Tender For Renovation Of Library-Central Library,Digital Library And Common Toilet At Manit Bhopal
Tender Value
24.79 Lakhs
Estimated cost
Bid Submission
16 Aug 2025
0 days left
EMD
49589
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhopal → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation Of Library-Central Library,Digital Library And Common Toilet At Manit Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Item No 15.2.2 DSR 2023 |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 3 | Item No 15.60 DSR 2023 |
| 4 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 5 | Item No 4.1.10 DSR 2023 |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level |
| 7 | 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Item No 11.41.3 DSR 2023 |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 11 | 11.41.2 Size of Tile 600x600 mm |
| 12 | Item No 11.46 DSR 2023 |
| 13 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 14 | Non-DSR |
| 15 | Providing and fixing 12 mm thick frameless toughened glass panel of approved make in aluminium/steel framework for counter windows, including edge polishing, making holes/notches as required for Issuing Books-through slots or voice communication, providing and fixing glazing clips, EPDM gaskets, and all necessary fittings, complete in all respects as per the direction of Engineer-in-Charge. |
| 16 | Item No 2.6.1 DSR 2023 |
| 17 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineerin-charge |
| 18 | All kinds of soil |
| 19 | Item No 16.91 DSR 2023 |
| 20 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 21 | 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern |
| 22 | Item No 15.7.4DSR 2023 |
| 23 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 24 | 15.7.4 In cement mortar |
| 25 | Item No 15.12.1 DSR 2023 |
| 26 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.1 Of area 3 sq. metres and below |
| 27 | Item No 15.52 DSR 2023 |
| 28 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 29 | Item No 15.23.1 DSR 2023 |
| 30 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead |
| 31 | 15.23.1 For thickness of tiles 10 mm to 25 mm |
| 32 | Item No 6.2.1 DSR 2023 |
| 33 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in |
| 34 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 35 | Item No 13.1.1 DSR 2023 |
| 36 | CEMENT PLASTER (IN FINE SAND) 12 mm cement plaster of mix 13.1.1 1:4 (1 cement: 4 fine sand) |
| 37 | Item No 11.37 DSR 2023 |
| 38 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete |
| 39 | Item No 17.1.1 DSR 2023 |
| 40 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required |
| 41 | W.C. pan with ISI marked white solid plastic seat and lid |
| 42 | Item No 17.4.1 DSR 2023 |
| 43 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 44 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 45 | Item No 17.7.1 DSR 2023 |
| 46 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 47 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 48 | Item No 17.31 DSR 2023 |
| 49 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 50 | Item No 17.35.1.3 DSR 2023 |
| 51 | Providing and fixing soil, waste and vent pipes 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside |
| 52 | Item No 17.39.1.3 DSR 2023 |
| 53 | Providing and fixing plain bend of required degree. 17.39.1 100 mm dia 17.39.1.1 Sand cast iron S&S as per IS - 1729 |
| 54 | Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 55 | Item No 17.42.1.3 DSR 2023 |
| 56 | Providing and fixing double equal plain junction of required degree. 17.42.1 100x100x100x100 mm 17.42.1.1 Sand cast iron S&S as per IS - 1729 |
| 57 | Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 58 | Item No 17.57A.1.1 DSR 2023 |
| 59 | Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe 17.57A.1 100 mm dia 17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket |
| 60 | Item No 18.8.2 DSR 2023 |
| 61 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes |
| 62 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25 mm nominal dia Pipes |
| 63 | Item No 13.62.1 DSR 2023 |
| 64 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 65 | Item No 13.88 DSR 2023 |
| 66 | 13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratchesetc. complete |
| 67 | Item No 13.99.1 DSR 2023 |
| 68 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.99.1 One or more coats on old work |
| 69 | Item No 13.80 DSR 2023 |
| 70 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 71 | Item No 4.1.2 DSR 2023 |
| 72 | 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived fromnatural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 73 | Item No 10.16 DSR 2023 |
| 74 | 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 75 | 10.16.1 Hot finished welded type tubes |
| 76 | Item No 12.50 DSR 2023 |
| 77 | 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 78 | Item No 12.51 DSR 2023 |
| 79 | 12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :12.51.1 Ridges plain (500 - 600mm) |
| 80 | Item No 12.51 .6 DSR 2023 |
| 81 | 12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :12.51.6 Gutter (600 mm over all girth) |
| 82 | Item No 12.51 DSR 2023 |
| 83 | 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 84 | 13.61.1 Two or more coats on new work |
| 85 | NON DSR ITEM |
| 86 | Cleaning and Servicing of existing aluminum sliding window shutters and tracks including cleaning of glass panels, removing cobwebs, Lubricating sliding mechanisms for Smooth operation,and cleaning of extranal MS grill using Wire Brush, Detergent solution, and Emery paper to remove rust and dirt, complete as per direction of engineer-in-charge |
| 87 | Other Misc. Work as per DSR 2023 on % rate basis Rs. 85,000/- Only |
AI Tender Summary
Tender Timeline
Aug 06, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedAug 16, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 18, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender