Tender For Repair To Wooden Furniture Including Polishing To Wooden Furniture Under Ge (Army) No 2 Jodhpur; 1 Replacement of following U/S parts of Bed Hard with ply top with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg at site and directed by Engr-In-Charge. ( FD-21, 246,264) 2 S&F 04 mm thick both side teak face ply all over the head rest of bed including teak wood beading. 3 S&F 04 mm thick both side teak face ply all over the foot rest of bed including teak wood beading . 4 S&F new long rail made out of teak wood size1800x90x35mm as per drg and directedby Engr in charge. 5 S&F new short rail/center stiffner made out of teak wood size 900x90x35mmas per drg . 6 S&F new 12mm thick BWP phenol bonded commercial plywood of size 1800x900mm , fitted with suitable nut & bolt complete to match the existing shape and size. (Green Ply/Century Ply) 7 Tightening of complete Bed Hardby suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 8 M&Lfor oneor more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 9 Replacement of following U/S parts of Chair Dining JCOs /ORs with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drgat site and directed by Engr-In-Charge. (FD/MAP-II/05) 10 S&F of new4mm thick PVC seat with holes &is not less than 0.500 kgs alongwith wooden support in the middle as directed by Engr-in-Charge. (Make-Amko/Cello) 11 S&F of new Rubber shoes 12 S&F of new Front leg(teak wood) 13 S&F of new Rear legs (teak wood) 14 S&F of new Front/rear rail (teak wood) 15 S&F of new Stiffeners. 16 Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 17 M&Lfor oneor more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 18 Replacement of following U/S parts of Chair Writing FD with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site and directed by Engr-In-Charge. (FD-202, 250,280). 19 S&F of new Front legs 20 S&F of new Rear legs 21 S&F of new Front/ back rails (including holes for caning) 22 S&F of new Side rails (including holes for caning) 23 S&F of new Arm/Handles 24 S&F of new Stiffeners 25 Rubber shoes 26 Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 27 M&Lfor oneor more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 28 Replacement of following U/S parts of Chair Dining FD with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site and directed by Engr-In-Charge.(FD-228, 279 ) 29 S&F of new Front legs 30 S&F of new Rear legs 31 S&F of new Front/ back rails (including holes for caning) 32 S&F of new Side rails (including holes for caning) 33 S&F of new Stiffeners 34 Rubber shoes 35 Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 36 M&Lfor oneor more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 37 Replacement of following u/s parts of Chair dining MAP Officer with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg at site and directed by Engr-In-Charge. (FD/MAP-II/04) 38 S&Fof front legs. 39 S&F of rear legs. 40 S&Fof stiffeners. 41 Replacement of old torn u/s cloth of seat with new synthatic tapestry cloth of best quality not less than Rs. 350/mtr as approved by GE, along with new markin cloth of matching colours as per drg or as directed. 42 Renewalof u/s plywood of seat with 6mm new comercial plywood. 43 Renewal of u/s foam of seat with new foam of 75mm thick with 40 density and fixing it with seat as per drg or as directed. 44 S&F of new Buffers 45 Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 46 M&Loneor more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 47 Replacement of following U/S parts of Chair Easy FD with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site and directed by Engr-In-Charge. (FD-229) 48 S&F of new Front/Rear legs 49 S&F of new Side rails (including holes for caning) 50 S&F of new Front/Rear rails (including holes for caning) 51 S&F of new Arm/Handles 52 S&F of new Stiffeners 53 Buffers 54 Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 55 M&Lfor oneor more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 56 Replacement of following U/S parts of Hat Stand with suitable new parts of existing shape & size complete to match the original as shown on drgat siteand directed by Engr-In-Charge.(FD-23, 233, 362) 57 S&F 4mm thick teak face decorative plywood fixed with fevicol tipped with teak wood edging all round size 1330x710 mm as per drg and as directed by Engr-in-Charge. 58 S&F of Mirror of size 300x440x5mm thick as per drg. Mke-Saint Gobin/Modi Guard 59 S&F of Aluminium Peg set 120 mm with mark of approved shape and size. 60 M&Lfor two or more coat french polish with high class finishing. 61 Replacement of following U/S parts of Peg Table with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site and directed by Engr-In-Charge.(FD-277) 62 S&F new top of 18mm thickMDFboard of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed. Make-Century/Greenply/Action Tesa 63 Legs 64 Long rails 65 Short rails 66 Stiffeners 67 Buffers 68 Tightening of complete Peg Table by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 69 M&Lfor oneor more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 70 Replacement of following unserviceable parts of Table Bed Side with suitable new parts of existing shape & size complete to match the original as shown on drg at siteand directed by Engr-In-Charge. (FD-248, 276) 71 S&F new side planks of size 230x510mm, made out of 18mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round PVC edgebeading as per drg. 72 S&F new top of size 230x450mm, made out of 18mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round PVCbeading as per drg. 73 S&F new 6mm thick back ply of size 510x450mm as per drg. 74 S&F new shelf made out of 18mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round PVC edge beading as per drg. 75 Replacement of following u/s parts of Table Centre with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site and all directed by Engr-In-Charge. (FD-235, 274, 393). 76 S&F new top of 18mm thickMDFboard of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed. Make-Century/Greenply/Action Tesa 77 Legs 78 Long rails 79 Short rails 80 Wooden battens 81 Rubber shoes 82 Tightening of completeTable Centre by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 83 M&Loneor more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 84 Replacement of following U/S parts of Table Dining4 Person (1200x900x760mm) with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site directed by Engr-In-Charge. ( FD/MAP/II/03) 85 S&F new top of 18mm thick prelaminated MDF Board of exterior grade including 0.8mm thick PVC edge beading with auto-lipped through-feed. Make-Century/Greenply/Action Tesa . 86 Legs 87 Long rail 88 Short rail 89 Buffers 90 Tightening of complete Table Dining by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 91 M&Loneor more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 92 Replacement of following U/S parts of Table Dining 6 Person with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site and directed by Engr-In-Charge. (FD 239, 273& FD/MAP/II/03) 93 S&F new top of 18mm thick prelaminated MDF Board of exterior grade including 0.8mm thick PVC edge beading with auto-lipped through-feed. Make-Century/Greenply/Action Tesa . 94 Legs 95 Long rail 96 Short rail 97 Buffers 98 Tightening of complete Table Dining 6 person by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 99 M&Loneor more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 100 Replacement of following U/S parts of Table Dining 8 Person with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgand directed by Engr-In-Charge.(FD-30, 239, 273) 101 S&F new top of 18mm thick prelaminated MDF Board of exterior grade including 0.8mm thick PVC edge beading with auto-lipped through-feed. Make-Century/Greenply/Action Tesa . 102 Legs 103 Long rail 104 Short rail 105 Buffers 106 Tightening of complete Table Dining 8 pers by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 107 M&Loneor more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 108 Replacement of following U/S parts of Table Dressing Ladies with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site and directed by Engr-In-Charge.(FD- 251, 378) 109 S&F drawer of preleminated MDF board 18mm thick exterior grade duly fixed with 0.8mm thick PVC beading as per drg and as directed by Engr-in-Charge. Make-Century/Greenply/Action Tesa 110 S&F suitable new acrylic knob as approved by GE. 111 S&F frame of first class hard wood (Teak) including 6mm thick ply woodfor back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge 112 S&Fsuitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x366x5mm thick as approved by GE. Make-Saint Gobin/Modi Guard 113 S&F suitable new table top/bottom of prelaminated MDF boardof 18mm thick one side teak finish and other side white with 4mm thick half round teak wood beading 114 S&F suitable new side plank of prelaminated MDF boardof 18mm thick with 4mm thick half round teak wood beading 115 S&F suitable size new leg of 1st class hard wood teak as per drg and as directed by Engr-in-Charge. 116 S&F suitable new plain sliding glass as per drg and as directed by Engr-in-Charg. 117 Tightening of complete Table Dressing Ladies by suitable size screw &nails as directed by Engr-in-Charge at site. 118 M&Loneor more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 119 Replacement of following U/S parts of Table Dressing (ladies) with Stool with suitable new parts of existing shape & size complete to match the original as shown on drgat site and directed by Engr-In-Charge. (FD/MAP-II/07) 120 S&Fsuitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x380x5mm thick as approved by GE.Make- Saint Gobin/Modi Guard 121 S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick ply wood with 4mm thick 0.8mm PVC edge beading as per drg & directed. 122 S&F suitable new 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge 123 S&F suitable newtop of table dressing ladies (box) ofprelaminated MDF boardof 18 mm thick with 4mm thick half roundteak wood beading. 124 S&F suitable newside planks of table dressing (box) ofprelaminatedMDF boardof 18mm thickwith 4mm thick half roundteak wood beading. 125 S&F suitable newdoor plank of table dressing (box) ofprelaminatedMDF boardof 18mm thick with 4mm thick half roundteak wood beading. 126 S&F suitable new bottom (box) of 12mm thick plywood as shown on drg. 127 S&F suitable new stainless steel piano hinges and one nos magnetic catcher as shown on drg. 128 S&F of new heavy duty mild steel telecscopic channel for smooth functioning of drawer as approved by GE. Make-Ebco/Hettitch/Klazovyn 129 S&F suitable new 50 mm long D shaped stainless steel handle as approved by GE. 130 S&F suitable new 75 mm long D shaped stainless steel handle as approved by GE. 131 S&F new cushion foam of 75mm thick and 40 density for seat of stool dressing (box) as shown on drg. 132 S&F new leatherite cloth for seat of stool dressing (box) as shown on drg as approved by GE. 133 S&F suitable newheavy duty revolving nylon double wheels for stool dressing (box) as shown on drg. 134 Replacement of following U/S parts of Table Writing FD with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg at siteand directed by Engr-In-Charge. (FD-33, 249, 275) 135 S&F new top of 18mm thickMDFboard of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed. Make-Century/Greenply/Action Tesa 136 Leg (35x35x760mm) 137 Long rails 138 Short rails 139 S&F of new sides of box made of 18mm thick Pre laminated MDF board as per drg and directed by Engr-In-Charge. 140 S&F of new door made of 18mm thick Pre laminated MDF board fixed with suitable piano type hinges alongwith 04mm thick teak wood beading as directed by Engr-In-Charge. 141 S&F of new self of 18mm thick Pre laminated MDF board as per drg and directed by Engr-In-Charge. Make-Century/Greenply/Action Tesa 142 S&F of new central leg (150 to 200mm long) of teak wood as per directed by Engr-In-Charge. 143 S&F suitable new knobs / handle of approved quality. 144 Buffers 145 S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed. 146 S&F of newback ply of 6mm thick as per drg and as directed by Engr-In-Charge. 147 Tightening of complete Table Writing by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 148 M&Loneor more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 149 Replacement of following U/S parts of Teapoy with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site and directed by Engr-In-Charge. (FD-232, 278, 382) 150 S&F new top of 18mm thickMDFboard of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed. Make-Century/Greenply/Action Tesa 151 Legs 152 Long rails 153 Short rails 154 Stiffeners 155 Buffers 156 Tightening of complete Teapoy by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 157 M&Loneor more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 158 Replacement of following unserviceable parts of Side board with suitable new parts of existing shape & size complete to match the original as shown on drgat site and all directed by Engr-In-Charge. (FD-26(M), 241, 391, 1112) 159 S&Fnew shelves made out of 18mm thick prelaminated MDF board exterior grade including PVC beading .. 160 S&F new top of side board made out of 18mm thick prelaminated MDF board exterior grade with PVC beading. 161 S&Fnew doors made out of 18mm thick prelaminated MDF board with PVC beading, fixed with piano hinges. 162 S&F new 100 mm longhandleas per approved by GE. 163 S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick 0.8mm PVC edge beading as per drg & directed. 164 S&F new base made out of 18 mm thick prelaminated MDF board. 165 S&F new sides made out of 18 mm thick prelaminated MDF board. 166 S&F new back made out of 18 mm thick prelaminated MDF board. 167 Tightening of complete side board by suitable size nails & screw as directed by Engr-in-Charge on site. 168 Replacement of following U/S parts of Sofa Set 4/5 Seater with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site including re cushioning of sofa set 02,03,04 & 05 and directed by Engr-In-Charge. (FD-258, 281, 373) 169 Front/Rear legs 170 Side rails 171 Front/rear side long rails 172 Arm/Handles 173 Wooden battens 174 Buffers 175 Tightening of complete Sofa Set 4/5 Seater by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 176 For 4 Seater M&Loneor more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 177 For 5 Seater M&Loneor more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 178 Re-Cushioning of sofa set 02,03,04 & 05 seater :(FD-258, FD-281, FD-373) 179 S&F suitable size new cloth cover with YKK chain for sofa cushion size 22”x21”x4” of superior quality tapestry cloth including markin as approved by GE, not less than Rs. 450/-per meter. 180 S&F new cushion foam 100mm thick and 40density, size 22”x21”x4” of superior quality as approved by GE.Make-Sleepwell / Kurl-on/Godrej 181 Replacement of following U/S parts of Table 3x2with & without drawer with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site and directed by Engr-In-Charge. (FD-283, 284) 182 S&F new top of 18mm thickMDFboard of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed. Make-Century/Greenply/Action Tesa 183 Legs (30x60x760mm) 184 Long rail 185 Short rail 186 Stiffeners 187 S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed. 188 Rubber shoes 189 Tightening of complete Table 3x2by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 190 M&Loneor more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 191 Replacement of following U/S parts of Table Dressing Gents with suitable size new parts of existing shape & size complete to match the original as per drg no FD-230, 379 at site and directed by Engr-In-Charge. 192 S&F new top of 12mm thick prelaminated MDF board of exterior gradewith 4mm thick half round beading. 193 S&F new bottom of12mm thick commercial ply with 4mm thick half round beading. 194 S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed. 195 S&F of knob acrylicof approved quality 196 S&F of looking mirror of first class quality size 760x380x5mm thick as per drg and directed by Engr-in-Charge. Make-Saint Gobin/Modi Guard. 197 S&F new6mm thick plyfor back side of mirror with hanging clip and iron frame as directed by Engr-in-Charge 198 Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site. 199 M&Lfor two or more coats french polishing with high class finishing as directed by Engr-in- charge. 200 Replacement of following unserviceable parts of Bin Soiled Multipurpose with suitable new parts of existing shape & size complete to match the original as shown on drgat site and all directed by Engr-In-Charge. FD-244 & FD/E6/MAP/09. 201 S&Fnew shelves made out of 18mm thick prelaminated MDF board exterior grade including PVC beading .. 202 S&F new top of Bin Soiled multipurposemade out of 18mm thick prelaminated MDF board exterior grade with PVC beading. 203 S&Fnew doors made out of 18mm thick prelaminated MDF board with PVC beading, fixed with piano hinges. 204 S&F new 100 mm longhandleas per approved by GE. 205 S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick 0.8mm PVC edge beading as per drg & directed. 206 S&F new base made out of 18 mm thick prelaminated MDF board. 207 S&F new sides made out of 18 mm thick prelaminated MDF board. 208 S&F new back made out of 18 mm thick prelaminated MDF board. 209 Tightening of complete Bin Soiled multipurpose by suitable size nails & screw as directed by Engr-in-Charge on site. 210 Replacement of following U/S parts of Table 900x900x760mmwith suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg at site and directed by Engr-In-Charge. (FD-291) 211 S&F new top of 18mm thick prelaminated MDF Board of exterior grade including 0.8mm thick PVC edge beading with auto-lipped through-feed. Make-Century/Greenply/Action Tesa . 212 Legs 213 Long rail 214 Short rail 215 Rubber shoes 216 Tightening of complete Table by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site. 217 M&Loneor more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 218 Replacement of following U/S parts of Form without Back 1900mm Wooden Topwith suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drgat site and directed by Engr-In-Charge. (FD-1027(MR)/FD-77M) 219 S&F newTop of Hard Wood Teak asper existing shape and size shown ondrg as directed by Engr-in- charge/BSO 220 M&Loneor more coat frenchpolish on wooden parts and paint on iron surface of approved shade and quality and one coat of french polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. 221 Re canning of (Chair Dining FD-228/279, Chair Easy FD-229, and Chair Writing FD-202,250 & 280) shall be done with plastic cane 2mm wide and half roundfor seat and back and 3mm wide for border in white colour 0.4mm thick in true godrej patten all as shown on drawingand directed by Engr-in-Charge/BSO at site.Make-Premium/Shah Note :- Repair/Maint works will be executed where the furniture exist in different user units/site under AOR ofGE (A) No 2 Jodhpur as directed by Engr-in-Charge/BSO.
