Tender For Shri Gajendra Singh Inter College In Bidhuna Auraiya Restoration, Repair, Reconstruction And Establishment Work Under Project Alankar. - Dismantling of Brick work manually by machenical means including Stacking of steel bars and disposalof unserviceability material with in 50 meter lead as per engineer incharge. Chapter-17- S.I.-15.7.4 2 Dismantling of R.C.C. work manually by machenical means including Stacking of steel bars and disposalof unserviceability material with in 50 meter lead as per engineer incharge. Chapter-17- S.I.-15.3 3 Dismantling Old plaster or skirting racking but joints and cleaning the surface of plater including disposal of rubbish to the dumping ground with in 50 meter lead as per engineer incharge. Chapter-17- S.I.-15.56 4 Dismantling Tile work in floor and roofs laid in cement mortar including stacking material with in 50 meter lead for thickness of iles 25mm and upto 40mm DAR15.23.2 5 Excavation in foundation in ordinary soil (loam clay, or sand) including lift upto 1.5 meter and lead upto 30 m & inlcuding filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundatiohn trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge of 30 m from the foundation trenches. As per sor Chapter no. 4 SI. no. 251 6 Concrete with 4 cm (1½) gauge brick ballast and fine sand of 1.25 fineness modulous and cement in proportion and cement in proportion of 8:4:1 in foundation and under floors, including suply of all material, labour & T&P etc. required for proper completion of the work. 7 First class work in 1:4 cement and core sand of 1.25 F.M mortar in foundation plinth including supply of all materials, labour and T&P etc. required for proper completion of work. As per Sor Chapt. No. 6 SI NO. 305(ns.)-3 8 R.C.C Work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors & window excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I binding wire and including necessary cretering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the items. As per Sor Chapt No. 5 SI No. 283. 9 First class work in 1:4 cement and core sand of 1.25 F.M mortar in Superstructer including supply of all materials, labour and T&P etc. required for proper completion of work. As per Sor chapt. 6 SI NO. 305 (NS) 10 12mmCementplasterwithcementmortarinproportionof 1:4 cement & coarse sand of single coat for interior plasteringuptofloortwolevelincludinginternalrounded angleschamfers,androundedanglesnotexceeding80mm in girth and finished even and smooth. 11 R.C.C Work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1½:3 in slab excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I binding wire and including necessary cretering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the items. As per Sor Chapt No. 5 SI No. 284 NS 12 R.C.C Work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 inColumn exxcluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I binding wire and including necessary cretering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the items. As per sor chapt. 5 SI No. 289. 13 Mild Steel or iron in plain work such as reinforced concrete or reinforcement brick work (when not included in an over all rates) wrought to required shape as necessary including benefit for proper completion fo the work and including supply of all steel and wastage and over lappign and hooks. 14 6mmCellingplaster1:3(1cement:3Coarsesand)cement &fine sand in F.M. not less than 1.25, 1:3 including chiping of RCCsurfacebeforeceilingplaster.Thecostofincludingall material, labour T&P and scafolding etc. complete. 15 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tieods grading etc. wrought to required from including supply to steel bolt, nuts wastage etc and their fixing required for proper completion of the work. 16 2.50 cm thick 1:2:4 plain cement concrete floor with cement, aproved coare sand and 2 cm graded approved stone laid in panels finished with 3 mm flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 8 cm thick base concrete consisting of cement, local sand and brick ballast 4 cm gauge in the proportion of 1:4:8 and removing any over lappign mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc. required for proper comletion of the work. 17 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tieods grading etc.M.S. Grills & stair case raillingwrought to required from including supply to steel bolt, nuts wastage etc and their fixing required for proper completion of the work. 18 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. As per SOR chapt 14SI No. 11.41(A) 19 Supply and fixing 6 mm (1/4) China white slazed thes in flooring or in skirting or Dado laid with 1:3 cement and Approved course sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tools and plants etc. required for proper completion of the work. 20 Providing and Applying white cement based putty average thickness of 1 mm of approved brand over the plasterd wall surface.as per Chap-15 S.I. no-SOR no. 13.80 21 WallPainting with plastic emulsion paint of approved brand an manfactureto give an even shade: two or more coats on new works.Chapter-15 (13.60.1) 22 Paint or varnishing newwork small size area of new iron work with one coat of ready mixed priming and two coat paint including all Labour and material.SI No 641+642 23 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 24 Flat Back or angular front lipped Urinal Basim of white glazed earthen ware465X355X265 mm 25 Providing and fixing of Brass BIB cock of Approved quality20 mm nominal bore Chapter-20 S.I.-18.15.2 26 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc Chapter-20 S.I.-18.8.220 mm nominal dia Pipes 27 15 mm nominal dia Pipes Chapter-20 S.I.-18.8.1 28 Providing & fixing 110mm dia PVC pipe for rain water supplyincluding necessary T&P and as per the direction of Engineer-incharge. Chapter-18 S.I.-new item 19 29 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 30 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.. Including welding, grinding, buffing. Polishing and making curature ( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangment as per approved of Engineering-in-charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 31 Wiring point for light with 1.5 sq.mm.FRLSHPVCinsulated multistrand single core copper conductor cablein heavy guage rigid steelconduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thickphenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. 32 Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash. 33 S & F surface/Flush mounting 8ways SPN distribution board without additionalmetal door without MCB complete in all respect, as direct by Engineer in Charge. 34 Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. 35 Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work.
