Tender For Repair/Polishing/Rescanning To Wooden Furniture Under Ge Fort Kochi; 1 CHAIR DINING Material and Labour for removal of existing broken/unserviceable front leg of chair dining, replacing the same with new front leg, made out of 460 x 55 x 30mm 1st class hard wood (Teak) made to shape for chair dining and all exposed surfaces duly French polished and fitted as shown in drg including provision of a hard rubber ring screwed at the bottom of the new leg, all as specified and as directed.FD-279, 228 & 203 2 Material and Labour for removal of existing broken/unserviceable rear leg of chair dining, replacing the same with a new rear leg, made out of 890 x 55 x 30mm 1st class hard wood (Teak) made to shape with the existing leg and all exposed surfaces duly French polished and fitted as shown in drg including provision of a hard rubber ring screwed at the bottom of the new leg, all as specified and directed. FD-279, 228 & 203. 3 Material and Labour for removal of existing broken top back rest of chair dining and replacing the same with a new back rest made out of 405 x 45 x 35mm tapering to 405 x 45 x 15mm 1st class hard wood (Teak) made to shape by slightly concaving and all exposed surfaces duly French polished and fitted all as shown in drgs all as specified and directed. FD-279, 228 &2023. Note : Each back rest shall be measured as separate unit. 4 Material and Labour for removal of the existing broken front rail of the seat of chair dining and replacing the same with a new one made out of 440 x 30 x 65 mm in 1st class hard wood (Teak) made to shape, provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown in drg all as specified and directed. FD-279, 228 & 203. 5 Material and Labour for removal of existing broken back rail of the seat of chair dining and replacing the same with a new one made out of 405 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown in drg all as specified and directed. FD-279, 228 & 203. 6 Material and Labour for removal of existing broken, side rail of the seat frame of chair dining and replacing the same with a new one made out of 430 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown in drg all as specified and directed.FD-279, 228 & 203. 7 Material and Labour for removal of existing/broken bottom stiffener complete of chair dining and replacing the same with new stiffeners made out of 25 x 20 mm 1st class hard wood (Teak) having a length of 430 mm and all exposed surfaces duly French polished and fitted all as shown on drg all as specified and directed. FD-279, 228 & 203. 8 CHAIR WRITING: `-Ditto- all as per item No. 1 here-in-above but replacing front leg of chair writing with new leg made out of 685x55x30mm. FD-280,250 9 `-Ditto- all as per Item No.2 here-in-above but replacing the rear leg of chair writing with new leg made out of 890 x 30 x 55mm. FD-280,250 10 `-Ditto- all as per Item No. 3 here-in-above but replacing the back rest of chair writing with new back rest made to shape to 50 x 15mm out of 50 x 35mm. FD-280,250 11 Material and Labour for removal of existing broken/unserviceable any one arm rest of chair writing and replacing the same with a new arm rest made to shape out of 25mm thick, top width 60mm, tapering to the bottom having a width of 55mm, length 470 mm 1st class hard wood (Teak) including French polishing all exposed surfaces and fitted all as shown on drawing all as specified and directed. FD-280 & 250. 12 `-Ditto- all as per Item No.7 here-in-above but bottom stiffener of chair writing having a length of 470mm complete all as specified and as directed. FD-280,250 13 Material and Labour for removal of existing broken front/back/side rail of seat frame of chair writing and replacing the same with new one made out of 440 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown in drg all as specified and directed.FD-280/250. Note : Each rail shall be measured as separate unit. 14 CHAIR WOODEN BOTTOM W/O ARMS `-Ditto- all as per Item No.01 here-in-above but replacing front leg having a length of 435mm for chair wooden bottom without arms.FD-285 & 225 15 `-Ditto- all as per Item No.2 here-in-above but replacing rear leg having a length of 815 mm for chair wooden bottom without arms. FD-285 & 225 16 `-Ditto- all as per Item No.3 here-in-above but replacing back rest made to shape out of 405 x 50 x 35 mm for chair wooden bottom without arms. FD-285 & 225 17 `-Ditto- all as per Item No.4 here-in-above but replacing front rail made to shape out of 440 x 30 x 65 mm for chair wooden bottom without arms. FD-285 & 225 18 `-Ditto- all as per Sl Item No.5 here-in-above but replacing rear rail made to shape out of 400 x 30 x 65 mm for chair wooden bottom without arms. FD-285 & 225 19 `-Ditto- all as per Sl Item No.6 here-in-above but replacing side rail made to shape out of 435 x 30 x 65 mm for chair wooden bottom without arms. FD-285 & 225 20 `-Ditto- all as per Sl Item No.7 here-in-above but the length of stiffeners 430mm for chair wooden bottom without arms. FD-285 & 225 21 Material and Labour for removal of existing broken / unserviceable plywood seat of chair wooden bottom without arms and replacing the same with new OST plywood (Make-Kit ply/Century/Indian Plywood (Anchor) seat 6mm thick fixed to the side frames of the seat with steel screws @ 75mm C/C shown on drg all as specified and directed. FD-285 & 225 22 CHAIR EASY `-Ditto- all as per Sl Item No.1 here-in-above but replacing front leg of chair easy made to shape out of 545 x 55 x 25 mm all as shown on drg all as specified and directed.FD-229 & 201 23 `-Ditto- all as per Sl Item No. 2 here-in-above but replacing rear leg of chair easy made to shape out of 490 x 55 x 25 mm all as shown on drg all as specified and directed.FD-229 & 201 24 `-Ditto- all as per Sl Item No. 11 here-in-above but replacing arm rest of chair easy made to shape out of 610 x 65 x 25 mm all as shown on drg all as specified and directed. FD-229 & 201 25 `-Ditto- all as per Sl Item No.4 here-in-above but replacing front rail of chair easy seat frame made to shape out of 510 x 55 x 25 mm all as shown on drg all as specified and directed.FD-229 & 201 26 `-Ditto- all as per Sl Item No. 5 here-in-above but replacing rear rail of seat frame of chair easy made to shape out of 480 x 70 x 40 mm all as shown in drg all as specified and directed.FD-229 & 201 27 `-Ditto- all as per Sl Item No. 6 here-in-above but replacing side rail of seat frame of chair easy made to shape out of 575 x 70 x 40 mm all as shown on drg all as specified and directed. FD-229 & 201 28 Material and Labour for removal of existing top / bottom rail of back rest frame of chair easy replacing the same with new one made to shape out of 480 x 55 x 40mm1st class hard wood (Teak) provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown on drg all as specified and directed. FD-229 & 201. Note : Each rail shall be measured as separate unit. 29 Material and Labour for removal of broken unserviceable side rail of back frame of chair easy replacing with new one made to shape out of 440 x 70 x 25 mm 1st class hard wood (Teak) provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown on drg all as specified and directed. FD-229 & 201 30 Material and Labour for removal of the existing broken Stiffener rail of chair easy and replacing with new one, made to shape out of 510 x 50 x 25 mm 1st class hard wood (Teak) and all exposed surfaces duly French polished and fitted all as shown on drg all as specified and directed. FD-229 & 201 31 CHAIR EASY CUSHIONED `-Ditto- all as per Sl Item No.1 here-in-above but replacing front leg of chair easy cushioned made to shape out of 545 x 55 x 25 mm all as shown on drg all as specified and directed. 32 `-Ditto- all as per Sl Item No. 2 here-in-above but replacing rear leg of chair easy cushioned made to shape out of 490 x 55 x 25 mm all as shown on drg all as specified and directed. 33 `-Ditto- all as per Sl Item No. 11 here-in-above but replacing arm rest of chair easy cushioned made to shape out of 610 x 65 x 25 mm all as shown on drg all as specified and directed. 34 Material and Labour for removal of existing damaged cushion from the back and replacing with new back cushion 50mm thick (Make -Kurl-on) fixed over existing frame with 3mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) duly covered incl the frame/ cushion up to back with best quality leatherised Rexene of approved colour and fixed to the back of the chair easy with screws all as shown in drg all as specified and directed.FD-358 35 `-Ditto- all as per Sl Item No. 34 here-in-above but replacing the seat cushion of chair easy cushioned with new cushion (Make -Kurl-on), 75mm thick, all as shown in drg all as specified and directed.FD-358 36 Material and Labour for removal of existing damaged cushions fixed on any one of the arm rests of chair easy cushioned, replacing the same with new cushion (Make -Kurl-on) of 25 mm thick fixed on existing arm rest made to shape duly covered with leatherised Rexene and cushion base fixed to top of arm rest with screws all as shown in drg all as specified and directed.FD-358 37 CHAIR DINING LONG BACK Material and Labour for removal of existing broken/unserviceable front leg of chair dining cushioned long back & replacing the same with new front leg, made out of 450 x 50 x 25mm 1st class hard wood (Teak) made to shape for chair dining long back and all exposed surfaces duly French polished and fitted as shown in drg including provision of a hard rubber ring screwed at the bottom of the new leg, all as specified. FD-357 38 Material and Labour for removal of existing broken/unserviceable rear leg of chair dining long back & replacing the same with a new rear leg, made out of 1200 x 50 x 25mm 1st class hard wood (Teak) made to shape with the existing leg and all exposed surfaces duly French polished and fitted as shown in drg including provision of a hard rubber ring screwed at the bottom of the new leg, all as specified. FD-357 39 Material and Labour for removal of damaged cushioned back of chair dining with long back complete and replace with new cushioned back frame mounted on 10mm thick commercial plywood (Make-Kit ply/Century/ Indian Plywood (Anchor) base over 50mm thick 24 density synthetic foam rubber made to shape as shown in drg duly covered with leatherised Rexene and fixing the cushioned base to the back frame of the chair with screws all as shown on drg all as specified and as directed. FD-357 40 Material and Labour for removal of existing damaged cushioned seat frame of chair dining with long back complete and replace with new cushioned seat frame mounted on 10mm thick commercial plywood base (Make-Kit ply/Century/ Indian Plywood (Anchor) over which 50mm thick 24 density synthetic foam rubber duly covered with superior quality leatherised rexine and fixing the cushioned seat to the seat base/frame with screws all as shown in drg all as specified and directed.FD-357 41 Material and Labour for removal of existing damaged back cover of chair dining with long back complete and replace with new 10mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) base covered with superior quality leatherised rexine of existing colour and texture and fixing the back cover to the back base/frame with screws all as shown in drg all as specified and directed. FD-357 42 CHAIR PEDESTAL WRITING Material and Labour for removal ofexisting broken/unserviceable wooden writing hand rest of chair pedestal writing and replacing with new first class teak wood hand rest made to shape as shown on drg having middle length 750mm, 25mm thick the slightly curved base portion having 55mm width at the base increasing in width to 80 mm in the middle the expanded writing portion having a width 290mm and length 365 mm front portion being oval, all exposed surfaces duly French polished and fixed in position allas shown on drg all as specified and directed.DB-4124 43 Material and Labour for for removal of existing broken right front leg along with its top most support for the writing hand rest of chair pedestal writing and replacing with new one made to shape out of 685 x 55 x 55mm 1st class hard wood (Teak) and the top support should be 90mm long on the outside of the leg and 120mm in the inner portion 25mm thick, all exposed surfaces duly French polished and fixed to the top portion of the leg all as shown on drg all as specified and directed. DB-4124 44 Material and Labour for removal of existing broken left front leg of chair pedestal writing and replacing the same with new one made to shape out of 430 x 55 x 55mm 1st class hard wood (Teak), all exposed surfaces duly French polished and fixed all as shown on drg all as specified and directed.DB-4124 45 Material and Labour for removal of existing any one of hind leg of chair pedestal writing and replacing with new single hind leg made to shape out of 860 x 100 x 35mm 1st class hard wood (Teak), all exposed surfaces duly French polished and fixed all as shown on drg all as specified and directed. DB-4124 46 Material and Labour for removal of existing broken top back support of chair pedestal writing and replacing with new one made to shape out of 555 x 125 x 70 mm 1st class hard wood (Teak), all exposed surfaces duly French polished and fixed all as shown on drg all as specified and directed. DB-4124 47 Material and Labour for removal of existing broken middle back supporting stiffener of chair pedestal writing and replacing with new one made to shape out of 365 x 60 x 40 mm 1st class hard wood (Teak), all exposed surfaces French polished and fixed all as shown on drg all as specified and directed.DB-4124 48 HAT STAND Material and Labour for removal of existing damaged teak wood edging on all sides of Hat Stand & replacing the same with new 1st class hard wood (Teak) edging 6 mm thick 35 mm wide 1000 mm long and 710mm high on both sides, all exposed surfaces French polished and fixed with nails all as shown in drg all as specified and directed. and directed. FD-233 49 Material and Labour for removal of existing broken/foggy mirror of Hat Stand and replacing the same with new mirror (Make-Modi Guard/Prayag/ Trupti) not less than 5.0 mm thick and of size 300 x 400 mm and fixed complete all as shown in drg all as specified and directed. FD-233 50 Material and Labour for removing existing damaged plywood of Hat Stand and replacing the same on the front face with new 4mm thick one side teak veneered (OST)plywood (Make-Kit ply/Century/Indian Plywood (Anchor) except on the mirror portion and re-fixing the existing/ retrieved peg hooks and French polishing the teak veneered surfaces complete all as shown in drg all as specified and directed. FD-233 51 Material and Labour for fixing Hat stand on wall at site duly drilling holes with drilling machine and fixing with 45x8 mm MS screw over PVC plug all as specified and directed. 52 Material and Labour for removal of existing damaged peg hooks of Hat Stand and replacing each peg with new anodised aluminium peg hooks of 120mm long, 40mm base, fixed to the 4mm thick plywood (Make-Kit ply/Century/Indian Plywood (Anchor)face with a pair of screws all as shown in drg all as specified and directed. FD-233 53 PEG TABLE Material and Labour for removal of existing damaged top of peg table and replacing the same with new top 18mm thick prelaminated particle board 450 x 300 mm size (Novopan/Kitply/Greenply/Ecoboard/ Archidlam/Bhutan) with one side decorative teak finish including 18mm wide, 4 mm thick teak wood edging on all sides incl French polishing teak wood edging and as shown in drg all as specified and directed. FD-236 54 Material and Labour for removal of existing damaged any one leg of peg table and replacing the same with new leg 362 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces French polished and fixed all as shown in drg all as specified and directed. FD - 236 55 Material and Labour for removal of existing broken long rail of peg table and replacing the same with new rail 400 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces French polished and fixed all as shown in drg all as specified and directed. FD-236 56 Material and Labour for removal of existing broken short rail of peg table and replacing the same with new rail 250 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces French polished and fixed all as shown in drg all as specified and directed. FD-236 57 SIDE BOARD Material and Labour for removal of existing damaged any one of the side or middle shutters of side board and replacing the same with new single shutter made of 18 mm thick prelaminated particle board(Novopan/Kitply/Greenply/Ecoboard/Archidlam/Bhutan)(exterior grade) with one side decorative teak finish of size 318 x 600 mm including 18 x 4 mm size teak wood edging all round, shutter fixed with a pair of 75 mm size stainless steel butt hinges including re-fixing of retrieved builders hardware such as knobs, ball spring catches etc. and French polishing the teak wood edging, all as specified and as directed. 58 Material and Labour for removal of existing damaged top of the side board, replacing the same with new 18mm thick pre laminated particle board (Novopan/Kitply/Greenply/Ecoboard/ Archidlam/Bhutan) (exterior grade) 450 x 1500 mm size with one side decorative teak finish and fixed complete all as shown in drg all as specified and directed. FD-241 59 Material and Labour for removal of existing damaged teak wood back and replacing the same with new back made of 12mm thick commercial plywood (Kitply/Century ply/Indian Plywood (Anchor)) 635 x 1500 mm and fixed complete all as shown in drg all as specified and directed.FD-241 60 Material and Labour for supply Stainless Steel knobs, all as specified and directed. 61 TABLE DINING 8 PERSONS (1800x900x760 mm) Material and Labour for removal of existing damaged top of table dining 8 persons complete and replacing the same with new top made of 18mm thick prelaminated particle board (Novopan/Kitply/Greenply/Ecoboard/ Archidlam/Bhutan)(exterior grade) of teak facing one side of size 900 mm x 1800 mm with 4mm thick teak wood beading all round, French polishing on teak wood edging and fixed complete all as shown in drg all as specified and directed.FD-273 62 Material and Labour for removal of existing damaged legs of table dining and replacing with new leg made to shape out of 722x 75 x 40mm 1st class hard wood (Teak), provision of a hard rubber ring screwed at the bottom of the new leg and French polishing all exposed surfaces and fixed complete all as shown in drg all as specified and directed.FD-273 63 Material and Labour for removal of existing damaged long rail of table dining and replacing with new long rail made to shape out of 1740x 25 x 100mm 1st class hard wood (Teak), provision of a hard rubber ring screwed at the bottom of the new leg and French polishing all exposed surfaces and fixed complete all as shown in drg all as specified and directed.FD-273 64 Material and Labour forremoval of existing damaged short rail of table dining and replacing with new short rail made to shape out of840 x 25 x 100 mm1st class hard wood (Teak), provision of a hard rubber ring screwed at the bottom of the new leg and French polishing all exposed surfaces and fixed complete all as shownFD-273 all as specified and directed. 65 TABLE DINING 6 PERSONS (1500x900x760 mm) Material and Labour for removal of existing damaged top of table dining 6 persons complete and replacing the same with new top made of 18mm thick prelaminated particle board (Novopan/Kitply/Greenply/ Ecoboard/ Archidlam/Bhutan)(exterior grade) of teak facing one side of size 900 mm x 1500 mm with 4mm thick teak wood beading on all four sides, French polishing on teak wood edging and fixed complete all as shown in drg all as specified and directed. FD-273 66 Material and Labour for removal of existing damaged legs of table dining and replacing with new leg made to shape out of 722 x 75 x 40mm 1st class hard wood (Teak), provision of a hard rubber ring screwed at the bottom of the new leg and French polishing all exposed surfaces and fixed complete all as shown in drg all as specified and directed.FD-273 67 Material and Labour for removal of existing damaged long rail of table dining and replacing with new long rail made to shape out of 1440x 25 x 100mm 1st class hard wood (Teak), provision of a hard rubber ring screwed at the bottom of the new leg and French polishing all exposed surfaces and fixed complete all as shown in drg all as specified and directed.FD-273 68 Material and Labour for removal of existing damaged short rail of table dining and replacing with new short rail made to shape out of 840x 25 x 100mm 1st class hard wood (Teak), provision of a hard rubber ring screwed at the bottom of the new leg and French polishing all exposed surfaces and fixed complete all as shown in drg all as specified and directed.FD-273 69 TABLE DINING (1200 X 900X760 mm) `-Ditto- all as per Sl item No. 65 here-in-above but new top for table dining having size 1200 x 900 mm. FD-273 70 `-Ditto- all as per Sl item No. 66 here-in-above but new leg for table dining made out of 722 x 75 x 40 mm. FD-273 71 `-Ditto- all as per Sl item No. 67 here-in-above but new side rail for table dining having size 25x100x1140 mm. FD-273 72 TABLE WITHOUT DRAWER (900 X 600 X760 mm) `-Ditto- all as per Sl item No. 65 here-in-above but new top for table without drawer having size 900 x 600mm.FD-284 73 `-Ditto- all as per Sl item No. 66 here-in-above but new leg for table without drawer, made to shape out of 741 x 60 x 30 mm. FD-284 74 Removal of existing broken any one long rail of table without drawer and replacing the same with new rail made to shape out of 20 x 60 x 840 mm 1st class hard wood (Teak), French polishing all exposed surfaces and fixed all as shown on drg all as specified and directed. FD-284 75 `-Ditto- all as per Sl item No. 74 here-in-above but new short rail of size 20x60x540 mm for table 900 x 600 x760 mm without drawer. FD-284 76 TABLE CENTRE `-Ditto- all as per Sl item No. 65 here-in-above but new top of size 900 x 450 mm for table centre. FD-274 77 `-Ditto- all as per Sl item No. 66 here-in-above but new leg made to shape out of 400 x 60 x 30 mm for table centre. FD-274 78 `-Ditto- all as per Sl item No. 67 here-in-above but new long rail of size 20x50x840 mm for table centre (FD - 274) 79 `-Ditto- all as per Sl item No. 68 here-in-above but new short rail of size 20x50x440 mm for table centre (FD - 274) 80 TABLE BED SIDE `-Ditto- all as per Sl item No. 65 here-in-above but new table top of size 450 x 230 mm for table bed side.FD-276 81 Material and Labour for removal of existing damaged any one of the two sides of table bed side and replacing the same with new side using 18mm prelaminated particle board (Novopan/Kitply/Greenply/Ecoboard/ Archidlam/Bhutan) of size 230 x 510 mm with teak facing on one side and 4mm teak wood beading on the front edge including French polishing on wooden parts and fixed all as shown on drg all as specified and directed. FD-276 82 Material and Labour for removal of existing damaged back ply of table bed side and replacing the same with new 6 mm thick commercial ply (Make-Kit ply/Century/Indian Plywood (Anchor) of size 450 x 510 mm including French polishing on wooden parts and fixed all as shown on drg all as specified and directed. FD-276 83 TABLE WRITING `-Ditto- all as per Sl item No.65 here-in-above but new table top of size 1145 x 600 mm for table writing.FD-275 84 `-Ditto- all as per Sl item No. 66 here-in-above, but new leg made to shape of size 717 x 55 x 35 mm for table writing.FD-275 85 `-Ditto- all as per Sl item No. 67 here-in-above but new long rail of size 25x50x1085 mm for table centre (FD - 275) 86 `-Ditto- all as per Sl item No. 68 here-in-above but new short rail of size 50x25x540 mm for table centre (FD - 275) 87 Material and Labour for removal of existing damaged shutter of the table shelf of table writing and replacing with new shutter 18mm thick one side teak veneered particle board (Make-Kit ply/Century/Indian Plywood (Anchor) with 4mm thick teak wood beading on all 4 sides fixed to the side with Piano hinges of MS and the shutter provided with a recessed handle 50 x 38 mm and also cupboard lock with duplicate keys including French polishing teak veneered surface and TW beading and fixed complete all as shown in drg all as specified and directed. FD-275 88 Material and Labour for removal of existing damaged drawer of table writing complete and replacing with new drawer with 18 mm prelaminated particle board (Novopan/Kitply/Greenply/Ecoboard/ Archidlam/ Bhutan) and back plank base shall be 6mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) and the drawer to be provided with a new recessed type handle 50 x 38 mm embedded in the drawer face, exposed portion duly French polished all as shown in drg all as specified and directed. FD-275 89 TEAPOY `-Ditto- all as per Sl item No. 65 here-in-above, but new top of size 600 x 450 mm for Teapoy. FD-278 90 `-Ditto- all as per Sl item No. 66 here-in-above, but new leg made out of 30 x 60 x 497 mm for teapoy.FD-278 91 Material and Labour for removal of existing broken long rail of Teapoy and replacing with new long rail made to shape out of 510x 20 x 50 mm 1st class hard wood (Teak) including provision of a hard rubber ring screwed at the bottom of the new leg and French polishing all exposed surfaces and fixed complete all as shown in drg all as specified and directed.FD-278 92 `-Ditto- all as per Sl Item No.68 here-in-above but replacing short rail of teapoy made to shape out of 420 x 20 x 50 mm all as shown on drg all as specified and directed. FD-278 93 TABLE 3 X 2 WITH DRAWER `-Ditto- all as per Sl item No. 65 here-in-above, but new top of size 900x600 mm for table with drawer.FD-283 94 `-Ditto- all as per Sl item No. 66 here-in-above, but new leg for table with drawer made to shape out of 741 x 60 x 30 mm.FD-283 95 Removal of existing damaged/unserviceable drawer of table with drawer complete and replacing the same with new drawer with front made of 18 mm thick prelaminated particle borad 110 mm high and rear side with 12 mm thick particle board (Novopan/Kitply / Greenply/Ecoboard/ Archidlam/Bhutan) and base 6 mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor), all wooden exposed surface of drawer duly French polished all as shown on drg all as specified and directed. FD-283 96 TABLE DRESSING GENTS Material and Labour for removal of existing foggy/broken mirror of table dressing gents and replacing the same with new mirror (Make-Modi Guard/ Prayag/ Trupti) not less than 5.0 mm thick and of size 380 x 760 mm and fixing on the existing frame all as shown on drg all as specified and directed. FD -230 97 Material and Labour for fixing Table dressing Gents on wall at site duly drilling holes with drilling machine and fixing with 45x8 mm MS screw over PVC plug all as per direction of Engr in charge 98 TABLE DRESSING LADIES `-Ditto- all as per Sl item No. 96 here-in-above but mirror of size 366 x 1220 mm for table dressing ladies.FD-251/378 99 Material and Labour for removal of existing damaged aluminium double channel along with both of the broken sliding glass shutters of table dressing ladies and replacing with new aluminium double channels 12 x 22 mm and new sliding glass shutters not less than 5.0 mm thick all as shown on drg all as specified and directed. FD-251/378 100 Material and Labour for removal of existing damaged/unserviceable single drawer of the table dressing ladies and replacing with a new drawer with front made up of 12 mm thick prelaminated particle board (Novopan / Kitply / Greenply/Ecoboard/Archidlam/Bhutan)(exterior grade) with teak finish on one side with a 22 mm dia brass chromium plated knob fixed to the middle front, 12 mm thick commercial plywood(Make-Kit ply/Century/Indian Plywood (Anchor) for back & sides and drawer base with 6 mm thick commercial plywood(Make-Kit ply/Century/Indian Plywood (Anchor)all as shown in drg all as specified and directed.FD-251/378 101 Material and Labour for removal of existing damaged ply back of the mirror of table dressing ladies and replacing with new (Make-Modi Guard/ Prayag/ Trupti) 6mm thick 366 x 1220 mm size commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) all as shown in drg all as specified and directed.FD-251/378 102 STOOL DRESSING Material and Labour for removal of existing broken/unserviceable any one leg of stool dressing replacing the same with new leg, made out of 380 x 50 x 30mm 1st class hard wood (Teak) made to shape for stool dressing and all exposed surfaces duly French polished and fitted as shown in drg including provision of a hard rubber ring screwed at the bottom of the new leg, all as specified. FD-252 103 Material and Labour for removal of existing broken side rail of stool dressing and replacing the same with new rail 300 mm long x 25 x 50mm first class hard wood (Teak), and all exposed surfaces French polished and fixed all as shown in drg all as specified and directed. FD-252 104 Material and Labour for removal of existing broken front/rear rail of stool dressing and replacing the same with new rail 450 mm long x 25 x 65mm first class hard wood (Teak), and all exposed surfaces French polished and fixed all as shown in drg all as specified and directed. FD-252 105 Material and Labour for removal of existing cane beading on seat frame of stool dressing & replacing the same with new one made to shape out of 450 x 20 x 20mm1st class hard wood (Teak) provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown on drg all as specified and directed. FD-252 106 BOOK CASE Material and Labour for removal of existing damaged teak wood back and replacing the same with new back made of 6 mm thick commercial plywood(Make-Kit ply/Century/Indian Plywood (Anchor) 635 x 1500 mm and fixed complete all as shown in drg all as specified and directed.FD-237 107 Material and Labour for removal of existing damaged any one of the door shutters of book case and replacing the same with new single shutter made of 18 mm thick prelaminated particle board(Make-Kit ply/Century/ Indian Plywood (Anchor) (exterior grade) with one side decorative teak finish of size 318 x 600 mm including 18 x 4 mm size teak wood edging all round, shutter fixed with a pair of 75 mm size stainless steel butt hinges including re-fixing of retrieved builders hardware such as knobs, ball spring catches etc and French polishing the teak wood edging complete all as shown on drg all as specified and directed.FD-237 108 Material and Labour for for supply Stainless steel knobs as directed by EIC. 109 CHAIR DINING CUSHIONED Supply and Fix 450x65x25mm size Teak wood front/side rail of chair dinning officers, fixed to main frame and legs of chair dinning (Drg No FD/E6/MAP/10), apply two coats of French polish to new front/side rail to match with existing and apply a coat of French polish to other parts of chairincluding taking out broken/unserviceable front/side rail complete all as specified and directed. 110 Supply and Fix 450x50x35mm size Teak wood front legof chair dinning officers,fixed to main frame of chair dinning (Drg No FD/E6/MAP/10)), apply two coats of French polish to new leg to match with existing and apply a coat of French polish to other parts of chair including taking out broken/unserviceable front legcomplete all as specified and as directed. 111 Supply and Fix 75mm thick, 40 density foam seat (Make-Kurl-on), covered with fabric of approved colour suitable for chair dinning officers (Drg No FD/E6/MAP/10)), fixed to 12mm thick commercial plywood (Make-Kit ply/Century/Indian Plywood (Anchor) including taking out old unserviceable cushion seat complete all as specified and directed by Engineer-in-Charge. Note: The above all new exposed Teak wood surface of wooden furniture shall be applied with 02 coats of French polish after preparation of surfaces. Rate quoted for the above is deemed to be included for both 112 SOFA SET WITH CUSHIONSupply and Fix 560 x 530 x 100mm size foam cushion (Make-Kurl-on), seat/back, having 40 densities, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture suitable for sofa 4 & 5 seater as per drawing FD-281/373 complete all as specified and directed. Note: Seat and back will be measured as separate unit. 113 Supply and Fix 100mm thickfoam cushion seat (Make-Kurl-on),having 40 density, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture suitable for sofa single seater with cushion as per drawing No FD-258, including taking out old unserviceable/worn outseat cushioncomplete all as specified and directed. 114 Supply and Fix 100mm thickfoam cushion seat (Make-Kurl-on),having 40 density, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture, suitable for sofaset, three seater with cushions as per drawing No FD-258, including taking out old unserviceable/worn outseat cushioncomplete all as specified and directed. 115 Supply and Fix 50mm thickfoam cushion back (Make-Kurl-on),having 32 density, covered all sides with tapestry cloth costing not less than Rs420per meter of approved colour / shade / texture including 25mm thick cushion padding to get aesthetical shape and fixing four middle buttons to form middle curve to retain the aesthetical curved shape, suitable for Sofa chair single seateras per drawing No FD-258, fixed with suitable brass screw including taking out old unserviceable/worn outseat cushioncomplete all as specified and directed. 116 Supply and Fix 50mm thickfoam cushion back (Make-Kurl-on),having 32 density, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture including 25mm thick cushion padding to get aesthetical shape and fixing four middle buttons to form middle curve to retain the aesthetical curved shape, suitable for Sofa chair three seateras per drawing No FD-258, fixed with suitable brass screw including taking out old unserviceable/worn outseat cushioncomplete all as specified and directed. 117 Material and Labour for providing new tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture suitable for 560 x 530 x 100mm size foam cushion (Make-Kurl-on) seat/back, stitched three sides and provide best quality zip on one side for opening and closing suitable for sofa 4 & 5 seater as per drawing FD-281/373. including taking out old unserviceable/worn out cloth complete all as specified and directed. 118 CANNING FOR ALL TYPE WOODEN CHAIRS Material and Labour for canningchair dinning, chair writing, chair easy, chair pedestal, stool dressing, etc. with new plastic cane ofsize 1.8x0.46mm and boarderwith 3.0x0.60mm size cane (Make-Shiva plastic/Swastik/shah cane) as per Godrej Pattern after tightening the loose chair/stool duly French polishing the structures of chair/stool including taking out old/damaged plastic cane from the aforesaid furniture andcleaning the entire surface of furniturecomplete all as specified and directed by Engineer-in-Charge. 119 POLISHING FOR ALL WOODEN FURNITURE Material and Labour for preparation of old treated wooden surfaces ofBed hard ply Top as per drawing No-FD-246/247and applying two coats of French polish complete all as specified and as directed. 120 Material and Labour for preparation of old treated wooden surfaces ofChair writing as per drawing No-FD-20/280and applying two coats of French polish complete all as specified and as directed. 121 Material and Labour for preparation of old treated wooden surfaces ofChair Pedestal writing as per drawing No-DB-4124 and applying two coats of French polish complete all as specified and as directed. 122 Material and Labour for preparation of old treated wooden surfaces of Chair Dining with long back as per drawingNo-FD-357 and applying two coats of French polish complete all as specified and as directed. 123 Material and Labour for preparation of old treated wooden surfaces of Chair Easy Cushioned as per drawingNo-FD-358 and applying two coats of French polish complete all as specified and as directed. 124 Material and Labour for preparation of old treated wooden surfaces of Chair Easy as per drawing No- FD-17/229and applying two coats of French polish complete all as specified and as directed. 125 Material and Labour for preparation of old treated wooden surfaces of Chair Dining as per drawing No- FD-16/279and applying two coats of French polish complete all as specified and as directed. 126 Material and Labour for preparation of old treated wooden surfaces of Chair WBB as per drawing No- FD-56/285and applying two coats of French polish complete all as specified and as directed. 127 Material and Labour for preparation of old treated wooden surfaces of Chair Dining (MAP)and applying two coats of French polish complete all as specified and as directed. 128 Material and Labour for preparation of old treated wooden surfaces of Hat stand With Mirror as per drawingNo- FD-233and applying two coats of French polish complete all as specified and as directed. 129 Material and Labour for preparation of old treated wooden surfaces of Notice board, 1500x900mm size,as per drawing No- FD-99(M)and applying two coats of French polish complete all as specified and as directed. 130 Material and Labour for preparation of old treated wooden surfaces of Sofa4 seateras per drawing No-FD-281/373and applying two coats of French polish complete all as specified and as directed. 131 Material and Labour for preparation of old treated wooden surfaces of Sofa 3 seateras per drawing No- FD-258and applying two coats of French polish complete all as specified and as directed. 132 Material and Labour for preparation of old treated wooden surfaces of Sofa set 5 seater(one 3 seater and two single seaters)as per drawingNo FD-373/281and applying two coats of French polish complete all as specified and as directed. 133 Material and Labour for preparation of old treated wooden surfaces of Tablewithout drawer, 900x600mm size,as per drawing No- FD-42/284and applying two coats of French polish complete all as specified and as directed. 134 Material and Labour for preparation of old treated wooden surfaces of Table office officeras per drawing No- DB 4121and applying two coats of French polish complete all as specified and as directed. 135 Material and Labour for preparation of old treated wooden surfaces of Table Bed sideas per drawing No-FD-28/276and applying two coats of French polish complete all as specified and as directed. 136 Material and Labour for preparation of old treated wooden surfaces of Table office clerk as per drawing No-DB 4120and applying two coats of French polish complete all as specified and as directed. 137 Material and Labour for preparation of old treated wooden surfaces of Table Dining, 1200x900mm size, as per drawing No-FD 273and applying two coats of French polish complete all as specified and as directed. 138 Material and Labour for preparation of old treated wooden surfaces of Table, 900x900mm size, as per drawing No- FD 291and applying two coats of French polish complete all as specified and as directed. 139 Material and Labour for preparation of old treated wooden surfaces of Table writing, as per drawing No- FD-33/275and applying two coats of French polish complete all as specified and as directed. 140 Material and Labour for preparation of old treated wooden surfaces of Tablewith drawer, 900x600mm size,as per drawingNo- FD-41/283and applying two coats of French polish complete all as specified and as directed. 141 Material and Labour for preparation of old treated wooden surfaces of Table dressing Gents with mirror,as per drawingNo- FD-230/382/379and applying two coats of French polish complete all as specified and as directed. 142 Material and Labour for preparation of old treated wooden surfaces of Table Centre,as per drawing No- FD-214/274and applying two coats of French polish complete all as specified and as directed. 143 Material and Labour for preparation of old treated wooden surfaces of Teapoyas per drawing No- FD-278and applying two coats of French polish complete all as specified and as directed. 144 Material and Labour for preparation of old treated wooden surfaces of Table Pegas per drawing No- FD-25/277and applying two coats of French polish complete all as specified and as directed. 145 Material and Labour for preparation of old treated wooden surfaces of Table Dining for 8 personsas per drawingNo-FD-30/239/273and applying two coats of French polish complete all as specified and as directed. 146 Material and Labour for preparation of old treated wooden surfaces of Table Dining for 6 personsas per drawingNo-FD-30/239/273and applying two coats of French polish complete all as specified and as directed. 147 Material and Labour for preparation of old treated wooden surfaces of Side Board as per drawing No- FD-26/241 and applying two coats of French polish complete all as specified and as directed. 148 Material and Labour for preparation of old treated wooden surfaces of Table dressing Ladies with mirror, as per drawing No FD-251 and applying two coats of French polish complete all as specified and as directed.
