}

Tender For Interior Furnishing Work At Alternate Premises Of Canara Bank’S Regional Office Pune-I, Pune-Maharashtra

Canara Bank has published Tender For Interior Furnishing Work At Alternate Premises Of Canara Bank’S Regional Office Pune-I. Submission Date for this Tender is 19-08-2025. Furnishing Work Tenders in Pune Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

50636790
Tender For Interior Furnishing Work At Alternate Premises Of Canara Bank’S Regional Office Pune-I
Tender
Indian
Maharashtra
Pune
19-08-2025

Tender Details

Tender For Interior Furnishing Work At Alternate Premises Of Canara Bank’S Regional Office Pune-I; 1 PARTITIONS Sq. Mtr. 256.39 Providing and fixing Full ht double skin Partitions / Full height Partly Glazed & Partly solid partitions / Low height solid & glazed Partitions (straight and curved in plan) as per specification including skirting, complete as per drawings and instructions. Complete in all respects. The rate shall be inclusive of the necessary hardware, providing suitable doors at all locations wherever required with SS approved hardware such as hydarulic door closer (DORMA), handles, mortise latches or tubular latches etc complete. Area of the doors shall be treated as partition & measured along with partition area only. Main frame Providing and fixing in position Aluminium Frame Work of hollow sections of 50x50mmx1.2mm size . The aluminium frame work shall be of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, with vertical & horizontal members at not more than 600 mm center to center including necessary additional supports for fixing of patch fittings of door, bracing, runner etc. so that lateral movement is arrested as per instructions of Architect. The first horizontal member shall be fixed at ground level and thereafter every 600mm. The work is to be completed in all respects with necessary consumeable as per detailed drawing, as specified and as directed by the Architect. Skin:- Both side with 12 mm thk ply screwed to frame work on both sides with joints as shown or directed. The rate shall be inclusive of Patta with grooves, borders, bottom, middle & top as advised by bank. For Glazing Skin:- 8.0 mm thk. clear float glass Straight / segmented glass of approved design and drawing fixed with 32x10mm thk.RUBBER WOOD. moulding as shown in the drawing or as directed by Architect. All doors (solid flush door type) with matching laminate and/or 8 mm thk clear glass and SS hard ware of handles, tubular latch, foot stopper, hydraulic door closure of Dorma make, brass hinges to be provided wherever required and will be measured along with partitions area. 2 Glass partition MAIN DOOR /RO HEAD CABIN FRONT PARTITION Sq. Mtr. 5.33 Providing top and bottom ozone make profile sections member along with 12mm glass ( toughened). The item shal include door of 12mm toughned glass along with ozone make profile sections with s.s finish handles 300 mm D type, along with Glass door lock with handles, verpanel strike box L patch, complete as per drawing shown Complete ProvidingandfixingonsiteOzonemakeHANAEAZY11systemswith12mmtoughened glass fixed to OZ DP PR 11 3MTR AN fixed profile of all four sides. tobeinstalledbyapprovedfabricatorofmanufactureronlyaspermanufacture guideline and system practice. Complete. 3 Glass door (Size 1000x3000mm) no 5.00 ProvidingandfixingonsiteOzonemakeHANAEAZY11singleswingdoorwith12mm thk toughened glass 1000mm with and 3000mm height. Item to include :- Glass partition on twin pro sytsem OGC-DH-1 STD AN frame front face mounting hinge nsk acc 780 plate std silver nsk 780 std door closer ozhn dp1 ps 12mm permter seal ozhn dpi 3mtr an door profile ozhn dpi gk 12mm bl epdm gasket oz dp 1 1/2 gdl std an glass door lock with lever handle. ozhn std re inforcement plate ozdp pr 11 3mtr an fixed profile tobeinstalledbyapprovedfabricatorofmanufactureronlyaspermanufacture guideline and system practice. Complete. 3.1. FROSTED FILM ON GLASS sq.m 20.00 Providingandfixingonsitefrostedfilmof3M/Garware/Lumarmaketobeapplied on glass as per design given by Architect. Complete. 4 Back painted glass 8 mm with 6mm Ply behind Statue with bank logo. sq.m 2.88 5 WALL PANELLING sq.m 128.45 Providingandfixing1.0mmthkapprovedLaminateforpanellingonwall&columnincludingskirtingwithjointsandgroovesincluding8mmthk.plybackingon50X25mmAluminiumSectionsat600mmcentresandrubberwoodmouldingofsize35x12mmasshownindetaileddrawingandasdirected.Therateshallbeinclusiveofmulti-colouredlaminateincludingpatta,bordersetccomplete. 6 Glass panelling sq.m 8.00 Providingandfixing6mmthkbackpaintedwhiteglasstobeprovidedforanytimeofpartitionpanellingfalseceilingtobefixedwithssstudsalongwithprovisionforLEDcovelightswithallhardwarefittingsfixture,completeasper design. Basic rate is @ 300/sft ..... more in document

Key Value

Document Fees
Refer document
EMD
INR 40500.0 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail