Tender For Provision Of Certain Revenue Works In Awantipur Garrison Under Ge 861 Ews; 1 Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge. 2 Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge. 3 M&L for PCC type D2 (1:4:8) (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge. 4 M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed by Engineer-in-Charge. 5 M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces of wall with cement mortar (1:6) surface should be even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. 6 M&L for cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in coping complete all as specified and directed by Engineer-in-Charge. 7 M&L for Cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed by Engineer-in-Charge. 8 M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement,including forms, moulds, mitred/stopped ends etc. complete all as specified and directed by Engineer-in-Charge. 9 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft / loose soil complete all as specified and directed by Engineer-in-Charge. 10 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge. 11 M&L for pre-cast cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in cover slabs for drain set in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. 12 M&L for Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. 13 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge. 14 M&L for hard core of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge. 15 M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and grey cement and no pigment over and including 15mm thick screed bed of cement concrete (1:4) complete all as specified and directed by Engineer-in-Charge. 16 Demolition of reinforced cement Concrete in ground floors and pavings n exc 15 cm thicknesscomplete all as specified and directed by Engineer-in-Charge. 17 Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer-in-Charge 18 Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer-in-Charge 19 M&L for 50mm thick cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed by Engineer-in-Charge. 20 M&L for light coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. 21 M&L for coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces like dado and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering of cement mortar (1:4)complete all as specified and directed by Engineer-in-Charge. 22 S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and as directed by Engineer-in-Charge. 23 S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and directed by Engineer-in-Charge. 24 S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed by Engineer-in-Charge. 25 S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. 26 S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge. 27 S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge. 28 M&L for Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 6 & n exc 13 Sq cm complete all as specified and as directed by Engineer-in-Charge. 29 M&L for Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 3 & n exc 6 Sq cm complete all as specified and as directed by Engineer-in-Charge. 30 M&L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and as directed by Engineer-in-Charge. 31 Supplied & fixed 20mm, 2nd class hard wooden boarding, in ceiling with nails in any situation (except flooring and skirting) Planed one side and edges tongued and grooved or rebated complete all as specified and as directed by Engineer-in-Charge. complete all as specified and as directed by Engineer-in-Charge. 32 M&L for 10mm thick rendering on fair faces or other than fair faces of brick or concrete surfaces of newly constructed wall built in cement mortar (1:6) surface should be even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge. 33 M&L including preparation of newly plastered surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by Engineer-in-Charge. 34 M&L including preparation of newly plastered surfaces and Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth Distempering Two or more coats on new work with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete as per manufacturers specification complete all as specified and directed by Engineer-in-Charge. 35 M&L for Solid PVC Wall Lining and ceiling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed by Engineer-in-Charge. 36 M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engineer-in-Charge. 37 S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed by Engineer-in-Charge. 38 S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern including all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and as directed by Engineer-in-Charge. 39 S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including brackets and including pedestal complete all as specified and as directed by Engineer-in-Charge. 40 S&F in repairs looking mirror size 1200x900mm without frame with 04 nos of stainless steel studs fixed in wall complete all as specified and as directed by Engineer-in-Charge. 41 S&F in repairs 15mm dia fancy type chromium plated bib taps complete all as specified and as directed by Engineer-in-Charge. 42 S&F in repairs 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge. 43 S&F in repairs 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. 44 Dismantling water tanks 1000 ltrs capacity and removing from site complete all as specified and as directed by Engineer-in-Charge. 45 S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed by Engineer-in-Charge. 46 S&F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. 47 S&F in repairs 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed by Engineer-in-Charge. 48 Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge. 49 Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge. 50 M&L for Brickwork with‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. 51 M&L for 100mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base of floor finished complete all as specified and directed by Engineer-in-Charge. 52 M&L for 75mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed by Engineer-in-Charge. 53 M&L for coloured Non - skid Ceramic tiles joint free 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. 54 M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; all as specified and as directed by Engineer-in-Charge. 55 S&F Wire netting of galvanised steel wire 1.40mm dia (size of mesh 12mm) fixed with tinned tacks or wire staples complete all as specified and directed by Engineer-in-Charge. 56 S&F 35mm thick 2nd class hardwood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. 57 S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engineer-in-Charge. 58 S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge. 59 S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge. 60 M&L including preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge. 61 M&L including preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge. 62 S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)three layer, hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed by Engineer-in-Charge. 63 S&F 15mm bore Tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors compete all as specified and as directed by Engineer-in-Charge. 64 S&F 20mm bore Tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors compete all as specified and as directed by Engineer-in-Charge. 65 S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engineer-in-charge. 66 S&F 15mm dia Bib taps, cast copper alloy, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engineer-in-charge. 67 S&F Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including brackets and pedestal and 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins,complete all as specified and as directed by Engineer-in-charge. 68 S&F 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy chromium plated complete all as specified and as directed by Engineer-in-charge. 69 M&L for 2nd class hardwood Plain fillets, exc 13 sqcm and n exc 25 sqcm in square, rectangular or triangular in section,clean sawn, secured with nails or brads complete all as specified and directed by Engineer-in-Charge. 70 S&F 15mm thick, 2nd class hardwood Boarding, with nails in any situation (except flooring and skirting) Planed one side and edges tongued and grooved or rebated in wall panelling complete all as specified and directed by Engineer-in-Charge. 71 S&F 15mm thick, 2nd class hardwood Boarding, with nails in any situation (except flooring and skirting) Planed one side and edges tongued and grooved or rebated in false ceiling complete all as specified and directed by Engineer-in-Charge. 72 M&L for 2nd class hardwood Plain fillets, exc 06 sqcm and n exc 13 sqcm in square, rectangular or triangular in section,clean sawn, secured with nails or brads complete all as specified and directed by Engineer-in-Charge. 73 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles from siteand rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. 74 Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m eachcomplete all as specified and directed. 75 Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but n exc 4.0 sqm each complete all as specified and directed by Engineer-in-Charge. 76 Dismantling reinforced cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge. 77 Dismantling Asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and as directed by Engineer-in-Charge. 78 Dismantling timber scantlings (unframed) in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed by Engineer-in-Charge. 79 M&L for coloured Non - skid, joint free Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding of cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. 80 M&L for coloured Glazed ceramic tiles in vertical surfaces 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed bed or cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. 81 M&L for reinforced cement concrete (nominal mix) Type B1 (1:2:4) (using 20mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge. 82 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-Charge. 83 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all asspecified and as directed by Engineer-in-Charge. 84 S&F 2nd class hardwood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed by Engineer-in-Charge. 85 S&F 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge. 86 S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed by Engineer-in-Charge. 87 S&F 150 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-Charge. 88 Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed by Engineer-in-Charge. 89 M&L for Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. 90 M&L including preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. 91 S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 680 x 470 mm white, with integral foot restsexcluding flushing cistern and flush pipe) complete all as specified and as directed by Engineer-in-Charge. 92 S&F in repairs 10 litres capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flush pipe etc. complete all as specified and as directed by Engineer-in-Charge. 93 S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed by Engineer-in-Charge. 94 S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in-Charge. 95 S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and as directed by Engineer-in-Charge. 96 S&F in repairs 110mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge. 97 S&F in repairs 110mm dia PVC (SWR) P’ trap complete all as specified and as directed by Engineer-in-Charge. 98 S&F in repairs 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed by Engineer-in-Charge. 99 M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge. 100 Demolition of cement Concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-Charge. 101 M&L for 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in plinth protection surface finished even and smooth (without using extra cement) complete all as specified and as directed by Engineer-in-Charge. 102 M&L including preparation of newly plastered surface of wall and applying three coats of white wash over a coat of chalk white primer complete all as specified and as directed by Engineer-in-Charge. 103 M&L including preparation of old decorated plastered surface of wall with complete removal of existing treatment and applying three coats of white wash over a coat of chalk whitening complete all as specified and as directed by Engineer-in-Charge. 104 M&L including preparation of old decorated plastered surface of wall with complete removal of existing treatment and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge. 105 Demolition of Brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge. 106 M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) finishing thesurface even and smooth without using extra cement completeall as specified and as directed by Engineer-in-Charge. 107 M&L for reinforced cement concrete, Design Mix (M-25) (Using 20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engineer-in-Charge. 108 M&L for reinforcement cement concrete, Design Mix (M-25) (Using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed by Engineer-in-Charge. 109 S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde- E- 250) quality- A complete all as specified and as directed by Engineer-in-Charge. 110 M&L including preparation of new steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromium primer complete all as specified and as directed by Engineer-in-Charge. 111 M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter flat rough finished surface complete all as specified and as directed by Engineer-in-Charge. 112 M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygon rough finished surface complete all as specified and as directed by Engineer-in-Charge. 113 M&L for pre-cast reinforced cement concrete (1:2:4) Type B1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge. 114 S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. 115 S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. 116 M&L for Providing precast cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in louvres and jallies, 25mm thick (measured solid), including all mouldings set in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. 117 M&L for Providing pre-cast cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate ) as inposts, boundary pillars, bed plates, pintle blocks, anchorage blocks,with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) complete with joints to match all as specified and as directed by Engineer-in-Charge. 118 M&L for cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed by Engineer-in-Charge. 119 M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) over and including 10mm thick cementmortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge. 120 M&L for reinforced cement concrete (Design Mix) M-25 (Using 20mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-In-Charge. NOTE : (Reinforcement steel shall be measured and paid separately under respective items) 121 M&L for reinforced cement concrete (Design Mix) M-25 (Using 20mm graded crushed stone aggregate) as in Chajjas complete all as specified and directed by Engineer-In-Charge. NOTE : (Reinforcement steel shall be measured and paid separately under respective items) 122 M&L forFormwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. square, rectangular or polygon rough finished surface of concrete complete all as specified and directed by Engineer-In-Charge. 123 M&L forFormwork to chullah hoods, chajjas, troughs and similar items including edges flat rough finished surface of concrete complete all as specified and directed by Engineer-In-Charge. 124 M&L for 100mm thick plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in sub base of floor finish completeall as specified and as directed by Engineer-in-Charge. 125 S&F mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats Fe 410W(gde-E-250) Quality B complete all as specified and directed by Engineer-In-Charge. 126 S&F mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-Charge. 127 S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed by engineer-in-charge. 128 S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifiedand directed by engineer-in-charge. 129 S&F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed by Engineer-in-Charge. 130 M&L 100mm thick cement concrete type B2 1:2:4 (using 40mm graded crushed stone aggregate) as in subbase of floor finished complete all as specified and directed by Engineer-in-Charge. 131 M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.Note: Consolidated thickness shall be measured and paid. 132 M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping mediumgrade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ woodensunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with theexisting specification complete all as specified anddirected by Engineer-in-Charge. 133 All as per srl item No-132 here in above but for One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified anddirected by Engineer-in-Charge. 134 All as per srl item No-132 here in above but for One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size complete all as specified anddirected by Engineer-in-Charge. 135 All as per srl item No-132 here in above but for One 3 pin socket outlet, 15 Amps,on independent board, with cables 4 sq. mm size complete all as specified anddirected by Engineer-in-Charge. 136 S & F Modular Switch one way6 A, 1 module complete all as specified anddirected by Engineer-in-Charge. 137 S & F Modular Switch one way16 A, 1 module complete all as specified anddirected by Engineer-in-Charge. 138 S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified anddirected by Engineer-in-Charge. 139 S & F Modular Socket, 6A,16A - 2/3 pin combined 2 module complete all as specified anddirected by Engineer-in-Charge. 140 S & F in repair Modularwhite cover plate with frame, 3 module complete all as specified anddirected by Engineer-in-Charge. 141 S & F in repair Modularwhite cover plate with frame, 4 module complete all as specified anddirected by Engineer-in-Charge. 142 S & F in repair Modularwhite cover plate with frame, 6 module complete all as specified anddirected by Engineer-in-Charge. 143 S & F in repairModularwhite cover plate with frame, 8 module complete all as specified anddirected by Engineer-in-Charge. 144 Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified anddirected by Engineer-in-Charge. 145 Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified anddirected by Engineer-in-Charge. 146 Supply and fixing LED lamp 9 W complete all as specified anddirected by Engineer-in-Charge. 147 Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified anddirected by Engineer-in-Charge. 148 Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified anddirected by Engineer-in-Charge. 149 S&F decorative ultra slim linear LED 20 Watt 4 long lighting fixture with extruded aluminium heat sink, environment friendly, energy efficient ready to usepack includingLED tubecompletewith inbuilt electronic driver, PCB, connector block etc. including connecting up threecopper flexible cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete all as specified anddirected by Engineer-in-Charge. 150 Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified anddirected by Engineer-in-Charge. 151 Supply and fixing MCB, SP, AC, 240 volts B series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified anddirected by Engineer-in-Charge. 152 Supply & fixing MCB, SPN (single pole neutral), AC, 240 volts, B series capacity32 Amps10kA and making connections complete all as specified anddirected by Engineer-in-Charge. 153 Supply and Fixing exhaust fan 300 mm sweep PVC body with louver, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified anddirected by Engineer-in-Charge. 154 Supply and Fixing Fan step regulator, 120W - 2 module type electronic fan regulator, duly ISI marked with and including connector complete all as specified anddirected by Engineer-in-Charge. 155 Supply & Fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified anddirected by Engineer-in-Charge. 156 Supply and fixing wall fan 450mm high speed, 230 volts single phase with jerk free oscillation, smooth running, three blades, pull cords including fixing arrangementcomplete all as specified anddirected by Engineer-in-Charge. 157 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified anddirected by Engineer-in-Charge. 158 Supplying and fixing 1100volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension GI wire, one twin core cable flat or circular 10 sq mm complete all as specified anddirected by Engineer-in-Charge. 159 Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completioncomplete all as specified anddirected by Engineer-in-Charge. 160 Supply and fixing LED Recessed narrow luminaire (20w range) with efficient optics ensuring perfectly uniform illumination, optimised and unparalleled light distribution complete all as specified anddirected by Engineer-in-Charge. 161 S&F MCCB 4 Pole 63Amps, AC 415 V, 16kA complete all as specified anddirected by Engineer-in-Charge. 162 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified anddirected by Engineer-in-Charge. 163 M & L for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Casing and capping with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core, one run of PVC casing and capping shall be measured as single run) complete all as specified anddirected by Engineer-in-Charge. 164 S&F inswitch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified anddirected by Engineer-in-Charge. 165 S&F in Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt complete all as specified anddirected by Engineer-in-Charge. 166 S&F in Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal 240 volt complete all as specified anddirected by Engineer-in-Charge. 167 S&F in repairs stepped type electronic fan regulator Modular flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified & directed. 168 Supply & fixing MCB, SPN (Single Pole Neutral), AC, 240 volts, B series capacity 40 Amps to 63 Amps10kA and making connections complete all as specified anddirected by Engineer-in-Charge. 169 Supply and fixing in repairs ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified anddirected by Engineer-in-Charge.
