Annual Plan-Koratty GP,Pr. no. S0301/26.-Purchase and Installation of Generator to Crematorium.-General Electrical Work Purchase And Installation Of Generator Annual Plan-Koratty Gp, Pr. No. S0301/26.- Purchase And Installation Of Generator To Crematorium.-General Electrical Work , Electrical Work , Od183082/2025-2026: Supply , Conveyance And Unloading Of 25 Kva 415 V Threephase Dg Set With Company Made Acoustic Canopy Conforming To Cpcb Norms As Per Technical Details Given Below. Engine Make Prferredcummins/Volvo./Ojus Power,Leyland Model Of Dg-Ol25, Type Of Engine - Diesel Engine No. Of Cylinders - 3,In Line ,D Of Cooling - Water Cooled With Radiator Aspiration - Turbo Charged / Natural Design - Suitable For Generating Set Application Output - 33 Hp At 1500 Rpm Under Ntp Standard Accessories With Diesel Engine Fly Wheel To Suit Flexible Coupling Close Coupling Fuel Tank Capacity -60L, Coolant Capacity Approx - 11L,Governing Class - A Governing Used -Electronic, Fuel Filter Lubricating Oil Filter Residential Type Exhaust Silencer Engine Instrument Panel Starting Switch With Key Or Button Lubricating Oil Pressure Gauge Water Temperature Gauge Rpm Indicator With Hour Meter Supply Control For Engine Battery Control (Trip) Trip For Low Lubricating Oil Pressure Battery Control (Trip) Trip For High Water Temperature Providing Necessary Warning System And Other Safeties As Contemplated In Relevant Iss Fuel Pipes Oil Resistant Hoses Of 20 Mm Dia Or Nearest Ms Pipe As Per Manufactures Requirement For Fuel Lines Alternatormakestamfordor Eqivalent Make - Stamford/Leyrose Or Equivalent. Type Self Excited And Self Regulated Capacity 25 Kva / 20 Kw @ 0.8 P.F Lag System Voltage Three Phase 415 V Ac 50 Hz Speed 1500 Rpm Voltage Regulation Band 2.5% Of Rated Voltage Insulation Class F/H Alternator Should Confirm Is4722 The Dg Set Should Mount On A Suitable Size Base Frame With Anti Vibration Mounting Pad. Fuel Tank Capacity - 60L, 70 Ltr Capacity Fuel Tank Integrated With Acoustic Enclosure Complete With Fuel Provision For Filling The Diesel Electric Fuel Gauge. Battery Capacity -90Ah Required Number Of Suitable Rated Fully Charged Battery With Leads And Terminals As Required As Per Manufactures Requirements. Operation Manual Service Manual List Of Spares Etc. Shall Be Submitted While The Dg Set Is Supplied. Standard Control Panel Integral With The Acoustic Enclosure Comprising The Following 125 A 25 Ka 4 Pole Mcb Having Adjustable Setting Having Connection With Statutory Protective System Like Efr And Neutral Ct Etc. Digital Type Meter With Accuracy Class 0.5 To Read Parameters Such As Kwh, Wattage, Current, Frequency Etc. Led Type Phase Indication Type Fuse Protection Shall Be Provided For The Meters And Indication Lamps. Exhaust Piping Cost Of Dg Set With Charges Of Conveyance And Unloading At Site. , 14.12:Providing 15Mm Thick Cement Plaster Of Mix 1:4(1 Cement: 4 Fine Sand) At All Levels , 14.13.1:Providing, Laying And Fixing Following Dia G.I. Pipe (Medium Class) In Ground Complete With G.I. Fittings Including Trenching (75 Cm Deep)And Re-Filling Etc As Required50 Mm Dia , Od183081/2025-2026:Installation, Testing And Commissioning Of 25 Kva Dg Seton The Newly Constructed Concrete Basement After Initial Filling Of Oil And Fuel, Trial Run Etc. , Od183083/2025-2026:Supply And Clamping 80 Mm Dia Medium Class Gi Pipe With Clamps Made From 25X3mm Ms Flat (For Extension Of Exhaust Pipe) On Wall With Required Accessories Including Cutting And Making Good The Wall Painting The Exposed Portion Etc. As Required. , 5.4:Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required. , 5.9:Supplying And Laying 25 Mm X 5 Mm G.I Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection/ Terminating With G.I. Nut, Bolt, Spring, Washer Etc. As Required.(Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm) , 6.12:Providing And Fixing Testing Joint, Made Of 20 Mm X 3 Mm Thick G.I. Strip, 125 Mm Long, With 4 Nos. Of G.I. Bolts, Nuts, Chuck Nuts And Spring Washers Etc. Complete As Required. , 5.14:Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required. , 90.16.1.6:Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required6.00 Mm Copper Conductor (4 Swg) , 90.16.1.3:Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) , 90.16.1.1:Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required2.00 Mm Copper Conductor ( 14 Swg) , 90.16.5.6:Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required.6. Mm ( 4 Swg) , 90.16.5.3:Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required.3.15 Mm (10 Swg) , 90.16.5.1:Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required.2.00 Mm (14 Swg) , Od183088/2025-2026:Supply And Providing Thefollowingsizesof Bolt And Nut With Washers Onthe Existingm.S Box/ Earth Bus Etc. As Requiredincluding Drillingnecessary Holes As Required. 25X3mm Brass Nut And Bolt . , Od183085/2025-2026:Supply And Providing Thefollowingsizesof Bolt And Nut With Washers Onthe Existingm.S Box/ Earth Bus Etc. As Requiredincluding Drillingnecessary Holes As Required. 25X6mm Brass Nut And Bolt . , 90.14.1.1:Fabrication, Supply, Conveyance, Installation Testing And Commissioning Of Floor Or Wall Mounting, Dust And Vermin Proof, Cubicle Type Mv Panel Board Comprising Of The Following Components/ Devices & Complying To Is 8623. Fabrication Of Fully Partitioned, Dust And Vermin Proof Enclosure For Panel Assembly As Per Form 4 Of Is 8623 (With Latest Amendments) Using Crca Sheet As Per Approved Design And Requirement, With Front And Rear Access Facility, Bus Bar Chambers, Hinged Doors For All Switch Gear Compartments, Earthing The Doors Using 4 Sq Mm Braided Copper Conductor, Providing Necessary Cut-Outs For Mounting Meters, Relays, Indication Lamps, Bus Bar Interconnection Etc, Detachable Covers For Bus Bar Chamber And Cable Alley, Powder Coating The Assembly After Subjecting To 7 Tank Process Etc As Required. Crca Sheet Alone Be Used For The Fabrication. Angles/ Flats/ Slotted Angles Etc Shall Not Be Used For The Fabrication Of Panel Assembly. The Measurments Will Be Taken The Area Of The Complete Sheets Used For Panel Board Including Partitions, Folding, Shrouding Etc.Supply And Fabrication Of Mv Panel Board Using 2.00Mm Crca Sheet, Powder Coated (Excluding Base Frame) , 90.14.2.1:Supply And Providing 2Mm Smc Sheet As Shrouding For Bus Interconnection / Terminations Etc. Including Required Nut & Bolt Etc. , 90.14.3.2:Supply And Providing Heavy Duty A Section Neoprene Gasket In The Panel Boardu Section Rubber Beeding Suitable For 1.60/ 2.00 Mm Sheet , 90.14.4:Supply And Fabrication Conveyance And Installation Of Base Frame Of Panel Board Using 75 X 40 Mm Rolled Steel Channel (Ismc) , 90.14.5:Supply And Fabrication Conveyance And Installation Of Angle Iron Frame Work For Wall Mounting Panel Board , 90.14.6:Supply And Providing Copper Bus Bars Including Finger Type Smc Bus Bar Supports In The Bus Chamber, Suitable Size Nut & Bolt, Providng Heat Shrink Sleeves Etc. As Required. , 90.14.7:Supply And Providing Copper Earth Bus In The Panel Board , 90.14.10.4:Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Existing Panel Assembly As Required.16 A-100A, 25/35 Ka (Ics=100%Icu), 4 Pole, Current Limiting Type Mccb Having Thermal Setting Range Of 80 - 100% With Thermal Magnetic Release Having Adjustable Ol , 90.14.11.1:Mccb Accessoriessupply And Fixing One Number Earth Fault Relay Up To 100A With Cbct. , 90.14.11.12:Mccb Accessoriessupply And Fixing Shunt Release For All Voltage Range Up To 630A. , 90.14.11.14:Mccb Accessoriessupply And Fixing Rotary Handle, Direct Type (Including Buc Handle With Door Interlock ) In The Existing Mccb Of Rating Up To 250 A , 90.14.24.2:Supply & Fixingthe Following Power Capacitors 3 Phase Delta Connected In Positon And Giving Connection.2 Kvar, 3 Phase, 440 V, Delta Connected Standard Duty Metalised Poly Propylene Capacitor, Cylinderical Type, Suitable For Direct Connection To Motors. , 90.14.24.1:Supply & Fixingthe Following Power Capacitors 3 Phase Delta Connected In Positon And Giving Connection.1 Kvar, 3 Phase, 440 V, Delta Connected Metalised Poly Propylene Capacitor, Cylinderical Type, Suitable For Direct Connection To Motors. , 90.14.28.2:S & F Motor Starters Of The Following Ratingsthree Phase Dol Starters For 0.25Hp To 7.5 Hp Motor , 90.14.29.3:S & F Motor Starters Accessories Of Thefollowingpush Button Station For Starters , 2.1.1:Providing And Fixing Following Capacity Tp&N Disconnector Fuse Switch Unit Inside The Existing Panel Board With Isi Marked Hrc Fuses Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required.32 Amp Tp & N , 2.10.2:Supplying And Fixing 5A To 32 A Rating, 240/415 Volts, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole And Netural , 2.3.2:Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 8 Way, Double Door , 2.12.1:Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps , 2.14.1:Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral),240 Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Milli Amperes In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 25 Amps , Od183089/2025-2026:Supply And Providing Juntion Box -Sintex Make Gsjb 2525 / Equivalent On Surface / Recess ,Making Good The Damages, Colour Washing Etc. As Required. , 90.16.2.2:Supply And Laying Of The Following Sizes Of B Class Gipipe Laid 0.6 M Below Ground Level Including Excavating Trench Of Suitable Size And Refilling Etc, As Required.20 Mm Dia. G.I Pipe ( Medium Class) , Od183073/2025-2026:Supply And Fixing Up To 20A, 230/415 V, Bakelite Fuse Unit With Fuse Link. , Od183086/2025-2026:S&Fdanger Notice Board Of Size 100X75 Mm With Inception Both In English And Malayalam And Convention Skull And Bone In Red. , Od183084/2025-2026:S$F Led Indicators For All Voltage Ranges - Red, Green, Black, Yellow Or Orange Colour , Od183076/2025-2026:Supplying And Providing Earth Clamps For Siemens/ Tropodur Type Cable Glands Of Suitable And Other Dimensions Noted Along With Each Size Of Glands For The 25 Sqmm With 12Mm Wide X 1 Mm Thick Clip Of Cable As Required. , 90.12.5.27:Supply & Laying Of One Number Pvc Insulated And Pvc Sheathed Armoured Aluminium Power Cable Of 1.1Kv Grade Of The Following Sizes In The Existing Rcc/ Hume / Stone Ware/ Gi/ Dwc Pipe As Required.3.5 Core 25 Sq Mm , 90.12.7.1:Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armoured Aluminium Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages , Colour Washing Etc. As Required.2 Core 4 Sq Mm With Factory Made Clamp , 90.12.7.27:Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armoured Aluminium Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages , Colour Washing Etc. As Required.3.5 Core 25 Sq Mm With Factory Made Clamp , 90.12.7.40:Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armoured Aluminium Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages , Colour Washing Etc. As Required.4 Core 10 Sq Mm With Factory Made Clamp , 90.6.5.12:Supply And Drawing The Following Sizes Of Multi-Core Pvc Insulated & Frlspvc Sheathed 650/1100 V Grade Copper Conductor Round Flexible Cables Conforming To Is 694 Part I 1960 In The Existing Surface / Recess Conduit As Required Including Giving Necessary Connections Of The Following Sizes.3 Core 2.50 Sq Mm , 90.16.3.3:Supply And Clamping The Following Size Of Strips On Surface Of Wall/ Parapet/ Existing Cable Tray Using Clamps Fabricated From 20 X 3 Mm Gi Flat Duly Painted Or Heavy Duty Gi Spacer Saddles Spacing Of Clamps Not Exceeding 1 M, Making Good The Damages, Colour Washing Etc. As Required ( For Horizontal Run)25 X 6 Mm Gi Strip , Od183078/2025-2026:Supply And Installation Of 63 A, 415V, 50Hz Ac 23A4 Pole On Load Changeover Switch In Sheet Steel Enclosure Complete With Handle Assembly, Door Interlock And Pad Locking Arrangement On Existing Angle Iron Frame Work Or Directly To Wall Using Necessary Bolts And Nuts, Fixing The Unit To Wall Making Good The Damages Colour Washing Etc. Including Giving Necessary Connections As Required. , 9.1.20:Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required.3 1/2X25 Sq.Mm (28Mm) , 9.1.32:Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required.4 X 10 Sq. Mm (25Mm) , Od183079/2025-2026:Supply And Fixing 63 A Hrc Fuse Base With Hrc Fuse Link In The Existing Meter Board And Giving Connections Etc. , 1.17.11:Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required.2 X 2.5 Sq. Mm , Od183077/2025-2026:Supply And Providing 9L Capacitygi Fire Bucket In Post Office Red With Primer Coat Of Red Oxide And Written With White Paint Fire Mounted On Ms Angle Frame Work /Wall Bracket Filled With Fine Sand Painted The Bracket/ Floor Stand Including Making Good The Damagescolour Washing Etc. As Required As Per Is2546. , Od183075/2025-2026:Supply And Providing Led Phase Indication Lamps Ryb In Colour. , Od183080/2025-2026:Supply And Laying Bare Earthing Conductors Of 3.15 Mm Copper Conductor (10 Swg) Laid 0.6 Mtr Below Ground Level Including Excavating Trench Of Suitable Size And Refilling Etc. As Required ( In Ordinary Soil). , Od183087/2025-2026:Charges For Preparation Of Connected Drawings For Obtaining Approval From Electrical Inspectorate. , 90.12.10.3:Supply & Laying Of Dwc Pipe In Ordinary Soil 0.75M Below Ground Level Including Excavation63/50 Mm Or Nearest Size , 90.12.37.5:Supply & Laying Of One Number Pvc Insulated And Pvc Sheathed Armoured Copper Powercable Of 1.1Kv Grade Of The Following Sizes In Ground Including Excavation Of Trench Of Size 35 X 75 Cm, Refilling The Trench Etc. As Required But Excluding Sand Cushioning And Protective Covering (In Ordinary Soil).3 Core 4 Sq Mm , 90.15.3.4:Supply Installation Testing And Commissioning Of Octogaonal Pole Made Of Hot Dip Galvanised Gi Sheet 70 Mm Top Diameter, 130 Mm Bottom Diameter Thickness 3Mm Base Plate Dimensions Of 200X200x12 Mm Suitable For Wind Speed As Per Is 875 Part Iii Double Arm Bracket 0.5Mt Including Connector Foundation Bolt 4 Nos Fixed In Existing Rcc Foundation And Junction Box Etc. Complete 6 Meters , 90.15.4.3:Supply Conveyance, Installation, Testing And Commissioning Of 70W Led Street Light Output Greater Than 105Lumen/W 4000-6000 K With Ip 66 Protection Led Chip Make Cree/Lumilled/Nichea With Power Factor Greater Than 0.95 At Full Load, Internal Surge Protection Up To 8 Kv,And Aluminium Pressure Die-Cast Powder Coated Housing,Acrylic Cover Complete With Thd Less Than 10%, Power Factor Greater Than 0.98, Rohs Compliant, Duly Wired Up For Use On 230 V Ac Supply. Driver Compartment Should Be Seperatly Accessible For Maintenance (Lm 79&80 Certificates From Nabl Accredited Third Party Lab To Be Produced Mentioning Chip Manufacturer) , 14.1:Excavation For Foundation In Soft Soil Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 Metres. , 14.7:Providing And Laying In Position Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) In Foundation Of Pump, Dg Set Etc Including Form Work Etc As Required. , Od184217/2025-2026:Supply, Conveyance, Installingtesting And Commissioning 20W Flood Light With Die Cast Aluminium Housing , Od184218/2025-2026:Supply And Providing Tor Steel For Reinforced Cement Concrete Including Cutting Bending And Tying In Shape As Required. , Od184220/2025-2026:Supply And Providing 18 W, Led, Out Door Bulk Head Fittings On Wall/Ceiling And Giving Connections With Required Length Of 16/0.20 Mm Pvc Insulated And Pvc Sheathed 3 Core Round Copper Conductor Flex Wire Etc As Required. ( Luker Eco Lbkovsl18 Or Equivalent Make) , 90.2.1.1:Supply And Wiring Points According To Is 732-1989 Using Rigid Pvc Conduit Of Minimum Size 20 Mm With Specials Conforming To Is 9537 Part Iii 1983 And With Suitable Size Specials Conforming To Is 3419-1988, Fixing The Conduit Using Metal Saddles Spacing Not Exceeding 50 Cm Or Concealed Suitably And With 1.00 Sq Mm Frlspvc Insulated Stranded Single Core Copper Conductor Cable 650V Grade, Including Providingswitch Boardmain And Continuous Earthing With No.14 Swg Bare Copper,Required Quantity Of Copper Earth Socket, Brass Bolt And Nut Crimping/ Soldering Etc Complete With Suitable Size Modular Type Metal Switch Boxes, Modular Type Front Plates (White) Etc. Up To And Including 6A Modular Type Sp Switches And Making Good The Surface Of Wall, Colour Washing Etc. Complete. All The Terminations In The Switch Boards And Db'S Shall Be Tinned And The Wires Shall Be Drawn And Fixed Along The Periphery Of The Box Using Suitable Ties, Tie Mounts Etc As Required. (Rohs Compliant Modular Accessories).Single Control Light Point With 6A, Plate Ceiling Rose - Short Point , 90.2.1.3:Supply And Wiring Points According To Is 732-1989 Using Rigid Pvc Conduit Of Minimum Size 20 Mm With Specials Conforming To Is 9537 Part Iii 1983 And With Suitable Size Specials Conforming To Is 3419-1988, Fixing The Conduit Using Metal Saddles Spacing Not Exceeding 50 Cm Or Concealed Suitably And With 1.00 Sq Mm Frlspvc Insulated Stranded Single Core Copper Conductor Cable 650V Grade, Including Providingswitch Boardmain And Continuous Earthing With No.14 Swg Bare Copper,Required Quantity Of Copper Earth Socket, Brass Bolt And Nut Crimping/ Soldering Etc Complete With Suitable Size Modular Type Metal Switch Boxes, Modular Type Front Plates (White) Etc. Up To And Including 6A Modular Type Sp Switches And Making Good The Surface Of Wall, Colour Washing Etc. Complete. All The Terminations In The Switch Boards And Db'S Shall Be Tinned And The Wires Shall Be Drawn And Fixed Along The Periphery Of The Box Using Suitable Ties, Tie Mounts Etc As Required. (Rohs Compliant Modular Accessories).Single Control Light Point Without Ceiling Rose - Short Point , 90.2.1.4:Supply And Wiring Points According To Is 732-1989 Using Rigid Pvc Conduit Of Minimum Size 20 Mm With Specials Conforming To Is 9537 Part Iii 1983 And With Suitable Size Specials Conforming To Is 3419-1988, Fixing The Conduit Using Metal Saddles Spacing Not Exceeding 50 Cm Or Concealed Suitably And With 1.00 Sq Mm Frlspvc Insulated Stranded Single Core Copper Conductor Cable 650V Grade, Including Providingswitch Boardmain And Continuous Earthing With No.14 Swg Bare Copper,Required Quantity Of Copper Earth Socket, Brass Bolt And Nut Crimping/ Soldering Etc Complete With Suitable Size Modular Type Metal Switch Boxes, Modular Type Front Plates (White) Etc. Up To And Including 6A Modular Type Sp Switches And Making Good The Surface Of Wall, Colour Washing Etc. Complete. All The Terminations In The Switch Boards And Db'S Shall Be Tinned And The Wires Shall Be Drawn And Fixed Along The Periphery Of The Box Using Suitable Ties, Tie Mounts Etc As Required. (Rohs Compliant Modular Accessories).Single Control Ceiling Fan Point With 6 A, 3 Plate Ceiling Rose & With Socket Size Stepped Electronic Regulator. - Short Point , 90.2.1.6:Supply And Wiring Points According To Is 732-1989 Using Rigid Pvc Conduit Of Minimum Size 20 Mm With Specials Conforming To Is 9537 Part Iii 1983 And With Suitable Size Specials Conforming To Is 3419-1988, Fixing The Conduit Using Metal Saddles Spacing Not Exceeding 50 Cm Or Concealed Suitably And With 1.00 Sq Mm Frlspvc Insulated Stranded Single Core Copper Conductor Cable 650V Grade, Including Providingswitch Boardmain And Continuous Earthing With No.14 Swg Bare Copper,Required Quantity Of Copper Earth Socket, Brass Bolt And Nut Crimping/ Soldering Etc Complete With Suitable Size Modular Type Metal Switch Boxes, Modular Type Front Plates (White) Etc. Up To And Including 6A Modular Type Sp Switches And Making Good The Surface Of Wall, Colour Washing Etc. Complete. All The Terminations In The Switch Boards And Db'S Shall Be Tinned And The Wires Shall Be Drawn And Fixed Along The Periphery Of The Box Using Suitable Ties, Tie Mounts Etc As Required. (Rohs Compliant Modular Accessories).Combined Plug Point With 6 A, 5 Pin Plug Socket Controlled By 6 A, Switch In The Same Switch Board As That Of Light Points , 90.3.21.3:Supply & Installation Of Light Fittings On C/U Shaped Flat Iron Bracket Supply, Conveyance, Installation, Testing And Commissioning The Light Fittings Of Following Types Made From 0.5Mm Crca Sheet Complete With All Accessories Andlamps Etc. Directly On Wall Using 2 Nos. C/U Brackets Made From 20 X 3 Mm Ms Flat, Painting The Flat Iron Bracket And Giving Connections With Required Length Of 16/0.20Mm 3 Core Copper Conductor Flex Wire Conforming To Relevant Iss Or Extending The Original Wiring And Giving Connection Etc. As Required.1200 Mm 1X20w Led Lamp With Box Type Fixture , 90.4.5.4:Supply, Installation, Testing And Commissioning Of Ceiling Fan Of Following Sizes Including Wiring The Down Rods Of Standard Length (Up To 30 Cm) With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable Etc. As Required. 1200Mm Sweep - Ceiling Fan Complete With Service Value Minimum 4.0(Cub Meter/Minute/Watt), Air Delivery Minimum 210(Cubic Meter/Minute), Copper Winding Suitable For 230V/240V Single Phase Ac Supply , 90.4.8:Charges For Cutting Holes Suitable For Accommodating Exhaust Fans Up To 305Mm Sweep Including Plastering Colour Washing Etc. As Required. , 1.34:Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required. , Od184229/2025-2026:Supplying And Fixing 4Module Moulded Plastic Sintex Box In The Existing Wall Rigidlyand Connecting Cable /Wires Suitably , Od184230/2025-2026:Supply , Installation Of 250 Mm Sweep Light Duty Exhaust Fan In Plastic Body With Self Opening Lowers Working On 230 V Single Phase Ac In The Existing Opening, Fixing Necessary Anchor Bolts/ Bolt And Nuts Etc. As Required Including Giving Connections With The Supplied Wire Along With The Exhaust Fan. , Od184231/2025-2026:Supply And Providing The Following Types And Power Rated Lamps In The Existing Fittings As Required.Normal Size 5/7 W Led Lamp , 1.24.3:Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15/16 Amp Switch , 1.24.5:Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15/16 Amp Socket Outlet , 1.27.6:Supplying And Fixing Following Size/ Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.12 Module (200Mmx150mm) , 2.10.1:Supplying And Fixing 5A To 32 A Rating, 240/415 Volts, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole , 90.6.10.1:Supply And Fixing Of Following Sizes Of Light Gauge Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required20 Mm , 90.6.10.2:Supply And Fixing Of Following Sizes Of Light Gauge Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required25 Mm , 1.17.12:Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required.3 X 2.5 Sq. Mm , Od184265/2025-2026:Provision For Remitting Statutory Charges At Ele, Inspectorate.(On Production Of Original Recei,Is Permitted. ) , Od184266/2025-2026:Painting Letters Or Figures Of The Sizes 2.5 Cm, 4 Cm, 5Cm Height With Enamel Paint As Identification Mark To Sb, Db, Panel Board Etc. As Required , Od184267/2025-2026:Supply And Providing Multifunction Meter To Read V, A, F 3 Phase Accuracy Class One. , Od184268/2025-2026:Supply And Providing 2.00 Mm Thick 3.3 Kv Synthetic Elastromeric Fire Retardant Insulating Sheet. , Od184269/2025-2026:Supply And Installation Of Abc Powder Type (Stored Pressure) Fire Extinguisher 4Kg. Capacity Isi Mark Is: 15683 Consisting Of M.S Cylindrical Body, Squeeze Leve,R Discharge Valve Fitted With Pressure Indicating Gauge, 30Cm Long, High Pressure Discharge Hose, Nozzle Etc. With Map Powder For'A','B' & 'C' Class Fire, Fixing On Wall With Wallhook Etc As Required. , Od183074/2025-2026:Charge For Preparing Test Certificate And Completion Certificate For Kseb Connection.
