Tender For Spl Repair To Bldg No A 66 Or Living Of 8 Kumaon And Spl Repair To Bldg No A 44 Operation Theater Of 417 Fd Hosp At Rhenock Mil Stn Under Ge 867 Ews
Tender Value
33.73 Lakhs
Estimated cost
Bid Submission
29 Aug 2025
0 days left
EMD
67500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pedong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Spl Repair To Bldg No A 66 Or Living Of 8 Kumaon And Spl Repair To Bldg No A 44 Operation Theater Of 417 Fd Hosp At Rhenock Mil Stn Under Ge 867 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital pattern roof covering all as specified and directed. |
| 2 | S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed. |
| 3 | S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed. |
| 4 | Dismantling of wall and ceiling boards( fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets all as specified. |
| 5 | S&F GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. |
| 6 | S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified and as directed. |
| 7 | M&L 4mm thick asbestos cement plain building boards, fixed or laid /inserted to GI snap grid framework with screw in ceilings. |
| 8 | M&L three coats of white wash on ceiling onAC boards. |
| 9 | Demolition of brickwork or stone/boulder masonry built in cement mortor all as specified. |
| 10 | M&L precast cement concrete (1:3:6) type C-1 ,(using 20mm graded stone aggt) block masonry with solid blocks10cm in width and setting in CM (1:6), complete all as specified and as directed. |
| 11 | M&L RCC type B-1, (1:2:4) (20mm graded stone aggregate) as in beams cantilevers, bressumers, lintels over 1.5 m span, complete all as specified and as directed. |
| 12 | Formwork tosides and soffits of floor or roof beam,beam hunching, girders ,bressumers,lintels, cantilevers,shelves including supports, overhangs, etc. also splays between floors and beams of fair finish surface all as specified. |
| 13 | M&L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) complete all as specified and directed. |
| 14 | All as per Sl item No-13 above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders. |
| 15 | M&L 15mm thick rendering on brick or block concrete masonry walls in cement plaster (1:6) incl finished even and smooth w/o using extra cementall as specified. |
| 16 | M&L 20mm thick rendering in two layers of 10mm each on brick or block concretemasonry walls in cement plaster (1:4) with WPC incl finished even and smooth w/o using extra cementall as specified. |
| 17 | M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting as priming coat ,including a thick layer of wall care putty (Birla white or equivalent) complete all as specified and directed. |
| 18 | M&L Preparation of plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting complete all as specified. |
| 19 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed. |
| 20 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed. |
| 21 | S&F Pressed steel door frame for doors, size 165 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 22 | S&F 35mm thick plain framed panelled shutter (any number of panels) of 2nd class H.W with panels of timber flat on both sides or of venerred particle boards medium density, wood particle board with commercial face veeners. |
| 23 | S & F 1st class hard wood 30mm thick Glazed and skeleton shutter, poen rebated and prepared to receive glass, gause,etc (without sash bar), edges of framing plain or chamfered or rounded, fitted with cut and mitred beads for securing glass etc; size of members of shutters as specified in SSR -I ,section 8, clause 8.24 (a) supplied and fitted to chowkhats. |
| 24 | S&F Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete with glazing bars. |
| 25 | S&F Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete withoutglazing bars. |
| 26 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 27 | S&F 3mm thick sheet glass, oridinary quality and glazing with oil putty in square n etc 0.5 sqm in each pane. |
| 28 | S & F Galvanised wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinted tacks or galvanised wire staples as in fly proof window and door ,all as specified and directed. |
| 29 | S&F 250 mm long aliminium anodised sliding door boltwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed. |
| 30 | S&F anodised Extruded aluminium alloy handles 150mm long, fabricated type. |
| 31 | S&F Aluminium anodised barrel tower bolts, 200 mm long, of extruded section. |
| 32 | M&L Preparation and applying two coat of synthetic enamel paint over one coat of pink primer on new wooden surfaces, of any description, over 10cm width or girth not other wise described. |
| 33 | M&L Preparation and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, of any description, over 10cm width or girth not other wise described. |
| 34 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise. |
| 35 | M&L joint free non skid ceramic colured tiles 7 to 8mm thick, area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, in floors etc. set & jointed in neat cement slurry over 15mm screed bed or bedding layer CM (1:6) & pointd in coloured cement to match complete all as specified and as directed. |
| 36 | M&L glazed ceramic coloured tiles 300 x 200mm x 7mm thick on verticalsurfaces such as skirting, dados, set & Jointed in neat cement slurry over 15mm screed bed or bedding layer CM (1:4) & pointed in colour cement to match complete all as specified and as directed. |
| 37 | S&F in repair anodised aluminium alloy curtain rail with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 38 | Dismantling wrought iron or mild steel work of any description complete all as specified. |
| 39 | S & F Roof trusses (Framed), trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections ) including distance pieces cleats etc FE-410W (Gde E-250) quality A. |
| 40 | Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level) all as specified and as directed. |
| 41 | M&L 75mm thick PCC type C-2, (1:3:6) (40mm graded crushed stone aggregate) as in path, plinth protection, etc., complete all as specified and as directed. |
| 42 | M&L for PCC type C-2, (1:3:6) (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 43 | M&L for Cement concrete 100 mm thick (1:4:8)Type D-2, (using 40mm graded crushed stone aggregate) as in sub base and finishing cement concrete surface even and smooth complete all as specified and as directed. |
| 44 | Form work to sides of concrete foundations, footings, bases of columns and plinth beam and similer work etc in rough finished surfaces of concrete flat. |
| 45 | S&F in repair anodised aluminium alloy curtain rail with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 46 | Taking down old existing copper/aluminium point wiring (light fan, Socket or power) Complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. as directed by the Engineer-in-charge. |
| 47 | Disconnection and taking downdistribution boards, switch fuse unit, enclosure for MCB/MCB Box including MCB\"s of any type and size andkeeping aside for reuse of serviceable one. |
| 48 | M&L for concealed point wiring with 1.5 Sqmm (nominal area) PVC insulated unsheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and includingrigidnon metallic PVC conduit not less than 20mm size, medium grade with all necessary fittings, concealed wiring, for light / Exhaust fan point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed for mounting of fittings like switch, socket, fan regulator etc. with 3 mm thick laminatedbakelite sheet cover, for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion. |
| 49 | All as peritem No 48 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board. |
| 50 | All as per item No 48 here-in-before but One 3 pin socket outlet 5 Amps on the same board with other switchs with cables 1.5 Sqmm size. |
| 51 | All as per item No 48 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable. |
| 52 | M&L modular switch 1 way 6Amps, 1 module, complete all as specified and as directed. |
| 53 | M&L modular socket outlet6Amps - 2/3 pin combined 2 module, complete all as specified and as directed. |
| 54 | M&L Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed. |
| 55 | M&L Modular switch 1 way 16A, 1 module, complete all as specified and as directed. |
| 56 | S/fix modular white or Ivorycover plate with frame, 3 module, complete all as specified and as directed. |
| 57 | S/fix modular white or Ivorycover plate with frame, 4 module, complete all as specified and as directed. |
| 58 | S/fix modular white or Ivorycover plate with frame, 8 module, complete all as specified and as directed. |
| 59 | S&F Metal Flush box 3 module, complete all as specified and as directed. |
| 60 | S&F Metal Flush box 4 module, complete all as specified and as directed. |
| 61 | S&F Metal Flush box 8 module, complete all as specified and as directed. |
| 62 | Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. |
| 63 | Supply & Fixing in repairs ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. |
| 64 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 65 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size and dismantling of existing defective fitting complete.Make Crompton cat part No \"LCTLRP-24-FO-CDL\" or equivalent make in Philips/Havells. |
| 66 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection by using 25mm dai GI bracked fixed on wall by means of nuts, botls and clamps complete. |
| 67 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 68 | S&F lamp/angle holder insulated body with back plate for batten fitting, complete all as specified and as directed. |
| 69 | S & F inLED retro fit lamp B-22holder base with poly carbonate body and aluminium heat shrink of12 Wcomplete all as directed. |
| 70 | S&F sheet metal enclosure for MCB SPN DB double door 12 way 240V with 200 amps rated busbar, complete all as specified and as directed. |
| 71 | S&F sheet metal enclosure for MCB SPN DB double door 08 way 240V with 200 amps rated busbar, complete all as specified and as directed. |
| 72 | Supply and fixing MCB Isolator Single pole and neutral 40 Amps capacity 10 KA 240 Volts 50 HZ, \"C\" curve.Cat part No. 4086 18 of Make : Legrand or equivalent in Siemens/Schneider. |
| 73 | Supply and fix MCB Isolator single pole (SP), 10 kAof 5 -40 Amps capacity240 Volts, \"C\" curve. Cat part No. 4085 95 of Make : Legrand or equivalent in Siemens/Schneider |
| 74 | Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.NOTE : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length. |
| 75 | Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length. |
| 76 | M&L for Earthing in repairs completewith galvanizedsteelearthplateelectrode600 x 600 x 6 mmburieddirectlyinground( earthpitnotlessthan2.25 mdeepbellowgroundlevel )withtopedgeoftheplatenotlessthan1.5 m bellownormalgroundlevel, connectedtogalvanizedearthlead wire 4 mmdia.bymeansof galvanizedironorsteelbolts , nuts , check nuts andwashers, andconnectedto equipmentsasdirected,includingfunnelwithGI med grade wateringpipe20 mmbore , wiremesh ,charcoalorcokeandcommonsaltinalternatelayersof15 cmcompactedthicknessallaroundtheearthelectrode ,withconcretepitinPCC (1:3:6)type C-1 , 50 mmthickprecastRCC(1:2:4)typeB-1 coverslabreinforcedwith8 mmdiadeformedbar15 cm C/Candsuitablehandleof 10 mmdia roundbar,GI medium grade pipe for earth lead protectionincludingnecessaryexcavationearthworkinsoft/loosesoilanddisposalofspoiltoadistancen.exc.50 mandnecessarytestingcompleteallasshownonelectricalplateNo. 3ofMESSSRPart-I and as directed. |
| 77 | M&Lin replacement earthing complete with galvanized steel earth plate electrode 600mmX600mmX6mm buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and connected to and including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means ofnuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dollyall as shown in electrical plate No 3 of MES schedule Part-I, and testing on completion includingnecessary excavation and earth work in any type of soil, PCC(1:3:6) type C1 chamber, CI Cover with cast iron frame, funnel with watering pipe 20mm dia medium grade, wire mesh and lugs, GI protection pipe15mm dia, light grade 7.5 mtr long for protection of earth lead upto test point etc incl taking down old u/s earthing all as specified and as directed. |
| 78 | M/L for in replacement of Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLSH multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly One light/fan/bell point controlled by one switch 6 Amp one way. |
| 79 | All as described as per item No 78.00 above but One 3 pin socket outlet on same board with other switches, complete all as specified and as directed. |
| 80 | All as described as per item No 78.00 above but One 3 pin switch socket combination 6 amp on the independent board, complete all as specified and as directed. |
| 81 | All as described as per item No 78.00 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathedFRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board, complete all as specified and as directed. |
| 82 | S & F in replacement switch piano flush type single pole, one way 6amp, complete all as specified and as directed. |
| 83 | S & F in replacement switch socket combination 5 pin 6 amp, complete all as specified and as directed. |
| 84 | S & F in replacementSwitch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type, complete all as specified and as directed. |
| 85 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed |
| 86 | S & Fin replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 87 | Supply & fixingin replacementbuilding LED security light suitable for 25 W LED with Housing Pressure die-cast aluminium alloy for housing (heat sink)with IP66 & top opening for easy maintenance, Operating voltage range: 140-270 V, system power consumption not more than 25W, 240V, lumen output not less than 2500lm, CCT = 5700K, system efficacy > 100, including bracket made out of 25 mm dia light grade GI pipe not less than 1.2 mtr long bend to shape duly fixed with MS clamps, nut, bolts etcincluding connecting up with 3.0 core, 1.5 sqmm multicore copper conductor PVC sheathed from connector to ceiling roseincluding taking down old u/s light fitting complete all as specified and as directed. Make : Crompton cat Part No \"LST-25-CDL-M\" or equivalent in Philips/Havells. |
| 88 | Supply and fixing in replacement240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete including taking down old unserviceable MCB all as specified and as directed. Make : Legrand/Seimen/Schneider |
| 89 | Supply and fixing in replacement240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity SPN 40 to 63 Amps, in the MCB DB Complete with connection testing and commissioning complete including taking down old unserviceable MCB all as specified and as directed. |
| 90 | Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n\"exc. 1.50m deep for HT under ground cable/pole foundationand getting out including forming bottom surface to required level or slope, complete all as specified and as directed. |
| 91 | Returning filling including spreading leveling watering and well ramming in layers not exc 25Cmin soft/ loose soil, complete all as specified and directed. |
| 92 | Removing excavated material in soft/ loose soil n\"exc 50M and depositing where directed at a level n\"exc1.5M above the starting point, complete all as specified and directed. |
| 93 | M&L for sand cushioning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches complete all as specified and directed. Note :-Only Puned layers shall be measured. |
| 94 | M&L for common burnt bricks, sub class \"B\", of size 250 x 125 x 75 mm laid in trenches for cable protection, complete all as specified and as directed. |
| 95 | Supply and Laying in replacement of cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor on wall with the help of shadel of size 25 Sqmm 4 core as required at site, complete all as specified and as directed. |
| 96 | Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor on wall with the help of shadel of size 16 Sqmm 4.0 core as required at site, complete all as specified and as directed. |
| 97 | M & L GI tube light grade for passing through cables under the floor ,along the wall or along the pole of 40 mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers etccomplete all as specified and as directed. |
| 98 | Note : In case of doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment. |
AI Tender Summary
Tender Timeline
Aug 08, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 05, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender