Construction Of New Passenger Terminal Building For Domestic Operation At Jodhpur Airport Sh Furnishing Of Vip And Reserved Lounge Of New Passenger Terminal Building With Interior Traditional Seating And Decorative Articles At Jodhpur Airport Furnishing With Interior Work Traditional Seating And Decorative Articles , Supplying, Fixing Andplacing Arch Console Table As Per Specification Below: The Arch Console Table Console Is Made Up Of Reclaimed Teak Wood Andamerican Oak Veneer Of Approved Shadethe Whole Unit Made By Cnc And Hand Carved Design. Each Arch Has A Back Layer Of Its Own One More Arch Comprises Shadow Effect In Light. Base, Top And All The Sides To Be Painted In Approved Colour Shade & Including All Material, Hardware, Fixture, Rounding, Chamfering , Groove, Cutting , Moulding, Finishing, Polishing Etc. Dimensions :Length 218.44 Cm (86) Width 38.1 Cm (15) Height 88.9 Cm (35) Dimension Tolerance : +/- 10Mm. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Lotus Designedmarbleurli With Stand As Perspecification Below: The Lotus Designed Marbleurli With Stand Is Made Up Of Natural White Solid Marble Grade A Carved Out In Base With Natual Finish, Completely Hand Carved Design Including All Material, Hardware, Fixture, Rounding, Chamfering , Groove, Cutting , Moulding, Finishing, Polishing Etc. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions : Lotus Plate: 38.1 Cm (15”) × 38.1 Cm (15”) × 10.16 Cm (4”) Base: 35.56 Cm (14”) × 35.56 Cm (14”) × 22.86 Cm (9”) Dimension Tolerance : +/- 10Mm. The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Ripple Cut Brass Finish Planter As Per Specification Below: The Ripple Cut Brass Finish Planter Made Up Of4 Mm Thick Iron Rods And Sheets With Rippled Texture And Brassfinish. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :Height 27.30 Cm (10.75) Dia: 23.49 Cm (9.25) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Bhavani Garuda Sculpture As Per Specification Below: The Garuda Sculpture Made Up Of Brass With Antique Tarnish. Overall Height Designed To Balance The Stability And Weight Accordingly. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions : Length 25.4 Cm (10) Width 25.4 Cm (10) Height 41.91 Cm (16.5) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Tribal Metal Faces Sculptures Hammered Brass (Set Of-2) As Per Specification Below: The Hammered Brass Shall Be Of 3 Mm Hammered Brass Pressurized And Heated Under 800 Degree Celsius. Finish On The Product Is Nbr - Imt - 001. Completely Handcrafted, So Each Pc Will Have Slight Variation. Use Of Abrasive Will Damage The Finish And Material Rapidly. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :Large 13.97 Cm (5.5) W X 13.97 Cm (5.5) H Small 8.89 Cm (3.5) W X 10.16 Cm (4”) H The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Bird Sculptures On Stands (Set Of-2)As Perspecification Below: Sculpture Made Ofalloy, Mixture Of Copper, Steel And Brass, High Density Resin And European Ash Wood Base. Properly Klin Dried And Seasoned.Dye Casted Sclupture With 4 X 4Black. Use Of Abrasive Will Damage The Finish And Material Rapidly. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions : Large Piece 39.37 Cm (15.5) Ht., Small Piece 33.02 Cm (13”) Ht. Wooden Block 10.16 Cm (4”) X 10.16 Cm (4”) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Ginkgo Leaf Embossed Brass Planters (Set Of-2) As Per Specification Below. The Planter Is Made Up Of4 Mm And 8 Mm Thick Iron Rods And Sheets With Cnc Carving And Brass Finish. Bases, Made In Fabricated Iron Rod Finished In Brass Finish. Use Of Abrasive Will Damage The Finish And Material Rapidly. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions : Large Piece 31.75 Cm (12.5) Dia, 63.5 Cm (25) H Small Piece 31.75 Cm (12.5) Dia, 50.8 Cm (20) H The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Reception Table As Perspecification Below: The Reception Table Structure Made Up With Seasoned , Klin Driedeuropeanwhite Ash Wood And Oak Veneer Of Required Shade With 18-20Mm Thick As Approved Stone/Natural Marble Grade A Table Top Finished. Sides And Carcass To Be Combination Of Europeanwhite Ash Wood And Oak Veneer Finish/ Finished In Walnut Pu Stain As Approved. Front Panel Etched With Technique Of Methodical Pattern On Ss Metal Sheet Of 3 Mm Thick. Drawers Channel And Hardware Shall Be Hettich/Ebco & Including All Material, Hardware, Fixture, Rounding, Chamfering , Groove, Cutting , Moulding, Finishing, Polishing Etc. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :121.92 Cm (W) × 66.04 (45.72+20.32) Cm (D) ×75.0Cm H1,100.58 Cm (H2) Dimension Tolerance : +/- 10Mm. The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Achintya High Chairmade From Natural Teak Wood, Natural Cane & Upholstery As Per Specification Below: Solid Seasoned Hardwood Frame Natural Teak Wood, Hand-Woven Natural Cane Back & Sides, Premium Ikat/Tribal Fabric Upholstered Seat Cushion With High-Density Foam Of 32 (+2) Kg/M³, Wood Polish: Natural/Antique Matte Finish, Traditional Carving On Legs And Armrest All Edges Rounded And Finished. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimension : Length 60.96 Cm (24) Width 72.39 Cm (28.5) Height 94.61 Cm (37.25) Seating Depth 69.21Cm (27.25) Seating Height 50.80Cm (20) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing3 Seater Sofa As Per Specification Below: The Three Seater Sofa Made Up Of Exclusive Premium Fabric Of Velvet Or As Approved, Internal Structure Made In Solid Wood Withseasoned , Klin Dried European White Ash Base, Finished In Pu Stain, Machined From Wooden Log Of 30 Cm. It Warp And Comfortable Seat Depth & Height Designed Keeping Modern Indian Lifestyle In Mind,Wrapped In Buttery-Soft Premium Fabric Of Velvet Or As Approved, The Panelled Back And Cushioned Armrests Encourage Lounging,Designed With Modernity & Elegance, Choose The Option That Suits Airport Vip/Reserved Lounge. The Complete Structure Shall Be Covered By Pu Foam,The Frame Shall Be Padded With High Resilience Pu Foam Having 35 (±2) Kg Per Cu Meter Density In Seat & Back As Per Requrement,There Shall Be Cushion Arm 40Mm Thick Provided Padded With High Resilience Polyurethane Foam Having Density 20 (±2) Kg Per Cu Meter . The Complete Stack Foam Structure Shall Be Covered With Premium Exclusive Premium Fabric Of Velvet Or As Approved. Assmebled With Bonded Method. Upholstered With Pu Foam With Different Pasting Combinations, Handtufted With Pull Out Method Used On Buttons And Threads And Stiched In Pu Foam & Including All Material, Hardware, Fixture, Rounding, Chamfering , Groove, Cutting , Moulding, Finishing, Polishing Etc. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :Length 244.5 Cm (96.25) Width 88.5 Cm (34.84) Height 76.5 Cm (30.11) Seating Depth 59.5 Cm (23.42) Seating Height 45.5 Cm (17.91) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Arm Single Sofa As Per Specification Below. The Single Seater Sofa Made Up Of Exclusive Premium Fabric Of Velvet Or As Approved, Internal Structure Made In Solid Wood Withseasoned , Klin Dried European White Ash Base, Finished In Pu Stain, Machined From Wooden Log Of 30 Cm. It Warp And Comfortable Seat Depth & Height Designed Keeping Modern Indian Lifestyle In Mind,Wrapped In Buttery-Soft Premium Fabric Of Velvet Or As Approved, The Panelled Back And Cushioned Armrests Encourage Lounging,Designed With Modernity & Elegance, Choose The Option That Suits Airport Vip/Reserved Lounge. The Complete Structure Shall Be Covered By Pu Foam,The Frame Shall Be Padded With High Resilience Pu Foam Having 35 (±2) Kg Per Cu Meter Density In Seat & Back As Per Requrement,There Shall Be Cushion Arm 40Mm Thick Provided Padded With High Resilience Polyurethane Foam Having Density 20 (±2) Kg Per Cu Meter . The Complete Stack Foam Structure Shall Be Covered With Premium Exclusive Premium Fabric Of Velvet Or As Approved. Assmebled With Bonded Method. Upholstered With Pu Foam With Different Pasting Combinations, Handtufted With Pull Out Method Used On Buttons And Threads And Stiched In Pu Foam & Including All Material, Hardware, Fixture, Rounding, Chamfering , Groove, Cutting , Moulding, Finishing, Polishing Etc. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :Length 73.66 Cm (29) Width 86.36 Cm (34) Height 93.98 Cm (37) Seating Depth 44.25 Cm (17.5) Seating Height 55.5 Cm (22). The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Arch Console Coffee Table As Per Specification Below: The Arch Console Coffee Tableis Made Up Of Reclaimed Teak Wood And Oak Veneer Of Approved Shade With Cnc And Hand Carved Design. Each Arch Has A Back Layer Of Its Own One More Arch Comprises Shadow Effect In Light. Base , Top And All The Sides To Be Painted In Approved Colour Shade & Including All Material, Hardware, Fixture, Rounding, Chamfering , Groove, Cutting , Moulding, Finishing, Polishing Etc. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :Length 121.92 Cm (48) Width 96.52 Cm (38) Height 40.64 Cm (16) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Honeycomb Inlay Side Table As Per Specification Below: The Honeycomb Inlay Side Table Made Up Of M.D.F., Bone Inlay, Resin, With Deco Paint Of 3-5 Mm Selected Pale White/Natural White Boned Joined And Bonded With Various Chemcials And Mixed With High Density Resin And Natural Black. Dried In Natural Sunlight, Preventing Post Production Cracks Due To Heat And Pressure Exposure. Final Polished With Various Natural Oil And Finished With Matt/Gloss Lacquer. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :Height 39.11 Cm (15.4) Dia 37.08 Cm (14.6) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Ceiling Pendant Light Lamp As Per Specification Below. The Pendant Lamp Made Up Of Natural Teak Wood, Hollowed Through Cnc Machine, Joined With Hand Carved Hammered Brass With Brass Gloss Finish Connected With Wire Ofup To 50 Amps & With Bulb/Led As Required. (All Elect. Accessories Should Be Isi Marked/ Havells,Polycab Or Equavlentas Approved Eic). *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :Height 38.1 Cm (15) Dia: 22.86 Cm (9) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Decorative Partition Table With Corian Top & Sides With Leathercrete Elevation As Per Specification Below: The Decorative Partition Table Is Made Up Of Teak Wood And Oak Veneer With Corian Top & Sides With Leathercrete Elevation. Base, Top And All The Sides To Be Wooden Touch Polish & Including All Material, Hardware, Fixture, Rounding, Chamfering , Groove, Cutting , Moulding, Finishing, Polishing,Painting, Fastners & Proper Fixing Arrangement At Flooring As Required. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions : 450Mm(W)*2450Mm(L)*1000Mm(H1)-1200Mm(H2) Or As Required At Site. For Measurement, Longer Side Face Of Partian Table Will Be Measured Only. The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying,Fixing And Placing Of Storage Cabinate Ofsize450mm(W) X 1200Mm(L) X 1200Mm (H) ,Modular Back Unit Top Shall Be Made From25mm Thickfsc Certified Factory Pressed Commercial Ply With 0.8 - 1 Mm Thick Laminate Both Side Of Approved Shade . While Rest Of The Sides As Well As Shelves And Shutter To Be Made Up Of 18Mm Thickplywood + Laminate. All Edges To Be Provided With Same Matchingplywood + Laminate Edge Banding Fixed With The Hot Melt Glue. Storage Unit With 2Glass Shutters With Wooden Frame + 3 Drawer Construction Is 1 Openable Door With 1 Fixed Shelve + 3 Equal Drawers & All Unit Is Based On Ss Stud Grade 304, In Provided With 2 Universal Multi Purpose Lock And 1 Central Lock For Drawers For Security And Handles Are Provided For Easy Of Opening. Over All Height Of Product Is @ 1200Mm. Each Shutter Should Be Fixed With Required Numbers Hinges, Ss Tower Bolt Of 100 X 10, Double Strip Magnetic Catcher And Drawers Shall Have 100 Mm Size Ss Fancy Handles (One On Each Drawer) With Necessary Hardware/ Fitting/ Hinges Etc. Of Approved Quality(Make: Ebco Or Equalant). For Installation Of Side Unit Wooden Dowels And Minifix To Use For Additional Support. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing3 Seater Sofa As Per Specification Below: The Three Seater Sofa Made Up Of Exclusive Premium Fabric Of Velvet Or As Approved, Internal Structure Made In Solid Wood Withseasoned , Klin Dried European White Ash Base, Finished In Pu Stain, Machined From Wooden Log Of 30 Cm. It Warp And Comfortable Seat Depth & Height Designed Keeping Modern Indian Lifestyle In Mind,Wrapped In Buttery-Soft Premium Fabric Of Velvet Or As Approved, The Panelled Back And Cushioned Armrests Encourage Lounging,Designed With Modernity & Elegance, Choose The Option That Suits Airport Vip/Reserved Lounge. The Complete Structure Shall Be Covered By Pu Foam,The Frame Shall Be Padded With High Resilience Pu Foam Having 35 (±2) Kg Per Cu Meter Density In Seat & Back As Per Requrement,There Shall Be Cushion Arm 40Mm Thick Provided Padded With High Resilience Polyurethane Foam Having Density 20 (±2) Kg Per Cu Meter . The Complete Stack Foam Structure Shall Be Covered With Premium Exclusive Premium Fabric Of Velvet Or As Approved. Assmebled With Bonded Method. Upholstered With Pu Foam With Different Pasting Combinations, Handtufted With Pull Out Method Used On Buttons And Threads And Stiched In Pu Foam & Including All Material, Hardware, Fixture, Rounding, Chamfering , Groove, Cutting , Moulding, Finishing, Polishing Etc. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions : Length 244.5 Cm (96.25)Width 88.5 Cm (34.84)Height 76.5 Cm (30.11)Seating Depth 59.5 Cm (23.42)Seating Height 45.5 Cm (17.91) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Arm Single Sofa As Per Specification Below: Internal Structure Made In Solid Wood Withseasoned , Klin Dried European White Ash Legs Finished In Pu Stain, Handcarved And Machined From Wooden Log Of 30 Cm. Assmebled With Bonded Method. Upholstered With Pu Foam With Different Pasting Combinations, Handtufted With Pull Out Method Used On Buttons And Threads And Stiched In Pu Foam & Including All Material, Hardware, Fixture, Rounding, Chamfering , Groove, Cutting , Moulding, Finishing, Polishing Etc. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions : Length 73.66 Cm (29) Width 86.36 Cm (34) Height 93.98 Cm (37) Seating Depth 44.25 Cm (17.5) Seating Height 55.5 Cm (22) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Inlay Coffee Table With Brass As Per Specification Below: Theinlay Coffee Table With Brass Made Up Ofminimum 3Mm Selected Pale White/Natural White Animal Bones Joined And Bonded With Various Chemcials And Mixed With High Density Resin And Natural Black Dye. With Intricate Design Pattern On Top With Pastel Technique, Machined And Grinded On Automatic Programed Grinder Machine And Hand Pasted On Engineered Wood And Seasoned, Klin Dried Pine Wood Structure. Dried In Natural Sunlight, Preventing Post Production Cracks Due To Heat And Pressure Exposure. Final Polished With Various Natural Oil And Finished With Matt/Gloss Lacquer. Base With Hammered Brass Sheet With Internal Struture Of Klin Dried Pine Wood. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions : Height 46.99 Cm (18.5), Dia 91.44 Cm (36) The Colour Of The This Unit Shall Be As Er Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Dale Side Table (Set Of 2) As Perspecification Below: The Side Tables Made In With Flexi Sheet Of 18 Mm Thickness, Cnc Moulded, Pasted With Hammered Brass, Polished With Lacquer Onseasoned, Klin Driedengineered Wood/Solid Wood Structure. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions : Small Side Table: 35.56 Cm (14), Top X 38.1 Cm (15) H, Large Side Table : 45.75 Cm (18) Top X 45.75 Cm (18) H The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Kazaan Console Table As Perspecification Below: The Kazaan Console Table Made Up Of 3-5 Mm Selected Pale White/Natural White Animal Bones Joined And Bonded With Various Chemcials And Mixed With High Density Resin And Naturalblue Dye & In Drawers Hettich Channel To Be Used. Dried In Natural Sunlight, Preventing Post Production Cracks Due To Heat And Pressure Exposure. Final Polished With Various Natural Oil And Finished With Matt/Gloss Lacquer. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :Width 121.92 Cm (48) Height 76.2 Cm (30) Depth 45.72 Cm (18) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Ceiling Pendant Light Lamp As Perspecification Below: The Pendant Lamp Made Up Of Brass Alloy With Presence Of 21% Cu, Attached With Chain Clamp, Made With Same Brass Alloy, To Provide Better Tensile Strengthconnected With Wire Of Up To 50 Amps & With Bulb/Led As Required. (All Elect. Accessories Should Be Isi Marked/ Havells,Polycab Or Equavlentas Approved Eic). *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions : Height 38.1 Cm (15) Dia: 22.86 Cm (9) The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing And Placing Of Storage Cabinate Of Size 450Mm(W) X 800Mm(L) X 1200Mm(H),Storage Made Of 25Mm Thickfsc Certified Factory Pressed Commercial Ply With 0.8 - 1 Mm Thick Laminate Both Side Of Approved Shade And Brandwith Pvc Edge Banding. Top Made Of 25Mm Thk Board And All Sides, Shelves, Shutter Etc Made Of 18Mm Thk Board With Pvc Edge Banding. Back In 9Mm Thk Board. Storage Top Shall Be Made From 18Mm Thick Mr Grade Plywood + Laminate Of Grade Ii Type Iii Of Is 12823/Latest. While Rest Of The Sides As Well As Shelves And Shutter To Be Made Up Of 18Mm Thick Mr Grade Plywood + Laminate. Machine Pressed Exposed Edges Shall Be Finished With 2Mm Thick Edge Binding Tape Of Matching Colour And Shade Fixedduly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. Storage Unit With 2 Shutter Construction Is 2 Openable Doors With 2 Fixed Shelves In Provided With A Multi Purposelock For Security And Handles Are Provided For Easy Of Opening. Over All Height Of Product Is @ 1200Mm. Each Shutter Should Be Fixed With Required Numbers Hinges, Ss Tower Bolt Of 100 X 10, Double Strip Magnetic Catcher With Necessary Hardware/ Fitting/ Hinges Etc. Of Approved Quality(Make: Ebco Or Equalant). For Installation Of Side Unit Wooden Dowels And Minifix To Use For Additional Support. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Art Work Panles (Set Of 3) As Per Specification Below: The Art Work Panels Made Up Of European White Ash Veneer Pasted On 17Mm Thick Bwp Plywood, Both Side With 2Mm Thick Flitch On 4 Sides. Base Coated And Printed With Uv Printing Technique With Bb Ultra Flexible Uv Ink , Final Polished With Lacquer. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions : 30.48 Cm (12) W X 228.6 Cm (90) H The Colour & Picture/Painting Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Carpet As Per Specification Below: Material:New Zealand Wool And Silk Construction: Hand-Tufted By Skilled Artisans Backing: Cotton With Latex Adhesive Pile Height: Minimum 10 Mm (Customizable) Design Options: Fully Customizable In Pattern, Color, And Size Durability: High Resilience, Suitable For Moderate To High Foot Traffic Natural Stain Resistance Flame-Retardant And Hypoallergenic Eco-Friendly And Biodegradable Rich, Vibrant Color Absorption *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :2400 Mm X 3000 Mm Or As Required At Site. The Colour & Theme Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Low Height Decorative Partition As Per Specification Below: The Decorative Partition Is Made Up Of 12Mm Thick Acrylic Solid Surface Of Approved Shade Sheet With Cnc Router Cutting And Hand Carved Design Screen/Jali & Frame With 18Mm Bwp Ply Clad With Oak Veneer, Including All Material, Hardware, Fixture, Rounding, Chamfering , Groove, Cutting , Moulding, Finishing, Polishing,Painting, Fastners & Proper Fixing Arrangement At Flooring As Required. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :100Mm(W)*3000Mm(L)*1250Mm(H)Or As Required At Site. For Measurement, Longer Side Face Of Partian Table Will Be Measured Only. The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge. , Supplying, Fixing Andplacing Full Height Decorative Partition As Per Specification Below: The Decorative Partition With 12Mm Thick Acrylic Solid Surface Of Approved Shade Sheet With Cnc Router Cutting And Hand Carved Design Screen/Jali & Frame With 18Mm Bwp Ply Clad With Oak Veneer, Including All Material, Hardware, Fixture, Rounding, Chamfering , Groove, Cutting , Moulding, Finishing, Polishing,Painting, Fastners & Proper Fixing Arrangement At Flooring As Required. *As Per Approved Drawings/Reference Image Given In Technical Specification Of Tender Documents. Dimensions :100Mm(W)*3000Mm(L)*2100Mm(H)Or As Required At Site. For Measurement, Longer Side Face Of Partian Table Will Be Measured Only. The Colour Of The This Unit Shall Be As Per Aai Requirement Suiting The Interior / Architectural Design Of Thevip / Resereved Lounge Of Terminal Bulding To Enhance The Aesthetics / Local Flavour & All Complete As Per Direction & Satisfaction Of Engineer-Incharge.
