Tender For Repair / Maintenance / Day To Day Services And Repairs To Internal Plumbing, Sanitary Fittings, Joinery, Flooring, Masonry Finishes, Kitchen Cabinets Cup - Boards To Bldgs, Walls And Allied Works At New Project And Old Project Areaat 24 Ed Af S
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Sep 2025
0 days left
EMD
19800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
manauri → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
REPAIR / MAINTENANCE / DAY TO DAY SERVICES AND REPAIRS TO INTERNAL PLUMBING, SANITARY FITTINGS, JOINERY, FLOORING, MASONRY FINISHES, KITCHEN CABINETS CUP - BOARDS TO BLDGS, WALLS AND ALLIED WORKS AT NEW PROJECT AND OLD PROJECT AREAAT 24 ED AF STN MANAURI
BOQ
| Sl. No. | Item Description |
| 1 | Attending complaintslike leakge of taps, angle valve, stop cocks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves water tanks, gratings, traps , WCs flushing cistern, waste pipes, WHBs, EWCs and similar workfor continuity of essential internal water supply/sanitary services by employing an experienced team of plumbers and helpers to restore the existing/services to the satisfaction of Engineer-in-Charge.Note :- (i) T&P including conveyance to reach door to door for attending the jobs will be provided by the contractor.(ii) Material will provided by seggregation of complaints (72 Hours/3 days/15 days/30 days) to the contractor and will be seperatly measured & paid as per item concerned.(iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor or auth rep in writing.(iv) The area/Location of Job will be all MD and OTM accn in AF stn 24 ED |
| 2 | Dismantling / taking downlong body bib cock / stop cock/Pillar Cock/Angle cock etc of any pattern or of any type andre-fixing the same after minor repairs such as replacement of washers and major repair such as jumper brass, spindle/ caps etc or refixing old serviceable bib cocks/ stop cocks/ pillar cock/angle cock any pattern complete all as specified and directed. Note - Any major parts such as jumpers brass/ spindles/ caps any type etc to be measured as supply only in conjuction with this item and paid for accordingly) |
| 3 | Supply only GI water tubing/pipe 15 mm bore with alll fittings fixed to wall or laid in floors or celingscompete all as specified and directed |
| 4 | Supply only GI water tubing/pipe 20 mm bore with alll fittings fixed to wall or laid in floors or celings compete all as specified and directed. |
| 5 | Supply and fixing in repair GI water tubing/pipe 15 mm bore with alll fittings fixed to wall or laid in floors or celingscompete all as specified and directed |
| 6 | Supply and fixing in repair GI water tubing/pipe 20 mm bore with alll fittings fixed to wall or laid in floors or celingscompete all as specified and directed. |
| 7 | Supply only 15mm CP pillar cock.compete all as specified and directed.Make cera or equivalent |
| 8 | Supply only 15mm PTMT pillar cock compete all as specified and directed. Make Prayag or equivalent with Cat Part No 7302 |
| 9 | Supply only 15mm CP bib cock with nozzle and flange compete all as specified and directed. . Make ceraor equivalent |
| 10 | Supply only 15mm CP bib cock with flange compete all as specified and directed. . Make ceraor equivalent |
| 11 | Supply only 15mm PTMT bib cock long body with flange. Make compete all as specified and directed.ceraor equivalent |
| 12 | Supply only 15mm PTMT bib cock short body with flange compete all as specified and directed. . Makeceraor equivalent |
| 13 | Supply only 15mm CP angle cock with flange compete all as specified and directed. . Make ceraor equivalent |
| 14 | Supply only 15mm PTMT angle cock with flange compete all as specified and directed. . Make ceraor equivalent |
| 15 | Supply only 15mm CP 2 way angle cock with flange compete all as specified and directed. . Make ceraor equivalent |
| 16 | Supply only 15mm CP 2 way bib cock with flange compete all as specified and directed. . Make ceraor equivalent |
| 17 | Supply only concelated stop cock 15mm with flange compete all as specified and directed. . Make ceraor equivalent |
| 18 | Supply only concelated stop cock 20mm with flange compete all as specified and directed. . Make ceraor equivalent |
| 19 | Supply only CP sink bib cock 15mm with flange. Make ceraor equivalent |
| 20 | Supply only overhead rain shower SS 150mm dia (6\"). compete all as specified and directed.Cera or equivalent with Cat Part No F7010211SS |
| 21 | Supply only 15mm dia overhead shower arm SS 200mm (8\") with flange compete all as specified and directed. . Cera or equivalent with Cat Part No F7040102 |
| 22 | Supply only 15mm health faucet ABS body with 1.25 Mtr SS braided connection pipe compete all as specified and directed. . Cera or equivalent |
| 23 | Supply only towel rail 600mm (24\") compete all as specified and directed. . Cera or equivalent with Cat Part No F5007103 |
| 24 | Supply only soap dish compete all as specified and directed. . Cera or equivalent with Cat Part No F5007106 |
| 25 | Supply only 20mmball brass valves,high pressure, with polythelne float and fly nutin 20mm bore complete all as specified and directed. |
| 26 | Supply only corner glass shelf (large) 300 x 300mm (12\" x 12\") compete all as specified and directed. . Cera or equivalent with Cat Part No F5005103 |
| 27 | Dismantling water tanks of 500 Ltrs complete all as specified and directed |
| 28 | S & FRotational moulded polethelene water storage tanks in 500 litres capasity (cylinderical vertical & triple layer with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete, ISI marked, all as specified and directed. |
| 29 | Dismantling existing 1000 Ltrs water tanks, setting aside, cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and re-fixing in position and including writing date of cleaning by stencils using synthetic enamel paint on tank all as directed and specified by Engr-in-Charge |
| 30 | Supply onlycover for HDPE water tank of capacity 500/1000 ltrs rotating type including frame including nut bolt complete all as specified and directed by Engr-in-Charge. |
| 31 | Supply only waste coupling (full thread) 32mm.complete all as specified and directed. |
| 32 | Supply only PVC waste coupling of 40 mm size for sink , etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. |
| 33 | S & F in repairs vitreous china squatting pan, \"Orissa\" pattern, size 580 x 440 mm, white, with integral foot rests complete including provision of lime concrete bedding and connection to trap, & to flushing pipe, anti-syphonage pipe, etc, complete including making good to floor complete all as specified and directed by Engr-in-Charge. |
| 34 | S & F in repairs vitreous china wash down water closed pan (pedesstal pattern/EWC), white with fixing bolts, trap, including connection to drain (or outgoing pipe) & to flushing pipe, antisyphonage pipe, etc, seat and cover complete all as specified and directed by Engr-in-Charge. |
| 35 | Supply only32/40 mm in size flush kit/valve for flushing cistern complete all as specified and directed. |
| 36 | Supply only 32/40 mm in size brass flush kit/valve piston for flushing cistern complete all as specified and directed. |
| 37 | S & F in repairs white 10 Ltrs PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipe complete all as specified and directed by Engr-in-Charge. |
| 38 | S & F in repairs Vitreous China wash basin, white, flat back, size 580x450mmexcluding taps, waste, chain and plug and porcelain stopper but including bracketscomplete all as specified and directed by Engr-in-Charge |
| 39 | S & F in repairs vitreous china half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge. |
| 40 | Supply only PVC waste pipe for sink/basin of size 32mm/40mm complete all as specified and directed by Engr-in-Charge. |
| 41 | Supply only PVC waste pipe for urinal complete all as specified and directed by Engr-in-Charge. |
| 42 | S & F in repairs SS plate rack of size 787 x 762 x 254mm of 0.60mm thickness fixed with necessary fixing arrrangements including neessary fasteners, screws etc. Make Bluestar or equivalent with Cat Pat No SSKPR-314 |
| 43 | Supply only600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 44 | Supply only PVC connection pipe 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-Charge |
| 45 | Supply only PVC connection pipe 15mm size with PTMT nuts of length 750mm complete all as specified and directed by Engr-in-Charge |
| 46 | S&F in replacement 15mm chromium plated single liver basin mixer with 450mm braided connection pipe (without popup) with bend pipe & fittingsall as directed and specified by Engr-in-Charge. |
| 47 | S&F in replacement 15mm chromium plated single liver sinkmixer with 450mm braided connection pipe (without popup) with bend pipe & fittings complete all as specified and directed by Engr-in-Charge. |
| 48 | S & F in repairs flush pipes of polythylene of low or high density or PVC, 32mm dia for low level cistern to pedestal pan, including all jointscomplete all as specified and directed by Engr-in-Charge. |
| 49 | S & F in repairs flush pipes of polythylene of low or high density or PVC, 32mm dia for low level cistern to squatt pattern closet including all joints and making good to the floorcomplete all as specified and directed by Engr-in-Charge. |
| 50 | Supply onlygrating doom 100mm dia of PTMT (Min weight 25 gms)complete all as specified and directed by Engr-in-Charge. |
| 51 | Supply onlygrating doom with hole100mm dia of PTMT (Min weight 25 gms)complete all as specified and directed by Engr-in-Charge. |
| 52 | S & F in repairs 110 mm PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to wall and floorscomplete all as specified and directed by Engr-in-Charge. |
| 53 | S & F PVC (SWR) 75mm pipes single socketed in any length with rubber ring joints fixed to walls and floorscomplete all as specified and directed by Engr-in-Charge. |
| 54 | S & F 110mm PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge. |
| 55 | S & F 75mm thick PVC (SWR) bends any radiuscomplete all as specified and directed by Engr-in-Charge. |
| 56 | S&F in replacement accessories kit suitable for concealed body wall mounted diverterall as directed and specified by Engr-in-Charge. |
| 57 | S & F in repairs 110mm PVC (SWR) \"P\" trapcomplete all as specified and directed by Engr-in-Charge. |
| 58 | S & F in repairs 110mm PVC (SWR) \"S\" trap complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F in repair wall mounted stainless steel automatic urinal flush sensor set dual power supply mode chrome plated sensor for urinal complete all as specified and directed. |
| 60 | Supply only 15-20mm(out side dia-20 mm) GI reducer complete all as specified and directed by Engr-in-Charge. |
| 61 | Supply only 20 mm bore GI Union complete all as specified and directed by Engr-in-Charge. |
| 62 | Supply only 20 mm bore GI Elbow complete all as specified and directed by Engr-in-Charge. |
| 63 | Supply only 20 mm bore GI socketcomplete all as specified and directed by Engr-in-Charge. |
| 64 | Supply only 15 mm bore GI Tee completeall as specified and directed by Engr-in-Charge. |
| 65 | Supply only 15 mm bore GI Union complete all as specified and directed by Engr-in-Charge. |
| 66 | Supply only 15 mm bore GI Elbow complete all as specified and directed by Engr-in-Charge. |
| 67 | Supply only 15 mm bore GI complete all as specified and directed by Engr-in-Charge. |
| 68 | Supply only 15 mm bore 150 mm long Nipple complete all as specified and directed by Engr-in-Charge. |
| 69 | Supply only 15 mmbore 100 mm long Nipplecomplete all as specified and directed by Engr-in-Charge. |
| 70 | Supply only 15 mmGI nipple fully threaded with two numbers check nuts and washers 100mm long for PVC tank with back nut and washers for inlet and outlet pipe of as reqd sizes complete all as specified and directed by Engr-in-Charge. |
| 71 | Supply only 20 mm GI nipple fully threaded with two numbers check nuts and washers 100mm long for PVC tank with back nut and washers for inlet and outlet pipe complete all as specified and directed by Engr-in-Charge. |
| 72 | Attending complaintsrelated to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types ofnails, screws etc which are required to make good the work, use of any other stores/fittings shall be paid seprately under Supply only items inbuilding to continuity of essential carpentry service by employing a team of experienced carpenters with a helpers to restore the existing service to the satisfaction of Engineer-in-Charge and including taking down and removing of joinery fittings rtc comlete all as directed T&P for attending the job will be provided by the contractorcomplete all as specified and directed by Engr-in-Charge.Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor.(ii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor \"s supervisor (auth rep).(iii) The area/Location of Job will be all MD and OTM accnof 24 ED AF stn |
| 73 | Hacking out old broken glass from metal frame including punching or drilling out old glazingcomplete |
| 74 | M & L for 4mm thick plain sheet glass ordinary quality including glazing with putty area area n.exc 0.5 Sqm in each panecomplete all as specified and directed by Engr-in-Charge. |
| 75 | S & F solar control film 25 micron reflective type sticked to glass planes as per instructions of manufacturers including removal of existing film complete all as specified and directed. |
| 76 | Supply only PVC cabinet with mirror, of size 350 mm x 450 mm, fixed to wall with screw all as specified and as directed. |
| 77 | Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge. |
| 78 | Supply only 250 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, complete all as specified and directed. |
| 79 | Supply only 250 mm long aluminium anoised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, complete all as specified and directed. |
| 80 | Supply only 100 mm long Stainless steel hinges all as specified and as dierected by Engineer-In-Charge. |
| 81 | Supply only 100 mm size stainless steel handleall as specified and as dierected by Engineer-In-Charge. |
| 82 | Supply only 150 mm size stainless steel handle, fabricated type all as specified and as dierected by Engineer-In-Charge. |
| 83 | Supply only 100 mm size aluminium anodised handleall as specified and as dierected by Engineer-In-Charge. |
| 84 | Supply only 150 mm size aluminium anodised handle, fabricated type all as specified and as dierected by Engineer-In-Charge. |
| 85 | Supply only75mm anodised aluminium handles complete all as specified and directed by Engr-in-Charge. |
| 86 | Supply only 100 mm long stainless steel barrel tower bolt all as specified and as dierected by Engineer-In-Charge. |
| 87 | Supply only 150 mm long stainless steel barrel tower bolts all as specified and as dierected by Engineer-In-Charge. |
| 88 | Supply only 100 mm long aluminium anodised barrel tower bolt all as specified and as dierected by Engineer-In-Charge. |
| 89 | Supply only 150 mm long aluminium anodised barrel tower bolts all as specified and as dierected by Engineer-In-Charge. |
| 90 | Supply and fixing in repair aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed by Engr-in-Charge. |
| 91 | Supply only 100 mm size4-lever mild steel mortice lock vertical type with two keys etccomplete all as specified and directed by Engr-in-Charge. |
| 92 | Supply only floor door stopper of Aluminium anodised body and tounge anodised with hard drawn steel spring of cover plate length of 150 mm sizecomplete all as specified and directed by Engr-in-Charge. |
| 93 | Supply and fixing in repair aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed by Engr-in-Charge. |
| 94 | Supply only 100 mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screwscomplete all as specified and directed by Engr-in-Charge. |
| 95 | Supply only Door Seal length of each door seal is equal to width of door fixed to door bottom rail including all fixing arrangement such as screws ,nails etc complete all as specified and directed by Engr-in-Charge. |
| 96 | S&F in repair stainless steelcurtain rod 25 mm dia incl. brackets and curtain rod holders of suitable size at ends etc complete all as specified and directed. |
| 97 | Attending complaints related to black smith work and obtaining completion from user for resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc by employing experienced Black smith with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept..All as directed T&P for attending the job will be provided by the contractor.Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor (auth rep).(iv) The area/Location of Job will be all MD and OTM accn in AOR 24 ED AF Stn. |
| 98 | Supply only 250 mm size mild steel peg stay fixed to steel window (as per sample) complete all as specified and directed by Engr-in-Charge. |
| 99 | Supply only mild steel handle for steel window etc complete all as specified and directed. |
| 100 | Spot welding in repair for fixing hinges/handle/ bolts/helical door springetc complete all as specified and directed by Engr-in-Charge. |
| 101 | M&L for brick work with sub class \"B\"bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 4). complete all as specified and directed by Engr-in-Charge. |
| 102 | M&L brick work withwith sub class \"B\"bricksstraight or curved on plan not exc 6 m mean radius built in CM 1: 6 complete all as specified and directed by Engr-in-Charge. |
| 103 | M&L brick work with sub class B brick straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified.(Except brick) |
| 104 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 105 | M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 finished even and fair. complete all as specified and directed. |
| 106 | M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 finished even and fair. complete all as specified and directed. |
| 107 | M & L for preparation of new plastered surfaces of wall and applying two coats of Oil Bound Distemper over priming surfaces complete all as specified and directed by Engr-in-Charge. |
| 108 | M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge. |
| 109 | Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish offpremises etccomplete all as specified and directed by Eng-in-Charge. |
| 110 | M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed by Eng-in-Charge. |
| 111 | M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqmas in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Eng-in-Charge. |
| 112 | M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick/300mm x 200mm x 6to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Eng-in-Charge. |
| 113 | Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed by the Engineer-in-Charge. |
| 114 | M&L brick work with sub class \"B\" old size bricks, straight or curved on plan exec 6m mean radius built in CM 1:6 complete all as specified and directed by the Engineer-in-Charge. |
| 115 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Engr-in-charge. |
| 116 | M&L for providing75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate , finished even and smooth with using extra cement etc complete all as specified and directed by Engr-in-charge. |
| 117 | M & L for 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 118 | M & L for 75mm ThickCement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in Plinth Protection etc. complete all as specified and directed by Eng-in-Charge. |
| 119 | Resecuring or easing & adjusting without taking down door shutter area exc. 1 Sqm but n exc 2 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 120 | Taking down chowkhat with shutter without taking off shutter from chowkhatof any description not exceeding 1.5 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 121 | Taking down chowkhat with shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 122 | Taking down Shutters of any description exc 1 sqm but n. exc. 4.00 sqm each complete all as specified and directed by Engr-in-Charge. |
| 123 | Dismantling MS work of any description not otherwise provided forcomplete all as specified and directed by Engr-in-Charge. |
| 124 | S & F MS framed work such as grills, gratings, frames,holdfast etc with ends of bars shouldered and or riveted or forgot into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar workcomplete all as specified and directed by Engr-in-Charge. |
| 125 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tubecomplete all as specified and directed . |
| 126 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MSframe shall be covered with heat moulded plain colourPVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 andcomplete all as specified and directed by Engr-in-Charge. |
| 127 | S & F for pressed steel door frames of size 105 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engr-in-Charge. |
| 128 | S & F for pressed steel door frames of size 125 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engr-in-Charge. |
| 129 | M & L for PCC type C-1 (1:3:6) using 12.5mm graded stone aggregate as in filling of hollow pressed steel frame etc complete all as specified and directed by Engr-in-Charge. |
| 130 | S & F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated & prepared to receive glass, gauze, etc(without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads forscuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I,section 8, clause 8.24 (a); supplied and fitted to chowkatscomplete all as specified and directed by Engr-in-Charge. |
| 131 | S & F30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both sidefixedto chowkhat complete all as specified and directed by Engr-in-Charge. |
| 132 | S&Fstainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge. |
| 133 | S&F100 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge. |
| 134 | S&F75 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge. |
| 135 | S&Fextruded aluminium alloy handles, anodized 150 mm size complete all as specified and directed by Engr-in-Charge. |
| 136 | S&F Aluminum Barrel tower bolt 125mm complete all as specified and directed by Engr-in-Charge. |
| 137 | S&F aluminium anodised 250mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type complete all as specified and directed by Engr-in-Charge. |
| 138 | M & L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 139 | M & L for preparation of new or previously untreated surface of steel or steel based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 140 | Taking down Aluminium shutters and dismantling stiles & rails including glass panes/particle board carefully.Refabricating and refixing in frame position using all old material including replacement of required neoprene packing,cleats,screws with necessary Aluminium angle cleat screws etc. complete all as specified and directed by Engineer in charge. |
| 141 | S & Fin repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick Aluminium alloy sheet foundation box, main body with stainless steel cover, groverning pivot made of brass, other parts made of mild steel heavy duty made and fixed complete all as specified and directed by Engr-in-Charge. |
| 142 | S& F in repair stainless steel kitchen cabinet drawer rolling channel eye moove soft close ball bearing teliscopic channel of size 500mmx35mm in any colour complete all as specified and directed by Engr-in-Charge. |
| 143 | Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.(ii) Make of material shall be as per mentioned in Particular specifications or Appendix \"B\" to Particular specifications as approved by AGE (I) AF manauri |
AI Tender Summary
Tender Timeline
Aug 12, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 03, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender