Tender For Repair And Painting/ Polishing To Misc Steel & Wooden Furniture Items Including Charpoy Gi Pipe Of Various Units Under Ge New Delhi.; 1 REPAIR TO BED HARD WITH PLY TOP ( FD-246/247) : 2 S&F in replacement of unserviceable top of bed to be made of 12 mm thick (7 Ply) commercial plywood , BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with 25 mm long steel screw without having any joints, (Make : Green ply (Ecotec)/Kitply (Vista) shape and size as per drgand as directed by Engr-in-charge. 3 S&F in replacement of unserviceable long rail, First class hardwood well seasonedteak wood free from cracks and dead knots, shape and size, all as specified on drg and as directed by Engr-in-Charge. 4 S&F in replacement of unserviceable short rail, First class hardwood well seasonedteak wood free from cracks and dead knots, shape and size, all as specified on drg and as directed by Engr-in- 5 HEAD REST : Unserviceable outer ply to be replaced by 3 mm thick ply wood one side teak facedand inner side commercial plywood BWR grade general purpose type confirming to IS 303-1989 and ISI markedincluding teak wood beading all around and 1/2 cut 12 mmdia beading made to shape as shown on drg and directed byEngr-in-Charge. 6 FOOT REST : All as per Srl ItemNo. 1.04 above but foot rest. 7 S&F of MScorner bracket in right angled shape of size 4x4, 6 mm thick with four holesduly painted with black enamel paint after applying the one coat of red oxide be fixed with suitable MS screws to the bed as directed by the Engr-in-Charge. 8 REPAIR TO SOFA SET 3 PCS 5 SEATER (FD- 258/281/373/FD/E6/MAP-II) 9 Arms made of 1st class hard wood (Teak wood) 10 Wooden batten of seat frame made of 1st class hard wood (Teak wood) 11 Wooden batten of back frame made of 1st class hard wood (Teak wood) 12 Front rail of seat of3 Seater Sofa made of 1st class hard wood (Teak wood) 13 Side rail of seat ofsingle/three Seater Sofa made of 1st class hard wood (Teak wood) 14 Front rail of seat ofsingle Seater Sofa made of 1st class hard wood (Teak wood) 15 12mm thick commercial plywood BWR grade for seat of three seater Sofa, FD - 258 16 12mm thick commercial plywood BWR grade for seat of Singleseater Sofa, FD - 258 17 Supplying and fixing in replacement foam cushion (ISI Marked IS-1741) (Make : Kurl-On, Model : Goldline plus or its equivalent in Sleepwell/Feather Foam) 10 Nos in each set for sofa 3 pieces, 5 seater. Size of cushion 22x21x4 thick foam of 40 density for seat& back covered with superior quality tapestry cloth not less than Rs 250 per mtr of premium quality as approved by GE/Engr-in-charge/User. NOTE: The foam cushion in original packing with warranty cardand tapestry cover (with zip opening system) shall be brought separately at furniture yard and after inspection the same shall be fixed. 18 Removing of old unserviceable tapestry cloth from existing foam cushion, supplying and fixing superior quality tapestry cloth, size of the cover should be 22x21x4 with Zip opening system of best quality easy to remove and wash not less than Rs 250 per sqm of premium quality as approved by GE to the foam cushion (10 Nos in each set) as per existing. Complete all as directed. 19 SOFA SET SINGLESEATER (FD-258/281): 20 Supplying and fixing in replacement foam cushion (ISI Marked IS-1741) (Make : Kurl-On, Model : Goldline or its equivalent in Sleepwell/Feather Foam) 02 Nos in each set for sofa singleseater. Size of cushion 22x21x4 thick foam of 40 density for seat& back covered with superior quality tapestry cloth not less than Rs 250 per mtr of premium quality as approved by GE/Engr-in-charge. NOTE:The foam cushion in original packing with warranty cardand tapestry cover with zip (of best quality) opening system easy to remove and wash shall be brought separately at furniture yard and after inspection the same shall be fixed. 21 TABLE DINING FOR 8 PERSONS (FD-273, FD-376): 22 Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminatedboard of approved shade (Make : Bhutan Board/Actiontesa/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints ofexisting frame before fixing the top, shape and size all as specified on drg and as directed by Engr -in-Charge. 23 Long Rail made of Ist class hard wood (Teak Wood). 24 Side Rail made of Ist class hard wood (Teak Wood). 25 Legs made of Ist class hard wood (Teak Wood). 26 REPAIR TO TABLE DINING FOR 6 PERSONS (FD-273): 27 Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF board of approved shade (Make :Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints ofexisting frame before fixing the top, shape and size allon drg and as directed by Engr -in-Charge. 28 Long Rail made of Ist class hard wood (Teak Wood). 29 Short side Rail made of Ist class hard wood (Teak Wood). 30 Legs made of Ist class hard wood (Teak Wood). 31 REPAIR TO TABLE 900X600X760 MM WITHOUT DRAWER (FD-284) 32 Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminatedboard of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post-formed (PFT) including tightening of loose joints ofexisting frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. 33 Legs Made of 1st Class hard wood (Teak Wood) 34 Front Rail Made of 1st Class hard wood (Teak Wood) 35 Side Rail Made of 1st Class hard wood (Teak Wood) 36 Side stiffener lower Made of 1st Class hard wood (Teak Wood) 37 Centre Stiffener Made of 1st Class hard wood (Teak Wood) 38 REPAIR TO TABLE WRITING (FD-275) 39 Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF board of approved shade Make : Action Tesa/Green panel Max (ISI Marked) duly post-formed (PFT)with pvc beading of 2mm on both sides including tightening of loose joints ofexisting frame before fixing the top. 40 Legs made of Ist class hard wood (Teak wood). 41 Front/Back Rail made of Ist class hard wood (Teak wood). 42 Side/Bottom Rail made of Ist class hard wood (Teak wood). 43 Centre Stiffener made of Ist class hard wood (Teak wood). 44 S&F in repair shutters to be made of 18 mm thick prelaminted MDF board of ext grade edging all around with teak wood beading of 4 mm thick with piano type hinges/MS Hinges with approved SS knob/Handle. 45 S&F drawer to be made of sides and back of 12 mm thick teakwood Plank , bottom of 6 mmthick commercial plywood , Front top of 18 mm thick prelaminatedext grade MDF board whatever shown on drg including SS knobs/Handles bears including removing of unserviceable drawer. 46 S&F in replacement of unserviceable back ply shall be 6 mm commercial ply BWR of size as existing. 47 REPAIR TO TABLE SIZE 900MMX600MMX750/760MM WITH DRAWER (FD-283): 48 Removing of unserviceable top in any position, S&F new topmade outof 18/19 mm thickexterior grade MDF prelamintedboard of approved shadeMake: Bhutan Board/Novapan/Green Pannel Max (ISI Marked) duly post formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size complete all as specified on drg and as directed by Engr-in-Charge. 49 Legs made of Ist class hard wood (Teak wood). 50 Front/Rear Rails made of Ist class hard wood (Teak wood). 51 Side Rails made of Ist class hard wood (Teak wood). 52 Centre Stiffener made of Ist class hard wood (Teak wood). 53 S&F in replacement of unserviceable drawers shape and size as shown in drg and as directed by the Engr-in-charge. 54 French polish on old wood surfaces with complete grinding including preparation of old surfaces all as specifiedand filling of cracks with putty.(a) Wood based surface direct to vision glossy shining when placed in position.(b)color of polish as per user requirements of 7.00, 8.00, 9.00 or as approved by Engr-in-Charge. 55 REPAIR TO CHAIR DINING ( FD - 16 (M) /FD - 279) : 56 Rear Legs Made of 1st Class hard wood (Teak Wood) 57 Front legs Made of 1st Class hard wood (Teak Wood) 58 Side rails Made of 1st Class hard wood (Teak Wood) 59 Bend Stiffeners for back rest Made of 1st Class hard wood (Teak Wood) 60 Stiffeners Made of 1st Class hard wood (Teak Wood) 61 REPAIR TO CHAIR WRITING ( FD - 20 (M) FD - 280) : 62 Rear Legs Made of 1st Class hard wood (Teak Wood) 63 Front legs Made of 1st Class hard wood (Teak Wood) 64 Side rails Made of 1st Class hard wood (Teak Wood) 65 Arms Made of 1st Class hard wood (Teak Wood) 66 Stiffeners Made of 1st Class hard wood (Teak Wood) 67 REPAIR TO CHAIR EASY (FD - 17 (M)FD - 229) : 68 Legs Made of 1st Class hard wood (Teak Wood) 69 Side rail for seat Made of 1st Class hard wood (Teak Wood) 70 Front/Back Rail for seat Made of 1st Class hard wood (Teak Wood) 71 Arms Made of 1st Class hard wood (Teak Wood) 72 CHAIR DINING CUSHIONED (FD/MAP/-II/04) 73 Labour for removing the existing worn out/unserviceable seat of Chair dining cushioned and S & F new seat frame of size 460x450 mm made from commercial plywood 12 mm thick and 75 mm thick 40 density foam cushion, duly covered with cloth/Rexine of approved quality and shade, duly stitched and all as directed Engr-in-charge. 74 REPAIR TO CHAIR VERANDAH (FD-256): 75 Removing of existing unserviceable old cane and recaning of Chair Verandah with new plastic white cane of 4.00 mm wide half round cane. 76 M&L for painting of chair Verandah frame with two coats of synthetic enamel paint of white shade Make : Berger/Asian paints after removing the rubber shoes, including preparation of old surface by mild grinding and all as directed by Engr-in-Charge. 77 S&F PVC hard rubber shoesto Chair verandah as approved by Engr-in-charge. 78 CHAIR COMPUTER (TP/ FD/E6/MAP/01) 79 Labour forremoving the existing worn out/ unserviceable seat of chair Computer and S & F new seat frame of size 510x470x60mm made from 12 mm thickHot pressed Plywood with moulded polyurethane Foam 50mm thick with density 50-55 Kg per cubic Mtr, duly upholstered with fabric of approved quality and shade, duly stitched with PVC lipping all round after tightening the existing frame by welding all as directed by Engineer-in-Charge 80 All as per Sl. No. 14.01 but for Back of Chair Computer 510x470x60 complete all as specified and directed by Engr-in-Charge. 81 Removing of unserviceable arms in any position, S&F new armswith nuts and bolts as per drg as directed by Engr-in-Charge. 82 Removing Of Unsv wheel base with twin wheel castors 700mm dia, S&F new Wheel Base as per drg & as directed by Engr-in-Charge. 83 Removing of Unsv hydraulic of chair computer, S&F new hydraulic of chair computer as directed by Engr-in-Charge. 84 REPAIR TO TABLE COMPUTER (FD/E6/MAP/03) 85 Removing of unserviceable top of Table computer in any positon, S&F new top/bottom made out of 18/19 mm thick Ext gradeMDFboard of existingshade Make : Action Tesa/Green panel Max (ISI Marked) with 2mm thick PVC edging to be fixed with steel corner bracket complete all as specified and as directed by Engr -in-Charge. 86 All as per Ser No. 15.01 above but bottom complete all as specified and as directed by Engr -in-Charge. 87 Removing of unserviceable channels in any position, S&F new SS telescopic channels with screws(ISI Marked) complete all as specified and directed by Engr-in-Charge. 88 S&F new SShandles for drawers of approved shape and size complete all as specified and as directed by Engr-in-Charge 89 REPAIR TO TABLE BED SIDE (FD-276) : 90 Back ply of Table bed side 6mm commercial ply (Kit ply/Archid Ply/Green Ply) complete all as specified and as directed by Engr-in-Charge 91 Left or right side of Table Bed side of ext grade Prelaminted MDF Board 18/19 mm Make: Action Tesa/Green panel Max (ISI Marked) complete all as specified and as directed by Engr-in-Charge 92 Shelf of Table Bed side of ext grade Prelaminted MDF Board 12 mm Make: Action Tesa/Green panel Max (ISI Marked) complete all as specified and as directed by Engr-in-Charge 93 Top of Table Bed side of ext grade Prelaminted MDF Board 18/19 mm Make: Action Tesa/Green panel Max (ISI Marked) complete all as specified and as directed by Engr-in-Charge 94 Bottom Shelf of Table Bed side of ext gradePrelaminted MDF Board 18/19 mm Make: Action Tesa/Green panel Max (ISI Marked) complete all as specified and as directed by Engr-in-Charge 95 REPAIR TO TABLE PEG (FD-384/277): 96 Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminatedboard of approved shade (Make :Action Tesa/Novapan) (ISI Marked) duly post-formed (PFT) with PVC beading of 2mm on both sides including tightening of loose joints ofexisting frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. 97 Legs made of Ist class hard wood (Teak Wood). 98 Long Rail made of Ist class hard wood (Teak Wood). 99 Side Rail made of Ist class hard wood (Teak Wood). 100 REPAIR TO TABLE CENTRE (FD-274): 101 Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminatedboard of approved shade (Make :Action Tesa/Novapan) (ISI Marked) duly post-formed (PFT) with PVC beading of 2mm on both sides including tightening of loose joints ofexisting frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. 102 Legs made of Ist class hard wood (Teak Wood). 103 Long Rail made of Ist class hard wood (Teak Wood). 104 SideRail made of Ist class hard wood (Teak Wood). 105 REPAIR TO TEAPOY WOODEN (FD-232/278/382): 106 Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminatedboard of approved shade (Make :Action Tesa/Novapan) (ISI Marked) duly post-formed (PFT) with PVC beading of 2mm on both sides including tightening of loose joints ofexisting frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. 107 Legs made of Ist class hard wood (Teak wood). 108 Long rail made of Ist class hard wood (Teak wood). 109 Short rail made of Ist class hard wood (Teak wood). 110 TEAPOY VERANDAH. (FD/E6/MAP/17): 111 Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminatedboard of approved shade Make : Action Tesa/Green Panel Max (ISI Marked) duly post-formedincluding gas welding of loose joints ofexisting frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. 112 M&L for painting ofTeapoy Verandah steel frame with two coat of synthethic enamel paint of black shade of Make : Berger/Asian paints after removing the rubber shoes including preparation of old surface by mild grinding, all as specified and directed by Engr-in-Charge. 113 REPAIR TO HAT STAND WITH MIRROR (FD-233 ): 114 S & F Peg hook brass as per drg complete all as specified and as directed by Engr -in-Charge. 115 S&F in replacement of unserviceable mirror with new mirror 5 mm thick of make : Atul/Modiguard/Saint Gobain complete all as specified and as directed by Engr -in-Charge. 116 M&L in replacement of unserviceable front ply and S&F new ply 3 or 4 mm thick one side teak faced duly polished with french polish complete all as specified and as directed by Engr -in-Charge. 117 M&L in replacement of unserviceable Back ply and S&F new ply 3 or 4 mm thick one side teak faced duly polished with french polish complete all as specified and as directed by Engr -in-Charge. 118 REPAIR TO TV TROLLEY (FD/E6/MAP/04(R): 119 Removing of unserviceable top of TV Trolley in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF board of existingshade Make : Action Tesa/Green Panel Max (ISI Marked) to be fixed with steel corner bracket as directed by Engr -in-Charge. 120 All as per ser No 22.01 above but left/right side of TV Trolley 121 All as per ser No 22.01 above but back side of TV Trolley 122 All as per ser No 22.01 above but Bottom side of TV Trolley 123 S& F in replacement of unserviceableRollers to the base of the TV Trolley 124 S&F in replacement of unserviceablefront shutter glass with fitting arrangements 125 Removing of unserviceable channels in any position, S&F new SS channels with screws(ISI Marked). 126 S&F new SShandles for drawers of approved shape and size as directed by Engr-in-Charge 127 REPAIR TO BIN SOILED LINEN (FD- 244) 128 Removing of unserviceable Bottom frame of with legs, S&F new bottom frame made of hard teak wood well seasoned duly polished to bin soiled linen as specified in drg or as directed by Engr-in-Charge. 129 S&F in replacement of unserviceable front and back ply with new 6 mm commercial ply one side teak faced all as specified and as directed by Engr-in-Charge. 130 S&F in replacement of unserviceable top ply with new 6 mm commercial ply one side teak faced all as specified and as directed by Engr-in-Charge. 131 REPAIR TO BIN LINEN MULTIPURPOSE (FD/E6/MAP/09) 132 Removing of unserviceable Bottom frame of Bin Multipurpose and S&F new bottom frame made of hard teak wood well seasoned dulyas specified in drg or as directed by Engr-in-Charge. 133 S&F in replacement of unserviceable top and bottom made of 18mm thick pre laminated MDF board Ext Grade all as specified and as directed by Engr-in-Charge. 134 S&F in replacement of unserviceable side partition, shelves, drawers with channel made of 18mm thick pre laminated MDF board Ext Grade all as specified and as directed by Engr-in-Charge. 135 S&F in replacement of unserviceable back of the Bin multipurposewith new 12 mm thik commercial ply woodall as specified and as directed by Engr-in-Charge. 136 S&F in replacement of unserviceable handles for (shutter & drawers) 75mm long SS handle all as specified and as directed by Engr-in-Charge. 137 S&F in replacement of unserviceable shutter fitted with piano hinges made of 18mm thick pre laminated MDF board Ext Grade all as specified and as directed by Engr-in-Charge. 138 REPAIR TO TABLE DRESSING GENTS WITH MIRROR (FD-230) 139 S&F unserviceable looking mirror 5 mm thick Make : Modi Guard/Atul/Saint Gobain along with new 6 mm thick commercial plywood back of mirror frameincluding two coats of French Polish to all parts asshown on drg andasdirected by Engineer-in-Charge. (Make of ply: Kit Ply/Green ply/Archid ply) 140 S& F new drawers made of Ext grade MDF to match the existing as per drawing and as directed by Engineer -in-Charge. 141 Top/bottom made of 12mm thick Ext grade Prelaminated MDF board as shown in Drg complete all as specified and as directed by Engr-in-Charge. 142 Sides/partition of box of Table dressing made of 12 mm thick Exterior grade MDF board as shown in Drgcomplete all as specified and as directed by Engr-in-Charge. 143 REPAIR TO TABLE DRESSING LADIES WITH MIRROR (FD-251/378): 144 S&F unserviceable looking mirror 5 mm thick Make : Modi Guard/Atul/ Saint Gobain along with new 6 mm thick commercial plywood back of mirror frame all as specified shown on drg andasdirected by Engineer-in-Charge. (Make of ply : Kit Ply/Green ply/Archid ply) 145 S&F Glass panes of shutters made of5mm thick plane glass as existing of Make: Modiguard/Saint Gobain with aluminium sliding all as per drg and as directed by Engr-in-Charge. 146 S&Fnew 1st Class hard wood (Teak Wood) Frame for 5mm thick mirror of dressing table ladies complete as per drawing and as directed by engr-in-Charge. 147 S& F new drawers as per drawing complete all as specified and as directed by Engr-in-Charge. 148 REPAIR TO TABLE DRESSING LADIES WITH MIRROR (FD/MAP-II/07) 149 S&F unserviceable looking mirror 5 mm thick Make : Modi Guard/Atul/ Saint Gobain along with new 6 mm thick commercial plywood back of mirror frame all as specified shown on drg andasdirected by Engineer-in-Charge. (Make of ply : Kit Ply/Green ply/Archid ply) 150 REPAIR TO MIRRORDRESSING GENTSFD/E6/MAP/16 151 S&F unserviceable looking mirror5 mm thick Make : Modiguad/Atul/Saint Gobain alongwith new 6 mm thick commercial plywood back of mirror frame all as shown on drg andasdirected by Engineer-in-Charge. 152 REPAIR TO ALMIRAH MED STEELFD-1032 : 153 Dismantling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxideprimerof 1 mm thickPBI sheet by weldingand finishing with mild griding and as directed by the Engr-in-Charge. 154 S&F new shelves made of 1 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxideprimer, shape and size as specified on drg complete and as directed by the Engr-in-Charge. 155 Dismantling of unserviceablebushes of lockingassembly and S&F new MS bushes of locking assemblyas directed by Engr-in Charge. 156 Dismantling of unserviceable locking assembly with complete mechanism and S&F new MS locking assembly with base plate (Complete mechanism) with upper and lower bars without lock as shown in drg or as directed by Engr-in Charge. 157 Denting/bending/welding, repairs of damaged parts,fixing loose shelves, complete removal of existing coat of paints filling, finishing and painting with mild grinding of Almirah Medium steel with two coats of synthetic enamel paintof approved colour (Make: Berger/ Asian Paint) with sprayand as directed by Engr-in-Charge. 158 REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES & 1/2H, 1/2 SHELVES, FD/E6/MAP/18,FD-1031: 159 Dismantling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxideprimer be of 1 mm thickPBI sheet by weldingand finishing with mild griding and as directed by the Engr-in-Charge. 160 S&F new shelves made of 1 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxideprimer, shape and size as specified on drg complete and as directed by the Engr-in-Charge. 161 Dismantling of unserviceablebushes of lockingassembly and S&F new MS bushes of locking assemblyas directed by Engr-in Charge. 162 Dismantling of unserviceable locking assembly with complete mechanism and S&F new MS locking assembly with base plate (Complete mechanism) with upper and lower bars without lock as shown in drg or as directed by Engr-in Charge. 163 Dismantling of existing unserviceable CP handles and S&F new CP handles for Almirah Medsteel/ almirah large steel of approved quality complete all as specified and as directed by Engr-in-Charge. 164 Dismantling of unserviceable locks of Almirah and S&F new locks of approved brand as specified and shown in drg complete all as specified and as directed by Engr-in-Charge. 165 S&F of cleats shall be made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete all as directed. 166 Denting/bending/welding, repairs of damaged parts,fixing loose shelves, complete removal ofexisting coat of paints filling, finishing and painting of Almirah Large steel with two coats of synthetic enamel paint of approved colour (Make: Berger/ Asian Paint) with spray and as directed by Engr-in-Charge. 167 REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220)- 168 Removing of old unserviceable ply top from existing charpoy GI pipe ply top and S&F the new 12mm thickBWRcommercial plywood with unpolished edging(ISI marked) suitable for charpoy GI pipe having approximante size 1980mm x 900mmx12mm with mild steel galvanised iron nuts and bolts of size 70mm x 06mm with GI washer (Heavy Weight) complete all as directed. (Make of Plywood :- Green ply (Ecotec)/Archid ply (Classic) 169 M&L dismentling of existing unservicable broken long rail and S& F new long rail of GI pipe Med grade 32 mm boreISI marked including threading at both endscomplete all as specifiedand directedMake : Jindal/TATA/BST 170 M&L dismentling of unserviceable short rail and cutting of old long rail from Srt No. 31.02 to the required size for short rail including rethreading at both ends complete all as specified. 171 Removing of Old u/s legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 31.03 aboveby cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge. 172 M&L dismentling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitble for GI pipe med grade 32 mm bore pipe complete all as specified and directed. 173 S&F in replacement of unserviceable check nut 6 mm thick suitable for 32 mm bore to GI pipe charpoy of approved make complete all as specified. 174 Supply and fixing flat MS iron 02 Nos of size 50mmx6mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts, bolts and washers on both sides of flat MS iron and including preparation of surface and applyingtwo coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge.Note : One Number of MS flat iron strip 50mmx6mmx900mm long is measured as one unit. 175 Supply and fixing MS Iron Strips 08 Nos of size 50mmx6mm, 75mm long duly holed/drilled for tightening plywood and strip with countersunk screws/suitable nuts, bolts and washers and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge.Note : One Number of MS flat iron strip 50mmx6mmx75mm long is measured as one unit. 176 REPAIR TO BED HARD PLY TOP STEEL (FD/E6/MAP/08(R) : 177 S&F in replacement of unserviceable top of bed hard steel to be made of 12 mm thick (7Ply) commercial plywood BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with appropriate sizes of SS nuts & boltswith washers without having any joints after tightening of frame by welding. make : Green ply (Ecotec)/Archid ply (Classic) shape and size as per drg and as directed by Engr-in-Charge. 178 REPAIR TO HEAD BOARD : Removing of unserviceable board of head rest and S&F new board of Head restto be made of 18 mm thick Ext grade MDFboard of approved shade duly covered with PVC beading 2 mm thick all around (Make : Action Tesa/Green Pannel Max)of size with suitableScrews with the cleats as specified on drg and asdirected by Engineer-in-Charge. 179 REPAIR TO FOOT BOARD :All as per Srl item No. 32.02 but for foot board. 180 M&L for scraping of existing coat of paints complete filling, finishing and painting of Bed Hard steel with two coats of synthetic enamel paint in black shade(Make: Berger/ Asian Paint)and as directed by Engr-in-Charge. 181 S&F new PVC hard Rubber Shoes as per drg and as directed by the Engr-in-Charge. 182 REPAIR TO CHARPOY IP WITH HARD TOP (FD/MAP-II/01) 183 Removing of old unserviceable ply top from existing charpoyand S&F the new 12mm thickBWRcommercial plywood with unpolished edging(ISI marked) suitable for charpoyhaving approximante size 1980mm x 900mmx12mm with mild steel galvanised iron nuts and bolts with GI washer (Heavy Weight) complete including tightening of loose joints with gass welding of existing frame before fixing the ply all as per drg amnd as directed. 184 Repairs of damaged parts,scraping of existing coat of paintsfiling, finishing and painting of Charpoy IP with two coats of synthetic enamel paint in black shade(make Berger/AsianPaint) and as directed by Engr-in-Charge. 185 S&F hard PVC shoes of best quality as approved by Engr-in-Charge. 186 REPAIR TO RACK SHOE STEEL(FD/E6/MAP/02 (R ) 187 Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Chargeby spraying machine all as specified and directed for the Engr-in-Charge. 188 REPAIR TO TABLE 900MMX600MMX760MM STEEL WITH & WITHOUT DRAWERFD-1007/1008 : 189 Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminatedboard of approved shade Make :Action Tesa/Novapan (ISI Marked) duly post-formed(PFT) including welding of loose joints ofexisting frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. 190 S&F New drawers with locking deviceappropriate size of sheet as existing, as per drg and as directed by Engr-in-Charge. 191 Removing of existing coat of paint from steel parts by scraping, filling and repainting after removing the unserviceable PVC shoes, with two coats synthetic enamel paintof approved shade using spray (Make: Berger/ Asian Paint) complete all as directed by Engr-in-Charge 192 S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge. 193 REPAIR TO TABLE 900MMX900MMX760MMSTEEL FD-1009: 194 Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminatedboard of approved shade Make : Action Tesa/Novapan (ISI Marked) duly post-formed (PFT) including welding of loose joints ofexisting frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. 195 Removing of existing coat of paint from steel parts by scraping, filling and repainting after removing the unserviceable PVC shoes, with two coats synthetic enamel paintof approved shade using spray (Make: Berger/ Asian Paint) of as directed by Engr-in-Charge 196 S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge. 197 REPAIR TO TABLE OFFICE CLERK STEEL FD-381 : 198 Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminatedboard of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post-formed (PFT) including welding of loose joints ofexisting frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. 199 S&F New drawers with appropriate size of sheet as existing, with locking device as per drg and as directed by Engr-in-Charge. 200 Denting/bending/rewelding Repairs of broken joints, drawersof table and removing of existing coat of paint on steel parts by scraping, filling and repaintingtwo coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) using sprayper speciaification and as shown on drg and directed by Engr-in-Charge. 201 S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge. 202 REPAIR TO LOCKER BED SIDE STEEL FD-1029 203 M&L dismentling of existing unserviceable Handles and S&F new handles CP steel 75mm long with suitable SS screws of approved quality complete all as specified and directed by Engr-in-charge. 204 M&L dismentling of existing unserviceable Hasp and Stapple and S&F newHasp & staple of size 75x40x3mm thick stainless steel with suitable boltand nuts complete all as specified and directed by Engr-in-charge. 205 M&L dismentling of existing unserviceable legs and S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxideprimer be of1 mm thickPBI sheet by welding and finishing with mild grinding as per drg and as directed by the Engr-in-Charge. 206 Denting/bending/welding, repairs of damaged parts, fixing loose shelves and complete removal of existing coat of paints filling, finishing and painting of locker steel with two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with sprayand as directed by Engr-in-Charge. 207 REPAIR TO TABLE BED SIDE STEEL FD/E6/MAP/15(R) Removing of unserviceable components in any position, S&F new componentsmade outof 18/19 mm thickexterior grade MDF board of approved shadeMake: Action Tesa/Green Panel Max(ISI Marked)including tightening of loose joints of existing frame before fixing the sides with steel corners and screws make the unit in serviceable from srl No. 40.01 to 40.08 shape and size all as specified on drg and as directed by Engr-in-Charge. 208 Sides of Table Bed side made of MDF Board ext grade 209 Back of the table bed side made of MDF Boardext grade 210 Top of the table bed side made of MDF Board ext grade 211 S&F new top drawers made of MDFBoard of exterior grade. 212 S&F new top drawers made of MDFBoard of exterior grade. 213 Removing of unserviceable channels in any position, S&F new SS telescopic channels with screws(ISI Marked). 214 S&F new SShandles for drawers of approved shape and size as directed by Engr-in-Charge 215 S&F hard PVC shoes of best quality as approved by Engr-in-Charge. 216 REPAIR TO CHAIR WRITING STEEL(TP/ FD/E6/MAP/12 ) 217 Labour forremoving the existing worn out/ unserviceable seat of chair Writing and S & F new seat frame of size 500x450mm made from 12 mm thickHot pressed Plywood with moulded polyurethane Foam 50mm thick with density 50-55 Kg per cubic Mtr, duly upholstered with fabric of approved quality and shade, duly stitched with PVC lipping all round after tightening the existing frame by welding all as directed by Engineer-in-Charge. 218 All as per Sl. No. 40.01 but for Back of Chair Writing of size 500x450mm 219 S&F Rubber Stoppers with appropriate size of MS screws 220 Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Chargeby spraying machine all as specified and directed for the Engr-in-Charge. 221 Repair to Chair CBA steel with Arms (FD-75) 222 Labour forremoving the existing worn out/ unserviceable seat of chair CBA steel and S & F new seat frame of size 460 x 420 mm made fromcommercial plywood 12 mm thick and 50 mm thick 32 Dfoam cushion, duly coveredwith cloth /rexine of approved quality and shade, duly stitched all as directed by Engineer-in-Charge. 223 All as per Sl. No. 41.01 but for Back of Chair padded Steelof size 460x380mm 224 M&L for welding with 25 x 3.0 mm MS flat iron 510 mm long with holes to fixNuts and bolts to seat/back frame for fixingsheet/back frame including nuts complete all as specified and as directed for Chair CBA Steel (FD 75 (M) 225 S&F new PVC Caps. 226 S&F new PVC arms as per sample. 227 Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Charge over one coat of red oxide primer by spraying machine all as specified and directed for the Engr-in-Charge. 228 Labourfor removing the U/S worn out / brokencane & re-canningwith new plasticcane of not less than1.8 mm widex 0.46mm thick and border caning atleast 3.5mm wideas per Godrej pattern including total scrubbing & cleaning of surfacesfor chair dining, chair writing, chair easy, stool dressing, Bin soiled linen,etc. complete all as specified and as shown in drgs. and as directed by Engineer-in-Charge. 229 Labourfor cleaning, mild/complete grinding and preparation of old treated wooden surfaces of any description, filling of cracks with putty and applying two coats of french polishfor the following wooden furniture all as shown in drgs in any colour/shade as directed by Engineer-in-Charge (including polishing at site) 230 Bed plywood top FD - 213/246 231 Chair Easy FD -229 232 Chair WritingFD - 20(M)/280 233 Chair Dining FD - 16/279/MAP 234 Table dining 6/8 pers FD-30/239/273 235 Table 900x600x760mm w/drawer FD-41/283 236 Table writing FD - 33/275 237 Peg tableFD - 25/277 238 Table bed side FD - 28/276 239 Table dressing LadiesFD- 251 240 Table centre FD-214/274 241 Sofa set 5 seater FD - 281/373/258 242 Sofa Chair single seater ( FD-281/373/258) 243 Hat stand FD-206/233/362 244 Teapoy wooden FD-232/278/382 245 Chair dining cushioned MAP 246 Book case FD-356/FD-90 247 Side board FD-241
