Tender For Purchase And Installation Of Minimast Light - Project No 226/26 - Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 155 mm bottom diameter thickness 3mm base plate dimensions of 250x250x16 mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos fixed in existing RCC foundation adn junction box etc, complet 9 Meters 2 Supply Conveyance, installation, testing and commissioning of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection upto8KV, and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 3 Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 Vgrade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm 4 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessedsteel/PVC conduit as required.1 x 1.5 sq. mm 5 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessedsteel/PVC conduit as required.2x2.5 sq. mm 6 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages,colour washing etc. as required. 2 core 6 sq mm with factory made clamp 7 Supplying and making end termination with brass compression gland and aluminium lugs forfollowing size of PVC insulated and PVC sheathed/XLPE aluminiumc onductor cable of 1.1 KVgrade as required.2 X 6 sq. mm (19mm) 8 Supply & laying of DWC pipe in ordinary soil 0.75 m below ground level including excavation 50/38 mm or nearest size 9 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole 10 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 11 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current up to300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps 12 Supply and fixing Analog timer of Havells (CatNo.DHTED30016) or similar make of Theben,OBO, L&T etc. 13 9 A, 3 pole power Contacts, AC 3 rating at 230/415 V,with AC Coil, Auxiliary contacts, 1 NO/INC 14 supply conveyance installation of dust and vermin proof, wall mounting, thermoplastic meter box of following size suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit-.650x350x210mm 15 Earthing with G.I. earth pipe 2 metre long, 40mm dia including accessories,and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( with charcoal/ coke and salt ) as required. 16 Supply and drawing bare earthing conductors of the following sizes along with wiring/cables and giving connection as required 3.25mm GI conductor (10SWG) 17 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) 18 Supply and providing the 25 x 3mm brass bolt & amp; nut with washers on the existing MS box/earth bus etc. as required including drilling necessary holes as required 19 Supply and fixing the following accessories in the existing meter board and giving connectionsetc.32 A, 415 V, 2 way neutral link mounted on DMC/ SMC base 20 Supply and fixing the following accessories in the existing meter board and giving connectionsetc.32 A fuse holder with fuse link 21 Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board 22 Excavation for foundation in soft soi lincluding dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. 23 Providing and laying in position cement concrete 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. 24 Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels 25 Lumsum HeadingLS amount for Remuneration and Supervision charge
