}

Tender For Spl Repair To Internal Roads Of Basant Enclave Under Ge Missamari, missamari-Assam

Military Engineer Services has published Tender For Spl Repair To Internal Roads Of Basant Enclave Under Ge Missamari. Submission Date for this Tender is 09-09-2025. Paver Blocking Tenders in missamari Assam. Bidders can get complete Tender details and download the document.




Tender Notice

50647026
Tender For Spl Repair To Internal Roads Of Basant Enclave Under Ge Missamari
Tender
Indian
Assam
Missamari
09-09-2025

Tender Details

Tender For Spl Repair To Internal Roads Of Basant Enclave Under Ge Missamari; 1 Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400sqm 2 Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mudor water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth,making good by filling in screened & graded road material, watering and well ramming (including supply of road metal) complete all as specified and directed. 3 M&L 15 cm thick (7.5 cm thick compacted thickness) in two layersWBM, with coarse aggregates of grading 2 (63 to 40mm size) of grading basalt or trap stone spread,Watered , rolledconsolidated to gradient and camber required by power roller 8 -12 tone complete all as specifed and directed. 4 M&L 7.5 cm thick (compacted thickness)WBM with coarse aggregates of grading 2 (63 to 40mm size) of grading basalt or trap stone spread,watered , rolledconsolidated to gradient and camber required by power roller 8 -12 tone complete all as specifed and directed. 5 M & L forapplying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at a rate of application of 0.7-1 kg/sqm on surface of WMMIVVBM as specified in Table 500-3 of MoRTH specification for Road and Bridge Works 2013, using mechanical sprayer including cleaning the premises complete all as specified and directed. 6 M & L for applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for Road and Bridge Works 2013, using mechanical sprayer including cleaning of existing surfacecomplete all as specified and directed. 7 M&L for Premix bituminous, macadam compacted thickness 75 mm or less with 4% binder content by weight of total mix using VG-30 bitumen of any penetration laid /rolled to required gradient and camber using power roller 8-12 tonnes complete all as specifed and directed 8 M&L for providing Bituminous premix semi dense asphaltic concrete 40mm thick compactedwith 5.5 % binder content as in semi-dense asphaltic concrete total mix. Rolled with 8 to 12 tonne power roller to required camber and gradient complete all as specifed and directed. 9 S&F Solar Light Road studs LED based of size (108x108x25mm ) (Model -DA-110-DHRUV of SINOR ) with Aluminium alloy body and Solar powered by nionocrystal solar panel with one high capacity NI-CD Recahrgeable battery and three LED on each side (total six LEDs) fixed with araldite solution /12 mm dia 125 mm long pointed nails as directed. 10 Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972 fixed with and incl MS stud of suitable size as per manufactures instruction complete all as specified and directed. 11 M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the likes on roads pavements with hot applied thermo plastic road marking paint (Hot melted mixture of resins, glass beads, pigments, and fillers) of approved colour confirming to BS 3262-1989 with special applicator machineas per manufacturers instruction complete all as specified and directed. 12 Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) 13 M&L for 100mm thick PCC type B2 1:2:4 using (40mm graded aggregate) as in sub base floor complete all as specified and directed. 14 M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & patteren as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape made by table vibrato method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand 15 M&L for providing cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) set in cement mortar 1:6 in kerb stone with plain fair faces incl necessary excavation if required complete all specified and directed 16 M&L cement concrete (1:2:4) type B-1 as in roof kerbs stone or mud stops, rounded or chamfered on edges complete all as specified and directed

Key Value

Document Fees
INR 1000 /-
EMD
INR 220000.0 /-
Tender Value
INR 1.45 Crore /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail