}

Tender For Annual Plan-2025-26-S0132/26 Maneed P H C Yard Tile Re Laying Works, Maneed Gp-General Civil Work - Hospitalmaintenance 2 50.6.2.1:Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 30X20x15 Cm Or Nearest Available Size Co, Ernakulam-Kerala

Local Self Government Department has published Tender For Annual Plan-2025-26-S0132/26 Maneed P H C Yard Tile Re Laying Works, Maneed Gp-General Civil Work - Hospitalmaintenance 2 50.6.2.1:Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 30X20x15 Cm Or Nearest Available Size Co. Submission Date for this Tender is 22-08-2025. Paver Blocking Tenders in Ernakulam Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

50666625
Tender For Annual Plan-2025-26-S0132/26 Maneed P H C Yard Tile Re Laying Works, Maneed Gp-General Civil Work - Hospitalmaintenance 2 50.6.2.1:Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 30X20x15 Cm Or Nearest Available Size Co
Tender
Indian
Kerala
Ernakulam
22-08-2025

Tender Details

Tender For Annual Plan-2025-26-S0132/26 Maneed P H C Yard Tile Re Laying Works, Maneed Gp-General Civil Work - HOSPITALMAINTENANCE 2 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete 3 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 4 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 5 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15°landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III)derived from natural sources: 3 graded stone aggregate 20 mm nominal sizederived from natural sources). 6 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 7 50.6.3.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete 8 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 9 50.2.25.1:Filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge 10 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 11 13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) 12 OD213558/2025-2026:Dismantling and Relaying of DEPARTMENTAL precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall (51.20) be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 13 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work 14 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 15 OD215402/2025-2026:Taking out and Relaying 50 mm thick DEPARTMENTAL Bangalore stone with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone aggregate, pointing the gap with cement mortar etc. all complete as per the direction of Engineer in charge 16 OD215447/2025-2026:Supplying and fixing approved quality Scrolling type PVC Curtain (Blinds) including fitting in aluminum section and moving arrangements etc. complete. 17 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Key Value

Document Fees
INR 555 /-
EMD
INR 5296.0 /-
Tender Value
INR 2.11 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail