Construction Of Ht/Lt Line/Sub-Station And L.T. Extension Work For Giving New Connection As Per Uerc Regulation Under 33/11 Kv S/S Lalpur Under Edsd, Kichha
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Aug 2025
0 days left
EMD
75000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lalpur → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
construction Of Ht/Lt Line/Sub-Station And L.T. Extension Work For Giving New Connection As Per Uerc Regulation Under 33/11 Kv S/S Lalpur Under Edsd, Kichha
BOQ
| Sl. No. | Item Description |
| 1 | Annexure-A (LABOUR CHARGES) |
| 2 | Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrod with the help of G.I. wire as per construction manual. |
| 3 | Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work |
| 4 | Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per constructionmanual in LT line |
| 5 | Fixing, tightening and nozzling of stay with pole and stay rod on required tension as perconstructionmanual in 11 KV Line |
| 6 | Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement :4 graded stone 20mm nominal size: 8 coarse sand ) block includ ing cost of Cement,sand andstone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual. |
| 7 | Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work. |
| 8 | Erection of PCC single support pole after digging pit & back filling soil in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual |
| 9 | Erection of SP-33 single support pole after digging pit & back filling soil with grouting of poles by CC mixture of ratio 1:4:8 with the cost of required cement, sand, stone grit etc complete in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual |
| 10 | Erection of SP-55 single support pole after digging pit & back filling soil with grouting of poles by CC mixture of ratio 1:4:8 with the cost of required cement, sand, stone grit etc complete in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual. |
| 11 | Erection of SP-72 single support pole after digging pit & back filling soil with grouting of poles by CC mixture of ratio 1:4:8 with the cost of required cement, sand, stone grit etc complete in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual. |
| 12 | Erection of PCC Double Pole structure after digging pit & back filling soil in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual. |
| 13 | Erection of SP-33 Double Pole structure after digging pit & back filling soil with grouting of poles by CC mixture of ratio 1:4:8 with the cost of required cement, sand, stone grit etc complete in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual. |
| 14 | Erection of SP-55 Double Pole structure after digging pit & back filling soil with grouting of poles by CC mixture of ratio 1:4:8 with the cost of required cement, sand, stone grit etc complete in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual. |
| 15 | Muffing of ST poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement,stone and sand etc. |
| 16 | Dismantling of Transformers from double pole /plinth including openingof all connections, circuts & earthing strip etc. & Cartage upto Store as per direction of Engineer in Charge (25 KVA). |
| 17 | Dismantling of Transformers from double pole /plinth including openingof all connections, circuts & earthing strip etc. & Cartage upto Store as per direction of Engineer in Charge (63 KVA). |
| 18 | Dismantling of Transformers from double pole /plinth including openingof all connections, circuts & earthing strip etc. & Cartage upto Store as per direction of Engineer in Charge (100 KVA). |
| 19 | Fitting and fixing of 11 KV phillfer meteringcubical with CT & PT unit in metering room with grouting including making of connection complete in all respect as per direction of engineer in charge. |
| 20 | Fitting and fixing of LT phillfer meteringcubical with CT & PT unit with grouting including making of connection complete in all respect as per direction of engineer in charge. |
| 21 | Laying and erection of L.T. XLPE Cable including crimping of lugs of size 1x70,120, 150 Sq.mm. (Including all cost of material). |
| 22 | Laying 11 KV XLPE 3x50 upto 3x185 sq.mm cable Complete in all respect as per direction of Engineer in charge. |
| 23 | Mounting of new 100 KVA Tranformer on double pole structure including neutral & body earthing of T/F\"s separately and fixing of channel / angle etc. and making all connections ofHT and LT side and its complete commissioning as per direction of Engineer in charge. |
| 24 | Mounting of new 63 KVA Tranformer on double pole structure including neutral & body earthing of T/F\"s separately and fixing of channel / angle etc. and making all connections ofHT and LT side and its complete commissioning as per direction of Engineer in charge. |
| 25 | Mounting of new 25 KVA Tranformer on double pole structure including neutral & body earthing of T/F\"s separately and fixing of channel / angle etc. and making all connections ofHT and LT side and its complete commissioning as per direction of Engineer in charge. |
| 26 | Fixing of HT Fuse sets on double pole structures including making of connections complete work. |
| 27 | Fixing of triangular type bracket on 11 KV line |
| 28 | Laying, Spreading, Stringing and sagging of 11 KVline in 3 phase (3 Phase 3 wire) of ACSR Weasel as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and sagging chart. |
| 29 | Laying, Spreading, Stringing and sagging of 11 KVline in 3 phase (3 Phase 3 wire) of ACSR Rabbit as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and sagging chart. |
| 30 | Laying, Spreading, Stringing and sagging of 11 KVline in 3 phase (3 Phase 3 wire) of ACSR Dog as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and sagging chart. |
| 31 | Laying, Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire(3 phase 4 wire) with G.I. earth wire complete with binding and jumpering as per RESSPO Specn. |
| 32 | Laying, Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire(2 phase 3 wire) with G.I. earth wire complete with binding and jumpering as per RESSPO Specn. |
| 33 | Laying, Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire(1 phase 2 wire) with G.I. earth wire complete with binding and jumpering as per RESSPO Specn. |
| 34 | Route cleareance by cutting of tree branches / proning, loping and chopping of trees for L.T., 11 & 33 KV line. |
| 35 | Fixing T-off Connection Complete 11 KV line |
| 36 | Laying, Sagging & binding of AB cable of size 3x120+1x95 sqmm.(Only for cable,additional provisions to be made for matching accessories installation,case of any network modification i.e additionalpole etc. and for actual connection, disonnection as per site condition as per direction of Engineer in Charge. |
| 37 | Making of section pole for existing LT/HT line as per side requirment, complete in all respect as per direction of Engineer in Charge. |
| 38 | Jointing and fixing of cable jointing kit indoor/outdoor 11 KV XLPEheat shrinkable cable boxes as per direction of Engineer in Charge. |
| 39 | Cartage of PCC Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21- 50 Km) |
| 40 | Cartage of ST pole SP-33 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km) |
| 41 | Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km) |
| 42 | Cartage of ST pole SP-72 Poles from store centre to construction site with loading, unloading at both points and proper stacking. (Distance 21-50 Km) |
| 43 | Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends (distance 21-50 Km) |
| 44 | Cartage of the 25 KVA transformer from store center to construction site with loading and unloading at both points. (Distance 21-50 Km) |
| 45 | Cartage of the 63 KVA transformer from store center to construction site with loading and unloading at both points. (Distance 21-50 Km) |
| 46 | Cartage of the 100 KVA transformer from store center to construction site with loading and unloading at both points. (Distance 21-50 Km) |
| 47 | Cartage of the 11 KV PRMC from store center to construction site with loading and unloading at both points. (Distance 21-50 Km) |
| 48 | Cartage of the LT PRMC from store center to construction site with loading and unloading at both points. (Distance 21-50 Km) |
| 49 | Headload cartage of PCC Pole from road to site (distance 0-1 Km) |
| 50 | Headload cartage of SP-33 Pole from road to site (distance 0-1 Km) |
| 51 | Headload cartage of SP-55 Pole from road to site (distance 0-1 Km) |
| 52 | Headload cartage of SP-72 Pole from road to site (distance 0-1 Km) |
| 53 | Head load cartage of small material(distance 0-1 Km) |
| 54 | Head load cartage of 11 KV PRMC(distance 0-1 Km) |
| 55 | Headload cartage of 25 KVA transformer from road to site(distance 0-1 Km) |
| 56 | Headload cartage of 63 KVA transformer from road to site(distance 0-1 Km) |
| 57 | Headload cartage of 100 KVA transformer from road to site(distance 0-1 Km) |
| 58 | Fabrication of MS Channel, angle, 11 KV V Type Cross arm after cutting in required size with drilling of holes upto good finish for top channel bracing and special type bracket etc. as per RESPO schedule and local approced drawing. |
| 59 | Digging of trench of size 0.60x0.15 x 1.5 mtr. and laying of underground11 KV XLPE cable with makingof brick housing and fillingof sand including filling of earth with ramming. & repairing of road includingcost of cement sand and stone ballast. |
| 60 | Digging of pit through hammer due to pakka road as CC & Dammer road layer by layer as per direction of Engineer in charge. |
| 61 | Back Cartage of 25 KVA T/F from work site to JE Store/Store center Rudrapur including packing, forwarding, loading, unloading, stacking and transit insurance. |
| 62 | Back Cartage of 63 KVA T/F from work site to JE Store/Store center Rudrapur including packing, forwarding, loading, unloading, stacking and transit insurance. |
| 63 | Back Cartage of 100 KVA T/F from work site to JE Store/Store center Rudrapur including packing, forwarding, loading, unloading, stacking and transit insurance. |
| 64 | Annexure-B (SUPPLY ITEMS) |
| 65 | Supply of MS Nut & Bolt off size. |
| 66 | Supply of F Clamp made of MS flat of size 50x6 mm with suitable size bolt, nut and washer duly paited by red oxide primer. The clamp should be free from any crack, welding & burrs complete in all respect as per sample. |
| 67 | Supply of X Arm Clamp made of MS flat of size 50x6 mm with suitable size bolt, nut and washer duly paited by red oxide primer. The clamp should be free from any crack, welding & burrs complete in all respect as per sample for PCC Pole. |
| 68 | Supply of X Arm Clamp made of MS flat of size 50x6 mm with suitable size bolt, nut and washer duly paited by red oxide primer. The clamp should be free from any crack, welding & burrs complete in all respect as per sample for ST Pole SP-55. |
| 69 | Supply of LT Clamp made of MS flat of size 50x6 mm with suitable size bolt, nut and washer duly paited by red oxide primer. The clamp should be free from any crack, welding & burrs complete in all respect as per sample for PCC Pole. |
| 70 | Supply of LT Clamp made of MS flat of size 50x6 mm with suitable size bolt, nut and washer duly paited by red oxide primer. The clamp should be free from any crack, welding & burrs complete in all respect as per sample for ST Pole SP-55. |
| 71 | Supply of Stay Clamp made of MS flat of size 50x6 mm with suitable size bolt, nut and washer duly paited by red oxide primer. The clamp should be free from any crack, welding & burrs complete in all respect as per sample for ST Pole. |
| 72 | Supply of Double Pole Clamp made of MS flat of size 50x6 mm with suitable size bolt, nut and washer duly paited by red oxide primer. The clamp should be free from any crack, welding & burrs complete in all respect as per sample for PCC Pole. |
| 73 | Supply of Double Pole Clamp made of MS flat of size 50x6 mm with suitable size bolt, nut and washer duly paited by red oxide primer. The clamp should be free from any crack, welding & burrs complete in all respect as per sample for STP SP-55 Pole. |
| 74 | Supply of Stay Clamp made of MS flat of size 50x6 mm with suitable size bolt, nut and washer duly paited by red oxide primer. The clamp should be free from any crack, welding & burrs complete in all respect as per sample for PCC Pole 8.5 MTR. |
| 75 | Supply of Stay Insulator 75x90 MM. |
| 76 | Supply of Shackle Insulator 75X90 MM with Nut Bolt. |
| 77 | Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 95 Sqmm TYCO/RPG/3M Make. |
| 78 | Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 95 Sqmm to 35 Sqmm TYCO/RPG/3M Make. |
| 79 | Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm.for connection of L.T. consumer (Sintex/RMC make or other ISO reputed company) with Panel Lock with key) |
| 80 | Supply of Crimping type Al. Lug (25-100) SQ.MM. |
| 81 | Supply of MS Flat 40x6 MM. |
AI Tender Summary
Tender Timeline
Aug 08, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 27, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender