Tender For Repair To Plaster, Ceiling, Aluminium Joinery, Plinth Protection,Flooring And Certain Misc Repair Inzone I And Ii At Umroi Mil Stn Under Ge Umroi.; 1 Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces in two layers (10mm thick 1st layer + 5mm thick finishing layer) of walls, chajja, fins, facia etc. any height mixed with water proofing compound (for 5mm thick finishing layer only) @ 3 % of weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed.Note: (i) Water proofing compound will be measured and paid separately(ii) Cost of scafolding, any height are deemed to be inclusive in the quoted rate. 2 Supply only Integral waterproofing compound 3 Material & Labour for preparation of new plastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. 4 M&L for rendering 10mm thick in cement mortar (1:6) on brick or concrete surfaces of walls, finished even and smooth without using extra cement including taking down existing plaster of any description complete all as specified and directed 5 M&L for preparation of newly plastered surfaces of walls and applying two coat of distemper oil emulsion over wall care putty of 1.0 mm thick wherever required as per direction of Engr-in-charge compelete all as specified and as directed. Note: Material & labour for wall care putty will be measured and paid separately. 6 M&L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying a coat of distemper oil emulsion over wall care putty of 1.0 mm thick wherever required as per direction of Engr-in-charge complete all as specified and as directed. Note: Material & labour for wall care putty will be measured and paid separately. 7 Material and labour for 1 mm thick internal wall care putty on walls complete all as specified and directed. 8 M&L for complete removal of existing treatment and applying two coats of white wash on wall surfaces complete all as specified and directed. 9 M&L for preparation of new surface and applying two coats of white wash on ceiling surfaces complete all as specified and directed. 10 M&L for complete removal of existing treatment and applying two coats of white wash on ceiling surfaces complete all as specified and directed. 11 M&Lfor preparation of old external surfaces of existing treatment by washing, rubbing down and stopping of weather proof paint and painted surfaces of external wall and applying one coat of antifungal paint complete all as specified and directed. 12 Material and labour for preparation of old wooden surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description over 10 cm in width or girth not other wise described complete all as specified and directed. 13 M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 14 M&L for glazed ceramic coloured /printed tiles 450x350x 7mm/450x600x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match on vertical surfaces of wall as in skirting, dado, etc. over and including 10 mm thick rendering (backing coat) in cement mortar 1:4,including demolition of existingtiles and cement mortar bedding (but not backing) and rubbish of the premisses complete all as specified and directed. 15 Material and labour for coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor over and including 15mm thick screed bed/bedding layer in cement mortar 1:6 including demolition of existing floor tiles and bedding layers and rubbish of the premisses complete all as specified and directed. 16 M&L for machine cut kota stone slab flooring 18-20 mm thick over and including 20mm thick cement screed base in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demoltion of kota stone slab and removing from site and rubbish of the premisses complete all as specified and directed. 17 M & L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in cement mortar (1:3) including demolition of existingkota stone slab and cement mortar bedding (but not backing)and removing from site and rubbish of the premisses complete all as specified and directed. 18 M & L for Chequered cement concrete tiles of size 20 cm x 20 cm x 18-20 mm thick, set and jointed and pointed in neat cement slurry in floors with mixture of white and grey cement in equal portions and no pigment laid over and including 20mm thick screed bed/bedding layer in cement mortar 1:4 complete all as specified and directed. 19 M&Lfor Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchlaid over and including 20mm thick screed bed/bedding layer in cement mortar 1:4 and demoltion of existing slab and removing from site and rubbish of the premisses complete all as specified and directed 20 Taking up or down steel tubing 15mm boreand connections including cleaning for refixing or removal to store and S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. 21 Taking up or down steel tubing 20 mm boreand connections including cleaning for refixing or removal to store and S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. 22 Dismantling wallandceilingboards(fibre, pulp, insulation, etc.) or insulationboards/slabs/ blankets, any thickness including cover fillets complete all as specified and as directed 23 M&L for anodised aluminium snap grid frame work for false ceiling of size 600mm x 600mm including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified all as specified. 24 S&F decorative PVC ceiling board of superior quality of size 600mm x 600mm x 5mm thick fixed in aluminium snap grid frame work including fixing accessoriescomplete all as specified and as directed.Note:(I) Frame work shall be measured and paid separately under respective item. (II) Colour and design PVC ceiling board shall be approved by GE. 25 S&F in repair sinks with drainage board madeup of 1mm thick stainless steel kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. 26 S&F in repairs kitchen plate rackmade of stainless steel sheet not less than0.63mm thick of size 39 inch x 30 inch, the hooks for hanging the utensils should be of high quality steel complete all as specified and directed. 27 S&F in repair wash hand basin with pedestal, white, flat back of size 630 x 450 mm excluding pillar taps but including waste coupling, waste pipe and bracket, PVC connection pipe of 15 mm size of length 600mm with PTMT nuts, etc.including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. 28 S&Fin repairs vitreous china wash down water closet pan EWC, white including white plastic water closet seat & back cover with flat bottom and mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete all as specified and directed. 29 Supply and fixed in repairs vitreous china squatting pan, Orissa pattern of size 580 mm x 440mm white withP or S trap, front or back inlet and integral foot rest (Excluding flushing cistern and flush pipe) complete all as specified and directed. 30 S&F in repair 10 litres capacityPVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern & fixing/connecting to pipes complete all as specified and directed. 31 Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube andABS wall hook including making connections and fixed in position complete all as specified and directed. 32 M&L for 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers fixed in repairs complete all as specified and directed. 33 Supply and fix in repair brass chromium plated wall mixer for mixing hot and cold water screwed down to CPVC pipe SDR-11 Pipe of outer dia 20 mm complete all as specified and directed. 34 S & F in repair brasschromium plated basin mixer telephonic with crutch for mixing hot and cold water screwed down to CPVC SDR-11 pipe of dia 20 mm complete all specified and directed. 35 S&Fin repairs brass chromium plated shower rose 125mm sizeincluding fixing to steel pipe or union complete all as specified and directed. 36 S&F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flanges complete all as specified and directed. 37 Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. 38 Supply and fix in repair stainless steel toilet paper holder with flat recessed type complete all as specified and directed. 39 S&F in repairs grating doom 100 mm dia of PTMT (Minimum weight 40 gms) including jointing with solvent cement complete all as specified and directed. 40 Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level) and removing debries from site of work complete all as specified and as directed. 41 M&L for 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection finished fair and even with using extra cement complete all as specified and as directed. 42 M&L for plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)as in concrete surface over top ofRCC chajjas with using waterproofing compound as per manufacture instruction finished even & fair with using extra cement inclduing demolition of existing cement concrete complete all as specified and as directedNote: (i) Water proofing compound will be measured and paid separately(ii) Cost of scafolding, any height are deemed to be inclusive in the quoted rate. 43 M&L for TMT bars 10 mm diaand over cut to length bent to shape required includingcranking, bending spirally for hooping for columns hooking ends and bindingwith and including mild steel wire ( annealed)not less than 0.9 mm dia complete all as specified and directed. 44 Taking down eaves gutters, sewage lines andrainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swannecks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. 45 S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including scafolding etc complete all as specified and directed. 46 S & F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. 47 S&F for 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with access door including necessary scafoldingupto any height complete all as specified and directed. 48 S & F 110mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door including necessary scafoldingupto any height complete all as specified and directed. 49 S & F PVC (SWR) vent cowl 110mm dia complete all as specified and directed. 50 Taking down chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. 51 Taking down shutter of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed. 52 Taking down chowkhats or frames with shutters (without taking off shuttersfrom the frames) exceeding 1.5 Sqm but not exceeding. 4.00 sqm each complete all as specified and directed. 53 S & F well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.Note : The rate quoted are deemed to be inclusive ofmaking good to the disturbed surfaces to match the existing surfaces. 54 S&F 35 mm thick factory made second class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm veneeredparticle board with commercial veneering on both faces. The size of rails and style as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.. 55 S&F second class hard wood 35mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or roundedfitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified inSSR Part I, Section 8, clause 8.24(a) and fitted to chowkhats complete all as specified and directed. 56 S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staple to wooden doors/windows/openings complete al as specified and directed.Note : The rate quoted are deemed to be inclusive of wooden beading. 57 M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfacescomplete all as specified and directed. 58 S&F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staple to wooden doors/windows/openings complete al as specified and directed.Note : The rate quoted are deemed to be inclusive of wooden beading complete all as specified and directed. 59 S&F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staple to aluminium doors/windows/openings complete al as specified and directed.Note: The rate quoted are deemed to be inclusive of aluminium U-clip section if changed while repairing. 60 S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed and as shown on drawing.Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. 61 S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and directed. 62 S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. 63 S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. 64 S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. 65 S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodizedcomplete all as specified and directed. 66 S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodizedcomplete all as specified and directed. 67 S&F 300 mm long brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed. 68 S & F 300 mm long aluminium alloy ,anodised sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast alunimium alloy and fixed complete all as specified and directed. 69 M&L for 18/19 mm thick plywood grade BWR, type BB fixed with screws to timberframe work for kitchen cabinet, cupboard etc. including dismantling existing wooden cabinet/ cupboard complete all as specified and directed. 70 M&L for 0.9 mm thick decorative laminate type I of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions complete all as specified and directed. 71 S&F 50 mm size butt hinges, extruded brass, with mild steel hinge pin, bright polished, type E-11 complete all as specified and directed. 72 S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. 73 S&F100 mm long, brass handles, cast type, polished bright complete all as specified and directed. 74 Cleaning water tank of capacity 500 Litre and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. 75 M&L for uprooting of tree including roots from walls of bldgs and spraying with acid of required quantity complete from any location of bldg up to 4 storied height and making good disturbed surfaces with cement mortar (1:4) or PCC type C1(1:3:6) using 20mm graded stone aggregate including necessary scafolding completearea exceeding 1 Sqm but not exceeding 2 Sqm (girth of trees 5 to 10 cm) complete all as specified and directed by Engr in charge. 76 Dismantling AC/CGI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets complete all as specified and directed. 77 S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . 78 S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . 79 Supply and fixing aluminium anodised (powder coated) ventilator frame (section for frame63.5 X 38.1X 1.20mm thick) with shutter(section for shutter 41 x 20 x1.2mm thick)(bottom half portion fixed and top half portion with louver)including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete andglazing with and including 4 mm thick frosted glass to aluminium frame work and louver using rubber gasket and fixed with stainless steel wire cloth of 0.36 mm dia and average width of aperture 1.40 mm outside vent with staple and suitable wall angle of size 25.4 x 25.40 x 1.1mm thick and fillets with screws and washers etc including Deco Grill of Model / Design No. DG 104 and 6.3mm thick etc. complete all as specified and as directed.Note: The quoted rate shall be inclusive of taking down ventilator of any size and any description and making good disturb surfaces to match the existing surface as per existing schedule of finishes. 80 S&F Hollow PVC wall lining consisting of 5mm thick plain colour PVC sheetinclusive of solvent cement and fixing on and including GI frame as per specifications including taking down existing wall panelling and similar work complete all as specified and as directed. 81 M & L for vitrified ceramic tiles 8 to 10mm thick light shade(square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floor, etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor laid over and including 15mm thick screed bed/bedding layer in cement mortar 1:6 including demolition of existing floor tiles and bedding layers, removings serviceable tiles to store and rubbish of the premisses complete all as specified and directed. 82 Material and labour for coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor over and including 15mm thick screed bed/bedding layer in cement mortar 1:6 including demolition of existing floor tiles and bedding layers, removings serviceable tiles to store and rubbish of the premisses complete all as specified and directed. 83 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc including brushing neat cement slurry with 3.00 kg of cement per sqm complete all as specified and directed. 84 S&F Pressed steel frames for doors of frame size 125x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.Note : Filling of hollow portion of frames with PCC shall be measured and paid separately. 85 Material & labour for PCCtype C1 1:3:6 (20 mm graded stone aggregate) for filling of hollow frame complete all as specified and directed. 86 Material & labour for PCCtype B0 1:2:4 (12.5mm graded stone aggregate) for fixing hold fasts, angle, etc including necessary form work complete all as specified and directed. 87 S & F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. 88 Supply and fixedstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, or stainless steel wire staples including all cuttings, wastage etc, complete all as specified and directed. 89 Dismantling/taking down existing hessain base felt or clay tiles or any other existing water proofing treatment from roof/chajja including cement plaster, cleaning the surface and removing the dismantled debris to a distanceupto 50 mandapply 15 mm thick 1:4 cement mortar over cleaned surface and laying water proofing membrane treatment using 3mm thick APP modified membrane consisting five layer membranes with features as specified, weighing not less than 4.00kg/sqm laid over a coat of cold bituminous primer @ 0.40 kg/sqm by torching the membrane and sealing the over lap by 100mm length side and 150mm width side all as per ,manufacturers instruction including joints and changes in direction be curved with cement mortar 10mm thick 1:3 mixed with SBR latex @ 2.00ml/bag of cement curved well before laying of membrane, including applying two coats of solar reflective bituminous aluminium paint @ 0.10 litre/sqm all as per manufacturer instructions and to the satisfication of Engr-In-Charge complete all as specified and directed. Note: (i) Irrespective of lap the net covered area will only be measured for payment.(ii) The quoted rate is deemed to be inclusive of bituminouus primer, APP membrane, solar reflectivebituminous aluminium paint , SBR latex and diconnecting and refixing existing water tank and necessary pipe fitting. 90 M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, including making good disturbed area/surfaces with cement concrete 1:2:4 type B-I including taking down old unserviceable nahani/floor trap complete all as specified and directed. 91 S&F in repairs 15mm dia bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 92 M&L for cement concrete type C2 1:3:6 using 40 mm graded aggregate in surface channels and drains complete all as specified and directed. 93 M&L forrepair and rendering 10mm thickin cement mortar 1 :3on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete includingcleaning of visible reinforcementandtreating with cement slurry also necessary repair to cracked concreteif any with cement concrete1:2:4 Type B-0 using 12.5mm gradedstone aggregateincluding necessary scaffolding work for double/single storey bldgs complete all as specified and directed. 94 Material and labour for 5 mm thick rendering incement mortar (1:3)on fair faces of exposed/non exposed concrete surfaces such assoffits of slabs, chajja, facia and simillar work including mixing & application of integral water proofing compound as per manufacture instruction and finishing the surfaces fair and even including taking down of cement plaster of any description including racking out joints for key scrubing with water complete all as specified and directed.Note: (i) Water proofing compound will be measured and paid separately(ii) Cost of scafolding, any height are deemed to be inclusive in the quoted rate.
