Estimate For The Work Of Repairing Of Bituminous Road At Ring Road From Siksha Bhaban More On Santiniketan Road To Shyambati Bazar On Santiniketan Goalpara Road At Santiniketan Birbhum., Bolpur-West Bengal
TDR : 50570022
Tender Notice
BOQ
Expired
Bolpur
West Bengal
Estimate For The Work Of Repairing Of Bituminous Road At Ring Road From Siksha Bhaban More On Santiniketan Road To Shyambati Bazar On Santiniketan Goalpara Road At Santiniketan Birbhum.
Name of Work: Estimate for the work ofrepairing of Bituminous roadat Ring Road from Siksha Bhaban more on Santiniketan Road to Shyambati Bazar on Santiniketan Goalpara Road at Santiniketan Birbhum.
Sl. No.
Item Description
1
Tack Coat. Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) On bituminous surface (Using bitumen emulsion at the rate of 0.20 to 0.30 kg per sqm).
2
Bituminous Macadam using Hot Mix Plant (light duty) :-Providing and laying bituminous macadam with Hot Mix Plant using approved crushed aggregates of specified grading as per Table 500.7 premixed with bituminous binder, transported to site laid over a previously prepared surface at specified laying temperature with paver finisher to the required grade, level and alignment and rolled with suitable power roller for break down, inter-mediate and finished rolling as per specification to achieve the desired -compaction including cost and carriage of stone materials and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per Clause 504 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).For Grading II.(19 mm nominal size, 50-75 mm thick.) Using Drum mix Type light duty .
3
Road Marking with Hot Applied Thermoplastic Compoundwith Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per Clause 803 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(I- 8.09,page- 266)
4
Road Studs: Supplying & fixing of Raised Pavement Markers / Road Studs / Cats Eye made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face which shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and complying to clause no 804 of MoRT&H\"s specification for Road &Bridge Works (Fifth Rev.). Marker height shall not be less than 10 mm and shall not exceed 20 mm, width shall not exceed 130mm and with minimum reflective area of 13 sq.cm. on each side and slope to the base shall be 35 ± 5 degree. Fixing will be without nails but by using epoxy resin based adhesive as per manufacturer\"s recommendation including site clearance etc. and complete as directed by the Engineer in Charge .The contractor will have to provide a test certificate from a reputable national/international laboratory conforming the above specifications.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
