Tender For Repair/Painting/Recanning To Steel Furniture Under Ge Fort Kochi; 1 Almirah Large / Small/ Medium with shelves & 1/2 Hx1/2 shelvesM&L for cutting / removing the following corroded / unserviceable parts of Almirah small steel / Almirah large steel & replacing with new parts duly fixed complete all as specified, shown on drawing and as directed :- FD-1031/1032/1033/350/351 2 M&L for Brass chromium plated handle, 100 mm long, as per Godrej Pattern including taking down of old handle complete, all as specified and as directed. 3 M&L for One side leg of Almirah steel, left or right, 70 mm wide and 100 mm high, open ends bent outwards up to 15 mm, covering the ends of channel with 70 x 100 mm MS sheet, 1.6 mm thick, welding the channel to bottom of Almirah at 50 mm from the side of Almirah including 2 coats of synthetic enamel paint, colour of paint including taking down of old leg, complete all as specified and as directed. 4 M&L for 3 way locking device as per Godrej pattern, fully operational with the existing handle, all as specified and as directed. 5 M&L for steel cup board lock, 50 mm size, 6 lever with stainless steel keys in duplicate as per Godrej pattern, all as specified and as directed. 6 Locker Steel FD - 257/1029 M&L for cutting / removing the following corroded / unserviceable parts of Locker Steel & replacing with new parts duly fixed complete all as specified, shown on drawing and as directed :- 7 M&L for bow handle, chromium plated steel, 100 mm long fixed to each shutter including taking down of old handle complete, all as specified and as directed. 8 M&L for new Safety type hasp & staple, chromium plated steel of size 75x40x3mm including taking of old hasp & Staple complete, all as specified and as directed. 9 M&L for chromium plated steel tower bolt, 50 mm size welded to top or bottom of right shutter including taking down of old tower bolt complete, all as specified and as directed. 10 M&L for chromium plated steel conduit pipe, 20 mm dia, 1.6 mm thick, 380 mm long, fixed to existing pair of sockets on the upper portion of the left chamber including taking down of old conduct pipe complete, all as specified and as directed. 11 Chair Verandah FD – 256 M&L for cutting / removing the following corroded / unserviceable parts of Chair verandah & replacing with new parts duly fixed complete all as specified, shown on drawing and as directed :- 12 M&L for replacing worn out corroded frames at bottom of front of rear leg or handle portions with new 20 mm dia 16 G steel conduit of minimum length 150 mm, duly welded to the existing frame.Each leg at the bottom to be provided with hard rubber toes, chair verandah to be given 2 coats of synthetic enamel paint (white colour) over a coat of red oxide or zinc chromate primer complete to match with rest of the item, all as specified and as directed. 13 Table Office Clerk Steel Repairs to Table office clerk steel of the following :- 14 S&F table top with 18 mm thick pre laminated particle board (exterior grade) of size 1200 x 600 mm with teak veneer facing on one side and balancing white on the other side, including 4 mm thick teak wood edging all-round the table top and fixing the table top with top frame of table with screws from bottom including taking down of old table top complete, all as specified and as directed. 15 S&F lock for table drawer, MS lock, 4 lever, locking bolt and lever shall be brass with stainless steel duplicate keys, duly fixed to the top drawer and providing automatic locking system to other three drawers including taking down of old locks complete. Make Harrison, Link 16 S&F new 1 mm MS channel runner of 400 mm long folded to make shape duly welded one side to table frame to run the drawers smoothly including taking down old broken channel and make functional all drawers complete, all as specified and as directed. 17 Table Office Officer Steel FD-84(M)/1003 18 `-Ditto- all as per item No. 14 here-in-above, but table top of size 1370 x 760 x 18 mm thick for table office (Officer) Steel - FD 84 (M)/1003 19 `-Ditto- all as per item No. 15 here-in-above, but MS lock for table office (Officer) Steel - FD 84 (M)/1003 20 `-Ditto- all as per item No. 14 here-in-above, but table top of size 900x900x760mm (steel). FD-1009 21 `-Ditto- all as per item No. 14 here-in-above, but table top of size 900x600x760mm with / without drawer (steel).FD-1007/1008 22 GI CHARPOY WITH PLY TOP 23 Removing existing damaged/unserviceable plywood 12mm thick from GI Charpoy and supply and fix new 12mm thick plywood BWR grade of size 2100mmx900mm fixed with flat head nut, bolt of size 6mm dia 75mm long with 3mm thick washer (Total 08 Nos per charpoy) duly drilling hole in ply wood and steel frame of charpoy (2 Nos each to long rails and 02 Nos each to short rails) all as specified and shown on drawing or as specified and directed. Make Green Ply, Century & Kit Ply. 24 Removing existing unserviceable long rails from charpoy GI pipe and supply and fixing with new long rails of size 1890mm made out of GI tube 32mm dia medium grade including cutting / threading and fixing to GI charpoy to bring it to the existing shape and size, all as specified and shown on drawing or as directed. Make of GI tube-TATA/JINDAL/SURYA/ PRAKASH. 25 Removing existing unserviceable short rails from GI charpoy and fixing short rails of 810mm of GI tube 32mm dia medium grade (converted from retrieved long rails of GI charpoy) including necessary cutting, threading and fixing to GI charpoy as per existing shape and size, all as specified and shown on drawing or as directed. (Note: GI pipe retrieved from serial No 24 above shall be reused under this item) 26 Removing existing unserviceable legs from GI charpoy and fix new legs of size 392mm of GI tube 32mm dia medium grade (converted from retrieved short rails of GI charpoy) including necessary cutting, threading and fixing to GI charpoy as per existing shape and size, all as specified and shown on drawing or as directed. (Note: GI pipe retrieved from serial No 25 above shall be reused under this item) 27 Removing existing unserviceable elbow and supply and fix new three way GI elbow (ISI marked) suitable for 32mm bore GI pipe all as specified and shown on drawing or as directed. 28 Removing existing unserviceable check nuts from long rail and supply and fix new check nuts 6mm thick 32mm dia in its existing position , all as specified and shown on drawing or as directed. 29 Removing existing broken/damaged MS square tube 25mm 16 gauge as in stiffener and supply new MS square tube 25mm 16-gauge stiffener of 900mm long welded both sides at equal distance to long rail and painting two coats of synthetic enamel paint black colour over a coat of red oxide to the stiffeners, all as specified and directed by GE/Engr-in-charge. 30 TEAPOY VERANDAH 31 Removal of existing damaged top of Teapoy verandah and replacing the same with new top made out of 900 x 450 mm size, 18mm thick pre laminated particle board (White finish on top) with first class teak wood edging 3mm thick all sides duly fixed to the conduit frame with screws from below the conduit including French polishing TW edging complete all as shown in drg and as specified. FD - 255 32 CHAIR WRITING MAP 33 M&Lfor Seat cushion upholstered with fabric and moulded polyurethane foam with PVC lipping all roundsuitable forChair writing (Drg No FD/E6/MAP/12) including taking out old unserviceable seat cushion complete all as specified and directed. 34 M&L for Back cushion upholstered with fabric and moulded polyurethane foam with PVC lipping all roundsuitable forChair writing (Drg No FD/E6/MAP/12)including taking out old unserviceable back cushion complete all as specified and directed by Engineer-in-Charge. 35 M&L for Arm rest, Left/Right,made of black integral skin polyurethane with 75-85 shore A hardness and reinforced with MS insert, scratchand weather resistant, slope towards front, match with existing, suitable forChair writing (Drg No FD/E6/MAP/12)including taking out old unserviceable arm rest complete all as specified and directed. 36 BED HARD WITH PLY TOP MAP 37 M&L for 18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x185mm, screwed to MS strip, arc welded to 18mm size rectangular pipe as in head board of bed hard (Drg No FD/E6/MAP/08(R) including taking out old unserviceable head board complete all as specified and directed. Make : Kit ply, Green Ply, Century 38 M&L for 18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x310mm, screwed to MS strip, arc welded to 18mm size rectangular pipe as in foot board of bed hard (Drg No FD/E6/MAP/08(R) including taking out old unserviceable foot board complete all as specified and directed.Make : Kit ply, Green Ply, Century 39 M&L for 45x20x5mm size MS flat for fixing head/foot board, arc welded torectangular pipeofbed hard, (Drg No FD/MAP/08(R)) apply two coats of synthetic enamel paint colour black over a coat of red oxide primer to MS flat after welding including taking out old unserviceable MS strip of any size complete all as specified and directed. 40 M&L for 25x25x1.25mm thick MS square tube, 850mm long, as in stiffener of bed hard,welded to long rail (Drg No FD/E6/MAP/08(R)), apply two coats of synthetic enamel paint colour black over a coat of red oxide primer to MS pipe after weldingincluding taking out old unserviceable MS pipe of any size complete all as specified and directed. 41 M&L 12mmthick BWR grade plywood ISI markedas in bed hard (Drg No FD/E6/MAP/08(R)), placed on top of 25x25x1.25mm thick MS square tube stiffenerincluding taking out old unserviceable plywood complete all as specified and directed. 42 S&F rubber shoes suitable for 38x38mmMS square tube as leg of bed hard(Drg No FD/E6/MAP/08(R))complete all as specified and directed. 43 CHARPOY IP WITH HARD TOP 44 M&L for 12mmthick BWR grade plywood ISI markedas in charpoy hard top, screwed to 25x25x1.25mm thick MS square tube (Drg No FD/MAP/II/01)including taking out old unserviceable plywood complete all as specified and directed. 45 M&L for 25x25x1.50mm thick MS square tube, 850mm long, as in stiffener of charpoy with hard top,welded to long rail (Drg No FD/MAP/II/01)including taking out old unserviceable MS tube complete all as specified and directed. 46 M&L for 70x25x6mm thick MS plate, welded to frame of charpoy hard top to support ply top (Drg No FD/MAP/II/01) applying two coats of synthetic enamel paint colour black over a coat of red oxideincluding taking out old unserviceable MS flat complete all as specified and directed. 47 CHAIR SCHOOL WITH HAND BOARD 48 M&L 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in 585x300mm size writing board of chair school with hand board (Drg No FD/E6/MAP/05), including teak wood edging all-round, duly French polished, screwed to existing 25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame including taking out old unserviceable writing board complete all as specified and directed. Make Green Ply, Century & Kit Ply. 49 S&F PVC inner shoe suitable for 25mm dia MS pipe leg of chair school(Drg No FD/E6/MAP/05) complete all as specified and directed. 50 TABLE BEDSIDE 51 M&L 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as in side/front/back/drawer of table bedside with teak wood edging (Drg No FD/E6/MAP/15(R), including taking out old unserviceable board complete all as specified and directed. Make Green Ply, Century & Kit Ply. 52 S&F 50mm long,brass,chromium plated, handle suitable for table bed side including taking out old unserviceable handle complete all as specified. 53 RECANNING OF REPAIRED CHAIRS 54 M&L for canning chair verandah with new plastic cane of size 2mm/3mm/4mm cane including preparation of old treated steel surfaces of chair as per drawing No FD-256/19 and applying two coats of synthetic enamel white paint to the structure of chair verandah complete including taking out old/damaged plastic cane/newar from chair verandah and cleaning the entire surface complete all as specified and directed. Make: Siva Plastic, Shah Cane. 55 M&L for canning chair CBB steel with new plastic cane of size 2mm/3mm/4mm cane including preparation of old treated steel surfaces of chair as per drawing No FD-75(M) and applying two coats of synthetic enamel black paint complete including taking out old/damaged plastic cane with frame from chair CBB steel cleaning the entire surface complete and re-fixing the frame duly caned all as specified and directed. Make: Siva Plastic, Shah Cane 56 M&L for canning chair CBA steel with new plastic cane of size 2mm/3mm/4mm cane including preparation of old treated steel surfaces of chair as per drawing No FD-75 and applying two coats of synthetic enamel black paint complete including taking out old/damaged plastic cane with frame from chair CBA steel and cleaning the entire surface complete and re-fixing the frame duly caned all as specified and directed. Make: Siva Plastic, Shah Cane. 57 S&FCaster wheel of computer tablewith locking facilityfordifferent models of computer tableincluding taking out old damaged caster wheel complete all as specified and directed. 58 S&FRolling channel for key board tray of computer table Model KCT 028/KCT 003 /KCT 004 (Dumro)/Companion C2/Companion C10 (Godrej)including taking out old damaged rolling channel complete all as specified and directed. 59 M&L for good quality upholstery fabriccosting not less than INR 550 per running meter and moulded polyurethane foam designed with contour lumbar support for extra comfort with PVC lipping as in back of Chair revolvingModel PCH-7002 DGodrej including taking out old unserviceable upholstery fabric complete all as specified and directed. 60 M&L for good quality upholstery fabriccosting not less than INR 550 per running meter and moulded polyurethane foam designed with contour lumbar support for extra comfort with PVC lipping as in back of Chair revolvingModel PCH-7032Godrej including taking out old unserviceable upholstery fabric complete all as specified and directed. 61 M&L for good quality upholstery fabriccosting not less than INR 550 per running meter and moulded polyurethane foam designed with contour lumbar support for extra comfort with PVC lipping as in back of Chair visitorModel CH-1007Godrej including taking out old unserviceable upholstery fabric complete all as specified and directed. 62 M&L for good quality upholstery fabriccosting not less than INR 550 per running meter and moulded polyurethane foam designed with contour lumbar support for extra comfort with PVC lipping as in seat of Chair revolvingModel Monarch PCH-7002 DGodrej including taking out old unserviceable upholstery fabric complete all as specified and directed. 63 M&L for good quality upholstery fabriccosting not less than INR 550 per running meter and moulded polyurethane foam designed with contour lumbar support for extra comfort with PVC lipping as in seat of Chair revolvingModel PCH-7032Godrej including taking out old unserviceable upholstery fabric complete all as specified and directed. 64 M&L for good quality upholstery fabriccosting not less than INR 550 per running meter and moulded polyurethane foam designed with contour lumbar support for extra comfort with PVC lipping as in seat of Chair visitorModel CH-1007Godrej including taking out old unserviceable upholstery fabric complete all as specified and directed. 65 M&L for hydraulic gas lift,maintenance free,environmental friendly,chrome free cylinder tube shall be fixed in MS black powder coated outer central column tube 38mm dia and 2.0mm thick, 100mm stroke length, 300N force gas pressure suitable forChair revolvingvarious modelsincluding taking out old unserviceable gas lift complete all as specified and directed. 66 M&L for Pedestal assembly injection moulded in black 30% glass filled nylon 10.50mm dia, forged bright zinc plated MS castor pin of press fitted into each prong for holdingthe castors with 600mm pitch-centre diasuitable forChair revolving various modelsincluding taking out old unserviceable pedestalassembly complete all as specified and directed. 67 M&L for Left/Right handle suitable forChair revolvingModel PCH-7002 D Godrejincluding taking out old unserviceable handle complete all as specified and directed. 68 M&L for Left/Right handle suitable forChair revolvingModel PCH-7032Godrejincluding taking out old unserviceable handle complete all as specified and directed. 69 Painting of steel furniture: Scrapping down the faded off paint by any means and applying putty to obtain even surface, painting with one coat of synthetic enamel paint all as specified. Colour of the paint shall be as directed by Engr-in -charge 70 M&L for preparation of old treated steel surfaces of Almirah large with shelves as per drawing No FD-67(M) 1031/351 and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints. 71 M&L for preparation of old treated steel surfaces of Almirah medium with shelves as per drawing No FD-243/350/1032 and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . 72 M&L for preparation of old treated steel surfaces of Almirah large, half shelf and half hang, as per drawing No FD-1033 and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints. 73 M&L for preparation of old treated steel surfaces of Chair CBA as per drawing No FD-75(M) and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . 74 M&L for preparation of old treated steel surfaces of Chair CBB as per drawing No FD-75(M) and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . 75 M&L for preparation of old treated steel surfaces of Locker bed side as per drawing No FD-127(M)/1029 and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . 76 M&L for preparation of old treated steel surfaces of Rack adjustable as per drawing No FD-106(M) and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints. 77 M&L for preparation of old treated steel surfaces of Table office clerk as per drawingNo FD-84/1004 and applying a coat of synthetic enamel paint complete all as specified. 78 M&L for preparation of old treated steel surfaces of Stool, 305x305x510mm size, as per drawing NoFD 80/81(M) and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . 79 M&L for preparation of old treated steel surfaces of Table office officer as per drawing No FD-84/1002/03andapplying acoat of synthetic enamel paint complete all asspecified. 80 M&L for preparation of old treated steel surfaces of Table, 900x900x760mm size, as per drawing No FD-1009 and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . 81 M&L for preparation of old treated steel surfaces of Table with drawer, 900x600x760mm size, as per drawing No FD-1008 and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . 82 M&L for preparation of old treated steel surfaces of Book case as per drawing No FD-1028 and applying a coat of synthetic enamel paint complete all as specified and as directed. 83 M&L for preparation of old treated steel surfaces of Chair writing (MAP) and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . 84 M&L for preparation of old treated steel surfaces of Charpoy IP w/ hard top (MAP) and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . 85 M&L for preparation of old treated steel surfaces of Table Bed side steel (MAP) and applying a coat of synthetic enamel paint complete all as specified. Make: Asian Paint, Berger Paint, Nerolac Paints . 86 M&L for preparation of old treated steel surfaces of Teapoy Verandah as per drawing No FD-208/253 and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints. 87 M&L for preparation of old treated steel surfaces of Chair Verandah as per drawing No FD-256 and applying a coat of synthetic enamel white paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . 88 M&L for preparation of old treated steel surfaces of Bed Hard MAP as per drawing and applying a coat of synthetic enamel black paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . 89 M&L for preparation of old treated steel surfaces of Rack Shoe steel MAP as per drawing and applying a coat of synthetic enamel black paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints .
