Tender For Provn./Construction Of Separate Toilet Block For Girls And Boys At Cb School In Cantt Area.; 1 Earth work in excavation in trenches in soft loose soiln.exc. 1.5 M wide and 1.5M deep and getting out, returning filling in, including spreading & leveling in layers all as specified in MES SSR 2020. 2 M/L PCC bed 1:5:10 in fillings & Mass concrete all as specified in MES SSR 2020. 3 M/L brick work in cement mortar 1: 4 straight or curved on plan exe. 6m mean radius with sub class ‘A’ bricks all as specified in MES SSR 2020. 4 S/F of brickwork with fly ash bricks class designation 75 (Kgf/cm2) straight or curved on plan exc 6m mean radius built all as specified in MES SSR 2020. 5 M/L sand filling under floors including watering & well ramming all as specified in MES SSR,2020 6 S/F of Marble work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platformsand like in cement mortar mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types.(a) Makrana morwara Kishangarh of any colour. 7 M/L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixing marble pigment to match with shade of granite complete all as sp. in MES SSR 2020. 8 Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landingsnot exceeding 200mm thick (Horizontal or sloping) columns, Beams and similar workall as sp. in MES SSR 2020. 9 Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of Foundation and Plinth Beams and similar work; vertical or to batter fair finished surface all as sp. in MES SSR 2020. 10 S/F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all specified in MES SSR, 2020. 11 M/L RCC work 1:1½:3 for slabs supported on walls, beams and columns in floors, roofs, landing balconies, canopies deck slabs, columns, pillars and in shelves and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC works. 12 M/L RCC work 1:1½:3 for foundation including raft footing foundation beams plinths beams bases for columns basement slabs under reamed piles and mass concrete and the like all as specified inMES SSR, 2020. Note : Only OPC cement will be used for all RCC works. 13 S/F 2nd class Hard wood, plain framed,paneled factory made shutter (Two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I ) kiln seasoned and chemically pressure treated all as specified in MES SSR 2020. 14 S/F of 2nd Class Hard wood, glazed and sketeton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. Sizes of members of shutters all as specified in MES SSR 2020. 15 S/f framed work such as grill, grating etc with ends of bars shouldered and / or riveted, or forged into spike, framed guard bars; barred iron doors; ladders; framed baluster; trusses, M..S bar fencing, walk ways; railings; frame work of water tanks and similar work confirming to Fe 410-0 or Fe310-0 all as specified in MES SSR 2020. 16 S/F of pre-painted galvalume aluminum zine coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified in MES SSR 2020. 17 S/F Aluminium Frame Made of Aluminium rectangular section of 1.3 mm Thickness of size 2 ½”x 1 ½” Complete including fixing of5 mm thick Glass Black/Brown for windows, doors & partly fixed, partly openable framecomplete all as specified in MES SSR 2020. 18 Supply and fixing of Aluminium frame (Color coated) made of aluminium rectangular section of 1.3 mm thick of size 2 ½” x 1 ½” complete including fixing of 3 mm to 4mm thick bakelite sheetfor windows/doors partly fixed partly openable frame inlcuding handle/towerbolt etc. complete all as sp. in MES SSR 2020. 19 M/L PC plaster 12mm thick in cement mortar 1:4,fair finished even and smooth without using extra cement all as specified in MES SSR,2020. 20 S/F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n. exc. 0.5 sq. m in each pane all as specified in MES SSR,2020. 21 M/L glazed ceramic tiles or anti skid tiles 300mm x 300mm or 450mm x 300mm x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR,2020 (colored tiles) including screed 15-20 mm thick. 22 M/L Virified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed 20-25 mm thick complete all as sp. in MES SSR 2020. 23 M/L glazed ceramic tiles 300 mm x 200 mmor 300 mm x 300 mm x 7 mm thick etc. On walls set and jointed in neat ceemnt slurry and pointed in white or colored cement to match all as sp. In MES SSR 2020 (colored tiles) 24 M/L for one light point or one fan point controlled by one switch with cables 1.5 sqmm in size copper conductor PVC sheathed Single core in PVC conduit all as sp in MES SSR 2020 25 M/L for modular switch 1 way 6A 1 module complete all as spin MES SSR 2020. 26 S/F of tubes. Medium grade galvanised with all fitting laid in wall/floors 20 mm dia all as specified in MES SSR 2020. 27 Heritage Granule finish/Rustic Finish Application of one coat of quartz primer of spectrum or equivalent and application of granules of desired shade with trowel and top coat of transparent silicon to make surface water repellent all as sp. 28 Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on wall and Ceilings or laying in floors complete 20 mm outer dia all as specified in MES SSR 2020. 29 Supplying and laying of CPVC pipes SDR 11and plain CPVC SDR 11 fittings on wall and Ceilings or laying in floors complete 25 mm outer dia all as specified in MES SSR 2020. 30 M/L Vitreous china wash basin, white, flat back size 630 x 450 mm including brackets and waste fittings, brass CP and PVC connection 450 mm and Brass CP bottle traps for wash basin with inlet and outlet 32 mm bore dia and CP pillar tap cast copper alloy, with capstain head 15 mm complete all asspecified in MES SSR 2020. 31 M/L for Vitreous China Squatting pan, Orissa Pattern size 580 x 440 mm white integral foot rests and PVC valveless, syphonic action type,flushing cistern capacity 10 ltrs. and PVC connection 450 mm, flush pipe of Polyethylene of low or high density complete all as specified in MES SSR 2020. 32 M/L for Vitreous china semi pedestal pattern (Anglo-indian type) complete including PVC valveless, syphonic action type, flushing cistern capacity 10 ltrs. and PVC connection 450 mm, flush pipe of polythylene of low or high density complete all as specified in MES SSR 2020. 33 M/L for Vitreous china wash down water closet pan (Pedestal Pattern), white includingPVC valveless, syphonic action type, flushing cistern capacity 10 ltrs. and PVC connection 450 mm, flush pipe of polythylene of low or high density complete all as specified in MES SSR 2020. 34 Supply and fixing of Bib taps, cast copper alloy with crutch or butterfly handle, Chromium plated 15 mm dia complete all as specified in MES SSR 2020. 35 M/L Vitreous China Urinal, half stall type, white and PVC connection 450 mm and waste fitting, brass, Chromium plated for glazed ware urinals and Urinal spreader of PTMT any Color for fixing with 15 mm dia and Brass chromium plated bottle traps for wash basins/Urinals complete all as specified in MES SSR 2020. 36 M/L for Viteous china Urinal partition white of size 310 x 700 mm complete all as specified in MES SSR 2020. 37 supply and fixing of 600 x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board complete all as specified in MES SSR 2020. 38 Supply and fixing of PVC pipe 110 mm dia laid in trenches including haunching under or over surrounding and paking against the side complete all as specified in MES SSR 2020. 39 Ditto but 75 mm dia pipe laid in trenches including haunching under or over surrounding and paking against the side complete all as specified in MES SSR 2020.
