Tender For Construction Work Of Boundary Wall, Soil Filling, Interlocking And Tinset For The Construction Of Lamp At Plot Number 1548 Located Next To Idgah In Mo Shivam Colony
Tender Value
49.16 Lakhs
Estimated cost
Bid Submission
25 Aug 2025
0 days left
EMD
4.17 Lakhs
Bank guarantee accepted
Document Fee
4956
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jalalpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction work of boundary wall, soil filling, interlocking and tinset for the construction of lamp at plot number 1548 located next to Idgah in MO Shivam Colony
BOQ
| Sl. No. | Item Description |
| 1 | E/w excavation in foundaton in ordinary soil as per S.I. No-251 |
| 2 | P/l c.c. in 1:4:8 cement,f/sand & 40 mm gauge brick ballast as per S.I.No-273. |
| 3 | M-150 B/work in 1:4 cement & c/sand mortar as per S.I.No- 305(b) |
| 4 | R.C.C. work in 1:2:4cement, c/sand &20 mm gauge stone grit etcas per S.I.No-283 |
| 5 | S/f reinforcement in R.C.C. work including all cost completeas per S.I.No-504 |
| 6 | M-150 B/work in 1:3 cement & c/sand mortar as per S.I.No- 307 (A) |
| 7 | Plaster work in 1:3 cement & f/sand mortar as per S.I.No-582 |
| 8 | Finishing wall two coat of water proof cement paint of approved quality on previously old painted surface with this paint to given an even shade . Including supply of all material , labour and T&P etc required for proper completion of the work .SI No 660+661 chp -15 |
| 9 | Mild steel or Iron work in heavy sizes such as trusses ,built up gates , door frames , door records racks roof work gates etc . Wroughtto requiredfeom ,including drilling holes , rivetting or welding where necessary , and also including supply of steel bolts nuts wastage etc . and their steel , bolts fixing required for cimpletion of the work . as per Si No. 503 |
| 10 | Mild steel or Iron work in heavy sizes such as trusses ,built up gates , door frames , door records racks roof work gates etc . Wroughtto requiredfeom ,including drilling holes , rivetting or welding where necessary , and also including supply of steel bolts nuts wastage etc . and their steel , bolts fixing required for cimpletion of the work . as per Si No. 503 |
| 11 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sgm as per IS: 277, in 240 mpa steel grade, 5-7 microns ep oxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet |
| 12 | Painting or varnishingon iron work in small area with one coat of ready mixed paint etc. SI. No (641+642) |
| 13 | E/w filling with 5km cartage including ramming & dressing of as per direction of E/I |
| 14 | Construction of granular sub-base by providing well graded materials,spreading in uniform layer with motor grader on prepared surface, mixing by min place method with rotavator at OMC and compacting wih smooth wheel rollder to achivethe desired densty complete as per technical specification cluase 401 |
| 15 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 16 | Supply and laying of 80mm thick rubber molded zig zag interloking tiles joint fillup sandAs per proper comber all complete etc. Chapter no. 20 Sl no. 8 Sch. PWD 6.7 |
| 17 | S/F Inaguration board. |
| 18 | E/w excavation in foundaton in ordinary soil as per S.I. No-251 wall |
| 19 | P/l c.c. in 1:4:8 cement,f/sand & 40 mm gauge brick ballast as per S.I.No-273. |
| 20 | M-150 B/work in 1:6 cement & c/sand mortar as per S.I.No- 303(1a) |
| 21 | R.C.C. work in 1:1.5:3cement, c/sand &20 mm gauge stone grit etcas per S.I.No-13 SCH288 |
| 22 | S/f reinforcement in R.C.C. work including all cost completeas per S.I.No-504 |
| 23 | M-150 B/work in 1:4 cement & c/sand mortar as per S.I.No- 305(b)+309 |
| 24 | Plaster work in 1:3 cement & f/sand mortar as per S.I.No-582 |
| 25 | Providing and laying Vitrified tiles in floor in 600x600 mm size specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.As per DSR 2023 item No 11.41A2.1 |
| 26 | Finishing walls with Three coats Primum Acralic smooth Exterior Paintwith Silicon aditiveofron New Work Two or More Coat applied @ 1.43 ltr/10 Sqmover & including Priming Coat of exterior Primer @ 2.20 ltr/ Sqm of Appproved Brand Like Asian/ Berger. As per PWD SOR CHP-15 SCH. PWD Item No 13.47.1 |
| 27 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over theplasteredwallsurfacetopreparethesurfaceevenand smooth complete. As per SOR Chp-15 Item No 13.80 |
| 28 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sgm as per IS: 277, in 240 mpa steel grade, 5-7 microns ep oxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.As per DSR 12.50 |
| 29 | Painting or varnishingon iron work in small area with one coat of ready mixed paint etc. SI. No (641+642) |
| 30 | Fabrication of angle iron door/ window chaukhat 35x35x6mm steel window including necessary steel fitting such as handle stay etc |
| 31 | flush door commercial quality 32mm thick conforming to SI mark including fixing of wooden cleats &stopper and including fixing and adjustment of hinge bolts lock handle spring fitting fitting with required for proper comletion PWD SOR CHP 9 470 |
| 32 | S/F Inaguration board. |
| 33 | E/w excavation in foundaton in ordinary soil as per S.I. No-251 |
| 34 | P/l c.c. in 1:6:12 cement,f/sand & 40 mm gauge brick ballast as per S.I.No-273. |
| 35 | M-150 B/work in 1:6 cement & c/sand mortar as per S.I.No- 303(1a) |
| 36 | M-150 B/work in 1:4 cement & c/sand mortar as per S.I.No- 305(b) |
| 37 | R.C.C. work in 1:2:4cement, c/sand &20 mm gauge stone grit etcas per S.I.No-283 |
| 38 | S/f reinforcement in R.C.C. work including all cost completeas per S.I.No-504 |
| 39 | Plaster work in 1:3 cement & f/sand mortar as per S.I.No-582 |
| 40 | One priming coat & Two of all distemper on new work including supply of all material labour & T&P etc. required for proper completion of the work (SL649+650) |
| 41 | Mild steel or Iron work in heavy sizes such as trusses ,built up gates , door frames , door records racks roof work gates etc . Wroughtto requiredfeom ,including drilling holes , rivetting or welding where necessary , and also including supply of steel bolts nuts wastage etc . and their steel , bolts fixing required for cimpletion of the work . as per Si No. 503 |
| 42 | Painting or varnishingon iron work in small area with one coat of ready mixed paint etc. SI. No (641+642) |
| 43 | Providing and laying cement concret 1:4:8 cement :4 find sand :8 graded brick ggregatet 40mm nominal size and incompletet,inciluding cost of form work in foundation and floors.SOR S No.275 |
| 44 | Supply and fixing of approved china white/coloured glazed tiles in flooring or dado laid with 1:3 cement and coarse sand mortar finished and jointed with white cement slurv etc |
| 45 | P/I rectified glazed ceramic wall tiles 300*300 size of first quality confirming to IS 15622 of approved make in colour(DSR11.36) |
| 46 | Providing and fixing CPVC pipe having thermal stability for hot and cold water including ety-15mm nominal dia pipe.As per DSR No.18.8.1 |
| 47 | 20 mm nominal dia pipe.As per DSR No 18.9.2 |
| 48 | 15mm nominal dia pipe.As per DSR No.18.9.3 |
| 49 | S/F of water steel tap |
| 50 | Providing and filling of OBB Brick ballast 25 mm of 40 mm |
| 51 | Providing and laying of CI Pipe |
| 52 | S/F of Aluminium Door |
AI Tender Summary
Tender Timeline
Aug 09, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 25, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender