Repair To Path, Drain, Gates, Boundary Wall, Plain Cement Concrete Hard Standing And Other Miscellaneous Works At Vayusena Nagar, Nagpur; 1 Demolition brick work or stone/ boulder masnory, built in cement mortor including all quoins , pillars etc, all as specified and as directed. 2 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 3 Dismantling of fencing wire mesh, any type complete all as specified and directed. 4 Excavation in trenches n.exc 1.50 m wide & n.exc 1.50 m deep for foundation etc or for shafts wells cesspits ,manhole pier holes etc n exc 10 sqm on plan and n exc 1.5 m depth and getting in hard/dense soil complete all as specified and directed. 5 Material and labour forCement Concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) in foundation, sub base, below paver block, filling and mass concrete etc complete all as specified and as directed. 6 Material and labour forBrick work with fly ash old size bricks, straight or curved on plan exc 6 m mean radius built inCM 1:6complete all as specified and directed. 7 Material and labour for providing cement concrete type B1 (1:2:4) using 20 mm graded aggregate ,in lintel upto 1.5m clear span ,cills,steps, seismic and other similar bands, plinth courses string courses parapets and railing upto 60 cm height copings, kneelers, apex stones, bed plates and similar complete all as specified and directed. 8 Taking down cement plaster on brick or concrete surfaces on wall etc including racking out joint, hacking for key,scrubbing down with water etc complete all as specified and directed. 9 Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement but with water proofing compound @3% weight of cement etc complete all as secified and as directed. 10 Supply only water proofing compound complete all as specified and directed. 11 Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement paint over a coat of alkali resistant primer complete all as secified and as directed. 12 Material and labour for preparation of newly plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company DepotTinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed at any height incuding necessary scaffolding if required at site complete all as secified and as directed.Note :- Shade and pattern of the colour to be approved by GE. 13 Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm for any types of soil complete all as secified and as directed. 14 Removing excavated material (soils) exc. 250 m but n exc. 500 m and depositing where directed complete all as secified and as directed. 15 Material and labour fo mild steel work as in posts or struts of any frame work in fencing including cutting tops to shape as directed drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as secified and as directed. 16 Material and labour for preparation of new iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as secified and as directed. 17 Supply and fixingGalvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured) complete all as secified and as directed. 18 Supply and fixingin repair of hot dip galvanised punched type concertina coil of loop dia 1050 mm (dia of coil when upstretched) fixed to angle post, strut, barbed wire and tying at three places i.e two at bottom & one at top with 3.15 mm dia galvanised mild steel wire in each loop complete all as secified and as directed. 19 Material and labour for prepartion of old plastered/ unplastered surface of walls incl washing, rubbing down and stopping of painted surfaces etc & applying one coat of cement base paint complete including filling of hole, cracks etc with lime putty or plaster of paris all as specified and as directed.Note :- Shade and pattern of the colour to be approved by GE. 20 All as per item No 19 above but two coats of cement base paint. 21 Material and labour for preparation of olddecorated surfaces in walls, soffits, facia roof etc and applying one coat of weather proof premium acrylic based emulsion paint (100% acrylic) as per manufacturers instructions etc complete all as specified and directed.Note :- Shade and pattern of the colour to be approved by GE. 22 Material and labour for complete removal of existing treatment on wall surfaces by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc incl applying two or more coasts of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company DepotTinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and as directed. 23 Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other cover-ing. Doors, etc. to be prepared for hanging or sliding with and includ-ing either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality-A. complete all as specified and as directed. 24 Excavating in post holes (or similar holes) each in loose/softn exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed. 25 Fixing only chain link fencing including line wires any mesh size and type to any type of standards, rails straining bolts etc including provision of binding wire complete all as specified and as directed. 26 Supply only Chain link MS galvanised fencing, any size or type all as specified and as directed. 27 Material and labour for mild steel round bars 10 mm dia and over, cut to length bent to shape required including cranking , bending and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. 28 Material and labour for preparation of old steel surfaces of any description over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and as directed. 29 All as per item No 28 above but one coat of aluminium paint 30 Material and labour for preparation of old brick, stone, concrete, asbestos cement or plaster surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. 31 Material and labour for preparation of old surfaces of paver tile, blocks, kerb stone etc and applying one coat of floor guard of premium acrylic emulsion paint in any colour of approved make etc complete all as specified and as directed. 32 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 33 Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and demolished meterial to be removed out side of MD land complete all as specified and as directed. 34 Material and labour for plain cement concrete Type B2 (1:2:4) (using 40mm graded crushed stone aggregate) in surface channel, drains and similar works etc complete all as specified and as directed. 35 Material and labour for25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as on floor complete all as specified and as directed. 36 Material and labour for polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors. 37 Material and labour for mosaic tiles of size (2cm x 2cm), 4mm thick, 327mmX327mm (sheet) resistant to heat, crazing, acid, fungi and anti fade, washable for floors and walls of swimming pool, water fountain and like over 10 mm thick cement plaster/screed bed in CM (1:3) including all necessary fixing & grouting material as per manufacturers instructions etc complete all as specified and directed.Note:- Make/shade/colour/pattern of tile shall be aprroved by GE. 38 Material and labour for factory made Machine pressed rubble moulded precast conctete interlocking paver block any shape and sizewith grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 40 mm thick stone dust cousioning all as specified and directed 39 Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. 40 Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed. 41 Material and labour forfor 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 42 Demolition & breaking up drain pipe (salt glazed, AC or reinforced concrete ) set in cement mortar for 300 mm internal dia of pipe complete all as specified and as directed. 43 Material and labour forfor PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl forming cradles etc of the pipes after they are laid and tested for 300 mm boreRCC pipe complete all as specified and as directed. 44 Material and labour for reinforced cement concrete pipes class NP - 2, laid in trenches & jointed complete with collars, bore of pipe 300 mm complete all as specified and as directed. 45 Supply and fixingin repair of aluminium composite panels including rear side aluminium frame work shall consist of following:- (i)3-4 mm thick thermoplastic core of any LDPE sandwiched between 2 skins of 0.5 mm thick aluminium sheet making a total panel thickness of 4 mm with outer surface finished with PVDF based coating 30 micron, inner surface finished with a thin coat of polyester paint(ii)Aluminium framing of section 38 mm x 50 mm x1.50 mm thick.(iii) Aluminium grid shall not be exceed 1.0 Sqm eachthe aluminium grid shall be fixed with clamp 40x6 mm not more than 1 m c/c (iv)Colour shall be approved by GE. 46 Maintenance of rolling shutters of size upto 5.5 m wide with easioning, greasing, necessary welding to make the shutters full functional andeasy operational including minor spares and materials costing upto Rs. 500/- as required and painting with synthetic enamal paint all as specified and as directed.Note:Safety lever lock/ ball bearing and other major spares if required will be replaced and paid separately. 47 Supply and fixing of steel rolling shutters of 1.00 mm thickness of laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push pull or manual type including taking down of old rolling shutter etc completed all as specified and as directed. 48 Supply and fixingSafety lever locks mild steel with 4 levers for rolling shutter complete all as specified and as directed. 49 Supply and fixingball bearing for rolling shutters all as specified and as directed. 50 Material and labour for providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. 51 Cleaning of mansoon drains by desilting, desludging and removing grass, foreign and typeof depositedmaterial from bottom surface, sides & top portion of drain wall and removing rubbish from site to a distance exc 250 m and n.exc 500 m complete all as specified and as directed. Note:Plaster work in patch where damaged by grass/ vegetation reqd shall be measured and paid saperately. 52 Supply and fixingof steel work in tubular trusses, post, purlin, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed. 53 Dismantling asbestos cement, galvalume, fiber sheet (Plain, corrugated , semicorrugated, etc.) sheet in roof covering complete all as specified and directed. 54 Supply and fixingPre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed. 55 Supply and fixingPre painted galvaIume aluminium zinc coating GI based Plain steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge/valley gutter of roofcovering fixed with self tapping screws etc complete all as specified and directed.
