|
| 1 | Supply and Erection of Poles |
| 2 | Supply of Poles & accessories: Supply of poles: 8 mtr long (ST 410 SP 15 Poles) |
| 3 | Suspension or tension clamp hook/dead end hook |
| 4 | Straight through cable jointing kit |
| 5 | Galvanized Nuts & Bolts |
| 6 | Painting of Poles |
| 7 | Red Oxide |
| 8 | Aluminium Paint |
| 9 | Earthing complete by G.I pipe 40 mm or G.I rod 20 mm 2.5 mtr. long through G.I. strip |
| 10 | Cement bottoming of poles 1:2:4 mix as per REC standards 1.45 cum/pole |
| 11 | Insulating piercing connectors |
| 12 | PG clamps |
| 13 | Erection of Poles |
| 14 | Erection of poles: 8 mtr long (ST 410 SP 15 Poles) |
| 15 | Laying of Suspension or tension clamp hook/dead end hook |
| 16 | Laying of Straight through cable jointing kit |
| 17 | Fixing of Galvanized Nuts & Bolts |
| 18 | Painting of Poles |
| 19 | Red Oxide |
| 20 | Aluminium Paint |
| 21 | Erection/laying of earthing work (Earthing complete by G.I pipe 40 mm or G.I rod 20 mm 2.5 mtr. long through G.I. strip) |
| 22 | Laying of Cement bottoming of poles 1:2:4 mix as per REC standards 1.45 cum/pole |
| 23 | Fixing of Insulating piercing connectors |
| 24 | Fixing of PG clamps |
| 25 | Supply of cables and accessoriesCost of Cable |
| 26 | Supplying and making termination with brass compression gland and aluminium lugs for 3x16+1x25 mm sq. aluminium conductor cable of 1.1 kV grade |
| 27 | Pot end type insulating cable terminator |
| 28 | Cost of 3 core 1.5 sq mm PVC wire |
| 29 | Laying of cable: Laying of overhead outdoor AB cable |
| 30 | Supply & Fixing of LED street Light |
| 31 | Supply and fixing of street light 100 wattProviding & Fixing of IK07 IP66 protected LED street Light Luminaries on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminium LM6/ADC12 material with heat dissipation housing with UV stabilized PC/toughened glass cover (UV stabilization report submitted for UV cover) and secondary lens on each LED & should be SMD type. The system level luminaire efficiency >=120 lm/wt with High power LEDs is to be used and potted drive must be potted & has a unique BISR number with input voltage AC120 to 270VAC with high voltage cutoff@>300 VAC and auto resetting safety, input frequency 50 Hz+/- 3% power factor>0.95 drive efficiency>85%, THD(1)<10% humidity 10% to 90% RH working temp – 5C o 45C, drive current<100mA shown in LM79 report. The luminaire shall be BIS certified and T.C certified Life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintained, colour rendering index >70 and CCT5700K +/- 355K. Surge protection shall be min>/= 4kV internal and min 10kV external. |
| 32 | Erection of Street Light |
| 33 | Supply & fixing of single bracket for mounting of LED street light |
| 34 | Supplying & fixing of looping cable box- made of 1.6 MM MS steel sheet with 2 nos. 25mm x 5mm MS complete with bolts & nuts etc. as required for fastening looping cable box – with pole including providing holes for cable entry & exit through 2 nos. glands & comprising din channel inside for fixing 2 pole MCB and 1x3 way strip with aluminium paint as required (minimum) size – 175mm x 150 mm x 100mm |
| 35 | Installation and connection of LED street light through poles from looping box to light fittings as required but excluding cost of wire. |
| 36 | Supply & fixing of 6A rating, 240/415 v, 10kA “C” curve miniature circuit breaker suitable for inductive load on following poles in the existing MCB-DB complete with connection, testing & commissioning etc. as required. Single pole and neutral (6A) |
| 37 | L.T.OUTDOOR PANELDesign, fabrication, supplying & installation of dust, damp and vermin proof free floor standing L.T.OUTDOOR PANEL confirming to IP Rating (min) with locking arrangement made out of 16/14 SWG sheet steel, duly painted with powder coated, suitable for 440 v 50 Hz 3 phase 4 wire system complete with cable interconnection, complete with earth bus and aluminium bus bar, numbering & sign writing, interconnection comprising of following accessories including but not limited to:Indicating Lamp: RYB1 NO. 160 AMPERE MCCB, TPN (For incoming cable)1 SET TPN ALUMINIUM BUS BAR 63 AMPERE (4 WAY)1 NO. PHOTOCELL (For automatic dusk-to-dawn operation)1 NO. DIGITAL TIMER (To schedule on/off timings)1 NO. CONTACTOR1 NO. 32 AMPERE TPN MCB1 NO. AUTO/MANUAL SWITCHSIZE: 900mm x 600mm x 300mm |
| 38 | Earthing of Panel |
