|
| 1 | Stone aggregate 40 mm nominal size |
| 2 | Stone aggregate 20 mm nominal size |
| 3 | Coarse sand zone 3 |
| 4 | Portland cement |
| 5 | Hire charges of concrete mixer 0.25 to 0.40 cum |
| 6 | Vibrator (needle type 40 mm) |
| 7 | royality for good earth |
| 8 | Stone aggregate 10 mm nominal size |
| 9 | Wall form panel 1250x500 mm |
| 10 | Corner angle 45x45x5 mm 1.50 m long |
| 11 | 100 mm channel shoulder 2.50 m long |
| 12 | Double clip (bridge clip) |
| 13 | Single clip |
| 14 | M.S tube 40 mm dia |
| 15 | Solid blocks of size 30x20x15 cm |
| 16 | Solid blocks of size 30x20x20 cm |
| 17 | Solid blocks of size 40x20x10 cm |
| 18 | Structural steel such as tees, angles, channels and R.S joists |
| 19 | Red oxide zinc chromate primer |
| 20 | Adjustable span ESO+SI (2.35-3.40) |
| 21 | Adjustable telescopic prop 3m (2.02-3.75) |
| 22 | Beam clamp 300-380 mm (450-1070 mm) |
| 23 | Second class kail wood in planks |
| 24 | Second class kail wood in scantling |
| 25 | Hollock ballies 125 mm dia |
| 26 | Wall form panel 1250x450 mm |
| 27 | Corner angle 45x45x5 mm 2.50 m long |
| 28 | Column clamp 450x1070 mm |
| 29 | Prop 2 m (2-3.5 m) |
| 30 | Twisted steel / Deformed bar |
| 31 | Flats upto 10 mm thickness |
| 32 | Mild steel round bar 12 mm dia and below |
| 33 | powder coated ms butt hinges 100 mm x58 mm x58 mm x1.9 mm |
| 34 | Anjili wood scantles |
| 35 | 35 mm thick factory made solid panel pvc door shutter of single piece extrudede profile non docorative finished (matt finished) |
| 36 | Rawl plug 50 mm (designation 10 nos) |
| 37 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 38 | Bright finished or black enameled mild steel butt hinges 50X37X1.50 mm |
| 39 | Bright finished or black enameled mild steel screw 40 mm |
| 40 | Bright finished or black enameled mild steel screw 20 mm |
| 41 | Anjili wood planks |
| 42 | factory madedoor frame size 50x47 mm with wall thickness 5 mm made of single piece extrude profile |
| 43 | Fine sand zone 4 |
| 44 | Vitrified floor tile 50x50 cm |
| 45 | Ceramic glazed tiles first quality min thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 46 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms / litre |
| 47 | Plastic emulsion paint |
| 48 | Pink primer (for wood) |
| 49 | Synthetic enamel paint in black or chocolate shade |
| 50 | PVC pipe 25 mm outer dia 10 kgf / sqcm |
| 51 | PVC pipe 32 mm outer dia 6 kgf / sqcm |
| 52 | PVC pipe 50 mm outer dia 6 kgf / sqcm |
| 53 | PVC pipe 110 mm outer dia 4 kgf/ sqcm |
| 54 | PVC pipe 63 mm outer dia 4 kgf / sqcm |
| 55 | PVC vent cowls 63 mm dia |
| 56 | PVC elbow 63 mm dia |
| 57 | Stainless steel kitchen sink without drain board 470x420 mm bowl depth 178 mm |
| 58 | C.I bracket for wash basin and sinks |
| 59 | 15 mm CP brass tap |
| 60 | Polyethylene water storage tank with cover and suitable locking arrangement |
| 61 | Vitreous china oriss type W.C pan size 580 mm |
| 62 | Flushing cistern PVC 10 litre capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 63 | 100 mm S.C.I trap with vent heel |
| 64 | Vitreous china flat back wash basin 550x400 mm |
| 65 | C P brass waste 32 mm |
| 66 | Oxidised mild steel handles 125 mm |
| 67 | Oxidised mild steel screws 25 mm |
| 68 | iron hook & eyes 100 mm |
| 69 | pvc 45 degree elbow 63 mmdia |
| 70 | pvc bend 63 mm dia |
| 71 | pvc door toe 63x63x63x mm dia |
| 72 | Oxidised mild steel towed bolt (barrel type) 200X10 mm |
| 73 | Oxidised mild steel screws 30 mm |
| 74 | Brass mortice latch and lock 100X65 mm with 6 levers & a pair of brass liver handles |
