Providing Additional Tourism Facility At Mtdc Resort Navegaon Bandh Dist Gondia=1 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) First Floor Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) First Floor Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and fixing in position TMT - FE 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. First Floor Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete First Floor Providing internal cement plaster 12mm thick in single coat in cement mortar 1: without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete First Floor Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete(Low VOC). First Floor Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective Paint). First Floor Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. First Floor Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1: cement mortar including neat cement float, filling joints, curing and clearing etc. complete. First Floor Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 4 cement mortar including neat cement float, filling joints, curing and clearing etc.complete First Floor Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. First Floor Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. First Floor Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. First Floor Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Providing and fixing of factory made uPVC Sliding window & door (White Colour) 3 Track with Mesh-2 Glass Sash + 1 Mesh Sash complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 P Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for period of ten (10) years against nonuniform discoloration, wrapping and rotting under general use. 3 Track with Mesh-2 Glass Sash + 1 Mesh Sash (Each sash shall be half of width of window) (Big Series) Window frame of size 122 x 54 mm & Sash of size x 47 mm. First Floor Providing and fixing of factory made uPVC Louver window (White Colour) comprising of uPVC multi-chambered with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with 1.5 mm thick G. I. Section. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specifie Parameter1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m24 Flexural Modulus Elasticity EN ISO – 178 Shall not be 2200 N/mm2 5 Mean Breaking Stress for welded corner(a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985- 2000 Shall not be > 2.0 %7 Surface Spread of flame BS : 476 - Part 7 Classification 18 Ignitability Evaluation BS : 476 - Part 5 P Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa10 Shear Modulus ASTM D 732 Shall not be < 220 MPa11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame shall be fusion welded. Both vertical sides of the frame, adjustable louver mechanism having one lever or fixed louver bracket shall be fitted with the of 4 mm Frosted Annealed glass. Window will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge.uPVC Window and Door Profiles are warranted for a period of ten (10) years against non- uniform discoloration,wrapping and rotting under general use.a.Louver Window (Big Series) frame of size 67 x 62 mm & Mullion (if required) of size67 x 78 mm. First Floor Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete First Floor Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete First Floor Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. First Floor Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete. First Floor Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. First Floor Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. First Floor Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) First Floor Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. First Floor Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm WithR.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100Kilogrametc. complete. First Floor Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete First Floor Providing and fixing European type wallhung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. First Floor Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. First Floor Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. First Floor Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. First Floor Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. First Floor Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. First Floor Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete. First Floor Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete. First Floor Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete First Floor Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. First Floor Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) First Floor Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. First Floor Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. First Floor Providing & fixing tera felt APP ( Atactic Poly-prolene) Gobain make underlay membrane of approximate 2mm thick below single fixed by sufficient rust free nails on existing concrete plain/ slopping roof including all materials, transportation, labour and scaffolding etc. complete as per instructions of engineer incharge/ Architect etc. complete. First Floor Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. First Floor Providing & fixing tera felt APP ( Atactic Poly-prolene) Gobain make underlay membrane of approximate 2mm thick below single fixed by sufficient rust free nails on existing concrete plain/ slopping roof including all materials, transportation, labour and scaffolding etc. complete as per instructions of engineer incharge/ Architect etc. complete. First Floor Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per One Square Metre of surface area covering ten years guarantee on bond paper. Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushedsand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings finishing with french-polish/ waxing complete. (without door frame).(Sample to got approved from Ex.Engineer before use) Commercial Hard Wood shutter Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded PVC channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineerincharge,manufacturersspecification and drawing. Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete Prior approval of sample and brand by Ex.Engineer is necessary before use) Dry wall cladding with clay tile; Designing, supplying and fixing of Clay tile of Wienerberger (Red Series or Grey Series) or Equivalent with suitable size and thickness not less than 20 mm as per manufacturer with approved colour and pattern with composition of finest powdered clay and colour mixtures. The clay tile shall be fixed on the suitable farming system by using continuous aluminium profiled section as per manufacturer with suitable size and spacing to withstand the structural design criteria specifled in the technical specification by using necessary HDG brackets, SS316 grade anchor bolts etc as per manufacturer specification. Cladding joints should be with open groove system. with prior approval of concerned Superitending Engineer. Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge) Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. Providing and fixing Puff Sheets of 30 mm thick; colour as per direction and composed of Two side Polyurethane Galvanized Iron sheets of 0.50 mm thick corrugated roofing sheet and Puff Material sandwiched between tow metal sheets profiled sheets for roofing. Of Density of 40 Kg/m^2. Including all types accessories required for proper installation such as External ridge, Internal Ridge, Roof End Cap, Gutters etc. complete Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. Providing and laying in trenches 50 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes ?of 5.17 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Providing and laying in trenches 100 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes ?of 12.43 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti- corrosive oil paint , 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By /manaual Means ) a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add 20% d) 4.50m to 6.0m lift, Add 30% Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural artifical sand) Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from departmental Land) Providing dry rubble stone pitching 23 cm about 9 ) thick including all material, quarry spalls, labour etc. complete. Providing vee pointing with cement mortar 1:3 for stone / Brick masonry including scaffolding and curing etc. complete CARPET : Supplying & fixing CONDOR - SAFIER or I.T.C.- QUARTZ or equivalent make synthetic loop pile carpet of approved shade and design with 10mm thk PVC foam underlay laid as per site requirement with side edge stitching clips etc. complete as per instructions of the Architect / Engineer. 5 X Providing & fixing good quality Main curtain of fabric ranging at the Rmt with proper lining inside and stitching as per American plate including providing Curtain Rod hooks elastics etc. complete in all respect as directed by EIC. First Floor Providing ,Supplying and fixing the wall paper on walls or on ply etc of suitable size shall match the size of wall or as per the approved drawings ( joints of paper should be avoided ).The quality of wall paper should be non oven backing with mat & glossy finish.The Paper should be of German technology make and should be quality product.The wall paper and pesting material (glue) should be got approved before fixing by engineer incharge/Architect. For fixing the wall paper necessary base of wall or ply etc should be prepared ,then fix the wall paper in such a way that there should not be any air bubble or undulations seen on the surface of paper as per approved design and drawings and as directed by Engineer incharge/Architect etc complete. First Floor Providing and placing ( 90 cm x 60 cm)posters/portrait/painting of local and other artist to match the interior and surrouding locality including fixing and placing in position etc complete.Colour and designe approved by Engineering in charge etc complete.Specification as Directed by Engineer-in-charge etc,complete. PP ( 90 cm x 60 cm)posters/portrait/painting First Floor Providing and placing ( 45 cm x 30cm)posters/portrait/painting of local and other artist to match the interior and surrouding locality including fixing and placing in position etc complete.Colour and designe approved by Engineering in charge etc complete.Specification as Directed by Engineer-in-charge etc,complete. PP ( 90 cm x 60 cm)posters/portrait/painting First Floor Providing and fixing Mirror with frame, 5mm float glass of Saint Gobain with all necessary beeding , fixtures accessaries and fill up the gaps between glass and frame with sealent and as per drawing approved by Architect and as directed by Engineer in-charge. First Floor Designing , Itching and Buffing on glass as per drawing approved by Architect and as directed by Engineer incharge. First Floor Providing & Fixing in position, 12mm wp Ply wood & 1.5mm laminate panels above the fabricated frame on one side , as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete First Floor Providing and fixing Shandelier JES-CHRCHL0006RPE14 6LT Smoky Glass with Crystal ,Lamp:-E-14 LED 4W x 6 of Size:- Depth 700 mm , Height 1300 mmwith necessary scaffolding as per design approved by Architect SOFA : Provide sofa made of 600mm X 1500mm C.P.T.Wood frame work along with 6mm thk marine Ply for arms on either side.The sofa shall have 225mm height vertical type spring shall be fixed with thick nylon thread for the seat along with 100mm thk MM foam for seat, 75mm thk MM foam for back, 50mm thk MM foam for back, 50mm thk MM foam for handles with covering mix pieces of foam should be spread over the individual seat to have comfort along with approved make upholstery shall be used in wrinkle type design as a finishing material etc. complete as per detail drawing and instructions of the Architect / Engineer. (Basic Cost of Upholstery Rs.400/- Per Meter) CENTER TABLE (900mm X 450mm X 375mm) Providing center table in oval shape made out of 25mm dia Brush finish Stainless Steel frame work with 38mm X 38mm P.T.Wood frame work with Stainless Steel Stud with fixing of glass top & shelf.All exposed surfaces shall be finish with 3 coats MELAMINE polish including 12mm thk PLAIN glass for TOP & 10mm thk FROSTED glass fixed with Brush Finish Stainless Steel Studs etc. complete as per detail drawing and instructions of Architect Engineer. First Floor LOW HEIGHT CUPBOARD : Providing & Erecting low height storage 450mm to 600 mm in depth. The sides and shutters including shelves shall be made out of 50mm X 25mm P.T.Wood frame covered 6mm thick marine ply. The back shall have 12mm thick marine ply.The shutter shall be finish with approved color 1.5mm thick laminate.(Vertical Storage Laminate Finish), but the top, sides, shutters, shelves shall be made out of 19mm thk marine with necessary 50mm X 50mm P.T.Wood frame work with laminate veneer finish etc. complete.All exposed surfaces shall have approved color/ malamine finish, 1.5mm thk laminate and matching color ZINC OXIDE polish for internal surfaces etc. complete as per instructions of Architect/Engineer.(Note :- The furniture may be tailor made or customised as per the space available and should be executed as per instructions of Engineer In Charge) WARDROBE : Providing and fixing in position 600mm deep Wardrobe units 1.7x2.1x0.6) along the partitions/wall as indicated in drawings. Storage unit shall be made out of 19mm thick plywood for sides, and bottom. Shutters shall be made out of 19mm thick plywood finished with Laminate per profile externally and 0.8mm thick Laminate from inside. All shutter to be provided with cup hinges of approved make as drawing. Inside top & bottom ledges, sides and intermediate dividers shelves and internal exposed sides shall be finished with 0.8 mm thick Laminate & 1mm thick Laminate for all external top and sides. Rate quoted for the item shall include for cost of 19 mm thick plywood shelves including wooden beading, hardwares such as ball catches, locks, handles etc. Item to be completed in all respects as per drawings, specifications & instructions from Consultant. First Floor TV Unit - Providing and constructing TV unit size 2.4 m x 0.30m made in 18mm thick plywood with both side laminate finish table top, table edge, support, wire management, storages and all other accessories etc as per detailed drawings given by architects etc. complete. First Floor Providing and fixing in possition luggage rack size 1.70 x 0.6 x0.75 as per the approved drawings made in waterproof,antetermite treatment plywood of thickness 18mm with both side laminate finish as per the approved colour and design by Architect/Engineer incharge including fixing necessary accessaries polishing etc.complete. First Floor STUDY TABLE: Providing and constructing study table of size as directed with chair, table top, table edge, support, wire management, storages and all other accessories etc as per detailed drawings given by architects etc. complete. Laminate / veeneer finish painting/ malamine finish etc complete. (Note :- The furniture may be tailor made or customised as per the space available and should be executed as per the instructions of Engineer In Charge) ATTENDENT TABLE WITH SIDE TABLE Table Size: - 1650mm X 600mm X 750mm Side Table Size: - 900mm X 375mm X 750mm Providing & Fixing reception table with side table made out of 19mm thk marine frame work for top, sides, front apron, drawer box, shelves, key board along with 12mm thk marine ply for drawer side, step design for apron & 6mm thick marine ply for drawer bottom, back sides & curve shape etc. complete.The reception table & side table shall have approved color 18mm thk GRANITE slab for top with necessary edge MOULDING including 12mm thk PLAIN glass with ACID effect etc. complete. (Basic Cost Of Granite Rs.1830/- Per SMT)All exposed surfaces shall have approved color 1.5mm thk laminate along with METALLIC sheet for round shape & 2mm thk M.S. perforated powder coated sheet for apron fixed with Patch Fitting and inside shall have laminate matching color ZINC OXIDE polish including approved make Hardware such as Twin Telescopic Sliding Channels, Wire Manager, Approved Handles, Box Type Hinges,12mm thk marine ply wood 600mm X 450mm X 225mm height slope type Foot Rest finish with Rubber Mat finish, Powder coated CPU Trolley etc. complete as per detail drawing & instructions of the Architect / Engineer. First Floor Office table (1200X750x750mm) Top work surface shall be 12mm thick toughen glass with back painted design on to underside and crystal edge polished finished. The construction shall be knock down .Construction- The understructure shall have all pannels made from 36mm thick prelaminated board (Antitermide and Waterproof )with 2mm thick PVC edge beading ,understructure also consist of storage for CPU ,projector and paper .Storage- Provision for glass adjustment for glass alligning .The wire management shall have legend electricals use for wire on to center support beam panel and CPU storage area for socket connections , RJ11,RJ45 etc. colour and design approved by Engineering incharge complete. First Floor Providing and placing in position Side Table at inside cottage made with pitch wood polished with melamine polish of approved shade with 10mm thk. clear glass top of size 600 X 600 X 330 )as per Architects drawing and Make approved as Directed by Engineerin- charge etc,complete. First Floor Providing and fixing Consilled Door closer of Godrej make in possition including all necessry acessaries as per design approved by Architecr/ engineer in-charge etc. complete. First Floor STAINLESS STELL DUSTBINS (BRUSH STEEL) Providing & supplying stainless steel dust bins of 225mm diameter x 22 guge perforated sheet with plain border of 50mm on top & bottom. The bottom surafce shall be flat with round borders. The height of dustbins is 450mm. First Floor Providing and supplying Bathroom & Toilet Assessories like 17 liter Buckets, 2 liter Mug,dust bin , bathroom broom, etc. in bathrooms as per Architects drawing and approved Make as Directed by Engineer-incharge etc,complete. First Floor Providing and supplying good quality cotton Turkish type (Face Towel) napkins. Of size 405 mm x405 mm of approved colour and quality as directed by engineer in charge et. Complete.Specification as Directed by Engineer-in-charge etc,complete. PS good quality cotton Turkish type (Face Towel) napkins First Floor Providing and fixing in position electronic security chest/Locker having finger impression or digital number locking arrangement of medium size capacity .including all necessary equipment, connections and arrangement etc complete of make Godrej or equivalent as per instruction of engineer in -charge.Specification as Directed by Engineer-in-charge etc,complete. DRESSING TABLE WITH SEATTY TABLE: Providing and fixing Dressing table of size Depth - 450.0 mm Width - 450.0 mm Height - 1710.0 mm as directed with seatty including table top, table edge, support, storages and all other accessories etc as per detailed drawings given by architects etc. complete. Laminate / veeneer finish painting/ malamine finish etc complete. (Note :- The furniture may be tailor made or customised as per the space available and should be executed as per the instructions of Engineer In Charge) First Floor Dining Table With Chairs - 1.200 m x 1.200 m dining table with four nos. Of sofa chairs Leather Finish Do as above item ( Sofa - leathre finish), but sofa chairs shall have 500mm wide with both side handles etc.complete as per instruction of the Architect/Engineer. Providing and fixing in position First-aid box with first aid chart printed on the box with all first aid medicines such as sterilised dressings, antiseptic solutions, oinment for burn, crocin, first aid bookletas per Architects drawing and approved Make as Directed by Engineer-incharge etc,complete. Supplying and installing Office Signages of Size 4 x 6 Glass/SS with Vinyl as per Rooms cabin (Fire escape and Route prolite signages)as per Architects drawing and approved as Directed by Engineer-in-charge etc,complete. Providing and installing quartz type wall clocks as per color combination of interior with duracell battries of make Ajanta/ equivalent make base price not less than 1000.00 .including necessary hanging arrangement on wall etc. completeas per instruction of Engineer- in Charge.Specification as Directed by Engineer-in-charge etc,complete. First Floor Reception chair - High back chair in fabric. Double ply back with 3D bend and high density foam on back with mould seat Fabric upholstery on seat and back Back tilt mechanism Gas lift height adjustment Fixed PP arms Five prong fiber base with nylon castors for all floorings. Visitor Chair - Medium back chair in fabric. Double ply back with 3D bend and high density foam on back with mould seat Fabric upholstery on seat and back Back tilt maechanism Gas lift height adjustment Fixed PP arms Five prong fiber base with nylon castors for all floorings. Providing & Fixing of FREE STANDING King size Bed made in ply and mica of choice size is 2000 x 1800 x 400 Mm. Height Including 100 MM. Thick Matters, with Bed Back with Cusion and with bed sheets Design given by Engineer Incharge, With including side table size is - 450 x 400 D x 500 high. both side, As per furniture Layoutas per design and drawing and instructions of Engineer in charge.. Providing & Fixing of FREE STANDING Single bed made up of 18 mm ply and mica of choice Bed size is 2000 x 900 x 400 Mt. Height Including 100 MM. Thick Matters, with Bed Back with Cusion Design given by Engineer Incharge, With including side table size is - 450 x 400 D x 500 high. Single Side only , As per furniture Layout.as per design and drawing and instructions of Engineer in charge. First Floor Providing & Fixing of FREE STANDING Bed side tables made in 18 ply and mica of choice size is 450 x 450 x 400 Mm. Height with one drawer. As per furniture Layout.as per design and drawing and instructions of Engineer in charge. First Floor Providing and fixing Banquet hall Chair with Isosceles without handle- Size H:860mm, D- 580mm, W-540mm. Back and sit moulded cushion, back outer PPCP, Crape Tapestry, frame oval tube -13 x 13 mm -16g with power coated the over all dimension +/- 10mm Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. Transporation of all types of material upto 2 km Supplying hard murum/ kankar at the road site, including conveying and stacking complete. Spreading hard murum/ soft murrum/ gravel or kankar for side width complete Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading I (Using Screening Type B (11.2 mm) Aggregate) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate) Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushedsand VSI Grade) Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Over/Upto cm wide) (MORTH-803) - - SurfaceOver 10cm Wide On New Surface Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface be level, uniform, and free from streaks and holes complete as per direction of Engineerin- charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per sqm. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solids clear sealer @ 150 to 250 gms per sqm using surface roller and protecting from falling dust,dirt and curring by curring compound / by providing cement vata in cement Mortor 1:8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary ) Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand) Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 20 cms.( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.38a) Supplying on site well decomposed Farm Yard Manure for excavation area of depth of 20 cms. ( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.38b) Providing on site well established (free from weeds /diesease etc.) ready to fix lawn turf in slabs/ rolls of required variety as directed .(As per P&G DSR 2022-23 Items of garden work,Sr No.14, item no 2) Providing on site required variety of Shrubs (free from weeds /diesease etc.) 30 cms. apart c/c.Name:-Murraya(Kamini);Bag Size 7 x 8(plants list) 1(a) serial no 15. Providing on site required variety of Hedges Well Developed, Healthy Foliage / Half Bloom Stage , Free from Pest and Diseases. apart c/c.Name:-Bougavillae Thema ;Bag Size 8 x 10 (plants list) 7(b) serial no 10. Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 20 cms.(As per P&G DSR 2022- 23 Items of garden work,Sr No.5) Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 20 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover. (1/10 of semiskilled labour)(As per P&G DSR 2022-23 Items of garden work,Sr No.23) Maintainance of Newly Developed lawn(Instant Lawn) Area. For First 30 days Only (As per P&G DSR 2022-23 Items of garden work,Sr No.29) Maintainance of Newly Developed Shrubs Area. For First 30 days Only (As per P&G DSR 2022-23 Items of garden work,Sr No.31) Supplying on site fresh Garden soil (i. e. 3 part soil ) (free from stones rubbish like dried grass roots, other such materials) for excavated pit size area of 1 x 1 x 1m ( consolidated thickness).Quantity of soil 0.653 cum x 800/cum = 522.40/-.(As per P&G DSR 2022- 23 Items of garden work,Sr No.45a) Supplying on site well decomposed Farm Yard Manure FYM (i. e. 1 part FYM) for excavated pit size area of 1 x 1 x 1m. ( consolidated thickness).Quantity of FYM 0.203 cum x 950/cum = 19.85/-.(As per P&G DSR 2022-23 Items of garden work,Sr No.45b) Providing on site Flowering Trees Specification:- Minimum Girth 8 to 10 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves ,clear trunk, well Developed Canopy,Healthy conditionFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. Apart c/c.Name:-Bahva (Amaltash);Bag Size 18 x18, ht 8- 10(plants list sr no1,item no 5C) Providing on site Flowering Trees Specification:- Minimum Girth 8 to 10 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves ,clear trunk, well Developed Canopy,Healthy conditionFree from pest anddiseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. Apart c/c.Name:- Bakul;Bag Size 18 x18, ht 8- 10(plants list sr no2,item no 5C) Providing on site Flowering Trees Specification:- Minimum Girth 8 to 10 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves ,clear trunk, well Developed Canopy,Healthy conditionFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. Apart c/c.Name:-Bottle brush;Bag Size 18 x18, ht 8- 10(plants list sr no3,item no 5C) Providing on site Flowering Trees Specification:- Minimum Girth 8 to 10 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves ,clear trunk, well Developed Canopy,Healthy conditionFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. Apart c/c.Name:-Gulmohar;Bag Size 18 x18, ht 8- 10(plants list sr no4,item 5C) Providing on site Flowering Trees Specification:- Minimum Girth 8 to 10 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves ,clear trunk, well Developed Canopy,Healthy conditionFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. Apart c/c.Name:-Kadamb;Bag Size 18 x18, ht 8- 10(plants list sr no5,item 5C) Providing on site Flowering Trees Specification:- Minimum Girth 8 to 10 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves ,clear trunk, well Developed Canopy,Healthy conditionFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. Apart c/c.Name:-Kanchan;Bag Size 18 x18, ht 8- 10(plants list sr no6,item 5C) Providing on site Flowering Trees Specification:- Minimum Girth 8 to 10 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves ,clear trunk, well Developed Canopy,Healthy conditionFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. Apart c/c.Name:-Largesstroemea ;Bag Size 18 x18, ht 8- 10(plants list sr no7,item no 5C) Providing on site Foliage Trees Specification:- Minimum Girth 8 to 10 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves ,clear trunk, well Developed Canopy,Healthy conditionFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged.. Apart c/c.Name:-Arjuna ;Bag Size 18 x18, ht 8- 10(plants list sr no3,item no 6C) Providing on site Foliage Trees Specification:- Minimum Girth 8 to 10 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves ,clear trunk, well Developed Canopy,Healthy conditionFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged.. Apart c/c.Name:-Deshi Badam ;Bag Size 18 x18, ht 8- 10(plants list sr no4,item no 6C) Providing on site Foliage Trees Specification:- Minimum Girth 8 to 10 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves ,clear trunk, well Developed Canopy,Healthy conditionFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged.. Apart c/c.Name:-Drooping Ashok ;Bag Size 18 x18, ht 8- 10(plants list sr no5,item no 6C) Providing on site Palms Specification:- Palm should be well Developed,Good Branching ,healthy Condition,appropriate Size in Polybag,undamaged. .. Apart c/c.Name:-Areca Palm ;Bag Size 18 x18, ht 8- 10(plants list sr no1,item no 11d) Providing on site Palms Specification:- Palm should be well Developed,Good Branching ,healthy Condition,appropriate Size in Polybag,undamaged. .. Apart c/c.Name:-Fox tail palm;Bag Size 18 x18, ht 8- 10(plants list sr no3,item no 11d) Excavation pit size 1.00 x1.00 x 1.00m for planting large flowering/ shady trees (plant height 2 to 4 mtr.)/ palm varieties of height (plant height 2 to 4 mtr.) in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs. (As per P&G DSR 2022-23 Items of garden work,Sr No.12) Filling fresh garden soil / silt & manure in excavated pit size area of 1.00 x 1.00 x 1.00m (1/10 of unskilled labour)(As per P&G DSR 2022-23 Items of garden work,Sr No.22) Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species as directed etc. complete for required pit size 1.00 x 1.00 x 1.00m.(1/10 of semiskilled labour)(As per P&G DSR 2022-23 Items of garden work,Sr No.27) Maintainance of Newly Planted tree varities having height 2mtr. - 4mtr. For First 30 days Only (As per P&G DSR 2022-23 Items of garden work,Srs No.35) Planting Bamboo trees :- Digging pit with size 0.3m x 0.3mx 0.3m, removing conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil farm yard manure upto a height of 0.3m. In proportion. Mixing soil and manure thoroughly well, levelling , watering on previous night. Planting healthy bamboo trees saplings as per specification. Maintaining till well established by watering, stirring, of soil and manure, replacing casualties and transportation of plants to site etc. complete. Spiral Slide:- Providing and fabricating and erecting spiral slide with ISI mark G.I. Pipe assembly constitutes of the following. The sliding chute shall be made up of fiber reinforced plastic (FRP) type moulded one and shall be painted with attractive colours and shade, minimum joints shall be provided FRP spiral slide. The design of spiral is such that the children would not fall down while sliding in rotation towards down slide. The FRP slide shall be of 6 mm thick and should be finished both side with specialty designed horizontal landing where the child is going to got hurt. Platform height 3.0mtr. of aluminum chequred plate 3 mm thick with railing shall made up of FRP with safe railing having 20 NB GI pipe for grip, with a height of 500 mm recommended in the international safety standards. Central support pipe shall be made up of NB G.I ISI mark pipe with suitable arrangement. (length 4.0 m) Ladder, Railing and steps made up of 20 mm NB G.I. pipe with steps for ladder 12 Nos. length 0.4 m) Platform support pipe shall be made of 40 mm NB G.I. pipe 2nos of (3.5 m per no) G.I. pipe with proper foundation arrangement. The sate play area shall be a minimum of 3.5mtrs x 2.8mtrs. the painting shall be of required quality and support pipe are embedded in C.C. 2:4) mix of size 0.45 x 0.45 x 0.50 m and one coat of anticorrosive paint over it two coats of oil painting of approved quality and shade etc. complete as per design and drawing. All pipes are G.I. ISI ‘B’ class. Wave Slide ( FRP ( Fiber Reinforced Plastic) Roto Molding ( LLDPE/HDPE)Rec. Age 4-12 yearThe area :- 4.8 m x 0.5 mSafe play area :- 5.8 m x 1.5 mHeight 1.5 m This item consists of ISI marked structure. The attractive wave slide chute is made up of 4 mm thick fiber reinforced plastic materials. The structure comprises of 20 NB 25 NB powder coated GI pipe. The center support is made in 80 NB powder coated GI pipe.:The ladder cum railing is made 20 NB 25 NB GI pipes.The platform is made up 14 SWG GI sheet with anti skid for firm foot grip. There are triangular steps 16 SWG sheet. The chute has its end such as it causes safe landing of the child.All pipes are class pipes.All Structure Are of Powder CoatingAll Work done as per general Raw Material Sheet Added Below. Animal Merry Go Round - 4 Seater:- Rec.Age :- 3-12 yrs. The area :- 1.5 m dia Safe play area :- 2.5 m dia The mainframe of the animal merry go round is made up of 25 NB & 40 NB GI pipes. The GI pipes are powder coated. The stand is made in 80 NB GI pipes. All pipes are ‘A’ class pipes. The whole structure is mounted heavy-duty bearing shaft permanently lubricated with water sealant.The animal seats made out of molded plastic in rotational molding process (LLDP/HDPE) It accommodates 4 children at a time. Structure are of Powder Coating Work Done As Per General Raw Material Sheet Added Below. Multi Seater See-Saw:- Rec.Age :- 3-10 yrs. The area :- 3m x 0.5 m Safe play area :- 4 m x 1.5 m The MS See-Saw comprises four FRP FIBER REINFORCED PLASTIC/ROTO MOLDING (LLDPE/HDPE) Seats The lever is consisted of 20 NB and 80 NB powder coated GI pipes. The bearing used in this item is heavy duty nylon bush type. The stand for see-saw is made using 50 NB GI pipe All pipes are ‘A’ class pipes All Structure Are of Powder Coating All Work Done as per General Raw Material Sheet added Below. SATELLITE SCRAMBLER :-Rec.Age :- 4-12yrs.The area :- 2.4 M X 2.4 MSafe play area :- 3.4 m x 3.4 mHeight :- 3.4 M This item comprises top globular frame, ladder frame and support columm and steps. The pipes used in this item are 25 NB and 40 NB GI pipes.The top globe is fabricated from 25 NB GI pipes supported on a 40 NB vertical GI pipes. All pipes are ‘A’ class pipes.The structure is powder coated to avoid rusting and for esthetic look. The steps of the ladders are made from 15 NB GI pipes. The chain ladder is 7 mmThick for climbing the scramblerAll Structure Are of Powder CoatingAll Work Done as per General Raw Material Sheet added Below DOUBLE BAR :- Rec.Age :- 6-14 yrs. The area :- 1.9 M X 1.5 M Safe play area :- 2.9 m x 2.5 m The double bar being from exercise range provides a structure for physical exercise to the children the complete structure is made out using 40 NB powder coated GI pipes. The spacer pipes used are of 25 NB GI pipes All pipes are ‘A’ class pipes. All Structure Are of Powder Coating All Work Done as per General Raw Material Sheet added Below Simple Side (Galvanized iron Chute) :- Providing fabricating and erecting Simplex Side composed of 40 mm dia G.I. ISI mark 2 Nos. (3.00 m length per no) for supporting plant form, 20 mm dia G.I. Pipe for ladder slant 2 Nos. (3 m length per no) steps 11 nos. (0.40 m per no Railing 2 nos. (2.70 m per no) bracing 4 Nos. (0.20 m per no) and vertical 20 mm NB G.I. Pipe dia G.I. Pipe for hand rest at platform level 4Nos (0.45 m per No) 4 Nos. horizontal (0.50 m per no)and for side chute slant 2 Nos.(4.30 m per no) and for middle vertical support of side chute 2 nos. (1.30 m per no) and the end of chute vertical supports 4nos (0.9 m per nos) also M.S. angle 40 x40 mm x 5 mm as stiffeners below chute and along edges length wise (Total length 10.4mtr.) Railing and support pipe embedded in cement Concrete block (1:2:4 mix) of size 0.45 x0.45 x 0.45mtr and 18 Gauge Galvanize iron sheet for slide chute (4.30 m x 0.45 mtr.) and Aluminum chequred sheet 3 mm thick fixed on ISA 40 x 40 x 5 mm thick for platform size (0.50 m x 0.45 m) and one coat of anticorrosive paint and oer it two coat of oil painting of approved quality and shade etc. complete. As per detail design and drawing. All pipes are G.I. ‘B’ class ISI Mark. Rain – Bow – Ladder :- Providing fabricating and creating Rain – Bow – Ladder composed of two semicircular 40 mm NB GI ISI mark pipe (length of one pipe 6.28 m) embedded in cement concrete block ()1:2:4 mix) of size 0.45 x 0.45 x 0.45 m and 20 mm NB GI ISI round pipe 19 nos. (0.50 m length per no) for steps at equal spacing and one coat of anticorrosive paint and over it two coat of oil painting of approved quality and shade etc. complete as per detail design and drawing. All pipes are G.I. ‘B’ class ISI mark. Animal shape Dust Bin (FRP) :- Providing and fixing Penguin / Rabbit shape dust bin of size 2 feet diameter 3.5 feet height made out of animal shape Fiber Reinforcement Plastic structure of 5 mm thick in two colours well finished and smoothened with a door for opening on back side as per drawing and painting in attractive colour combination in synthetic enamels paint. Tube Slide :- Providing fabricating & erecting Tube Slide of platform height 1.5 m composed of 40 mm NB GI ISI mark 2 nos. (2.1 m length per no) for platform 20 mm NB GI ISI mark pipe of total length 23mtr. includes for Ladder slant 2 nos. (2.25 m Length per no) Steps 7 nos. (0.40 m per nos) Railing 2 nos. (2.0 m length per no) Bracing’s 4 nos. (0.2mtr length per no) and for platform 4 nos. (0.45 m length per no) 4 nos. (0.5mtr length per no) and for support 6nos (1.3 m length per no) and sliding chute in tubular shape shall be made up of fiber glass reinforced plastic ( FRP) 5 mm thick molded both side finish shall be with attractive colour a shade with Translucent dia 0.75 m and Translucent length 3.8 m with aluminum chequered plate 3 mm thick of size (0.5 x .04 m) all railing and support pipes are embedded in C.C. blocks M 15 (1:2:4) grade of size 0.30 x 0.30 x 0.50 m and one coat of anticorrosive paint and over it two coat of oil painting of approved quality and shade etc. complete as per detail design and drawing. All pipes are G.I. ‘B’ class ISI mark. Spring Duck Rider :- Made in 40 x 40 x5mm thick angle base with heavy duty spring of 2 Nos. with FRP animal duck of 3mm thickness etc. complete Two seat swing :- providing and fabricating and erecting Two Seat swing composed of to Horizontal ISI mark 50 mm NB G.I. Pipe of 3.0 m in length, vertical inclined G.I. Round Pipe 40 mm NB ISI mark 4nos (2.90 mtr length per No) for leg support and bracing pipe 40 mm NB G.I. Pipe 2 nos. (0.40 m per no) and inclined pipe shall be fixed firmly to top horizontal pipe, leg pipe shall be embedded with hold fast in C.C. bloc (1:2:4 mix) of size 0.45 x 0.45 x 0.45 m and two heavy duty ball bearing assembly for swinging with G.I. chain 8 mm, 4 nos. (2.30 m length per no.) Embedded with hold fast in C.C. bloc (1:2:4 mix) of size 0.45 x 0.45 x 0.45 0.45m and two heavy duty ball bearing assembly for swinging with G.I. chain 8 mm, 4 nos. (2.30m length per no.) and Aluminum chequred sheet 3 mm thick size 0.45 x 0.30mtr per sheet fixed on 15 mm NB G.I. ISI Pipe frame and one coat of anticorrosive paint and over it two coat of oil painting of approved quality and shade etc. complete as per design and drawing. Ornamental Cast iron chair 3 seater weight 100kg. Back rest with casting panel and sitting seat with cast iron Providing,Fixing of Art work made in Polyster Resin Gel Coat Chemical, casting & Molding with minimum 5mm thickness, along MS reinforcement with complete finished with required Primer & Dico colour as per the aesthetic of approved desgin & sizes 2-0 x 3-0 Ht Providing,Fixing of Art work made in Polyster Resin Gel Coat Chemical, casting & Molding with minimum 5mm thickness, along MS reinforcement with complete finished with required Primer & Dico colour as per the aesthetic of approved desgin & sizes 2-6 x 5-0 Ht Providing,Fixing of Art work made in Polyster Resin Gel Coat Chemical, casting & Molding with minimum 5mm thickness, along MS reinforcement with complete finished with required Primer & Dico colour as per the aesthetic of approved desgin & sizes. FRP Mural Providing & Fixing of Customize Acrylic Art Works for Words along with MS Stand of required sizes on plate , Back lite & Acrylic Name as per design & Specification Supplying and installation of following gymnasium equipments including all its fitings such as a) Tubular structure of 100x50x12 gauge thick in bending frame ,b) Bars & handles with all runner bars of 25mm dia and chrome plated,c)pulleys made of nylon and fitted with bearings,d) cushion made of 122mm commercial ply & 40mm thick PE Foam covered with rexine . Total equipments is shot blasted for pretreatment and powder coatigs is 90-100 micron.The equipments are instaaled with transportation and warrenty period as decided by enginner incharge.All equipments should be of international standards & of iported and of premium quality.4 HP AC Motor Treadmill Upight Bike Spin Bike 174 Elliptical Cross Trainer 175 Adjustable ABS Bench 176 Multy Purpose Bench 177 Hyper Extension 178 Multi Adjustable Bench 179 Plate Rack 180 Weight Plates 170.00kgs 181 Dumbbell Rack 182 Dumbbells 170.00kgs 183 4 station Multi Gym 184 Flat Bench 185 Flat Bench Press 186 Incline Bench Pass 187 Decline Bench press 188 Lat Pulldown 189 Bicep Curl Machine 190 Leg Extension 191 Chest Press 192 Seated Leg Curl 193 Pec Fly Rear Delt 194 Assisted Dip Chin 195 Leg Press Cum Hack Squat 196 T Bar 197 Cable Crossover 198 Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. 199 Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (HeatReflective Paint). ( Part-B ) 1 Royalty Charges on Mining materials used in construction. Sand 2 Royalty Charges on Mining materials used in construction. Murum & Soling Metal 3 Carrying out test of Murrum transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. i) Sieve Analysis Carrying out test of Murrum transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local district/ regional laboratory etc. complete. ii) Liqiud limit & plastic limit Carrying out test of Murrum transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local district/ regional laboratory etc. complete. ii) Compaction Test( proctor Density ) Carrying out test of concrete casted at site in the form of cubes of 150x150x150mm size casted during conctering in the laboratory including conveying the cubes/material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. i) Compessive strength Carrying out Mix design with all Tests on Concrete Mix Design basic materials of concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. Carrying out Basic test of Cement Standard Consistency,Fineness, Specific gravity, setting time (initial & Final)Compressive Strength,soudness in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. i) Crushing value, ii) Impact value, iii) Specific gravity, iv) Water absorption Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. v) Sieve lanalysis Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. vii) Abrasion Value Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. vi) Flakiness Index & Elongation Index. Fineness Modulus (sieve Analysi) Silt & Clay Content Chloride & Sulphate Content Silt Factor Testing of Steel Upto 16 mm (Set of 3 Bars) Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.) Carrying out various test of HYSD / TMT FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. i) Weight / metre, ii) Ultimate tensile stess, iii) Yield stress, iv) Elongation Test, a) Above 16mm dia. Testing of Bricks for- Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). Density Test,Compressive Strength , Water Absorption Testing of Wood for Density and Moisture Content Testing of Flush door for Knife Test, Adhesion Test, End Immersion Test. Testing of Aluminium Section , thickness, mass per running meter GSB Mix design Carrying out Standard test of water Absorption , Flexural test on Flooring Tiles Ceramic tiles/Vetrified tiles etc.) in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local district/ regional laboratory etc. complete.(i) Water Absorption (Set of 6 Tiles, Flextural test (Set of 6 tiles) Carrying out Standard test of specific gravity on Flooring Stones (Kota Stone/graite Stones Stones etc.) in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete Carrying out test of PH Value, Sulphate & Chloride Content on Water in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local district/ regional laboratory etc. complete.
