Tender For Repair/ Maintenance Of Power Street Lights, Internal Electrification And Lt Services At Sess Palayamkottai Under Ge Tirunelveli; 1 Taking down carefully copper/aluminium point wiring (light, fan, socket and power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc. 2 Material and labour for Point wiring with two single core 1100 V grade FRLSH insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor FRLSH drawn through existing PVC conduit and making good to disturbed surfaces in wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLSH multi stranded copper conductor and connected to all metal boxes and common earth dollyor light/ fan etc. complete all as specified and directed. 3 All as per item no 2 above but for One 3 pin 5 Amps switch socket combination on independent board with other switches, with cables 1.5 Sqmm size. 4 All as per item no 2 above but for One 3 pin 5 Amps switch socket combination on the same board with other switches, with cables 1.5 Sqmm size. 5 All as per Item No. 107 above, but using 2.5 sqmm FRLSH single core multi stranded copper conductor cable existing conduit and make good disturbed surfaces and 2.5 Sqmm FRLSH copper earth wire cablefor One 5 pin, 15 Amps Multi purpose switch socket combination on independent board. 6 Supply and Fixing modular switch 1 way 6 amps one module complete all as specified and as directed. 7 Supply and Fixing modular switch 1 way 16 amps one module complete all as specified and as directed. 8 Supply and Fixing modular socket 6A 2/3 pin combined 2 module complete all as specified and as directed. 9 Supply and Fixing modular socket 6A / 16A - 2/3 pin combined 2 module complete all as specified and as directed. 10 Supply and fixing in repairs Bell push, AC, 230 V flush type single pole, 5 Amps complete all as specified and directed. 11 Supply and Fix in repairs DING DONG bell AC 240 V single pole 50 Hz and connecting up complete all as specified and directed. 12 Supply and Fixing modular fan step regulator upto 120W complete all as specified and directed. 13 Supply and Fix in repairs Ceiling rose 3 terminals, surface Bakelite 65 x 50mm complete all as specified and directed. 14 Material and labour sub main wiring with two single core 1100 V grade conforming to IS 694 PVC insulated unsheathed cables 4 Sq mm FRLSH multi stranded copper conductor drawn through and incl 25 mm dia non metallic PVC rigid conduit and conduit accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 4 sqmm FRLSH copper wire earth continuity conductor including taking down old unserviceable sub main wiring complete all as specified and directed by Engr-in-Charge. Note : Three runs of 4 sqmm cable with one run of PVC conduit shall be measured as one run. 15 Supply and Fix in repairs Sheet metal enclosures for DBs single pole 8 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement complete all as specified and directed. 16 Supply and Fix in repairs Sheet metal enclosures, double door, MCB DB, 4 way, TPN, AC 415 Volts complete all as specified and directed. 17 Supply and Fix Sheet metal enclosures Vertical TPN DB 4 way suitable for MCCB incomer 100Amp, double door,TPN, AC 415 Volts complete all as specified and directed. 18 Supply and Fix in repairs MCCB TP, AC 415 Volts 100 Amps 16KA, 50Hz C curve complete all as specified and directed. 19 Supply and Fix in repairs MCB FP, AC 415 Volts 40/63 Amps 10KA, 50Hz C curve complete all as specified and directed. 20 Supply and Fix in repairs MCB DP, AC 240 Volts 32 Amps 10KA, 50Hz C curve complete all as specified and directed. 21 Supply and Fix in repairs MCB SP 240 V, 6A to 32 Amps 10KA, 50Hz C curve 10KA, 50Hz C curve complete all as specified and directed. 22 Supply and Fix in repairs RCBO DP, AC 240 Volts 25 Amps 100mA, 50Hz C curve complete all as specified and directed. 23 Supply and fix in repairs LEDwhite light batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver 20 watt box type complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting with PVC round block 02 nos for mounting etc complete all as specified and as directed. 24 Supply and fix LED energy saving surface mounted decorative oval bulk head light comprising of high brightness 10W, 6000K LEDscomplete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. 25 Supply and fix in repairs LED light fitting surface mounted type 2 feet x 10W LEDcomplete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. 26 Supply and fix in repairs LED square light luminaries fitting surface mounted type 18 W 1ft x 1 ft LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. 27 Supply and fixing Recess mounting flat panel 36 Watt LED fitting 2x2 feet with flat panel to enhance the, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, complete incl removal of old unsv fitting all as directed by Engineer-in-charge. 28 Supply and fixing Surface/Suspended mounting flat panel 36 Watt LED fitting 2x2 feet with flat panel to enhance the, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, complete incl removal of old unsv fitting all as directed by Engineer-in-charge. 29 Supply and fix LED 1x4 feet, 36 Watt, Surface/suspended mounted light fitting Environmental friendly, new generation, aesthetically designed, ultra modern with high transmitive diffuser suitable for indoor spaces all as specified and directed. 30 Supply and fixing Recess mounting round flat panel 12 Watt (6 inch) LED fittingwith Al die-cast body, finish with drop down diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation, complete with all accessories internally prewired and necessary mounting/ fixing arrangements, including connection complete removal of old unsv fitting all as directed by Engineer-in-charge. 31 Supply and fixing Recess mounting round flat panel 12 Watt(8 inch) LED fittingwith Al die-cast body, finish with drop down diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation, complete with all accessories internally prewired and necessary mounting/ fixing arrangements, including connection complete removal of old unsv fitting all as directed by Engineer-in-charge. 32 Supply and fix in repairs LED Security light fitting 25 W LED (1800 Lumen) complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary bracket complete all as specified and as directed. 33 Supply and fix LED flood light luminaries, 100 W, 12000lumen output with toughened glass and individual LED with secondary lens optics with IP 66 ingress protection, 4 KV inbuilt surge protection with lumen efficiency 120 lm/W, made out of pre die cast housing, with manufacturers name embossed in body including 3 core flexible conductor cable for light connection complete all as specified and directed. 34 Supply and fix LED flood light luminaries, 210 W, 12000lumen output with toughened glass and individual LED with secondary lens optics with IP 66 ingress protection, 4 KV inbuilt surge protection with lumen efficiency 120 lm/W, made out of pre die cast housing, with manufacturers name embossed in body including 3 core flexible conductor cable for light connection complete all as specified and directed. 35 Supply and fix in repairs Flame retardant material plastic surface box 2 module with front plate for housing switch/ socket complete all specified and as directed. Make :HAVELLS/ INDOASIAN/ANCHOR or equivalent. 36 Supply and fix in repairs Flame retardant material plastic surface box 3 module with front plate for housing switch/ socket complete all specified and as directed. Make :HAVELLS/ INDOASIAN/ANCHOR or equivalent. 37 Supply and fix capacitor 2.5 mfd suitable for ceiling fan complete all as specified and directed. 38 Taking down geyser of any make/ type and any capacity after disconnecting the water and electric line connections from any height, bringing down to floor, dismantling the Geyser and overhauling by means of repair/replacement of the defective spares, cleaning externally and internally re-assembling the geyser, fixing in same position and testingfor satisfactory working etc complete.Note:Replacement of defective spares shall be measured and paid under relevant item separately. 39 Supply only Neon lamp indicator (Green and Red) 40 Supply only Bottom flange with inlet and outlet pipe (Apparatus plate) 41 Supply only Thermostat conforming to IS 3017 42 Supply only Flexible connection pipe set of two for cold and hot water 43 Supply only Heating element 2.0 KW 44 Supply Syphon assembly 45 Supply and fix 16A Modular switch SP 1 way with indicator complete all as specified and as directed. 46 Taking down ceiling fan 1200mm/1400mm sweep from any height and bringing down to floor, dismantling the ceiling fan and overhauling by means of replacing defective ball bearing, bushes, split pins, grease, packing, winding and cleaning externally, re-assembling the ceiling fan and checking, refixing in its position complete all as specified and directed.Note: (i) Rewinding, replacement of bearing and capacitors shall be measured and paid separately.(ii) All other petty repairs used for this work shall be included in the quoted rate. 47 All as per item No.46 but for exhaust fan 250/300mm including replacing of rusted nut and bolts complete all as specified and directed. 48 Supply and fix ball bearing suitable for any sweep ceiling fan complete all as specified and directed. 49 Material and labour for rewinding with super enameled copper wire including varnishing, drying and connection complete all as specified and directed. 50 Taking down wall mounted fan 300/450 mm sweep from any height and bringing down to floor, dismantling the wall mounted fan and overhauling by means of replacing defective ball bearing, bushes, split pins, grease, packing, winding and cleaning externally, re-assembling the wall mounted fan and checking, refixing in its position complete all as specified and directed. 51 Supply and fix PVC casing and capping, Size 20 X 12 mm capping accessories including fixing in surfaces in wall/roof/ceiling where required complete with screws and clamps complete all as specified and directed by Engr-in-charge. 52 Material and labour for SPN enclosure with two pin and earth plug and socket with 240 volts 20 Amp SPMCB, complete all as specified and directed by Engr-in charge. 53 Supply and fix in repairs Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3-4 KVA complete all as specified and directed by Engineer-in-Charge.(Note: Voltage stabilizer to be deposited after taking down to MES Store.) 54 Supply and fix 80 x 40 mm PVC Cable trunking and channel duct rectangular shape, ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed by Engr-in charge. 55 Supply and fix wall mounted fan 400mm sweep, 220 Volts, 50 Hz including fixing arrangements and making of hole and make good to the disturbed surface, air delivery 105 CMM, all as specified and directed..(Note: Old wall mounted fan to be deposited after taking down to MES Store.) 56 Excavation in trenches n.exc 1.5 M wide and n. exc 1.5 M depth and getting out in hard/dense soil for removing / taking out burnt cables complete all specified and as directed. 57 Returning, filling in incl spreading leveling, watering and well ramming in layers n.exc.25cm thick complete all specified and as directed. 58 Removing excavated material to a distance n.exc 50 M and depositing where directed at a level n.exc 1.5 M above the starting point complete all specified and as directed. 59 Spreading riddled earth in trenches for cable cushioning complete all as specified and directed.Note: Punned thickness only shall be measured and paid. 60 Supply and lay burnt bricksof old size sub-class B for cable protection all as directed & as specified. 61 Supply and fix LED flood light luminaries, 100 W, 12000lumen output with toughened glass and individual LED with secondary lens optics with IP 66 ingress protection, 4 KV inbuilt surge protection with lumen efficiency 120 lm/W, made out of pre die cast housing, with manufacturers name embossed in body including 3 core flexible conductor cable for light connection complete all as specified and directed. 62 Supply and fix LED flood light luminaries, 210 W, 12000lumen output with toughened glass and individual LED with secondary lens optics with IP 66 ingress protection, 4 KV inbuilt surge protection with lumen efficiency 120 lm/W, made out of pre die cast housing, with manufacturers name embossed in body including 3 core flexible conductor cable for light connection complete all as specified and directed. 63 Supply and fix LED street light luminaries, 90 W, with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection, 4 KV inbuilt surge protection with lumen efficiency 120 lm/W, made out of pre die cast housing, with manufacturers name embossed in body including 3 core flexible conductor cable for light connection complete all as specified and directed. 64 Supply and fix LED street light luminaries, 60 W, with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection, 4 KV inbuilt surge protection with lumen efficiency 120 lm/W, made out of pre die cast housing, with manufacturers name embossed in body including 3 core flexible conductor cable for light connection complete all as specified and directed. 65 Supply and fix LED bollard with opal acrylic diffuser floor mounted 9 W,warm white, 3000 K, IP 66 degree of protection including excavation, foundation and PCC work complete all as specified and directed. 66 Supply and fix Round LED decorative Pole light 50W for street420mm ring dia Aluminium casting material, Poly carbonate diffuser, 3000 K, IP 66 degree of protection including all fittings complete all as specified and directed. 67 Supply and fix 3 pole power contactor, ML 3 type, AC 440 Volts, 3 phase, coil voltage 440 volts, 40 Amps in the existing street light control switch box.Make : L & T cat part No S90721 or equivalent in BCH / Siemens make. 68 Supply and fixing IP 66 modular box made of FRP / impact resistance plastic & heat resistant materialsof size 155x210x92 mm, connector terminal block 4 pole 16 A capacity and fixing to the street light or post top light pole with suitable sizes of clamps, nuts and bolts complete all as specified and directed. 69 Material and labour fortrenchless boring of road, pavement, hard standing without damaging outer surface including making good disturbed surface with cement mortar complete all as specified and directed.. 70 Checking and testing for serviceability of street light/ flood light at Pole, removing oxide from contacts of OH/ connectors, refreshing the connection of street light supply, replacement of connecting cable including checking serviceability, changing of time of street light timer as specified with respect to seasons, checking for fault of UG cable/ OH/ light fitting with help of required tools all as specified and directed. 71 Testing and taking out old unserviceable Moulded Case Circuit Breakers from the existing feeder pillar box and replacement with new MCCB including connecting the incoming and out going cables using suitable cable glands and jumpers/cable with the bus bar of following capacity complete as specified and directed by Engr-in-Charge. 72 (a) MCCB4 pole 250 Amps 36 KA. 73 (b) MCCB4 pole 200 Amps 36 KA. 74 (c) MCCB4 pole 160 Amps 36 KA 75 (d) MCCB4 pole 100 Amps 25 KA 76 (e) MCCB4 pole 63 Amps 25 KA 77 Testing and taking out old unserviceable Miniature Circuit Breakers from the existing feeder pillar box and replacement with new MCB including connecting the incoming and out going cables using suitable cable lugs and connector with the bus bar of following capacity complete as specified and directed by Engr-in-Charge. 78 (a) MCB TP/4P, 32 Amp, 10 KA, C Series 79 (b) MCB TPN 40-100 Amp, 10 KA, C Series 80 (c) MCB SPN 32 Amp, 10 KA, C Series 81 (d) MCB SP 6-32 Amp, 10 KA, C Series 82 Material and labour for opening thecover of LT Panel, checking for tightness of all connections/ joints, cleaning dust and dirt from bus bar, checking for ACB 1600 A, 440V, 4P, dismantling, checking servicing of fixed and moving contacts, repair and replacement of fixed copper terminal/contacts (male and female ), insulation tubes including other connected items to functional of ACB including panel board , lamp indicators , cleaning the fixed and moving contact inside the ACBs properly , checking of EDO/MDO mechanism, servicing and greasing all movable mechanism , replacement of defective fuses , wiring, shunt coil, trip coil etc and reassembling and testing and serviceability check complete all as specified and directed by Engineer-in-Charge and manufacturer instructions. 83 Taking up old unserviceable UG cable and Supply, laying LT UG cable, 1100 volts grade, XLPEinsulated and sheathed, armoured, multistranded, heavy duty electric cable with aluminium conductor laid in trenches, ducts, on poles, walls, through pipes etc including identification tags over on cable complete for the following sizes including cable glands on both side terminations where necessary complete all as specified and directed by Engr-in-Charge. 84 (a) 4 core 10 Sqmm 85 (b) 4 core 16 Sqmm 86 (c) 4 core 25 Sqmm 87 (d) 3.5 core 35 Sqmm 88 (e) 3.5 core 95 Sqmm 89 (f) 3.5 core 150 Sqmm 90 (g) 3.5 core 185 Sqmm 91 Material and labour for repair to LT panel door with repair/ replacement of hinges, welding, replacement of defective packing/ rubber bidding of panel etc.including fabrication of any type and making good the disturbed surfaces at site with powder coating paint complete all as specified and directed by Engr-in-charge. 92 Supply and fix in repair230V Control and Power on indication lamp complete of existing make all as specified and directed. 93 Supply and fix in repair selector switch 16 Amp 2 position complete of existing make all as specified and directed. 94 Supply and fix in repair breaker control switch complete of existing make all as specified and directed. 95 Supply and fix in repair spring charging motor for ACB of existing make complete all as specified and directed. 96 Supply and fix in repair fixed arcing contact for ACB of existing make complete all as specified and directed. 97 Supply and fix in repair moving arcing contact for ACB of existing make complete all as specified and directed. 98 Supply and fix in repair under voltage release coil, 240 V for ACB of existing make complete all as specified and directed. 99 Material and labour for in repair checking of shunt release coil and repair/ replacement of shunt release coil for ACB as per sample, complete all as specified and directed by Engr-in-Charge. 100 Supply and fix in repairclosing coil, 24 V for ACB of existing make complete all as specified and directed. 101 Supply and fix in repair motor limit switch for ACB of existing make complete all as specified and directed. 102 Supply and fix in repair jaw contact male & female for ACB of existing make complete all as specified and directed. 103 Supply and fix in repair cradle assembly for ACB of existing make complete all as specified and directed. 104 Supply and fix in repairs Energy meter 3 phase, of accuracy class 1.0, input voltage measurement 50-520 Volt, AC, flush mounting type complete all as specified and as directed. 105 Supply and fix in repairs Voltmeter 3 phase, of accuracy class 1.0, input voltage measurement 50-520 Volt, AC, flush mounting type complete all as specified and as directed. 106 Supply and fix in repairs Ammeter 3 phase, of accuracy class 1.0, AC, flush mounting type complete all as specified and as directed. 107 Material and labour for opening the cover of APFC Panel, checking for tightness of all connections/ joints, cleaning dust and dirt from bus bar, checking for capacitor bank 100 KVAR, checking and servicing of metal plates, repair and replacement of external terminals, replacement of dielectric material ,repair/replacement of incoming MCCBs reassembling and testing and serviceability check complete all as specified and directed by Engineer-in-Charge and manufacturer instructions. 108 Material and labour forB check & maint of 750 KVA DG set as per the recommendation of manufacturer including replacement of necessary recommended Lub oil and fuel oil filters, O rings, necessary gaskets, clamp nuts, ball washers, adjustment of speed governor, cleaning of exhaust pipe and air cleaner, servicing of turbo charger, servicing to control wiring etc completeall as directed and specified by Engineer-In-Charge. Note :-(a)The rate quoted deemed to include all materials required for B checking by authorized dealer such as replacement of (i) Element, Lub Oil Filter (ii) Fuel Filter and ring Kit(iii) Super BYP. Filter element kit(iv) Seal, O Ring(v) Premium blue 210 Liter (b) Required T& P shall be arranged by the Contractor at site. 109 Material and labour forC check & maint of 750 KVA DG set as per the recommendation of manufacturer including replacement of necessary recommended Lub oil and fuel oil filters, O rings, necessary gaskets, clamp nuts, ball washers, adjustment of speed governor, cleaning of exhaust pipe and air cleaner, servicing of turbo charger, servicing to control wiring etc completeall as directed and specified by Engineer-In-Charge. Note :-(a)The rate quoted deemed to include all materials required for B checking by authorized dealer such as replacement of (i) Element, Lub Oil Filter (ii) Fuel Filter and ring Kit(iii) Super BYP Filter element kit(iv) Seal, O Ring(v) Premium blue 210 Liter (vi) Inhibitor corrosion 205 Ltrs(vii) Air cleaner element(viii) Element Air cleaner (secondary) (ix) Strip test(x) Rocker lever cover gasket(b) Required T& P shall be arranged by the Contractor at site. 110 Supply and Fix 200Ah Battery for 750 KVA DG set s specified and directed by Engr-in-Charge. 111 Supply and fix in repairs Battery terminal heavy duty 1 mtr long standard copper cable with brass clamps, bolts, nuts, washers etc.complete all as specified and as directed. 112 Supply only Distilled water suitable for DG Set complete all as specified and as directed. 113 Supply only Engine oil SAE 15W40 high quality suitable for DG set .Make : Servo Super / Gulf Leypower XLL Diesel Engine Oil 114 Supply only Coolant oil heavy duty suitable forDG set complete all as specified and as directed.
