Tender For Comprehensive Repair To Certain Md Accn At Peeru / Metha Vihar Under Age B/R-I Of Ge Satwari; 1 Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removingthe rubbish from the work site out side defence premises complete all as specified and as directed. 2 Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 3 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sq.m on surface , removing serviceable tiles to store and rubbish off the Cantt areacomplete all as specified and as directed. 4 Material and labour glazed ceramic coloured tiles in vertical surface300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick Cement mortar 1:4complete all as specified and as directed. 5 Material and labourNon - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and as directed. 6 Material and labourVitrifiedCeramic edge cut coloured or printed any dark shade tiles8-10 mm thick (square/ rectangular) polishedarea of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to matchover and including15 mm thick screed bed in Cement Mortar 1:4 complete all as specified and as directed. 7 Description all as above item No-06 but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thickcomplete all as specified and as directed. 8 M&L 18-20 mm thick Granite (of any type)work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:6complete all as specified and as directed. 9 Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area,complete all as specified and as directed. 10 M&L Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and smooth without using extra cement (up to 2nd storey with necessary scaffolding)complete all as specified and as directed. 11 M&L Rendering cement plaster, 10 mm thick on fair faces of brick/concrete surfacesof wall in cement mortar 1:6 finished even and smooth w/o using extra cementcomplete all as specified and as directed. 12 M&L Rendering 5 mm thick on fair faces of brick or concrete surfaceceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed. 13 M&L for repairing of concrete surfaces such asbalcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4type B-0 or rendering 10-15mm thickas per site requirement in CM 1:3 without using extra cement finished even and faircomplete all as specified and as directed. (Up to fourth storey bldgs and including necessory formwork and scaffolding required as per site condition also taking down or dismantling as required at site. 14 M&L for capillary rise treatment of walls,Base coat: Berger HS Latex plus(or equivalent)Consumption base coat: 0.3 kg/m2 Second and Third coat: Latex sheild 2K(or equivalent) Consumption top coat: 3 kg/m2 System requirements: density: 2.00 kg/ltr; compressive strength: 0.5 N/mm2 complete all as specified and as directed. 15 M&L for water proof cement based putty @ 1kg (undiluted) Per Sqm of average thickness 1 mm over the plastered painted exterior wall surfaces of walls (upto 4th storey with necessary scaffolding ) with including prepartion of surfaces by scarpping to prepare the surface ,and sanding of the putty surfaces with mechanical wall sander (having mechanical vaccum mechanism ) having RPM not less than 1500 ,sanding pads of 240 Grit or above to make the surface free from dust etc by skilled llabour as per following steps:-Steps 1:- Mix the putty powder by adding water as per manufacture instructions and mix it with putty mixer with the mixing capacity of minimum 2.5 kg putty per minute.Step 2:- Apply the first coat of prepared mixer with the manually required help of fully automatic airless spary machine of putty application, finishing the surface even and smooth in level without any undulation.Step 3:- Allow 6 to 8 hour time to dry the putty surface, Apply the further more coat of preparaed mixer with the help of fully automatic airless spary machine of putty application, finishing the surface even and smooth in level without any undulation. 16 Material and labour for one coat of acrylic water based exterior grade primer @ 0.9 ltrs (undiluted) per 10 sqm diluted with water in 1.1 ratio to be applied with fully automatic airless spary machine of paint application with a flow speed of min 1 litres per mintues having a pressure of 3300 PSI and Allow 6 to 8 hours to dry surface for painting of subbsequent coats (walls up to 4th storey with necessary scaffolding)complete all as specified and as directed. 17 Materials and labour for water based preium acrylic smooth Interior emulison of approved colour with solicon additive excellent dirt pick up resistance with low VOC less than 50 Antifugal, Anti Algai properities in two coats @ 1.79 lites (undiluted) per 10 Sqm diluted with water as per manufacture instructions applied over priming surface in betn subsequent coats of paint (upto 4th storey with necessary scaffolding)complete all as specified and directed by Engr-in-Charge.Note for Srl No to of BOQ :- The work for periodical servicesshall include the under mentioned aspects and the rates quoted by the bidder shall includes and the same & nothing extra shall be payable.(a) Work under Srl No 117 to 121of BOQ shall be carried out by the authorrised applicator of manufacture of water based premium acrylic smooth exterior emulison, contractor shall submit a triparty agreement MoU (betn contractor ,said manufactures of and their authorities Appicator ) on Non judicial stamp paper to GE and shall be approved by the GE before commecement of work at site. (b) Work under srl no 117 to 121 shall be carried out up to 4th storey height buildings and the necessary scaffolding , trestles ,ladders ,craddles & safety measures shall be arraged by the contractor for labour and their own & rates quoted by the contractor are inclusive of this aspect.(c) Removing of nails & making good holes, cracks etc. (d) Work in patches and in narrow /widths ,bands ,cornises ,plasters etc shall also be carried out and cutting in edge of line where ncessary. (e) Spreading and removing covering to doors ,windows ,floor ,fittings etc to protect them from splshes.(f) Washing floors , cleaning glass ,joinery ,ele fittings, wiring etc from drops and splashes of paint to be cleaned to the statisfaction of Engineer-in-charge.(g) Sample patch of 10 sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. 18 Materials and labour for water based preium acrylic smooth exterior emulison of approved colour with solicon additive excellent dirt pick up resistance with low VOC less than 50 Antifugal, Anti Algai properities in two coats @ 1.79 lites (undiluted) per 10 Sqm diluted with water as per manufacture instructions applied over priming surface in betn subsequent coats of paint (upto 4th storey with necessary scaffolding)complete all as specified and directed by Engr-in-Charge.Note for Srl No to of BOQ :- The work for periodical servicesshall include the under mentioned aspects and the rates quoted by the bidder shall includes and the same & nothing extra shall be payable.(a) Work under Srl No 117 to 121of BOQ shall be carried out by the authorrised applicator of manufacture of water based premium acrylic smooth exterior emulison, contractor shall submit a triparty agreement MoU (betn contractor ,said manufactures of and their authorities Appicator ) on Non judicial stamp paper to GE and shall be approved by the GE before commecement of work at site. (b) Work under srl no 117 to 121 shall be carried out up to 4th storey height buildings and the necessary scaffolding , trestles ,ladders ,craddles & safety measures shall be arraged by the contractor for labour and their own & rates quoted by the contractor are inclusive of this aspect.(c) Removing of nails & making good holes, cracks etc. (d) Work in patches and in narrow /widths ,bands ,cornises ,plasters etc shall also be carried out and cutting in edge of line where ncessary. (e) Spreading and removing covering to doors ,windows ,floor ,fittings etc to protect them from splshes.(f) Washing floors , cleaning glass ,joinery ,ele fittings, wiring etc from drops and splashes of paint to be cleaned to the statisfaction of Engineer-in-charge.(g) Sample patch of 10 sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. 19 M& L for preparation of old plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 mm thick and one coat of primercomplete all as specified and as directed. 20 M&L Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying one coat of white wash on ceiling,complete all as specified and as directed. 21 M&L Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etcby booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applyingtwo coats of cement base paint on walls, pillars, cornice etc (upto 4th storey with necessary scaffolding)complete all as specified and as directed. 22 M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cmincluding preparation and rubbing with sand paper to make surface even and smoothcomplete all as specified and as directed. 23 M&L Preparation of old painted wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying one coat of synthetic enamel paint on wood surfaces of any description( up to 4th storey with necessary scaffolding) complete all as specified and as directed. 24 Preparation of old painted steel surfaces having width/girth exceeding 10 cm including necessry rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface and applying one coat of synthetic enamel paint on steel surfaces of any description( up to 4th storey with necessary scaffolding)complete all as specified and as directed 25 M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth complete all as specified and as directed 26 M&LMachine cut kota stone slab flooring 18-20 mm thick over and including cement screed bedlaid and jointed cement screed bed laidand jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for tread of staircase over andincluding15mm thick fair and evenscreed bed in CM 1:6 complete all as specified and as directed 27 M&LMachine cut kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for risers of staircase over and including 10mm thick fair and even plaster in CM 1:4 after roughingsurfaces of old concrete/any type of plaster by picking sweeping down with water to remove dust etc complete all as specified and as directed 28 M&L Rendering 15mm thck in CM 1:3 or Plain Cement Concrete as in sunken floorswithout extra cement on walls/floors and including mixing of water proofing compound (WPC shall be measured and paid separately) complete all as specified and as directed 29 M&L for glass fibre reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent).Base coat: Berger HS Latex plus (or equivalent)Consumption base coat: 0.3 kg/m2Reinforcement: Glass fiberSecond and Third coat: Latex sheild 2K (or equivalent)Consumption top coat: 3 kg/m2System requirements: density: 2.00 kg/ltr;compressive strength: 0.5 N/mm2.• Wall penetration through the RCC slab must be sealed using Berger HS RepirO(or equivalent).• Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus(or equivalent) modified mortar with a bonding coat of Berger HS Latexplus(or equivalent) modified cement slurry upto 5ft.• All depressions, unevenness, surface honeycombing shall be repaired using Berger HS Latex plus(or equivalent) modified polymer mortar with a bonding coat of Berger HS latex plus(or equivalent)modified cement slurry.Including cleaning ofRCCsurface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc 30 M&L Cement concrete type E-2, 1:5:10 ( 40 mm graded agregate) in Sunken ( Up to 2nd floor) filling and mass concretecomplete all as specified and as directed 31 M&L 40 mm dia G I tubing medium grade galvanised laid over floors as a spout pipe in sunken floorscomplete all as specified and as directed 32 Taking down shutters of any description exc 1.00 Sqm and not exc. 2.00 sqm each and removing from the sitecomplete all as specified and as directed 33 Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and as directed 34 Taking down chowkats or frames with shutter (without taking off shutter from the frame)exc 1.5 Sqm¬ exc 4 Sqm each including cutting holes for taking out hold fast or dismantling brick workand removing from sitecomplete all as specified and as directed 35 S&F pressed steel framesof size 125mm x 60mm made outof size 1.25mm thick MS sheet for doors double rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixinglugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including PCC 1:3:6 as in back fill to chowkatscomplete all as specified and as directed 36 S&F pressed steel framesof size 105mm x 60mm made outof size 1.25mm thick MS sheet for doors single rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixinglugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including PCC 1:3:6 as in back fill to chowkatscomplete all as specified and as directed 37 Supply and fixing 35mm thick2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitredand rebatedsash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified and as directed 38 S&F Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and as directed 39 S&F Solid PVC Door Frame of size 50mm x 47mm made out ofwood grain printed pvc sheet used instead of plain colour pvc sheet and edges will painted to match with printed sheet fixing in opening in opening as per specifications and drawing including making good to disturbed surface of walls,complete all as specified and as directed 40 S& F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet polyurethne painted on the front face & 2mm plain colour PVC sheet on back face, in frame at sitecomplete all as specified and as directed 41 Demolition ofreinforced cement concrete of any discription including chullah hood,slab in kitchen, ground to 1st floors and removingthe rubbish from the work site out side defence premisescomplete all as specified and as directed 42 M&L for RCC ,nominal mix(1:2:4), type B-1, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like,complete all as specified and as directed 43 M&Lfor TMTmildsteel bars10mm dia and over, cutto length, bentto shape required, including cranking, bendingspirallyforhooping for column, hookingendandbinding withandincludingmildsteelwire(annealed) not lessthan0.9 mm dia or securing with clips,complete all as specified and as directed 44 All as per Srl item No-43 but for 5 mm to 10mm dia for stirrups,ties etc. complete all as specified and as directed 45 Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete,complete all as specified and as directed 46 Use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar workexc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete,complete all as specified and as directed 47 M&L Pressed steel cup board frameof MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats includingbutt hinges 100 mm long. Piano hinges measured separately complete all as specified and as directed 48 M&L Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shuttercomplete all as specified and as directed 49 S&F of continuous (piano) hinges with 30mm width, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed,complete all as specified and as directed. 50 S&F butt hinges of stainless steel medium weight of size 100mmcomplete all as specified and as directed 51 S&F Aluminium anodised, barrel tower boltssize 150 mm of extruded section and fixedcomplete all as specified and as directed 52 S&F Aluminium handles, fabricated type, anodised Size-150mm, anodised section and fixedcomplete all as specified and as directed 53 S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mmwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and as directed 54 S & F hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 75 mm in length complete all as specified and as directed 55 S&F aluminium hanging floor door stopper,Twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc.complete all as specified and as directed 56 Supply and fixing in repair door seal 1.5mm thick stripof mild steelwith hard brush fixed in door bottom . complete all as specified and as directed. 57 Supply and fixingmild steelhelical ordinaryrat tail rod patternsprings300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding workcomplete all as specified and as directed. 58 Taking down of old/unserviceable kitchen cabinet/cupboard including all fixture and fitting, complete all as specified and directed. Note: For measurement superficial area in elevation shall be measured. complete all as specified and as directed. 59 S&F factory made 18mm(+0.7mm) thick celuka PVC ply . One side prelam and other side plain18mm thick Celuka PVC ply for kitchen cabinet shutter/shelf/partitions/drawer andwith each and every supply of the material complete as per manufacturers specifications and drawing andcomplete all as specified and as directed. 60 S&F Aluminium handles, fabricated type, anodised Size-100mm, anodised section and fixedcomplete all as specified and as directed. 61 S&F steel fasteners of size 75mm long drilled and fixed to walls complete all as specified and as directed. 62 M&L magnetic catcher for cabinet/cupboard , complete all as specified and as directed. 63 Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable materialfrom the work site ouside defence premisescomplete all as specified and as directed. 64 M&L Brick work with subclass B bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6complete all as specified and as directed. 65 M&L Brick work with subclass B bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6but except brickscomplete all as specified and as directed. 66 M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4complete all as specified and as directed. 67 M&Lfactory made steel windows/Ventilator double shutter box type, outer frame made out of ERW TUBE P section (60x45x25mm) and shutters of ERW TUBE P section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of Z section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3complete all as specified and as directed.NOTE: The quoted rate against the above item shall also include (i) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (ii) PCC block for embedding lugs. 68 S&F Framed work such as grills, gratings/ tank staging, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. 69 S&F3 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (uptosecond storey with necessary scaffolding),complete all as specified and as directed. 70 S&F 3 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (uptofourth storey with necessary scaffolding),complete all as specified and as directed. 71 Supply and fixing Galvanised mildsteelwire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staplesfixed with stainless steel wire staples complete all as specified and as directed. 72 S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finialsfor 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings) complete all as specified and as directed. 73 Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster/demolition of cement concrete any thickness and removal of debris off the premisesincluding grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust complete all as specified and as directed. 74 M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slopecomplete all as specified and as directed. 75 M&L Rendering 15mm thck in CM 1:4 on Concrete surfaces of rooffinished fair & even and including mixing of water proofing compound (WPC shall be measured and paid separately)complete all as specified and as directed. 76 Supply only Water proofing compound (WPC) liquid complete all as specified and as directed. 77 M&L for water proofing treatment to roof surface (in four coat )with fibre reinforced elastometic liquidwater proofing formulated with PU hybrid polymers and reinforcing acrylic fibres with sun reflective index (SRI)of 100-110 having minimum elongation of 350 % tensile strength 2.9 Mpa and shall have reack bridging ability upto 2,5 mm and shall resist 10 barsof hydrostatics pressure reduce surface temprature upto 10 degree Celsius to RCC roof slabs ,roof treatment shall be carried out in four coat to newly plaster roof surface as per the procedure given below (1) Apply first coat of fibre reinforced elastometic liquid water proofing membrane as described above with 33% dilution as priming coat as directed by Engr-in-Charge and allow it to dry before next coating.(2)Laying second coat of fibre mesh 0.3mm tk weave in leno pattern having wt 45 gms per sqm and pasting it properly with overlap of 50 mm as directed by Engr-in-Charge.and allow it to dry before next coating . (3) Apply third coat of fibre reinforced elastometic liquid water proofing membrane as described in para (a) above but undiluted @ 0.45 ltr per sqm of roof surface as directed Engr-in-Charge and allow it to dry before next coating.(4) Apply fourth& final coat of fibre reinforced elastometic liquid water proofing membrane as described in para (a) above but undiluted @ 0.45 ltr per sqm of roof surface as directed Engr-in-Charge(5) The water proofing treatment shall be carried out by the authorised applicator of manufacturer and shall be approved by the GE before commencement of roof treatment work. 78 M & L for dismantling of water tank of capacity exc 250 & not exc 500 ltrs and removingcomplete all as specified and as directed. 79 Supply and fixing in repair Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connectionscomplete all as specified and as directed. 80 Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 20 mm bore pipe, including making connectionscomplete all as specified and as directed. 81 S&F in repair CP Bib tap(15mm dia) s, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specifiedcomplete all as specified and as directed. 82 S&F in repair CP Bib taps,long body(15mm dia), fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and as directed. 83 S&Fin repair 2 in 1 angle valve with wall flange , cast copper alloy, chromium plated fancy type screwedfor 15 mm iron pipe,complete all as specified and as directed. 84 S&Fin repair angle valve with wall flange , cast copper alloy, chromium plated fancy type screwedfor 15 mm iron pipe, complete all as specified and as directed. 85 S&F in repairSink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flangescomplete all as specified and as directed. 86 S&Fin repair Stop valves(15mm dia) cast copper alloy,fancy type, chromium plated with long shankandcup (concealed type) screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed,complete all as specified and as directed. 87 S&F in repair Central Hole Mixer(15mm dia) cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with lettered Hot and Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and as directed. 88 S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. 89 S&F Towel Ring of CPfixed with and including Chromium plated brass screws and plastic cleats. complete all as specified and as directed. 90 S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . complete all as specified and as directed. 91 S&F in repair Corner Glass Shelf (with Bracket) as percomplete all as specified and as directed. 92 S&F soap container of CP fixed with and including Chromium plated brass screws and plastic cleats complete all as specified and as directed. 93 S&F Shelf of PTMT fixed with and including Chromium plated brass screws and plastic cleats. complete all as specified and as directed. 94 S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and as directed. 95 S&F in repairBrasschromiumplatedshower rosewith or without swivel joints, 125mm size, including fixing to steel pipe or unioncomplete all as specified and as directed. 96 Supply and fixing in repair for bevelled edge mirror of size (600x450mm), selected quality glass approved size , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with SS screws and cup washers complete all as specified and as directed. 97 S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, waste cuppling, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmcomplete all as specified and as directed. 98 S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (30x36x10) fixed with steel fastners or steel screwcomplete all as specified and as directed. 99 S&F in repairVitreous China, wash basin white, flat back , size 600mmx480 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed. 100 S&F in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm L bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair,complete all as specified and as directed. 101 Supply and fixing in repair Vitreous china ware pedestal type water closet white, with P or S trap including self closing seat cover, closed pattern with flat bottom,complete all as directed. (Rate of including in taking out and removal of old WC seat unhygienic condition complete all as specified and as directed. 102 S&F in repair Jet Spray (Stainless Steel) with 1.5 meter Tubecomplete all as specified and as directed. 103 Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respectcomplete all as specified and as directed. 104 S&F in repair WC Orissa pattern white with integral foot rest580x 440 mm including L bend, &PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition)complete all as specified and as directed. 105 Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store,complete all as specified and as directed. 106 Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed 107 Supply and fixing tubes medium grade galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors,complete all as specified and as directed. 108 Supply and fixing tubes medium grade galvanised,20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors,complete all as specified and as directed. 109 M&L cutting chases, pinning in , making good to facings where required and pointing in cement mortar1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting not exc 10cm girth in brick walls complete all as specified and as directed. 110 S&F in repair stainless steel lock grating plain/hole size 100 mmdiaincluding embeding in tiles with white cement complete all as specified and as directed. 111 Dismantling PVC/Cement/CI pipes 50 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from sitecomplete all as specified and as directed. 112 Supply and fixing PVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors,complete all as specified and as directed. 113 Supply and fixing PVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ringjoints fixedto walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed. 114 Supply and fixing PVC (SWR)type B pipes 75 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors,complete all as specified and as directed. 115 Supply and fixing PVC(SWR)type B pipes 75 mm bore single socketed, in any length with rubber ringjoints fixedto walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center ,complete all as specified and as directed. 116 Supply and fixing, PVC (SWR) , bends for75 mm bore ,complete all as specified and as directed. 117 Supply and fixing, PVC (SWR) , bends with access doorfor75 mm bore ,complete all as specified and as directed. 118 Supply and fixing, PVC(SWR) , bendsfor110 mm bore complete all as specified and as directed. 119 Supply and fixing, PVC(SWR) , bends with access door, for110 mm bore complete all as specified and as directed. 120 Supply and fixing, PVC branch piece, single (single Y) with access door for 75 mm borecomplete all as specified and as directed. 121 Supply and fixing, PVC(SWR), junction single,(single T) with access door equal or unequal for 75 mm bore ,complete all as specified and as directed. 122 S&F PVC (SWR) , reducers 110 mm diacomplete all as specified and as directed. 123 S&F PVC (SWR) vent cowl 75 mm diacomplete all as specified and as directed. 124 Supply and fixing in repair UPVC (SWR) floor trap plain having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4)complete all as specified and as directed. 125 S&F in repair,UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified and as directed. 126 M&L Providing cement concrete 1:2:4 type B-0 (using 12. 5 mm graded crushed stone aggregate) in steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneeless apex stones , bed plates, roof padding, kerbs not provided for including weathering, slightly rounded or chamfered angles including necessary formworkcomplete all as specified and as directed. 127 Grubbing up vegetation, small trees. fromroots ,clean the loose dirt with water, and repair the same portion with CM :1:3, tuchup with same finish, area not exc0.10 Sqm eachadjacent to CI pipeupto 4th storeybuilding with necessary scaffolding/ ladder ,complete all as specified and as directed. 128 M&L Cement concrete type 75 mm thick, D- 2, 1:4:8 as in sub base (40mm graded aggregate)complete all as specified and as directed. 129 M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and properembedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed. 130 M&L Cement concrete type 75 mm thick, C- 2, 1:3:6 (40mm graded aggregate)complete all as specified and as directed. 131 Material and labour for Chequered cement concrete tiles 30cm x30cm x 25mm thick, with greay cement and pigment, set, jointed and pointed in neat cement slurry in floors and laid over and including 20mm thick screed bed in Cement Mortar 1:4 etccomplete all as specified and as directed. 132 M&L for 75mm thick cement concrete 1:3:6, type C2, using 40mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cementcomplete all as specified and as directed. 133 Material and labour for precast cement concretelouvers and jallies, 40 mm thick (1:2:4) type B-0 (using 12.5 mm graded aggregate ) set in cement mortar 1:6, including all mouldingsand dismantling old U/s broken Jallies at site,complete all as specified and as directed. 134 M&Lfor 25 mm thick cement concrete 1:2:4,type B-0, (using 12.5 mm graded crushed stone aggregate) as in sub base/ levelling course of floors, finished even and fair complete all as specified and as directed. 135 Taking down carefully aluminium conductor point wiring (light, fan, socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofscomplete all as specified and as directed. 136 Taking down ofunsvSub main wiring of any size complete all as specified and as directed. 137 M & L for complete point wiringwith 1.5 Sqmm single core multi stranded copper conductor FRLSHinsulated and unsheathed meadium duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium gradeISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanisedflush boxes of suitable size and white cover plate with frame as per relevant ISfor mounting modular switches, sockets, fan regulators etccomplete all as specified and as directed. for the following :- 138 One Light / Fan/ Exhaust Fan/call bell point controlled by one, one way switch 6 Ampcomplete all as specified and as directed. 139 One 3 pin socket outlet 6 amp independent complete all as specified and as directed. 140 One 3 pin socket outlet 6 amp same board complete all as specified and as directed. 141 All as per srl item No 137 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and as directed. 142 Supply and fix modular type switch, one way 6 Amps , 1 modulecomplete all as specified and as directed. 143 Supply and fixmodular type socket 3 pin, 6 Amps 2 modulecomplete all as specified and as directed. 144 Supply and fix modular type switch, one way 16 Amps, 1 modulecomplete all as specified and as directed. 145 Supply and fixmodular type socket 3 pin, 6 A/16 Amps2 modulecomplete all as specified and as directed. 146 Supply and fix modular bell push with indicator polycarbonate materials ISI markrd 1 module, 6 Amps 240 Volts complete all as specified and as directed. 147 Supply and fix musical door bell, AC 230 Volts single phasecomplete all as specified and as directed. 148 Supply and fix modular type fan regulator step down 120 Watt, 2 modulecomplete all as specified and as directed. 149 Supply and fix ceiling rose surface, backelite,two/ three terminal, 240 volts complete all as specified and as directed. 150 Supply and fix LED lightfitting 1 x 18Watt, 220V,Batten Integrated type with driver, holder including 18 watt aluminium heat sink & poly carbonate diffuser having high efficiency suited connecting up withthree core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenmentcomplete all as specified and as directed. 151 Supply and fix of lamp holder,PVC /Polycarbonate type with back plate for batten fittingcomplete all as specified and as directed. 152 Supply and fix LED lamp suitable for B22 holder of capacity 7 Watt complete all as specified and as directed. 153 Supply and fix sub main wiring with single core cable 2 x 6 sq mm FRLSHinsulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed)medium grade alongwith 1 x 6 Sq mm FRLSHinsulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surfacecomplete all as specified and as directed.
