Construction Of Cooperative Outlet At Stok(By Way Of Balance Work)- 1 Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50metres lead as per direction of Engineer - in- charge. 2 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-charge. In cement mortar 3 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50metres lead : Of area 3 sq. metres and below 4 Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 5 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12(1 cement :6 coarse sand:12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) 6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 7 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) 8 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). 9 Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. 10 Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:3:6 (1 Cement: 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size). 11 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia & length (holdfast lugs or dash fastener shall be paid for separately). Second class Kail wood 12 Providing and fixing ISI marked flush door shutters conforming to IS:2202(PartI) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 13 Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm). 14 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note:-Butt hinges and necessary screws shall be paid separately) Second class kail wood 35 mm thick shutters 15 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) 16 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) 17 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) 18 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 19 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Newwork (two or more coats) over and including water thinnable priming coat with cement primer 20 Finishing walls with textured exterior paint of required shade : Newwork (Two or more coats applied @3.28 ltr/10sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 21 French spirit polishing : Two or more coats on new works including a coat of wood filler 22 Varnishing with varnish of approved brand and manufacture : Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish 23 Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with agrout of average 12mm thick in cement mortar 1:3 (1cement : 3coarse sand), including pointing with white cement mortar 1:2 (1white cement : 2 marble dust) with anad mixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm 24 Providing edge moulding to 18mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.Granite work 25 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, M.S. tube 26 Providing and fixing 12 mm thick pre laminated flooring of approved brand as per direction of engineer incharge, complete job AC-4 including carriage. 27 Providingandfixing 100mm Pinewoodplainliningtonguedandgrooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface. 10 mm thick 28 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm 29 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm 30 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 31 Providing and fixing aluminiums liding door bolts, ISI marked anodised (anodic coating not less than gradeAC10as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete : 300x16 mm 32 Providing 40x5mm flat iron holdfast 40cm long including fixing to frame with 10mm dia Metre bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). 33 Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with; Budloo wood 34 Centering and shuttering including strutting, propping etc. and removal of form fora) Foundations, footings, bases of columns, etc. for mass concrete 35 b) Lintels, beams, plinth beams, girders, bressumers and cantilevers 36 c) Columns, Pillars, Piers, Abutments, Posts and Struts 37 d) Suspended floors, roofs, landings, balconies and access platform 38 e) Edges of slabs and breaks in floors and walls Under 20 cm wide 39 Carriage of Material from source to site by M.T including loading, unloading and complete Job.A) Cement and steel 10km 40 b) Sand 8km 41 c) Stone aggregate 8km 42 d) Stone 16km
