Tender For Construction Of Shop /Toilet At Jawahar Nagar In Front Shiv Ji Temple At Nagar Panchayat Bidhuna
Tender Value
25.19 Lakhs
Estimated cost
Bid Submission
13 Aug 2025
0 days left
EMD
50387
Bank guarantee accepted
Document Fee
2972
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bidhuna → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Shop /Toilet At Jawahar Nagar In Front Shiv Ji Temple At Nagar Panchayat Bidhuna
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil loam clay or sand including lift upto 1.5 m. (5fts) and lead upto 30 m. (100 fts)& including filling, watering and ramming of excavated earth into the trenches or into the space between the building & sides of foundation |
| 2 | Earthwork in embankment mechanially compacted upto 95% proctor density including cartage of earth upto 3.0 Km |
| 3 | Providing & Laying in Cement concrete 1:4:8 (1) cement :4 coarse sand :8 graded stone ballast with 40 mm. (nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work. And curing complete also including cost of formwork in foundation and floor. |
| 4 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Foundation/Column 4 excluding its fixing and binding wire and including neccesary centaring and shuttering Including supply of all material, labour, T&P etc. Required for proper completion of the work |
| 5 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in PLINTH /SLAB BEAM excluding its fixing and binding wire and including neccesary centaring and shuttering Including supply of all material, labour, T&P etc. Required for proper completion of the work |
| 6 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:2:4 in Slab excluding its fixing and binding wire and including neccesary centaring and shuttering Including supply of all material, labour, T&P etc. Required for proper completion of the work |
| 7 | Mild steel or iron Fe-500D or more in plain work such as reinforced concrete or 7 reinforced brick work as neccesary including bending for proper completion of the work and including supply of steel |
| 8 | Providing and laying Vitrified tiles in floor without lean concrete of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades. |
| 9 | Brick work with 1:4 cement and coarse sand mortor in Super structure (PWD Sch No. 305a+309) |
| 10 | 12mm thk plaster with 1:4 cement & coarse sand mortor. |
| 11 | Finishing walls with two coat of acrylic smooth exterior paints of best quality including supply of all materials, labours, T&P etc all complete. |
| 12 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare even and smooth complet. |
| 13 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. |
| 14 | Painting two coat over priming coat on steel and other metal surfaces up to 10 cm. width or sqmt in areas with superiour synthentic enamel such as Luxol-3 hi gloss apcolite dulex specified finishing to give an even shade all complete required for completion of the work |
| 15 | Supply and fixing of 32mm thick flush door commercial quality confirming to IS 2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles sprngs fitting with necessary screws complete. (SI No. 470a) |
| 16 | Providing and Fixing of Inaugration Stone/Board with details of work and Chairman/EO/Shabhasad/ Engineer name mention on Stone/Board complete with material, Labour,etc |
AI Tender Summary
Tender Timeline
Aug 07, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 13, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender