by E-I-C.Inner side of panel covered by white mica ,100 mm s.s. decorative handle.(The width and height of individual compartments shall be kept as directed by Engineer-in-charge) 48 Providing and fixing of factory made uPVC Sliding window & door (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+- 0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 P Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In- Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). 50 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary 51 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed,all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 52 Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. 53 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish Bd.M.35 B/Page No.393 54 Providing and fixing 1.5 mm thick chlorine-resistant reinforced Plasticized Poly Vinyl Chloride homogenous membrane for pool including underlay Geotextile of 300 GSM, adhesive of pidilite or equivalent make, SS screws, washers, roller, sealing of Bostik or equivalent make. The specifications of membrane shall be as per EN 15836-1: 2010 & shall have manufacturers guarantee of minimum 10 years for watertightness & minimum 05 years for color & anti stains properties. The item shall inclusive of cleaning of existing tiles thoroughly with pressure washing, soap, etc. complete as directed by engineer in charge. 55 Sofa Set 3+1+1 Providing&fixingSofaSet3+1+1Browna ndCreamleatherDIMENSIONLength:18 2.5(cms)Breadth(cms):100(cms)Height( cms):100(cms)Weight(Kilograms):66(K ilogram) Seating Capacity: Five Seat 57 PROVIDING AND FIXING SYNTHETIC THATCHED ROOF(OF MAKE WINROYAL OR VIRAL CARPORATION PVT. LTD. OR EQUIVALENT ) IN SLOPING SURFACE ON WATER PROOFING MEMBRANE TO BE FIXED ON 12 MM THICK SHERA FLEXY BOARD USING ADHESIVES, SCREWED AND FIXED ON THE FABRICATED SURFACE AS PER THE DETAILED DESIGN AND DRAWINGS. THATCHED ROOF WILL BE FIXED IN LAYERS USING THE SPECIFIED GLUES. WHEREVER REQUIRED THATCHED RIDGES ARE TO BE PROVIDED AS PER THE DRAWINGS.INCLUDING ALL NECESSARY CUTTING, FIXING, SCAFOLDING, ETC COMPLETE AS DIRECTED BY CONSULTANT. (INCLUDING COVERING GURANTEE OF 10 YEARS ON COURT STAMP PAPER OF RS. 500/- ) 58 PROVIDING AND FIXING RIDGE OF SYNTHETIC THATCHED ROOF (OF MAKE WINROYAL OR VIRAL CARPORATION PVT. LTD. OR EQUIVALENT )IN SLOPING SURFACE ON WATER PROOFING MEMBRANE TO BE FIXED ON 12 MM THICK SHERA FLEXY BOARD USING ADHESIVES, SCREWED AND FIXED ON THE FABRICATED SURFACE AS PER THE DETAILED DESIGN AND DRAWINGS. THATCHED ROOF WILL BE FIXED IN LAYERS USING THE SPECIFIED GLUES. WHEREVER REQUIRED THATCHED RIDGES ARE TO BE PROVIDED AS PER THE DRAWINGS.INCLUDING ALL NECESSARY CUTTING, FIXING, SCAFOLDING, ETC COMPLETE AS DIRECTED BY CONSULTANT. (INCLUDING COVERING GURANTEE OF 10 YEARS ON COURT STAMP PAPER OF RS. 500/- ) 59 PROVIDING AND FIXING STARTER OF SYNTHETIC THATCHED ROOF (OF MAKE WINROYAL OR VIRAL CARPORATION PVT. LTD. OR EQUIVALENT AS PER APPROVED BY CONSULTANT )IN SLOPING SURFACE ON WATER PROOFING MEMBRANE TO BE FIXED ON 12 MM THICK SHERA FLEXY BOARD USING ADHESIVES, SCREWED AND FIXED ON THE FABRICATED SURFACE AS PER THE DETAILED DESIGN AND DRAWINGS. THATCHED ROOF WILL BE FIXED IN LAYERS USING THE SPECIFIED GLUES. WHEREVER REQUIRED THATCHED RIDGES ARE TO BE PROVIDED AS PER THE DRAWINGS.INCLUDING ALL NECESSARY CUTTING, FIXING, SCAFOLDING, ETC COMPLETE AS DIRECTED BY CONSULTANT. (INCLUDING COVERING GURANTEE OF 10 YEARS ON COURT STAMP PAPER OF RS. 500/- ) 60 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. 61 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement curing the same for not less than 2 and keeping the surface of the coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface taking out grains and curing fourteen days scaffolding etc.complete. 62 LG 14 Place Setting Free Standing Dish Washer with TrueSteam, QuadWash, EasyRack Plus, Wi-Fi Enabled (DFB424FM, Matte Black, Inverter Direct Drive Motor) As directedby Engineer in Charge 63 Providing wax polishing to floors and dado, preparing the surface, scaffolding etc. complete. 64 Providing and constructing Columns ,footing & steel including Design supply fabrication & erection Tensile structure Roof with Fabric of 900 Gsm both side Coated with PVDF Lacquer System on both sides,titanium dioxide front side primer,low-wick,protected aginst microbial and fungal attack,UVprotected top caot of type 2 grade of required colour and shap and design including necessary M.S.tensile steel structure of hollow section,gusset plates bolts nuts,screws etc. complete with one coat of epoxy primer and two caot epoxy paint etc.all complete as specified and approved by architect the complete structrual structure Designed to withstand the wind pressure as per IS (PART III), to accmmodate thermal expansion and seismic movement etc The rate shall include all design calculations, engineering and slope drawing Including approval from cometent structural designer,Labour T &P scaffolding other incidental cahrges including wastage enabling temporary service all fitting fixtures complete as per technical specfication .for the purpose of Payment actual surafce area of fabric shall measured etc. 65 Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chairmade of complete metal with Legsin Crome finish and seates in silver powder coating finish. 66 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.80m x 1.20m size made up of 4 mm aluminum composite pannel sheet with 0.5 mm skin thickness on either side bonded with white retro reflective sheeting of Class C (Type XI Micro prismatic grade sheeting) having pressure sensitive adhesive. Retro reflective sheeting with specified background, border and back side reto reflective symbols, letters, numerals, arrow as per IRC: 67-2012 Table No 8.3, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Class _C_ (Type XI Micro prismatic grade sheeting)) shall have 10 years written warranty from the manufacturer including the Digitally Printed areas with approved printing technology with sheeting manufacturer approved inks and laminated with UV overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 67 NATURAL BAMBOO CEILING: Providing & fixing of Wooden Grill panel with backer made of natural bamboo with 24mm Face black exposed grid. The Grill panels shall be made of rapidly renewable natural bamboo core having density 600+Kgs/m3 as per BS EN323 (1993) and bending strength of 96+ N/mm2 as per BS EN310 (1993). The Grill panel shall have a seven layer UV coating of thickness 0.09-0.11mm as per BS EN71 finished to natural or carbonized shades. The Grill panel shall be of nominal size 35x300x2400mm comprising 8 blades/slats of 35x16x2376mm with centre to centre spacing of 37.5mm fixed through Backer of size 12x22x300mm having centre to centre spacing of 300mm and additional end backers at 150mm from both the edges. The Grill panel shall have a fire performance of Class A according to ASTM-E84. The Grill panel shall have moisture content of 8- 14% as per IS 1708 (Part 1):1986 and a Humidity Resistance (RH) of 70%. SUSPENSION: The tile shall be installed on 24 mm wide T - section flanges having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm, 35mm and 30mm respectively. The deflection loading of the system shall be 17.8 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 21.4kg/m. The end details of the main beam and cross tee shall be made of pre hardened steel fixed to the ends. The cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All exposed panel ends to be covered using edge caps. All wall angles to be covered using ledgers. Installation should be carried out as per Manufacturer recommended procedure. The grid shall be installed with suspension system of recommended make. 68 Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) 69 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etc. complete, With fine aggregate (Crushed sand VSI Grade) 70 Royalty Charges 71 Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. 72 Flexural test ( Set of 6 Tiles), Water Absorption ( Set of 6 Tiles).Resistance to wear ( Set of 6 Tiles). 73 Flooring of Natural Stone (Kota,Marble, Granite,Tandur.etc.) Water absorption, Specific gravity 74 Compressive Strength OF C.C. Cube (Set of 3 cubes). 75 Retro Reflective Test.
