}

Tender For Rep Replacement Of Sanitary Fitting Tiles Granite And Other Connected Br Items In The Aor 190 Mtn Bde Under Ge 859 Ews, Tawang-Arunachal Pradesh

Military Engineer Services has published Tender For Rep Replacement Of Sanitary Fitting Tiles Granite And Other Connected Br Items In The Aor 190 Mtn Bde Under Ge 859 Ews. Submission Date for this Tender is 29-08-2025. Plumbing and Sanitary Work Tenders in Tawang Arunachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

50573074
Tender For Rep Replacement Of Sanitary Fitting Tiles Granite And Other Connected Br Items In The Aor 190 Mtn Bde Under Ge 859 Ews
Tender
Indian
Arunachal Pradesh
Tawang
29-08-2025

Tender Documents

Tender Details

Rep Replacement Of Sanitary Fitting Tiles Granite And Other Connected Br Items In The Aor 190 Mtn Bde Under Ge 859 Ews; 1 S&F in repair for 75 mm PVC (SWR) pipes single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floors, walls etccomplete all as specified and directed. 2 S&F for 75 mm PVC bends,branch piece or similar fitting as reqd to make the system functionalcomplete all as specified and directed. 3 S&F for PVC Floor trap 75 mmcomplete all as specified and directed. 4 S & F in repair for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed on wall complete all as specified and as directed. 5 S & F in repair for 110mm bore PVC (SWR) bends of any radius, complete all as specified. 6 S& F in repairs for Stop valves,chromium plated screwed down, high pressure, with capstan handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore complete . 7 S&F in repairs for Chromium plated brass Consealed type angle valve for 15mm bore pipe, fixed complete all as specified and directed. 8 S&F in repairs forfancy type bib taps, cast copper alloy withcapstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore. 9 S&F in repair for 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with (Minimum weight 15mm - 90gms), complete all as specified and directed. 10 S&F in repairs for 15mm dia stop valve standard of PTMT any colour, high pressure screwed for iron pipe with (Minimum weight 15mm-90gms), complete all as specified and directed. 11 S & F in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore. 12 S&F in repairs for Pillar taps standard of PTMT any colour, fancy type,high pressure screwed for iron pipe of 15mm bore(Minimum weight 110gms), fixed complete all as specified and directed. 13 S&F in repairs for Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15 mm bore (minimum weight 142 gms), complete all as specified and directed. 14 S&F in repairs for Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms), complete all as specified and directed. 15 S&Fin repairs for PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet ball valve , float and handle inlcuding brackets. 16 S&Fin repairs for vitreous china half stall urinal white complete includingfixing, bedded against wall in cement mortar 1:2 pointing around urinal back in cement fixed all as specified and directed. 17 S&f in repairs for Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including bracketsany size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc fixed complete all as specified and directed. 18 S & F in repairs for 5.50mm thick 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed complete all as specified and directed. 19 S & F in repairs for Vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe) including P or S trapfixed complete all as specified and directed. 20 S&F in repairs for Vitreous china wash down water closet pan, pedestal pattern, white, fixed in repairs complete including connecting to existing cistern including P or S trapfixed complete all as specified and directed. 21 S&F in repairs for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, fixed complete all as specified and directed by Engineer in Charge. 22 S&F in repairs for PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, fixed complete all as specified and directed. 23 S&F in repairs for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specified and directed. 24 S&F in repairs for PVC waste pipe 32mm dia, complete with 80 cm long flexible for WHB/Urinals fixed complete all as specified and directed. 25 S&F in repairs for Waste coupling of PTMT (half or full threaded) 32 mm bore (minimum weight 45 gms) fixed complete all as specified and directed. 26 S&F in repairs for Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type, ISI marked fixed complete all as specified and directed. 27 S & F for Rotational moulded polyethylene water storage tanks 500 litres capacity three layered white in colour ( clylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water tank. 28 S & F for Rotational moulded polyethylene water storage tanks 1000 litres capacity three layered white in colour ( clylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water tank. 29 Taking up or down 15/20 mm bore steel tubing and connection, including cleaning for refixing or removal to store complete all as specified and as directed. 30 S&F 20mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or laid in floor. 31 S&F 25mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or laid in floor. 32 Disconnecting existing tanks not exc500 ltr capacity setting a side or lowering if required and cleaning and removing all seal and dust it from mouth of circulating of pipe etc , the tank shall be cleaned and rinsed twice with 5%detergent solution and refixing tank at its original position complete as directed. 33 Disconnecting existing tanks exc500 ltr but n.exc 1000 ltr capacity setting a side or lowering if required and cleaning and removing all seal and dust it from mouth of circulating of pipe etc , the tank shall be cleaned and rinsed twice with 5%detergent solution and refixing tank at its original position complete as directed. 34 Disconnecting existing tanks exc1000 ltr but n.exc 2000 ltr capacity setting aside or lowering if required and cleaning and removing all seal and dust it from mouth of circulating of pipe etc , the tank shall be cleaned and rinsed twice with 5%detergent solution and refixing tank at its original position complete as directed. 35 S&F in repairgrating doom 125 mm dia with waste hole ofCPall as specified and as directed 36 S&Fin repairsflexible health faucet with clamp all as necessary fitting etc complete all as specified. 37 S&F in repairs CP Central hole Basin Mixer with copper pipe and all as necessary fitting etc complete all as specified. . 38 S&F in repairsWall Mixer telephonic type chromimum plated with CP wall flange and all as necessary fitting etc complete all as specified. . 39 S&F in repairs Over head shower Single flow self cleaning type with arm and all as necessary fitting etc complete all as specified. 40 S & F in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. 41 S&Fin repair of swivel shower of PTMT any coloured for fixing with 15mm pipe (Minimum weight 40 gms) 42 Fixing only in repair 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, complete all as directed. 43 S&F in repairs of PVC opening cover with hinges and locking arrangement for PVC water tank of capacity n.exc 500 Ltrs. 44 S&F in repairs of PVC opening cover with hinges and locking arrangement for PVC water tank of capacityn.exc 1000 Ltrs. 45 S&F for CPToilet paper holder including all fitting and fixturecomplete , 46 S&F for PVCbathroom cabinet Mirror 600x450mm including all necessary arrangement.Make - Prayag/Commander/Shakti. Cat Part No- B3510146 47 S & F in repair for sinks with drainage board made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 355 mm x 165 mm complete all as specified and directed. 48 S & F in repair of Vitreous china one piece EWC standard size white/ivory colour , wall hanging and floor mountedwith dual flushing cistern white including P or S trap ,fixed as complete all as specified and directed. 49 Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the debris outside the defence land complete all as specified and as directed. 50 M & L for PCC 1:4:8 type D-2(40 mm graded stone agg ) in foundation and mass concrete all as specified and directed. 51 M&L 75mm PCC type C2, 1:3:6 ( 40mm graded stone aggr) as in sub base of floor complete all as specified as directed. 52 M&L 25 mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in sub base finishing the surface even and rough to receive the topping layer. 53 Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing the debris outside the defence landall as specified and directed. 54 Materials and Labour forprecast cement concrete block masonry (1:3:6) type C1 using 20 mm graded stone aggtwith solid blocks, exc10 cmin width, set in cement morter (1:6) in wall complete all as specified and directed. 55 Providing precast cement concrete solid building blocks or slabs 10cm thick (with plainor interlocking joints as directed) setting in mortar,complete, in walls type B1 1:2:4 (20mm graded aggregate) 56 M & L for vitrified tiles light shade 8 to 10mm thick (square/rectangular) polished area of each tile 600mm x 600mm / 605mm x 605mm over andincluding15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. 57 M & L for Glazed coloured ceramic tiles External/Internal in vertical surfaces300mm x 450mmx7mm thick over & including10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. 58 M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence landcomplete all as specified and as directed. 59 M & L for 15mm thick Rendering on brick ,concrete surfaces in cement mortar 1:6 finishing even and smooth without using extra cement and similar likes at any height including necessary scaffolding including taking down cement plaster , raking out joints, hacking for key & scrubbing down with water and removing the debris outside the defence land complete all as specified & directed. 60 M & L for Rendering 10mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection,fascia,fins,parapet etc and similar likes at any height including necessary scaffolding, ladder, formork and including taking down cement / lime plaster of any description including raking out joints hacking for key scrubbing down with water etc and removing the debris outside the defence land complete all as specified and as directed. 61 M& L for prepaing new plastered surfaces of wall and applying two coats ofoil bound distemper over a coat of alkali resistant primer at any height including necessary scaffolding, ladder & formork etc complete all as specified and as directed. 62 M & L for Preparation of new plastered/concrete surfacesof walls and applying two coatsof cement base at any height including necessary scaffoldingetc complete all as specified and as directed. 63 M & L Machine cut kota stone slab flooring 18-20 mm thicklaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete allas specified and as directed.

Key Value

Document Fees
INR 500 /-
EMD
INR 90000.0 /-
Tender Value
INR 45 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail