Tender For Repair/Replacement Of Street Lights, Perimeter Lights, Bldgs Earthing And Lightening Protection Withallied Works At Age Charduar Areaunder Ge (N) Tezpur., Sonitpur-Assam

Tender For Repair/Replacement Of Street Lights, Perimeter Lights, Bldgs Earthing And Lightening Protection Withallied Works At Age Charduar Areaunder Ge (N) Tezpur.; 1 Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth in soft / loose soil and getting out for removing / laying of pipe /Cables etc complete all as specified. 2 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil complete all as specified and as directed. 3 Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. 4 M&L for river sand, washed and screened dry for cushioning to under ground cable in tenches below and around under ground cable including spreading and levelling complete as specified and directed. (Punned thickness only shall be measured and paid) 5 Supply and laying well burnt bricks sub class B in trenches for cable protection of U/G cable all as specified and directed by Engr-in-Charges. 6 Taking downthe existingdamage / unservicableLT under grund cable any description of the size 6 sqmm 2 core from trenchs /walls/poles/floorsetc and depositing where directed at sitecomplete all as specified and directed.(Note :- Excavationand earth work will be measured under replacement items) 7 Taking downthe existingdamage / unservicableLT under grund cable any description of the size 6 sqmm 4 core from trenchs /walls/poles/floorsetc and depositing where directed at sitecomplete all as specified and directed.(Note :- Excavationand earth work will be measured under replacement items) 8 Taking downthe existingdamage / unservicableLT under grund cable any description of the size 10 sqmm 4 core from trenchs /walls/poles/floorsetc and depositing where directed at sitecomplete all as specified and directed.(Note :- Excavationand earth work will be measured under replacement items) 9 Taking downthe existingdamage / unservicableLT under grund cable any description of the size 16 sqmm 4 core from trenchs /walls/poles/floorsetc and depositing where directed at sitecomplete all as specified and directed.(Note :- Excavationand earth work will be measured under replacement items) 10 Taking downthe existingdamage / unservicableLT under grund cable any description of the size 25 sqmm 3.5 core from trenchs /walls/poles/floorsetc and depositing where directed at sitecomplete all as specified and directed.(Note :- Excavationand earth work will be measured under replacement items) 11 Laying only the under ground cable any type obtained fromitems Nos 06 above in trench/wall/floor etc are connecting with suitable cable of size 06 sqmm 2 core lugs/sleevs etc complete all as specified and directed by Engr-in Charge 12 Laying only the under ground cable any type obtained fromitems Nos 07 above in trench/wall/floor etc are connecting with suitable cable of size 06 sqmm 4 core lugs/sleevs etc complete all as specified and directed by Engr-in Charge 13 Laying only the under ground cable any type obtained fromitems Nos 08 above in trench/wall/floor etc are connecting with suitable cable of size 10 sqmm 4 core lugs/sleevs etc complete all as specified and directed by Engr-in Charge 14 Laying only the under ground cable any type obtained fromitems Nos 09 above in trench/wall/floor etc are connecting with suitable cable of size 16 sqmm 4 core lugs/sleevs etc complete all as specified and directed by Engr-in Charge 15 Laying only the under ground cable any type obtained fromitems Nos 10 above in trench/wall/floor etc are connecting with suitable cable of size 25 sqmm 4 core lugs/sleevs etc complete all as specified and directed by Engr-in Charge 16 Supply & Lay underground XLPE insulated armoured LT UG electric cable with aluminium conductor 1100V grade in trenches fixed on wall (or) passing through pipes/in floors connecting up testing and commissioning of size 06 sqmm 2 corecomplete all as specified and directed by Engr-in Charge . 17 Supply & Lay underground XLPE insulated armoured LT UG electric cable with aluminium conductor 1100V grade in trenches fixed on wall (or) passing through pipes/in floors connecting up testing and commissioning of size 06 sqmm 4 corecomplete all as specified and directed by Engr-in Charge . 18 Supply & Lay underground XLPE insulated armoured LT UG electric cable with aluminium conductor 1100V grade in trenches fixed on wall (or) passing through pipes/in floors connecting up testing and commissioning of size 10 sqmm 4 corecomplete all as specified and directed by Engr-in Charge . 19 Supply & Lay underground XLPE insulated armoured LT UG electric cable with aluminium conductor 1100V grade in trenches fixed on wall (or) passing through pipes/in floors connecting up testing and commissioning of size 16 sqmm 4 corecomplete all as specified and directed by Engr-in Charge. (Note : Including nacessary excavation and clamp on wall with proper screw complete) 20 Supply & Lay underground XLPE insulated armoured LT UG electric cable with aluminium conductor 1100V grade in trenches fixed on wall (or) passing through pipes/in floors connecting up testing and commissioning of size 25 sqmm 4 corecomplete all as specified and directed by Engr-in Charge . 21 Supply and fixing in replacement of 50 mm bore GI pipe, light grade with all fittings, in crossing road/path or in pole/wall up to junction box/DBs/Main switch board etc including necessary clamping etc. complete all as specified and as directed by Engineer-in-Charge. 22 Supply and fixing in replacement of 40 mm nominal bore, light grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. 23 Supply and fixing in replacement of in trenches 25 mm nominal bore, light grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. 24 Supply and fixing in replacement of straight through heat shrink joint kit for PVC/XLPE LT UG cable forsizes 10 to 16 sqmm 2/4 core complete including taking down andall as specified and directed 25 Supply and fixing in replacement of straight through heat shrink joint kit for PVC/XLPE LT UG cable for 25 to 50 sqmm 3.5/4 core complete all as specified and directed by Engr-in Charge. 26 S&F sub main wiringcomplete with two runs of 1.5 sqmmPVC insulatedunsheathed single core multistrand copper conductorcable of 1100 volts grade drawnthrough new non metalic rigid PVC casing capping onwall alongwith accessories fixed on walls/floors/ceilingwith one run of 1.5 sqmm PVC insulatedunsheathed copperconductorcable as earth continuity conductor including taking down existing sheet complete all as specified and directed. Note:- Two runs of PVCinsulatedcable 1.5 sqmm+ one run 1.5 sqmmof earth wire and one run of conduit including accessories shall be measured as one length. 27 Supply and fixing in replacement of ceiling rose , polycarbonate, isolated bodywith 2 to 3 terminals and including taking down old u/s complete all as specified and directed. 28 Supply and fixing in replacement of MCB distribution board made ofCRCA sheet, powder coatedpaint comforming of IS 13032, singledoor fixed in switch boards/wall at various places of capacity 240volt 2 way MCB DB, SPNto IP 38 protection complete all as specified and directed by Engr-in Charge . 29 Supply and fixing in replacement of MCB of rating 240 Volts, MCB5-32 Amp B curbe 10 KAcompleteall as specified and directed by Engr-in Charge 30 Supply and fixing in replacement of street light Junction boxPVCwith operation suitable for accommodating and including heavy duty PVC connector block of 30 amps capacitythree phase with one number single poleMCB 06 Amps complete including fixing to pole with suitable brackets, bolts/nuts in connecting cable in testing completeincluding taking down and all specified and directed 31 Taking down the existingmounted LED security lights of gate lights/flood lights/ground lights of any size etc in carrying out repairs including checkingluminousreplacement of defective spares parts andchecking all connection to make the fitting serviceable including replacement of connection while from junction box to fittings and rectifying the same after attending repairs complete all as specified and directed Note: Spare parts requires for making the lights will be measure and paid relevenat item only 32 Supply only LED Drived25 wattsas per sample on siterequirementcomnplete all as specified and directed 33 Supply only LED Drived45/60 as per sample on site requirementwatts comnplete all as specified and directed 34 Supply only 1.5 sqmm3 core copper codectormultsand cablecomnplete all as specified and directed 35 Supply only 15 mm PVC pipe with suitable clamp and nuts/boltscomnplete all as specified and directed 36 Supply and fixing in replacement of 25 W new generation energy saving environmental friendly long life versalile pressure die castaluminium IP-66Bldg security lightwith high power LED as light source complete all as specified and as directed by the Engineer-in-Charge. 37 Supply and fixing in replacement of 45 W new generation energy saving environmental friendly long life versalile pressure die castaluminium IP-66Bldg security lightwith high power LED as light source complete all as specified and as directed by the Engineer-in-Charge. 38 Supply and fixing in replacement of 120W new generation energy saving environmental friendly long life versalile pressure die castaluminium IP-66Bldg flood light for high mastlightwith high power LED as light source complete all as specified and as directed by the Engineer-in-Charge. 39 Supply and fixing in replacement of new generation energy saving garden light 8 W environmental friendly long life aesthetically desiged aluminium landscape luminirefor diffused lighting with high power LED as light source completeall as specified and as directed by the Engineer-in-Charge. 40 Supply, fix, test and commissioningin replacement of LEDPost top laternluminaries outdoor type 60 Watts new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver suitable for operation on AC single phase 220-240 Volts, 50 HZ supply, including provision of two single core 1.5sqmm copper conductor PVC insulated, 1100 Volts, cable not less than 8 meter long etc, connectiing from junction boxes of poles completeall as directed by Engr-in-Charge. 41 Supply, fix, test and commissioningin replacement of LEDPost top laternluminaries outdoor type 20 Watts new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver suitable for operation on AC single phase 220-240 Volts, 50 HZ supply, including provision of two single core 1.5sqmm copper conductor PVC insulated, 1100 Volts, cable not less than 8 meter long etc, connectiing from junction boxes of poles completeall as directed by Engr-in-Charge. 42 Supply and fixing in replacement of bracket for single street lightfittingwith GI pipe medium grade 40 mm dia 2 m long bend to shape and double clamped with fabricated MS clamps as directed and fixed out side wall with bolts and nuts including painting old unsv taking down complete all as specified and directed by Engr-in Charge 43 Supply and fixing in replacement of Weather proof cablewith aluminium conductor 1100V grade of size10sqmm 2 corecompleteincluding taking down andall as specified and directed by Engr-in Charge . 44 Earthing complete with galvanisedsteel earth plate electrode of size60cm x 60cm x6.3 mm thick burried directly in ground( earth pit not less than 2.25 m deep below the normal groungnd level) with top edgee of the plate not less than 1.5m below normal GL connected to GI earth strip of size 25x4mm by means ofbolts, nuts, check nuts washers of GI or steel all asshown in electrical plate No-5 of SSR Part I connected to machanery/equipments installed power house/sub station all as specified including testing on completion. Note No-1the unit rate shall also include for excavation earth work in any type of soil PCC (1:3:6) type C1 pit RCC 1:2:4 type B-1 cover reinforced with 8 mm dia CTD bars @ 150mm C/C both ways funnel with 15mm bore GI watering pipe 20mm dia bore GI protection pipe wire mesh and copper lugs complete in addition to item No 1(a) to (e) of preamble ( Notes) Under sub heading earthing specified on SI page NO-389 of SSR Part-II 2004. 45 S&F for 60 W new gereration energy saving environmental friendly long life versalile presure die cast aluminium IP-66 Bldg security light with high power LED as light source complete all as specified and as directed by the Engineer-in-Charge.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	23-08-2025	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	30-08-2025

INR 500 /-

INR 46 Lakhs /-