Tender For Certain Repairs To Otm Accommodation And Allied Works Pertain To B1 And B3 Area Of Age B/R-Ii Under Ge (W) Jrc; 1 M&L preparation of old decorated surface of wall and applying onecoat of cement base paint complete all as specified and as directed by Engineer-in-Charge. 2 M&L preparation of old decorated surface of wall applying onecoat of white wash complete all as specified and as directed by Engineer-in-Charge. 3 M&L preparation of old decorated surface of wall applying onecoat of colourwash complete all as specified and as directed by Engineer-in-Charge. 4 M&L preparation of old decorated surface of wall applying onecoat of oil emulsion distempercomplete all as specified and as directed by Engineer-in-Charge. 5 Complete removal of existing treatment on wall andapplying Two coat of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge. 6 M&L preparation of old decorated surface of ceiling applying onecoat of white wash complete all as specified and as directed by Engineer-in-Charge. 7 M&L for Preparation of old steel surface of any description over 10 CM width or girth and applying one coats of synthetic enamel paintcomplete all as specified. 8 M & L forPreparation of old wood and wood basedsurfaces of any description over 10CM width or girth and applying one coat of synthetic enamel paint complete all as specified. 9 Taking down cement plaster on brick wall upto any height(max of triple storey) includingraking out joints hacking for key srcubbing down with water complete all as specified and as directed. 10 M&L15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cement complete all as specified and directed. 11 M&L15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace rendering is to be even and smooth with out using extra cement complete all as specified and directed. 12 M&L 5 mm thick cement plaster in cement mortar 1:3 on celling surfaces finished even and smooth without using extra cement complete all as specified and directed. 13 M&L for repairing of RCC projection of chhajjas, roof, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh weighing 2 to 3 kg per Sqm as per requirement and finishing the surfaces even and smooth with cement and sand mortar (1:3), 5 mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed by Engr-in-Charge. (Note: Welded Mesh to paid separately) (The rate quoted by the contractor shall be included for scaffolding etc) (EIC shall ensure to get the complete work executed against this term before submission of completion). 14 Grubbing up bushes or tree trunk of grith n exc 10cm including taking/digging out roots and making good disturbed portion of wall with PCC 1:3:6 type C-1 and removing of unserviceable material to a distance n exc 50 m and clearing site complete all as specified and directed. 15 M & L for Preparation of old stone/concrete surface of any description over 10 CM width or girth and applying one coats of synthetic enamel paint (in alternate colours if required as per site)complete all as specified. 16 M&L for Preparation new surface of wall and applying two coat of oilemulsion distemper over a coat of wall putty complete all as specified and directed. 17 M&L for preparing new plasteredsurfaces of wall and applying 2 coats of cement based paint over a coat of cement primer. 18 M&L for three coats of white wash on newly plastered surfaces of celling including prepration of surfaces complete all as specified and directed. 19 M&L for writing letters and figures (Block romon italic or indian) n exc 30 cm high complete one set at one place with synthetic enamel paint complete all as specified and directed. 20 Removing existing paint by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism)having RPM between 600-1500, sandingpaper of 60/80 Grit having dia of 7/9to make thesurface free from dust, loose paintetc. by skilled labour complete all as specified and as directed by Engineer-in-Charge. 21 M&L for white cement based putty @ 1.0 Kg (undiluted) per sq mtr. of average thickness 1 mm, of Asian Paints or its equivalent over the plastered/ old painted wall after scrappingto prepare the surface even and smooth complete.Step1 : Mix the puttypowder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer withmin 1400 W power havinng mixer rod of industrial stell grade 45 with themixingcapacity of min 2.5 kg putty per minute) or equivalentStep 2 : Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application ofAsian Paints Trucare Graco Spray Machine (Model: EH 230 DI) or equivalanthaving a DC electric motor of 3.3 KW having flow speed of 6 ltrs per minutes with a maximum pressure 227 bar havingmaximum tipsize 0.039Step 3: Allow 6-8 hrs time to dry the putty surface.Step 4:Apply second coat of the prepared mixer manuallytomake to smooth to make the finish even.Step 5:Allow 6-8 hrs time to dry the putty surface complete all as specified and as directed by Engineer-in-Charge. 22 M&L for sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01or equivalent (having mechanical vacuum mechanism)having RPM between 600-1500, sanndingpaper of 180 Grit having dia of 7/9to make thesurface free from dust etc. by skilled labour complete all as specified and directed. 23 M&L for two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machineofpaint application of Asian Paints Trucare Graco or equivalant having an electric motor of min.1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs todry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge. 24 M&L for two coats of premium acrylic smooth exterior paint with silicone additives of required shade( two or more coats applied) @ 1.43 kgs /10 sq mtrs over and incl priming coat of exterior primer applied@2 .20 kgdilutedwith fully automatic airless spray machineof paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 2 ltr per minutehaving a pressureof3300PSI.Allow 6-8 hrs todry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge. 25 Dismantling of wall and ceiling board in any thickness including cover fillets complete all as specified and as directed by Engineer-in-Charge. 26 S&F 4mm thick of size 600x600mm HSPC (high pressure steam cured) pre-primetred self embossed textured designer E-clasic board to be fixed to GI powder coated grid/section size 600x600with main runnder 38mm x 24mm x 0.9mm and wall angle 19mm x 0.9mm and duly suspended with 4mm dian GI bar hangers @1200mm centre to centre bothways fixed with steel dash fasteners or from purling/roof with alignment clip incl providing provn for light fixtures of any size complete. 27 Supply & fixing false ceiling atall heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated perforated 12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 28 Supply and fixingPVC wall lining/ panelling consisting of 5mm thick single side prelamPVC sheetinstead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame and plugging to brick wall with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing including necessary cutting for electrical fittings as per site requirment complete all as specified and as directed. 29 Dismantlingof brick tiles single layer as in roofcovering complete all as specified. 30 Demolition of mud in roofs any thicknessincludingplastering and leeping(whether full thickness removed or only a part thereof) all as specified. 31 Roughening for old concrete surface/floor by picking, weeping clean and washing with down with water to remove dust including brushing neat cement slurry with 3.00 Kg of cement per sqm etc. 32 M&L for PCC 1:2:4 type B-1 as roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified. 33 M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm incl cleaning surfaces complete all as specified. 34 M&L for fixing APP based polymeric membrane minimum weighing 3.60 kg/sqm and min 3mm thick reinfirced with polyster noin wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application. 35 M&L 40mm thick brick tiles laid cement mortar bed 1:6 , 15 mm thick and joints grouted flush mortar 1:3 mixed with 5% crude oil by weight of cementcomplete all as specified and directed. 36 All as per item No 35.00 above but except tiles. 37 M&L Flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified. 38 Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specifiedand directed. 39 M&L 15mm thick screed bed or bedding layer of cment mortar 1:6 to laying floor finish. 40 M&L non skid ceramic colour tiles 7 to 8 mm thickjoint free edge cut(square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm(400mmx400mmx7 mmthick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and as directed. 41 All as per ser item No 40.00 above but in skirting and dado including rendering/screeding including cement mortar 1:4, 10mm thick complete all as specified and as directed. 42 M&L vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed incolour cement to match complete all as specified and directed. 43 All as per ser item No 42.00 above but in skirting and dado including rendering/screeding including cement mortar 1:4, 10mm thick complete all as specified and directed. 44 M&L glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and as directed. 45 M&L for 20mm thick granite black slab, machine cut, well polished, bedded in 15mm thick in CM 1:4 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement(1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed. 46 M& L for machine cut kota stone slab flooring18-20mm thick over and incl 20mm thick cement screed base laid in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing complete all as specified and directed. 47 All as per ser item No 46.00 above but in skirtingincl 15mm thick screed in cm 1:3 and taking down cement mortar complete all as specified and directed. 48 Dismantling plain corrugated asbestos /translucent sheet in roof covering incl redges 49 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of ancolour having tensile strength of 550 Mpa and finishing with resin coat on both surfaces @ 150 gm/sqm of coating as in roof covering /cladding to wall fixed with selftapping screws as specified. 50 S&F Pre-painted galvalume aluminium zinc coating GI based plain steelsheet 0.50 mm thick of ancolour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with selftapping screws as specified. 51 S&F 6mm thick asbestos cement corrugated or semi corrugated sheet in roofs fixed with L type or J type hook bolts complete all as spd. 52 M&LPCC 1:2:4 Type B0 (using 12.5 mm graded aggregate as) roinded or chamfered as in benching, coping,roof curves, mud stops complete all as specified and directed. 53 Demolition of brick built in cm including all quoins arches pillars etc. 54 M & L brick work with sub class B bricks in CM 1:6, straight or curved on plan exc 6 mtr mean radius, using old size bricks. 55 M & L brick work with sub class B bricks in CM 1:6, straight or curved on plan exc 6 mtr mean radius, using old size bricks but except bricks. 56 Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 15 mm dia bore. 57 Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 20 mm dia bore. 58 S&F 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbowssockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc. 59 S&F 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbowssockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc. 60 Refixing only 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbowssockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc. 61 Refixing only20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbowssockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc. 62 Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth. 63 S&F in repairs 15mm dia bore stop cock concealed type cast copper alloy chromium plated fancy type with long shank & cup complete all as specified and as directed. 64 S&F 15mm dia boreangle cock two way Cast copper alloy chromium plated, fancy type with long shank & cup all as specified and fixed in repairs. 65 S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed. 66 S&F in repairs 15mm dia bore stop cock /Angle valves cast copper alloy chromium plated fancy type with long shank & cup complete all as specified and as directed. 67 S&F in repairs 20mm dia bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified. 68 S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed. 69 S&F in repairs vitreous china wash down water closet (Pedastal pattern) white (excluding flushing cistern and flush pipe ) including connection todrain or out going pipe andto flushing pipe anti syphonage pipe and making good to floorcomplete all as specified and as directed. 70 S&F in repairs vitreous china squatting pan ORISSA PATTERN size 580mmx440mm white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed. 71 S&F in repairsbrass chromium plated jet/health faucet for pedestal pattern water closet includingPVC flexible pipealongwith complete necessary fittings all as specified and directed by the Engr- in- Charge. 72 Supply & fix only water closet seat cover, white closed pattern with flat bottm & cover for EWC complete all as specified and as directed. 73 S&F in repair vitreous china wash handbasinwhite flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and excluding fixing of tap waste fitting and union complete all as specified and as directed. 74 S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed. 75 S&F in repair 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered Hot or cold with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed. 76 S&F in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed. 77 S&F in repair 600mm x450mm looking mirror 5mm thick of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass and cup washer complete all as directed. 78 S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as directed. 79 S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls as directed and approved complete all as specfied. 80 S&F stainless steel soap dish complete all as specified. 81 S&F 4mm thick superior qualitystraight shelve , made of transparent toughened glass, size 60cm longcomplete all as specified and as directed. 82 S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge. 83 All as per ser item No 82.00 above but 1000 ltr capacity complete all as specified and as directed. 84 S&FBall brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20mm bore. 85 Taking chowkhat or frame with shutters (with out out taking off the shutter from the frame) n. exc 1.5 Sqm each complete all as specified and as directed. 86 All as per ser item No 85.00 above but exc 1.5 sqm but ont exc 4 Sqm each complete all as specified and as directed. 87 Taking down shutter refixing aftereasing, adjusting areaexc 1 Sqm but not exc 2 sqm each complete all as specified and as directed. 88 Taking down shutterareaexc 1 Sqm but not exc 2 sqm each complete all as specified and as directed. 89 S&F prelaminatedsolid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and as directed. 90 S&F factory made solid panel prelaminatedpvc door shutter 30mm thick (style) consisiting of frame made out ofM.S.Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,fixing in the frame at the site as per specification & drawing. 91 S&F Plain framed panelled shutter (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated 35mm thick complete all as specified and as directed. 92 S&F locally fabricated glazed and skelton shutters 35mm thick open rebatedand prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a). 93 S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60x25mmsingle rebated comprises gauged skelton shutter ERW sec 50x20mm and 1mm thick with two open able leaf consisting two Nos sash bars of T section 20x3mm completed welded to frame with one vertical mullion of ERW box type T section of size 60x25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC 1:2:4 type B1 four Nos for each window incl following fittings weld to frame shutter (a) hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window (b) handle of Z sction 20x25mm, 100mm long 01 Nos per leaf (c) MS Tower bolt 150mm long of 12x3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100 long stoper-01 No per leaf () MS pintal of hinges of size 75mmx12mm-02 Nos per leaf (g) fabrication & fixing arrangement as per Drg No. CEJZ/TD-06-07 , Note : wire mesh and painting shall be measured and paid separately under appropriate item. 94 All as per description of item No 93.00 above but with glazed shutter. 95 S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 complete all as specified. 96 S&F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm completefixed with tinned tacks or galvanised wire staples all as specified and as directed. 97 S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed. 98 Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer. 99 Preparation of newsteel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paintcomplete all as specified. 100 S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. 101 M&L PVC 19/20mm cupboard shutter one side with decorativechoice lamination and other side balancingwhite lamination, fixed with screws to timberframed work including fixing arrangement complete all as specified. 102 S&F aluminum frame powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed. 103 S&Fany colour, aluminum door shutters powder coated, aluminium section weighing not less than 1.0Kg/ Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. 104 S&F anodised aluminium window and ventilator (wire gauged/ glazed) shutters, with powder coating of any colour (minimum thickness of powder coating 50 micron) side hung type/ sliding type without sash bars, aluminium sections weight not less than 1.20 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21, 100mm long (2 No.) suitable handle (1 No.) complete all as specified.Note:- Colour of powder coating shall be as directed by Engr-in-Charge. 105 S&F anodised aluminium grills (anodised transparent or dyed to required shade according to IS:1868 with anodic coating grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cuttung the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all as per requirement and direction of Engineer-in-Charge. 106 Supply & fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane complete all as specified and directed. 107 Supply & fix tinted glass ordinary quality 5.5mm thick n, exc 0.5 sqm in each pane complete all as specified and directed. 108 S&F 100mm butt hinges, stainless steel medium weightcold roled and fixed complete all as specified and directed. 109 S & F 150 mm aluminium handles, cast type anodised complete all as specified and directed. 110 S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed. 111 S&F aluminium anodised barrel tower bolt of extruded section of 200mm size complete all as specified and directed. 112 S&F 300 mm long aluminium alloy, anodized sliding door with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed. 113 S&F in replacement aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width andweight between 61 to 80 Kg complete all as specified as directed. 114 Dismantling Timber scantling 40 sqcm over in sectionin any descriptioncomplete all as spd. 115 M&L for Second class hard-wood timber framed and fixed in scantlings complete all as specified and directed. 116 S&F Rolled mild steel section as in joist, chanel, angle, or tee section fixed independently without connecting plates, etc (cut to ordinary length i,e within 20mm of the length indicated) of Fe-410w(Gde-E-250) quality A complete all as specified an directed. 117 S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesf Fe-410w(Gde-E-250) quality A complete all as specified an directed. 118 M&L for cement concrete 1:3:6 Type C-2 as in foundations filling and mass concrete all as specified and directed. 119 Demolition and breaking up drain pipes 100 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as spd. 120 S & F110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floors complete all as spd. 121 S & F 110 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed. 122 S & F75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallsor laid in floors complete all as specified and directed. 123 S & F 75 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed. 124 Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete all as specified and directed. 125 M & L PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement complete all as specified and directed.
