}

Tender For Pond Rejuvenation In Village Alipura Yea Wc-06 - Cleaning Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1M Aboveground Level And Removal Of Rubbish Up To Distan, Gautam Buddha Nagar-Uttar Pradesh

Yamuna Expressway Industrial Development Authority has published Tender For Pond Rejuvenation In Village Alipura Yea Wc-06 - Cleaning Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1M Aboveground Level And Removal Of Rubbish Up To Distan. Submission Date for this Tender is 21-08-2025. Lake Development Tenders in Gautam Buddha Nagar Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

50638707
Tender For Pond Rejuvenation In Village Alipura Yea Wc-06 - Cleaning Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1M Aboveground Level And Removal Of Rubbish Up To Distan
Tender
Indian
Uttar Pradesh
Gautam Buddha Nagar
21-08-2025

Tender Details

Tender For Pond Rejuvenation In Village Alipura Yea Wc-06 - Cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m aboveground level and removal of rubbish up to distance of 50m out side the periphery of the area cleared 2 Pumping out water by Diesel pump of discharge capacity of4000 lts per hour including fuel operator , suction & delivery pipes of size 4 X 4 length 150 as per direction of Engineer in Charge 3 Item code morth 301Excavtion in soil usinghydraulics excavator and tippers with disposal upto 1000 metersExcavation for road workin soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopesin accordance withrequiremements of lines , grades and cross section and transportation to the embankment locationwithin all lifts and lead upto 1000 meters 4 Add extra for sludge/mud/liquid 50% of Excavated earth 25% of H.No.3 UP PWD 5 Providing and laying in position cement concrete with 4 cm gauge approved stone ballast c sand and cement in pro of 8:4:1 including supply of all material labour tools and plants etc req for proper comp of work 6 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note:- Cement content considered in this item is @330 kg/cum.Excess/less cement used as per design mix is payable/recoverableAll work up to Plinth level. UPPWD/SOR/DAR/5.33.1 7 Rinforcement for R.C.C. work including straightening. Cutting Bending placing in position and bending all complete upto plinth level using Hot rolled Deformed bars. (UPPWD/SOR2020/5.22.3) 8 Centering & Shuttering including strutting. propping etc and removal of form work for.Foundation footing bases of column etc. (UPPWD/SOR-2020/5.9.1) 9 Suspended Floors, roofs, landings, balconies, and access floors. (UPPWD/SOR-2020/5.9.3) 10 Edges of slab and breaks in floor and walls under 20cm wide. (DAR/5.9.16.1/ Based on UPPWD/SOR-2020) 11 Laying non-pressure NP2 class R.C.C Pipe jointed with stiff mixture of cement mortar in the proportion of 1:2(1cement: 2 coarse sand) including testing of joints etc, 250mm UP PWD SOR-2020/DAR-18/ NP2 pipe 12 Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 8:4:1 including supply of all material labour tools and plants etc required for proper completion of the work 13 M-150 brick work in 1:6 cement & fine sand 1.25f.M mortar in foundation and plinth including supply of all materials labour complection of the work compiation of work (1:4:8) 14 Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 4:2:1 including supply of all material labour tools and plants etc required for proper completion of the work. Same as above item no.279 but with 2cm gauge stone grit in stend of 4cm gauge stone lallast. UP PWD SOR-2020/DAR-18/279a 15 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DAR/10.25.2/Based on UPPWD/SOR-2020)) 16 Supplying and stacking at site 53mm to 22.4mm siza stone aggregate 17 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 18 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). 19 12mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand)

Key Value

Document Fees
INR 983 /-
EMD
INR 78450.0 /-
Tender Value
INR 39.20 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail