Tender For Composite Works Electrical Instrumentation Civil For Negdcl Pipeline Connectivity Under Negg Project Of Iggl
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Aug 2025
0 days left
EMD
2.48 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
guwahati → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Composite Works Electrical Instrumentation Civil For Negdcl Pipeline Connectivity Under Negg Project Of Iggl
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Aug-2025 | Corrigendum 1 | Date | 21-Aug-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | SECTION:A- ELCTRICAL WORKS |
| 2 | Supply, installation, testing, commissioning of power distribution board (PDB) : |
| 3 | 415 V, 30 KA Single/Doublefront type indoor PDB consisting of bus bar chamber with Cu bus bar, cable alley, 160 Amp incomer TPN MCCB(with LSIG & Shunt trip for ESD) & 3 nos. 100 Amp TPN MCCB, 2 Nos 63 Amp TPN MCB, 2 Nos 32 Amp TPN MCB, 6 Nos 10/16 Amp DP MCB with timer (03 nos)/ without time (03 nos)outgoing complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per specification, auxiliariesetc complete in all respects as specified in technical specification, data sheet & SLD no MEC/23UU(Ph-II)/05/E9/E/1081A. All MCCBs shall have LSIG protection, RYB and ON, OFF TRIP indication. |
| 4 | Supply, installation, testing, commissioning of the complete earthing and lightning protection system, earth electrodes/ pit, earth main ring, earthing of electrical equipments, instrument panels, field instruments, process equipments and pipes/ flanges including all associated civil work with all material and labour as per specification and drawings approved by the Owner/Consultant. |
| 5 | Earth Pits- Copper plate Electrode with 6 mm thick chequered plate cover for telecom & instrumentation earthing |
| 6 | GI Strip (50X6) mm |
| 7 | GI Strip (25X3) mm |
| 8 | Copper Strip (25X3) mm |
| 9 | GI Wire (8mm- solid), Cu- wire rope (Min 8 mm dia solid) and all balance earthing material including copper strip (50 mm x 2 mm thick) jumper for flanges etc. as per the specification for all stations. |
| 10 | Advance maintenance free earthing system with 3mtr earth electrode of low carbon steel with 250 micron copper coating with carbon based backfill compound (Resitivity of compound shall be less than 1 ohm-m) as per IS 3043/IEEE-80. |
| 11 | Supply, laying, termination, testing and commissioning of 1.1kV grade XLPE insulated, PVC sheathed, FRLS power and control cables (conforming to IS:7098 and specification) of following sizes in trenches/ excavated under ground trench /trays, pulling through pipes and its proper sealing, cutting of paved area, roads etc. |
| 12 | 3.5x 120 mm2 A2XFY |
| 13 | 3.5x 95 mm2 A2XFY |
| 14 | 3.5x 25 mm2 2XFY |
| 15 | 4x 2.5 mm2 2XWY |
| 16 | 2.5 Sqmm Flame Retardant Low smoke(FRLSH) PVC Insulated Building wire |
| 17 | 4 Sqmm Flame Retardant Low smoke(FRLSH) PVC Insulated Building wire |
| 18 | 6 Sqmm Flame Retardant Low smoke(FRLSH) PVC Insulated Building wire |
| 19 | Supply, installation, testing, commissioning of lighting fixtures complete with mounting bracket, flame proof/non flame proof, control gear box as per the type of fixture, lamps, 4 way junction boxes etc. including civil work with pipe inserts for cables and connecting work, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge.Work to be completed in all respects. |
| 20 | Street lighting, integral flame proof well glass fixture (CMIFR approved for Zone-1/2 gas group IIA & IIB) with 72 W LED luminaire with flame proof control gear Model no. FLPW-1095 of Baliga make or equivalent) |
| 21 | Flame proof Integral flood lighting fixture (for 150W LED) on building/ structure/pole, lighting fixture type : FLPW-2595 of M/s Baliga make or equivalent |
| 22 | Street lighting pole 6mtr high GI octagonal pole (Type BOP-6030 of Bajaj make or equivalent) complete with bracket, GI clamps, FLP Cable glands, flame proof & weather proof (IP-55) junction boxes (4 way) as per standard drawing (MEC/SD/05/E9/77/04) & specification (MEC/TS/05/E9/077B). |
| 23 | Eye wash and safety shower system in barttery room. |
| 24 | Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specificationincludes PVC conduits in ceiling, complete wiring including flexible wire (FRLSH PVC), switch boxes & switches (ANCHOR ROMA make or equivalent), Multi strand Flexible FRLSH PVC insulated copper conductor wires/cables for following items (Wiring from DB to Switchboard shall be included in the point wiring)- |
| 25 | Light Point |
| 26 | Surface/ recess mounted LED light fixrure for ceilling/ false ceilling installation, Decorative type, Square shape Min 18W (type Havells or Equivelent make). |
| 27 | Wall mounted fan with electronic regulator ( Energy efficent, 50W, 400 mm sweep, 1300 rpm) etc complete in all respect for wall mounting |
| 28 | Industrial Flame proof LED light fitting for battery room, wall mounted, PESO approved (type EXTN2LT8-20 of CG make or equivalent). |
| 29 | Supply and laying of following sizes of class \"B\" G.I.Pipe in required length fixed on steel, concrete or similar sructure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc. small civil works, including all labour and materials complete as per approved drawingsand directions of Engineer-In-Charge. |
| 30 | 100 mm NB |
| 31 | 150 mm NB |
| 32 | Supply, Installation, Erection of following Hot Dip Galvanized Ladder/Perforated Typecable trays (as per IS 2629) including bends, tee, crosses,horizontal and vertical splices etc. as required including supply of all G.I hardwares, all labour and material as required as per standard drawings, specification and direction ofEngineer-in-charge |
| 33 | Ladder type, made from 50mm height and 2.5 mm thick sheet steel & galvanized (86 microns) of following sizes. |
| 34 | 150 mm wide |
| 35 | 300 mmwide |
| 36 | Perforated type, made from 50mm height and 2.5 mm thick sheet steel & galvanized (86 microns) of following sizes. |
| 37 | 150mm wide |
| 38 | 300mm wide |
| 39 | Erection Material |
| 40 | Supply, Fabrication and errection of MS base frame support for switch gear and bracket for misc. electrical equipment, cable and cable tray support out of roled MS section,pipes,plates etc including welding, bolting, reveting, supply of necessary anchor bolts and grouting etc supply of paints applying one coat of anti rust primer two finish coats of approved synthetic enamel paints including bracking walls, floors etc for structure as required including supply of all GI hardware materials including all labour and materials complete as required and the direction of Engineer-in-charge for all stations. |
| 41 | Supply and installation of the following including the supply of necessary clamp, bolts, rawl plugs etc. breaking and making good of walls, if required , and including all labour and materials complete as per directions of Engineer-In-Charge, applicable standards and Indian Electricity rules. |
| 42 | Shock hazard charts complete with frame and glass |
| 43 | First Aid Boxes |
| 44 | Carbon-di-oxide(CO2) type fire extinguisher 4.5 Kg capacity Complete with gunmetal valve conforming to IS : 3224 With ISI mark , Discharge horn with bend & wall fixing Bracket With Mfg. Test certificate |
| 45 | Caution boards (Danger, High Volatage) including supply of necessary clamps, bolts and other hardware. |
| 46 | Single Line Diagram complete in glass frame. |
| 47 | Supply and laying ofInsulating Mats 11kV grade (as per IS:15652 - 2006) of 1000mm width, required for maintenance of electrical equipment in substation as required including cutting to required shape in running length and including all labour and materials etc. complete and as per directions of Engineer-In-Charge as per applicable Indian or International standards and Indian Electricity Rules. |
| 48 | Supply and installation of electrical accessories including, cable tags, cable marker, Cu lugs, FLP double compressed brass cable glands,brass adaptar/reducers/nipples, fixing of metallic anchor fasteners for supporting of cable trays and misc. electrical switchgear including all labour and materials complete as required and as per directions of Engineer-In-Charge for all stations. |
| 49 | Air Conditioners |
| 50 | Supply, Installation, testing and commissioning of latest model (5 stars BEE certified inverter AC) min 1.8 T industrial split AC complete with remote, 5 KVA stablizer, 12 Hr timer, MS Stand for outdoor unit, Cu pipe etc. |
| 51 | Burried Trench |
| 52 | Excavation to required width and depth (in all types of soil including rock cutting, jungle / debris clearing whever required along the cable route) filling with 150 mmsand above and below cables and good quality approved bricks (75 mm thick) covering the cables through out the trench, back filling (after cable laying), and finally compacting as per tender specification and approved drawings, including one run of warning tape. |
| 53 | 300mm wide x 1000mm depth |
| 54 | 600mm wide x 1000mm depth |
| 55 | Sub-Total Section A |
| 56 | SECTION:B- CIVIL WORKS |
| 57 | PLATE LOAD TEST |
| 58 | Cyclic Plate Load Test at a depth of 1.5m in accordance with IS:1888 & IS:5249 including all equipment & accessories, digging of test pit and filling the pit with proper compaction after completion of the test. |
| 59 | DEMOLITION OF R.C.C./BRICKS/STONE MASONARY |
| 60 | Site clearance by demolition of R.C.C./PCC/Brickwork/Stone Masonry/Stone Soling, Flexible pavements etc. along with removing the debris and disposal of unserviceable material to any lead and staking of serviceable materials, handing over serviceable material to concerned department if requiredas per technical specifications and direction of Engineer-in-charge. |
| 61 | Note: |
| 62 | 1. Rate includes cost of all labour, tools, tackles, hire charges, royalties, levies, leads, loading/unloading, transportation, water, electric power, illumination etc. complete in all respects as per scope of work, detailed construction drawings, technical specifications and direction of Engineer-in-charge. |
| 63 | 2. Demolition of RCC/PCC/Brick Masonry/Road will be paid in NET CUM after deductions for air voidsas demolished. |
| 64 | EARTH WORK IN EXCAVATION AND BACKFILLING |
| 65 | Earthwork in excavation for foundations in ordinary soils including soft rock / disintegrated rock in both dry andwet conditions including pumping and bailing out surface and subsoil water, shoring, strutting,slush removal including backfilling in all positions in layers of 300mm at all heights and depths as per drawings and specifications wherever required, in Foundation pits and other places with excavated suitable surplus earth including reclaiming from spoil heaps kept within the plot including dressing and levelling, watering and mechanical compaction etc.,transporting surplus unserviceablesoilupto any lead and spreading in layers and as per specifications and direction of Engineer in charge.The Measurementfor payment shall be for the theoretical volume only and it shall bethe volume of the block ofthe excavation having maximum bottom dimension of thelevelling course/PCC asper drawing and to actual depth. |
| 66 | Note: |
| 67 | 1. The Contractor shall take into account in his rate, the provision for excess excavation required for necessary working space, cutting inslopes etc., which may be required for excavation and other allied works and refilling the side slopes and working space in layers as per requirement. |
| 68 | EARTH WORK IN FILLING |
| 69 | Controlled earth fillingwith good quality imported earth from approved source under floors and other places with special compaction to achieve dry density of 95% standard proctor density as per instruction of the Engineer at all heights/depths upto any lead transporting, depositing, compacting and dressing, trimming complete as desired in layers not exceeding 30cm including watering, consolidating by mechanical means as per specifications and instructions of the Engineer. |
| 70 | SAND FILLING |
| 71 | Supplying and filling approved quality coarse sand/M sand (Zone II or Zone III) in foundation or under floor, trenches, pits and other places, at all locations in layers of 150 mm thickness including watering and ramming, all lead, lift and depth complete as per drawing and specification and direction of the Engineer. |
| 72 | Note: |
| 73 | 1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, cost of sand, right of way, cess, and backfilling using sand in all conditions, etc. |
| 74 | PLAIN CEMENT CONCRETE |
| 75 | Supplying and laying plain cement concrete of grade 1:2:4 (M 15) with stone aggregate 20mm down grade (including shuttering if required) infoundations, floors, roof screed, aprons, pits, drains and other mass concrete works, steps, coping of wall, sill etc., at all depths and heights/levelsas per drawings, specifications and directions of the Engineer-in-charge. |
| 76 | Note: |
| 77 | Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials, OPC/PPC cement, shuttering in all conditions etc. with all bye works and sundry works. |
| 78 | Supplying and laying plain cement concrete of grade 1:3:6 (M 10) with stone aggregate 40mm down grade (including shuttering if required) in all levelling courses under foundations, mass concrete works,road works,chambers, trenches,floors and any other locations at all depths complete in all respects as per drawings, specifications and directions of the Engineer-in-charge. |
| 79 | Note: |
| 80 | Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials, OPC/PPC cement, shuttering in all conditions etc. with all bye works and sundry works. |
| 81 | REINFORCED CEMENT CONCRETE |
| 82 | Providing and Laying in position Machine batched and machine mixed Design mix/ Ready mixed for Reinforced Cement Concrete workof grade M-25 using 20mm down size graded aggregate at all depths and heights using cement content as per approved design mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of RMC as applicable, including cost of centering, shuttering and admixtures in recommended proportions as per IS: 9103 to accelerate/retard setting of concrete(improve workability without impairing strength and durability) but excluding cost of reinforcement as per direction of Engineer-in-charge. Mechanical mixers with Hopper along with Weigh Batcher shall also be permitted for use at site with the approval of Engineer-Incharge to produce Design Mix Concrete of specified grade. |
| 83 | Note: |
| 84 | 1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as,minimum 43 grade OPC cement/PPC cement including sulphate resistant cement if required, coarse and fine aggregates, admixtures, other minor construction materials, testing of concrete, curing etc. with all bye workscomplete. |
| 85 | 2. The reinforcement shall be paid separately vide respective item. |
| 86 | REINFORCEMENT STEEL |
| 87 | Supplying, Fabricating and Fixing in position TMT Grade Fe 500D reinforcement conforming toIS1786 at all levels and positions including the cost of transport, straightening, cutting, bending, cranking, welding, provision of necessary chairs and spacers, preparation of bar bending schedule and getting the same approved by EIC etc., complete as per drawings and specifications and including cost of binding wire, labour, testing etc., all completein all respects as per detailed construction drawings, technical specifications and direction of Engineer-in-charge. The chairs and spacer bars provided will not be measured for payment. |
| 88 | Note: |
| 89 | 1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as reinforcement steel, binding wire etc. with all bye works and sundry works complete. |
| 90 | 2. Chairs, Unauthorised Laps, Spacers, Binding wire, Wastage etc. shall be to contractor\"s account. |
| 91 | BRICK WORK |
| 92 | Providing and laying BRICK WORK straight or curved on plan to any radius using best quality bricks with frog/indent, conforming to sub-class A as per IS:1077 having crushing strength of not less than 50 kg/cm2 in cement mortar 1 :6 (1 Cement : 6 Coarse Sand)in all types of foundation and superstructure at all depths/heights including projections, pillars, parapets, ornamentals of any shape, cornices, all complete including cut work, curing, scaffolding,including filling of joints with Cement Mortar 1:6 and racking of joints, etc. as per specifications, drawings and directions of the Engineer. |
| 93 | Note: |
| 94 | Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement (OPC/PPC), bricks, finishes, bitumen, other minor construction materials, shuttering, staging, masonry work, painting with bitumen on faces in contact with soil etc. as per requirementwith all bye-works and sundry works complete as per drawings. |
| 95 | INSERTS |
| 96 | Supplying, Fabricating, Fixing at all levels and positions Steel embedments/ Insertslike Plates,Angle, Channels,Anchor boxes, MSpipe Sleeves includingthreading etc.,including two coats of approved quality Synthetic enamel paint over a primer coat on the exposedSurfaces wherevernecessary, complete as per Drawings, Specificationsand directions of theEngineer-in-charge. (Jigs, Templatesand Fixtureswillnot be paidseperately). |
| 97 | G.I.PIPES |
| 98 | Providing and fixingof following size of G.I. pipes (medium duty) as per IS 1239 complete with G.I. fittings and clamps including cutting by hack saw, bending by hydraulic machine, trenching and refilling etc. including all labour and material complete as per approved drawing and direction of EIC. |
| 99 | 100 mm nominal bore |
| 100 | 150 mm nominal bore |
| 101 | BOULDER SOLING |
| 102 | Providing and laying 150 mm thick stone boulder soling with stone boulders ofsize 90-120 mmincluding packing filling interstices with smaller size stones dry and wet consolidition with moorum as coarse aggregate in foundation, trenches,pavements including ramming, consolidating with mechanical means and tamping etc. completed as directed at the site (Compacted thickness shall be measured for payment) |
| 103 | PLASTERING |
| 104 | Providing and applying 15mm thick cement plaster 1 : 4 (1 cement : 4 medium coarse sand) smooth finish (1 neat coat of cement)with waterproofing compound at all depths & heights on faces of walls, pillars, projection, bands, etc., including raking out joints if any left out, necessary dabbing, curing, scaffolding complete at all heights as per specification and drawings. |
| 105 | Note: |
| 106 | Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement (OPC), coarse sand and other minor construction materials as per requirementwith all bye-works and sundry works complete as per drawings. |
| 107 | CONCRETE PAVEMENT |
| 108 | Providing and laying reinforced cement concrete pavement 150 mm thick in M-25 grade with 20 mm and down grade crushed stone aggregate in pavement, including earthwork in excavation, preparation of base (i.e. compacted subgrade, 200 thk sand and 100 thk PCC M-10 grade), leaving pockets if necessary, making recess, projections, fixing inserts conduit pipes (GI, PVC, HDPE, etc.) laying in alternate panels, filling the gaps between the panels with bitumen sand mix filler material etc., making slopes, finishing edges, leaving bars for pedestals & sleepers including providing sand fill isolation , shuttering, providing and fixing reinforcing steel, curing, chipping and modification works etc. as specified in any shape, thickness, position and finishing the top surface smooth as per requirement etc. all complete as per drawings, specifications and directions of the Engineer-in-charge. |
| 109 | 150mm thick in Pavements of Process Area (Type - I) |
| 110 | 150mm thick in Pavements of Approach Road (Type - II) |
| 111 | Note :- |
| 112 | 1.Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials, providing and fixing reinforcement steel, shuttering, earthwork in excavation and backfilling using serviceable earth in all conditions, preparation of base, etc. with all bye works and sundry works.Cost of works towards pipe supports & sleepers being raised from pavement is covered under respective RCC items. |
| 113 | PAVER BLOCK FLOORING |
| 114 | Supplying and placing in position as per approved pattern of Cement Concrete Inter locking/grass jointed paver block 60 mm thick of approved shape, rough finish, M-30 strength of approved brand laid over the sand bed of minimum 100 mm thick. The CC interlocking blocks to be of uniform Grey colour or as approved by EIC complete in all respects as per scope of work, detailed construction drawings, technical specifications and directions of the Engineer-in-charge. |
| 115 | Note :- |
| 116 | 1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such paver blocks,sand,earth work in excavation in cutting earth in all conditions, shutteringwith all bye works and sundry works. |
| 117 | 2.PCC below paver shall be paid separately vide respective item. |
| 118 | KERB STONE FIXING |
| 119 | Providing and fixing precast concrete Kerb stones (125 wide X 300 deep approx.) of M-30 grade or equivalent of approved make and shapeat or near ground level as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) including the cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) wherever required over 75 mm thick PCC M-10 levelling course, complete in all respects as per scope of work, detailed construction drawings, technical specifications and directions of the Engineer-In-Charge. |
| 120 | 1. Rate to include all labour, tools, tackles, factory manufactured & steam cured Kerb Stones, shuttering, transportation, water charges, earth work if any, PCC etc complete. |
| 121 | Sub-Total Section B |
| 122 | SECTION:C- STRUCTURAL WORKS |
| 123 | Supply, fabrication & erection of Steel structure |
| 124 | Supply, fabrication and erection of monorail beam, pipe supports, platforms, crossover structure, or any other structures required for works, etc. including surface preparation, painting as per specification, including loading, transportation and unloading delivery at erection site of all fabricated structures, storage and handling at site, site assembly and finally erection of structures at appropriate location, alignment and welding of all structures true to line, level, plumb and dimension. The work shall be completed in all respect as per drawings, technical specification and direction of the Engineer-in-Charge. (The cost & weight of MS bolts and nuts (permanent and service), washers, electrodes, putty, gases, shims, packs, cost of straightening of raw materials, Built up section at any shape, cutting of flats from plates and providing splices, paints, tools, plants, testing of materials, etc and all other consumables as required for the work shall be deemed to be included in the quoted rates.) |
| 125 | Providing and fixing of chain link fencing |
| 126 | Supply, fabrication and erection of structures such as angle iron post , Channel post,Strainer and strut,etc.with necessary holes for fixing the chain link fencing,site assembly and finally erection of structures at appropriate location including surface prepartion with painting as per specification, including 2.4m high G.I. Chain link fabric fencingmesh size 50x50x3.15 mm dia, with 0.6 m height barbed wire (type-A) as per IS:278-1978 shall be made from two strands of galvanized steel wire of nominal dia 2.5 mm twisted together fixed on angle iron posts with GI staples, turn buckles,all necessary fitting etc, including strengthening with 4 mm dia wire Nuts bolts and washer complete in all respects.All work as per Specification and drawings and as direction of the Engineer-In-Charge. (excluding foundation, Refer Tender drawing) |
| 127 | Providing and fixing of chain link fencing gates |
| 128 | Supply, fabrication and erection of structures such as angle iron post , Channel post,Strainer and strut,etc.with necessary holes for fixing the chain link fencing,site assembly and finally erection of structures at appropriate location including surface prepartion with painting as per specification,including 2.4m high G.I. Chain link fabric fencingmesh size 50x50x3.15 mm dia, with 0.6 m heigh barbed wire (type-A) as per IS:278-1978 shall be made from two strands of galvanized steel wire of nominal dia 2.5 mm twisted together fixed on angle iron posts with GI staples, turn buckles,all necessary fitting etc, including strengthening with 4 mm dia wire Nuts bolts and washer complete in all respects.All work as per Specification and drawings and as direction of the Engineer-In-Charge. (excluding foundation, Refer Tender drawing) |
| 129 | 2.0 M Wide gate |
| 130 | Supply, fabrication & erection of MS Gate |
| 131 | Supply, fabrication and fixing in position steel entrance gate (as per the design shown in the tender drawing) supply of raw materials, transportation and delivery at site, unloading, storage and handling at site, site assembly and finally erectionat appropriate locations.gates shall be fabricated out of channel and Sq Bar with all fixtures like MS Pivot,M.S sheet boxing ,locking arrangement, MS tower bolts, gate stopper, hold fast, MS wheel with ball bearing , MS tee bend to shape and embedded in the road surface for gate opening track , etc. including painting as per specification. The work is to be completed in all respect as per drawings and techanical specification and direction of the Engineer-in-Charge |
| 132 | 4.0 M Wide gate in two panels |
| 133 | Providing and fixing of chequered plate covers |
| 134 | Providing and fixing chequered plate in approved panel or over steel structure platform,cable and pipe trench including cutting, welding, hoisting, fixing in position,including painting as per specification, complete in all respectas per drawings , technical specifications and directions of the Engineer-In-Charge. |
| 135 | Notes:- |
| 136 | The quantities indicated are estimated values and hence are approximate. Final payment will be made based on actual quantities to be certified by the Purchaser. |
| 137 | The cost & weight of MS bolts (permanent and service), washers, electrodes, putty, gases, cost of straightening the raw materials, cutting of flats from plates and providing splices, paints, tools, plants, electric power,water.other consumables, as required for the work shall be deemed to be included in the quoted rates. |
| 138 | All handling and transport charges of raw materials and fabricated structures including double handling, as required, for completion of work in accordance with time schedule, are deemed be included in the quoted rates |
| 139 | Sub-Total Section C |
| 140 | SECTION:D- INSTRUMENTATION WORKS |
| 141 | FIELD INSTRUMENTS |
| 142 | Supply of Pressure Gauges as per tender document (inclusive of supply of necessary piping materials/tubings, dampeners (if required) alongwith all necessary valves & fittings,impulse lines/manifolds, complete in all respect as per the tender) |
| 143 | Installation, testing, calibration and commissioning of Pressure Gauges as per tender document (inclusive of necessary piping materials/tubings, dampeners (if required) alongwith all necessary valves & fittings,impulse lines/manifolds, complete in all respect as per the tender) |
| 144 | Supply of Pressure Transmitters as per tender document (inclusive of supply of yoke, supports for impulse lines (wherever required), SS manifolds/ SS impulse lines & SS valves & fittings with supports, complete in all respect as per the tender) |
| 145 | Installation, testing, calibration and commissioning of Pressure Transmitters as per tender document (inclusive of yoke, supports for impulse lines (wherever required), SS manifolds/ SS impulse lines & SS valves & fittings with supports, complete in all respect as per the tender) |
| 146 | Supply ofTemperature Transmitters as per tender document (inclusive of supply of yoke, supports, etc) , complete in all respect as per the tender |
| 147 | Installation, testing, calibration and commissioning ofTemperature Transmitters as per tender document (inclusive of yoke, supports, etc), complete in all respect as per the tender |
| 148 | Supply of RTD (Skin Type) as per tender document (inclusive of supply of mounting pad, yoke, supports, etc, complete in all respect as per the tender) |
| 149 | Installation, testing, calibration and commissioning of RTD (Skin Type) as per tender document (inclusive of mounting pad, yoke, supports, etc , complete in all respect as per the tender) |
| 150 | Design, Engineering and Supply of Fully wired Control Panel cum TIC Panel (Wall Mounted type, 1200 (mm) H x 800 (mm) W x 450 (mm) D) alongwith all accessories and Panel Mounted Instruments as indicated below, including supply of commissioning spares with special tools and tackles as required, as per tender Document but exclusive of supply of below indicated panel mounted items. All the signals of electrical, instrumentation, fire detection and alarm system, RTU/SCADA, CP, etc. are to be interfaced through TIC Panel and necessary TBs alongwith accessories shall be provided for the same. |
| 151 | Installation, testing and commissioning of Fully wired Control Panel cum TIC Panel (Wall Mounted type, 1200 (mm) H x 800 (mm) W x 450 (mm) D)alongwith all accessories and Panel Mounted Instruments as indicated below, including supply of commissioning spares with special tools and tackles as required, as per tender Document but exclusive of supply of below indicated panel mounted items. All the signals of electrical, instrumentation, fire detection and alarm system, RTU/SCADA, CP, etc. are to be interfaced through TIC Panel and necessary TBs alongwith accessories shall be provided for the same |
| 152 | Panel Mounted Items (rest of the items are to be included in above panels supply) |
| 153 | Supply of Barriers cum Signal Distribution Card |
| 154 | Installation, testing and commissioning of Barriers cum Signal Distribution Card |
| 155 | Supply of Digital Indicators |
| 156 | Installation, testing and commissioning of Digital Indicators |
| 157 | FREE ISSUE ITEMS |
| 158 | SS Tube Connection, Testing and Commissioning of Gas Actuated Ball Valves (AV) /HOV including the Supply and installation of SS tubes and fittings along with supports for impulse lines (wherever required),hydraulic testing, hydraulic oil (if required), painting of supports as per std, manifold/ isolation valves, sockolets etc as required for tubing of each Valve, as per the direction of Engineer-In Chargebut exclusive of supply of Valves with actuator. |
| 159 | Testing & Commissioning of Metering Skids (alongwith Metering Panels, free issued cables, etc.) including all manpower, tools & tackles, equipments, consumables, etc. required as per direction of Engineer-in-charge. Scope also includes installation of metering panel & laying of free issued cables. |
| 160 | Supply of Canopies fabricated out of powder coated MS for electronic transmitters including supply, fabrication of support and reflective painting. |
| 161 | Installation, testing and commissioning of Canopies fabricated out of powder coated MS for electronic transmitters including installation of canopy with support and reflective painting. |
| 162 | Supply, laying, testing of FRLS cables (control, signal, power, triad cables) including supply of all required cable glands (Explosion proof double compression type) and consumables like ferrules, clamps, PVC tubes, aluminium/SS tag plates etc., clamping , ferruling, glanding of the cables, termination at both ends, including shield/drain/ communication wire, providing/fixing of identifying tags and megger testing and loop testing . Supply and installation of GI pipes / Hume pipes (in road crossings, buildings, etc.) and PVC pipes (for crossing of electrical cables) is included in the scope of cable laying but exclusive of supply & erection of GI Perforated tray. |
| 163 | Supply of 1 P x 1.5 mm² (Type I), Signal Cable |
| 164 | Installation, testing and commissioning of 1 P x 1.5 mm² (Type I), Signal Cable |
| 165 | Supply of4C x 1.5 mm²- Quad Cable (Type-I) , RTD Cables |
| 166 | Installation, testing and commissioning of 4C x 1.5 mm²- Quad Cable (Type-I) , RTD Cables |
| 167 | Supply of 12C x 1.5 mm² ( Type - I ) , Control Cable |
| 168 | Installation, testing and commissioning of 12C x 1.5 mm² ( Type - I ) , Control Cable |
| 169 | Supply of 3C x 6 mm² Power Cable (Copper conductor) |
| 170 | Installation, testing and commissioning of 3C x 6 mm² Power Cable (Copper conductor) |
| 171 | Supply of Multi cable Transit blocks, including all accessories etc., for all the cables entering in control room (including 100% spares) |
| 172 | Installation , testing and commisioning of Multi cable Transit blocks, including all accessories etc., for all the cables entering in control room (including 100% spares) |
| 173 | Supply and erection of prefabricated perforated GI trays of thickness 2 mmincluding tees, bends and elbows, supply, fabrication and erection of required supports and painting of supports with one coat of primer as per IS:2074 and 2 coats of finished paint including supply of paint as per std. and direction of Engineer In-Charge. |
| 174 | Supply of 60 mm wide X 30 mm high |
| 175 | Installation, testing and commissioning of 60 mm wide X 30 mm high |
| 176 | Supply of 200 mm wide X 30 mm high |
| 177 | Installation, testing and commissioning of 200 mm wide X 30 mm high |
| 178 | Excavation of trenches for burying the cables, preparation of same for laying of cable, filling with river sand, laying of brick, back filling and compacting of the excavated earth, cable route markers, etc. as per specifications including supply of sand and bricks and removal of surplus earth as per instructions of Engineer-in-Charge. Size of Trench : 600 mm (Width) X 675 mm ( Depth) |
| 179 | EARTHING |
| 180 | Supply, Laying, testing and Termination of 8 SWG G.I. Wire from earth grid to Field instruments/JBs/Control Panel (in tray and conduits as required) and 4 sq. mm. PVC insulated armoured copper cable from earth pit to the earth bus bar (in trays/conduits/trenches as required) required for the complete station |
| 181 | Start up & Commissioning of complete terminal instruments of the station, including all labour, test equipments and other auxiliaries as required, tagging of all the instrumentation items including cables, etc., complete in all respects as per specifications/ drawings/ directions of Engineer-in-Charge. All necessary Testing and commissioning reports, as-built drawings etc., shall also be prepared and to be submitted to the purchaser/consultant |
| 182 | Sub-Total Section D |
| 183 | SECTION:E- ARCHITECTURAL WORKS |
| 184 | False ceiling |
| 185 | Metal Tiles False Ceiling |
| 186 | Providing and Fixing of Powder coated Plain Lay-in Falseceiling of approved makes and as per following specifications:24mm grid Wall angle of 24mmx24mmx0.40mm shall be screw fixed to brick wall/partition with the help of approved screws at 600mm centres.Then suspending Tgrid of 24mmx38mmx0.35mm of length 3600mm is hung with adjustable level clips 80x30x0.60mm & 4mm diameter GLLL rod which are connectted tosoffit cleat 37mmx27mmx1.6mm and 8mm dia 40mm long Anchor Fasteners @1200mm centres or as aproved from RCC Slab. The crss T of 24mmx32mmx0.35mm of 1200mm length shall be interlocked between main T of 24mmx32mmx0.35mm of 600mm length centrally between the 1200mm cross\"T\"s. 24mm Grid profiles should be rolled with GL steel (120 GSM& 230 MPa yield strength)having metal conforming to IS 277. Plain lay in ceiling Panels shall be Powder coated Galvanized steel 50 to 60 microns polyester paint,ceiling tiles of size 595mmx595mm(Norminal) having thickness of 0.5mm,lip5.5mm and Drop of 8mm .These tiles shall be placed into the above grid of size 600x600mm. |
| 187 | Gypsum Board False CeilingProviding and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, Coves, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting 12.5 mm thick tapered edge gypsum moisture resistant board |
| 188 | Providing and applying two coats of external emulsion paint of approvedshade, at all locations over and including a priming coat over wall surface, bands, parapet etc., including preparation of surface complete with all bye works complete as per specification and direction of the Engineer.Total = 1 Coat of Primer/Snowcem + 2 Coat of Emulsion PaintOne coat means painting the surface first with vertical stroke, followed by horizontal stroke. Each coat shall be allowed to dry before next one is applied. Further each coat shall be inspected and approved by the Site-in-charge before the subsequent coat is applied.The job to be executed as per attached technical specifications, job procedures etc. |
| 189 | Sub-Total Section E |
| 190 | Grand Total A+B+C+D+E |
| 191 | GST (CGST&SGST/UTGST or IGST) in percentage (%) on Total of SectionA + B + C+ D +E above |
AI Tender Summary
Tender Timeline
Aug 18, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 21, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 21, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 22, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender