Tender For Fencing Work At Karnojora Sub Market Yard Of Uttar Dinajpur Zilla Regulated Market Committee
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Aug 2025
0 days left
EMD
10500
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
karnajora → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Fencing Work At Karnojora Sub Market Yard Of Uttar Dinajpur Zilla Regulated Market Committee
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation, trenches, drains in all sorts of soil including mixed soil but excluding laterite or sand stone includingremoving , spreading or stacking the spoils within a lead of 75mm as directed, the item including trimming the sides of trenches leveling dressing and ramming the bottom bailing out water as required complete.a)Depth of excavation not exceeding 1.50mtr. |
| 2 | Earthwork in filling in foundation trenches or plinth with good earth in layers not exceeding 150mm including watering and ramming etc. layer by layer complete.(with earth obtained from excavation of foundation. ) |
| 3 | Supplying & laying Polythene sheet (150 gm/Sq. m ) over damp proof coarse or below flooring or roof tarracing or in foundation or foundation trenches. |
| 4 | Cement Concrete with 40 mm down ballast excluding shuttering. (1:3:6 proportion.)( Pakur Vr.) |
| 5 | Brick work with 1st class bricks in cement mortar (6:1)a) In Foundation and Plinth |
| 6 | Brick work with 1st class bricks in cement mortar (6:1)b) In super structure |
| 7 | 125mm thick brick work with 1st class bricks in cement mortar (4:1) . |
| 8 | OrdinaryCement Concrete (mix 1:1.5:3) with graded stone chips 20mm. nominal sizes excluding shuttering and reinforcement (if any) as per relavent IS Code . (i) Pakur Vr. |
| 9 | Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hardwood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting fixing and striking out after complete of works(upto roof of groun floor).f) 25mm to 30mm shuttering without staging in foundation. |
| 10 | Reinforcement for reinforced concrete work in all sorts of structure including distributors, stirrups binder etc. including supply of rods initial straightening and removal of loose rust ( if any) necessary cutting to requisite length hooking andbending to correct shape placing in proper position every intersection complete as per drawing and direction. For works in foundation, basement, roof of ground floor/upto 4m.i) Tor Steel ii)Other Than TATA /RINL/SAIL |
| 11 | Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chippingover concrete surface.)(ii)(b)15mm th. Cement plaster(1:4) |
| 12 | Neat cement punning 1.5mm thick in wall dado window silt,floor, drqins etc. using cement @ .152M3/M2 i) gr. Floor |
| 13 | Applying exterior grade acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish / Acrylicexterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacture\"s specification and as per direction of EIC. |
| 14 | Protective and decorative textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystaline additives derived from granite as per manufacture\"s specification and as per direction of EIC to be applied over acrylic primer as required.( Two Coats ) i) Gr. Floor |
| 15 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor |
| 16 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. ( |
| 17 | a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc. |
| 18 | Painting with superior synthetic enamel paint of approved made and brand including smoothening the surface by sand paper. (Two Coats)i) on steel |
| 19 | Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short pieceetc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories,specials.)PVC Pipesi)40mmDia |
| 20 | Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short pieceetc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories,specials.)PVC Pipesii) 25mm Dia |
| 21 | Supplying, fitting and fixing bib cock or stop cock.(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)15 mm |
AI Tender Summary
Tender Timeline
Aug 08, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 20, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender