Tender For Supplying Of Transport Equipment And Providing Furniture For Tamil Nadu State Transport Corporation At Villupuram Region Transport Office In Kuthambakkam Bus Terminus- 1 Supplying of Office Table L1200 x W600 x H750mm 25mm thk.Table Top E/B L1200mm X W 600mm - 1Nos 25mm thk. Vertical Leg E/B 960mm X 750mm - 2Nos 18mm thk. Modesty 1200mm X 750mm - 2Nos Side Storage unit Size : L330 x D600 x H750 mm Mobile Pedestal (2 Drawer). Table Tops and legs made out of 25mm and 18mm thick Waterproof Plywood, all exposed edges are Machine pressed Edge banding finish. 2 Draw mobile pedestals of size 330mm W x 450mm D x 680mm H completely made of 18mm Waterproof Plywood finished with 2mm thick PVC machine pressed edge banding. Mobile unit to have central locking system with wheels.The rate includes cost of all materials, handles, lock, wheels, labour charges, transportation charges etc., The materials to be used shall be got approved by the Executive Engineer concerned before use on work,etc., complete as per standard specification. . 2 Supplying of Office Table L1200 x W600 x H750mm 25mm thk.Table Top E/B L1200mm X W 600mm - 1Nos 25mm thk. Vertical Leg E/B 960mm X 750mm - 2Nos 18mm thk. Modesty 1200mm X 750mm - 2Nos Side Storage unit Size : L330 x D600 x H750 mm Mobile Pedestal (2 Drawer). Table Tops and legs made out of 25mm and 18mm thick Waterproof Plywood, all exposed edges are Machine pressed Edge banding finish. 2 Draw mobile pedestals of size 330mm W x 450mm D x 680mm H completely made of 18mm Waterproof Plywood finished with 2mm thick PVC machine pressed edge banding. Mobile unit to have central locking system with wheels.The rate includes cost of all materials, handles, lock, wheels, labour charges, transportation charges etc., The materials to be used shall be got approved by the Executive Engineer concerned before use on work,etc., complete as per standard specification. . 3 Providing and Supplyingchair withAdjustable Armrest,Upholstered Seat & Mesh Back,Gaslift for Seat height adjustment,Standard 5-prong Nylon Base. Rate including all materials, labour charges, necessary lead and lifts, transportation charges, loading, unloading, as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 4 Providing and Supplyingchair with Adjustable Armrest,Upholstered Seat & Mesh Back,Gaslift for Seat height adjustment,Standard 5-prong Nylon Base. Rate including all materials, labour charges, necessary lead and lifts, transportation charges, loading, unloading, as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 5 Supply, Installation,Testing and commissioning of desktop computer with intelcore, 11gen, i5 processor, windows-11, 1.8GHz speed, internal storage capacity , 8GB+8GB/512GB SSD, 1TB HDD, VGA and HDMI port with 27 full HD(1920 x 1080) LED monitor with HDMI and VGA ports, stand with riser and base, power cable, HDMI cable, key board, mouse, WiFi, Graphics card etc., with necessary accessories to complete the work. The rate includes the transportation and labour charges. 6 Supply,Installation,Testing and commissioning of Laserjet, Multi-function,WiFi Monochrome Laser Printer. Smooth connectivity with built-in fast Ethernet, Hi-Speed USB 2.0, Dual-sided scanning and uninterrupted printing and with necessary accessories to complete the work. The rate includes the transportation and labour charges. 7 Supplying thePrinter of Brand HP- M438 ModelMulti-Purpose with necessory cables and as directed by the department officers. 8 Supplying the Cash Counting Machine with a Brandof-TVS, and as directed by the departmental officers. 9 Fabricating and supplying Kiosk cabin of size 80x 80x 90 all verticle members and horizontal members are made up of100x50x2mm thick MS Tube, Bottom florring using MS chequared plate, and roof covered with double layer puffed sheet 50mm thickness. Rear side of cabin is fully closed with one openable door of size 26 x 7 and 2 sides 6 x 4opening withaluminium sliding glazed window with self lock and other one side provide rolloing shutter roof projection of all round 20 feet provisions. inner walls, outer walls and ceiling are to be covered with 3mm thick iron + ACP sheet. Floor with 12mm thickness of H.D.H.M.R board. Inside of cabin provision for cash counter, shelves, racks, fulls ceiling, atractive lights, conceeled wiring, work table, plug points switches and lock & keys and including provideing chair and table etc., complete. The rate includes cost of all material, transport to site, labour charges assembling and placing in postion where ever as instructed by departmental officer 10 Fabricating and Supplying of Medium Back S Type chair of size 470mm x 490mm using 1 MS tube for all horizontal and vertical members, the tube is bending ths shape of S and the seating size 470mm x 430mm outer frame using 2 square teak wood with PVC wire netted, the back rest of size 470mm x 380mm same as to seating specification and bottom of the S frame using PVC bush. The rate including cost of all materials, labour charges, necessary lead and lifts, transportation charges, loading, unloading, as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 11 Providing and Supplying of Steel Beru of size Length- 3.5 feet, breath- 1.6 feet and height of 6.5 feet with double door locking system with ss handle necessory painting color approved got by the deparmental officers etc., all complete. 12 Supplying and installing of the Steel rack for 18gauge ms sheet and makin the size of 4 X 7 with colour finalized by the enginering incharge and as directed by the departmental officers. 13 Supplying and installing of the Cup Board of size : 1.50m X 1.0m X 0.60m with necessory BWR Ply woods and finishing the laminated sunmica anddraws, clamps and hinges ans screwswith colour finalized by the enginering incharge and as directed by the departmental officers. 14 Providing and fixing modualr storage unit to a width of 450 mm and height as per detailed drawing but in general, it shall be made out of 18 mm thick BWR plywood on all sides including top, with intermediate shelves to accommodate box files with necessary teakwood supports and the openable shutter shall be made out of 18mm thick BWR plywood or glass shutter with frame as directed etc. complete.All exposed surfaces shall be finished with 1mm thick approved laminate ofapproved shadeand all inner / recessed surfaces shall have laminated with 1mm matching laminate. Rate to include all hardwares, auto closing cabinet heavy duty hinges, magnetic latch, SS handles - of approved make, including locking arrangements with master key of approved make etc. complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 15 Providing and fixing aluminium anodized Fully paneled partition in the size of 2.40m height. Partition made with aluminum tubular box section of 63x38mm fixed at vertical in every 90cm interval c/c withhorizontal member floor level bottom section of size 100x44mm Aluminium Section the remaining portion of horizintal member section of size 63x38mm will be fixed at every 90cm interval the panel portion fixed upto 90cm level, 90cm to 1.8m and above 1.8m levelfixed with 12 mm thick both side prelaminated cement particle board.The rate includes necessary aluminum glazing clip, L cleats and labour charges etc., complete 16 Providing and fixing aluminium anodized partly paneled and partly fixed with aluminium grill of standard pattern (Diamond Shape)in the size of 0.60mheight. Partition made with aluminum tubular box section of 63x38mm fixed at vertical in every 90cm interval c/c withhorizontal member floor level bottom section of size 100x44mm Aluminium Section the remaining portion of horizintal member section of size 63x38mm will be fixed at every 90cm interval.The panel portion fixed upto 90cm level and above 1.80m level to 2.65m fixed with 12mm thick both side prelaminated cement particle board of approved colour the middle portion of 90cm to 1.8m level fixed at 6mm thick aluminium grill of standard pattern (Diamond Shape) 17 Providing and fixing aluminum anodized panneled door of size: 0.9m X 2.10m partially glass 8mm thick with sun film, door stopper, handle for bothsides, altrops, hinges 4 nos, Auto door closser fixed in the partition using door vertical section of size 47x44mm top and middle section 47x44mm door bottom size is 90x44mm. The door should be assembled and connecting withgalvanized rod door panel fixed with 12mm thick both side prelaminated particle board. All around particle board fixed with aluminum glazing clip The rate is inclusive of labour charges, hardwaresetc., complete and as directed by the departmental officers. 18 Supplying and fixing of PVC Mosquto Mesh and fixing the existing windowframes and necessary screws, clamps, tapes etc all complete. 19 Fabricating and supplying Kiosk cabin of size 80x 80x 90 all verticle members and horizontal members are made up of100x50x2mm thick MS Tube, Bottom florring using MS chequared plate, and roof covered with double layer puffed sheet 50mm thickness. Rear side of cabin is fully closed with one openable door of size 26 x 7 and 2 sides 6 x 4opening withaluminium sliding glazed window with self lock and other one side provide rolloing shutter roof projection of all round 20 feet provisions. inner walls, outer walls and ceiling are to be covered with 3mm thick iron + ACP sheet. Floor with 12mm thickness of H.D.H.M.R board. Inside of cabin provision for cash counter, shelves, racks, fulls ceiling, atractive lights, conceeled wiring, work table, plug points switches and lock & keys and including provideing chair and table etc., complete. The rate includes cost of all material, transport to site, labour charges assembling and placing in postion where ever as instructed by departmental officer 20 Supplying and installing of the Cup Board of size : 1.50m X 1.0m X 0.60m with necessory BWR Ply woods and finishing the laminated sunmica anddraws, clamps and hinges ans screwswith colour finalized by the enginering incharge and as directed by the departmental officers. 21 Supplying of Office Table L1200 x W600 x H750mm 25mm thk.Table Top E/B L1200mm X W 600mm - 1Nos 25mm thk. Vertical Leg E/B 960mm X 750mm - 2Nos 18mm thk. Modesty 1200mm X 750mm - 2Nos Side Storage unit Size : L330 x D600 x H750 mm Mobile Pedestal (1 Drawer). Table Tops and legs made out of 25mm and 18mm thick Waterproof Plywood, all exposed edges are Machine pressed Edge banding finish. 1 Draw mobile pedestals of size 330mm W x 450mm D x 680mm H completely made of 18mm Waterproof Plywood finished with 2mm thick PVC machine pressed edge banding. Mobile unit to have central locking system with wheels.The rate includes cost of all materials, handles, lock, wheels, labour charges, transportation charges etc., The materials to be used shall be got approved by the Executive Engineer concerned before use on work,etc., complete as per standard specification. . 22 Supplying and fixing of bench of size: 1.50m length X 0.45m height with six legs provided top finishing water proofing plywoods with sunmica laminated sheet finishing colour finalized engineering incharge and as directed by the departmental officer. 23 Supplying of Office Table L1200 x W600 x H750mm 25mm thk.Table Top E/B L1200mm X W 600mm - 1Nos 25mm thk. Vertical Leg E/B 960mm X 750mm - 2Nos 18mm thk. Modesty 1200mm X 750mm - 2Nos Side Storage unit Size : L330 x D600 x H750 mm Mobile Pedestal ( 3 Drawer ). Table Tops and legs made out of 25mm and 18mm thick Waterproof Plywood, all exposed edges are Machine pressed Edge banding finish. 3 Draw mobile pedestals of size 330mm W x 450mm D x 680mm H completely made of 18mm Waterproof Plywood finished with 2mm thick PVC machine pressed edge banding. Mobile unit to have central locking system with wheels.The rate includes cost of all materials, handles, lock, wheels, labour charges, transportation charges etc., The materials to be used shall be got approved by the Executive Engineer concerned before use on work,etc., complete as per standard specification. . 24 Supplying of Computer Table L1200 x W600 x H750mm 25mm thk.Table Top E/B L1200mm X W 600mm - 1Nos 25mm thk. Vertical Leg E/B 960mm X 750mm - 2Nos 18mm thk. Modesty 1200mm X 750mm - 1No Side Storage unit Size : L450 x D600 x H750 mm Mobile Pedestal ( 3 Drawer ) and 1 no of sliding key board try. Table Tops and legs made out of 25mm and 18mm thick Waterproof Plywood, all exposed edges are Machine pressed Edge banding finish. 3 Draw mobile pedestals of size 450mm W x 450mm D x 680mm H completely made of 18mm Waterproof Plywood finished with 2mm thick PVC machine pressed edge banding. Mobile unit to have central locking system with wheels.The rate includes cost of all materials, handles, lock, wheels, labour charges, transportation charges etc., The materials to be used shall be got approved by the Executive Engineer concerned before use on work,etc., complete as per standard specification. 25 Supplying of Computer Table L1200 x W600 x H750mm 25mm thk.Table Top E/B L1200mm X W 600mm - 1Nos 25mm thk. Vertical Leg E/B 960mm X 750mm - 2Nos 18mm thk. Modesty 1200mm X 750mm - 1No Side Storage unit Size : L450 x D600 x H750 mm Mobile Pedestal ( 3 Drawer ) and 1 no of sliding key board try. Table Tops and legs made out of 25mm and 18mm thick Waterproof Plywood, all exposed edges are Machine pressed Edge banding finish. 3 Draw mobile pedestals of size 450mm W x 450mm D x 680mm H completely made of 18mm Waterproof Plywood finished with 2mm thick PVC machine pressed edge banding. Mobile unit to have central locking system with wheels.The rate includes cost of all materials, handles, lock, wheels, labour charges, transportation charges etc., The materials to be used shall be got approved by the Executive Engineer concerned before use on work,etc., complete as per standard specification. 26 Supplying and installation of Cash Chest for standard size with necessory loking arrangements with ISI metal and as directed by the departmental officers. 27 Supplying and installation of ETM Machine Rack of size: 1.50m X .40M X 1.20m usingBWR plywood and sunmica laminated sheet finishing with necessory clamps, screws etc., all complete and as directed by the departmetal officers 28 Supplying and fixing Stainless Steel (202 grade) Three seater of size 1780 x 660 x 790mm armed chair using 18 gauge thick perforated stainless steel sheets with stainless steel frames alround using 20mm diapipe of 18 gauge seat and back rest with stainless steel arms using 25mm ovel pipe of 18 gauge thick resting on 2mm thick SS box section of size 40mm x 60mm, 2 legs of 48mm outer dia Stainless steel tubes of 202 grade (As shown in the enclosed drawing) . The rate includes all taxes, cost of materials like stainless steel tubes, sheets, SS anchor fasteners, washers, labour charges for fabricating, transporting to site , drilling & fixing the chairs in position etc. complete as directed by the engineer- in- charge. 29 Supplying and Fabricated Bench With Table Canteen of size 1.50m X 0.60m with Stainless steel SS304 material by using 18gauge sheet with welded for all joints with 4 nos bottom rubber bush and single seat stool of size 0.35m circular with SS 18gauge sheet with 4 logs pedestal with rubber bush etc., all complete and as directed by the departmental officers.
