Tender For Certain B/R And E/M Nature Works At Dgncc Camp Under Ge (East) Delhi Cantt-10; 1 M & L for preparation of old existing pathway/road/hardstanding areas duly brooming/scraping down to remove all loose dirt using mechanical broomer including removing the vegetable/glass over itfurther applying evenly one coat of road marking thinable paint (bituminous) of approved make, dark black colour (bituminous thinable paint mixed with water at the ratio of 1:20) as directed and approved by Engr-in-Charge complete all as specified and as directed. 2 M & L for preparation of black top surfaces of road by cleaning with air blower and applying 1.5mm thick road marking strips, dashes, arrows letters etc 10cm wide or more (retro-reflective) of white or golden yellow shade/colour using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and driven by experienced operator on road surface including cleaning all loose dirt, seals, oil greases and foreign materials etc complete all as directed. (Make : Asian Paints/APCO or equivalent). 3 Taking down chowkats or frames with shutters (without taking off shutters from the frames)exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed. 4 S&F Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed. 5 S & F for powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.6 mm x 44.45 mm x 2 mm in vertical and horizontal members and glazed with 5 mm thick tinted glass and 12 mm thick pre-laminated particle board interior grade with lamination on both faces as directed by engineer-in- charge according to site requirement including jointing clets, glazing pin, rubber packing and fixing accessories as per site requirement, complete all as specified and as directed. 6 S & F E-board ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm andspaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 2mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed. 7 S & F for curtain blinds fixing to window or doors of roller or any other patterns and colour as per requirement including necessary fixing material such as screw gitti etc, complete all as specified and directed. 8 Fabrication and fixing of modular wardrobe /cupboards made out of 18-20 mm thick HDHMR board with 2 mm thick fabric colour laminate sheet of approved quality and texture on all exposed side incl edges band including providing cabinets for keeping baskets/ drawers etc complete all as specified and directed. 9 S &F for 18-20mm thick WPC board with laminated fabric colour on both side, fixing in partition of modular kitchen cabinets and wardrobe/cupboard complete all specified and directed. 10 S & F for fancy type stainless steel bright polished handle oval type of size 150 mm complete all as specified and directed. 11 S&F 50 mm size cupboard lock of brass 2 levers including key set, complete all as specified and directed. 12 S&F for magnetic catches with Steel body H type fixed to shutter, complete all as specified and directed. 13 S&F for soft closing hinges of premium quality fixed indoor/cupboard shutters complete all as a specified and directed. (Make: IPSA/ Hettich/ Godrej) 14 Dismantling of plain or corrugated steel sheeting any guage, thickness including Nainital or similar pattern roof covering complete all as specified and as directed. 15 S&Fpre painted galavlume aluminium zinc coating GI based corrugated Steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall finished with self tapping screw complete all as specified and as directed. 16 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/ loose soil,complete all as specified and as directed. 17 Hardcore of broken bricks of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface,complete all as specified and as directed. 18 M&L for 75mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. 19 M & L for Coloured Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment over & including15mm thick screed bed in CM 1:6 etc. complete all as specified and as directed. 20 M & L for Brick work with sub class B bricks of old size, straight or curved on plan to any radius built in CM 1:6 including demolition of Brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified. 21 Taking down cement or cement lime plaster , any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. 22 M & L for 15mm thick rendering in CM 1:4 on fair face of brick walls/ concrete surfaces and finished even and fairincl scaffolding etc, complete all as specified and as directed. 23 M & L for 15mm thick rendering in CM 1:6 on fair face of brick walls/ concrete surfaces & finished even and fair incl scaffolding etc, complete all as specified. 24 M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and fairincl scaffolding etc, complete all as specified and as directed. 25 M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. Make: BERGER (WEATHER COAT LONG LIFE 10), ASIAN PAINTS (APEX ULTIMA), NEROLAC (EXCEL MICA MARBLE) 26 M & L for Preparation of newly plastered /unplastered surfaces of walls and ceilings andapplyingTwo coats of Oil Bound Distemper on wall surfaces over a coat of interior primer ,complete all as specified anddirected. 27 S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvres and jallies,50 mm thick ( design and pattern as approved by GE) set in CM (1:4)including all mouldings but excluding frame fixed over boundary wall or walk ways or in any position etc complete all as specified and directed. 28 S & Fprecast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed. 29 Taking down chowkhat or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed. 30 Taking down shutters of any descriptionnot exceeding 2.00 Sqm each complete all specified and directed. 31 S & F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. 32 S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed. 33 S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube,complete all as specified and as directed. 34 S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern) with wood free EPS in frame at site as per specification & drawing complete all as specified and as directed. 35 S&F Aluminium alloy powder coatedstandard hollow section for ventilators as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of5.5mm thick tinted glass ofsuperior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed. 36 S & F 100mm size stainless steel butt hinges fixing with screws to door frame of any type, complete all as specified. 37 S & F 100mm size stainless steel butt hinges fixing with screws to door frame any type complete all as specified. 38 S & F aluminium anodised 150mm size barrel tower bolt complete all as specified and as directed. 39 S & F aluminium anodised 150mm size barrel tower bolt complete all as specified and as directed. 40 S & F 150mm size aluminium anodised handles complete all as specified and as directed. 41 S & F 150mm size aluminium anodised handles complete all as specified and as directed. 42 S & F 100mm size Mild steelbutt hinges cold rolled, medium weight welded to Iron door / fixed to frame complete all as specified. 43 S & F 150mm size Mild steel, semi-barrel tower bolt, open cover, with sheet pressed barrel, stove enamelled black with bright bolt complete all as specified and as directed. 44 S & F 150mm size Mild steel handles complete all as specified and as directed. 45 S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. 46 S & F for mild steel pressed oval typehandles stove enamelled black for doors 150 mm long complete all as specified and directed. 47 S & F for 150mm long mild steel barrel tower bolts stove enamelled black, with bright bolt complete all as specified and as directed. 48 S & F 250 mm long aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. 49 S & F in repair Aluminium ( Die cast ) body door closer hydraulically regulated designation No. 2 universal type suitable for door shutters of 701 to 850mm in width andofweight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed. 50 S & F in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed to doors and widows with necessary 12mm ironflats with welding and including dismantling of old wire cloth complete all as specified and directed. (Note :- Rates are inclusive ofwelding and supply of flats including reqd nut bolts wherever required) 51 S & F in repair stainless mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed to doors and widows with necessary wooden beed including dismantling of old wire cloth complete all as specified and directed. 52 S & F 3mm thick sheet glass, ordinary quality and glazingwith wooden beading not exc 0.5 Sqm in each pane all as specified and directed including hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed 53 S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) S Trap withconnection to drain and to flushing pipe anti-syphonage pipe,and making good to floor complete all as specified and directed. 54 S & F in repair Vitreous China squatting pan Orissa pattern size 580 x 440 mm white, with integral foot rests, P or S trap and connection to trap and to flushing pipe anti-syphonage pipe including provision of cement concrete and making good to floor complete all as specified and directed. 55 S&F in repair 10 Ltrs capacity PVC valve less symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed 56 S&F in repairs 15mm PTMT Pillar taps any colour high pressure screwed for iron pipe (Minimum weight 15mm-90gms) complete all as specified and directed. 57 S&F in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specified and directed. (Make: Jaquar/ Marc/ Kohler) 58 S & F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms), complete all as specified and as directed. (Make: Prayag/ Prince/ Polytuf) 59 S & F in repairs angle cock of PTMT any colour high pressure screwed for iron pipe 15mm bore and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed. (Make : Prayag/Prince/polytuff) 60 S & F in repairs CP Angle cock (Two-in- one) any colour high pressure screwed for iron pipe 15mm bore and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed. (Make: Jaquar/ Marc/ Kohler) 61 S & F in repair 32mm spring type PVC waste pipe fixed to WHB and sink (Note minimum length of each pipe should not be less than 0.80RM), complete all as specified and as directed. 62 All as per item No 61 here-in-before but of size 40mm , complete all as specified and as directed. 63 S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. 64 S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.(Make: Jaquar/Marc/Kohler) 65 S & F in repair 15mm bore angle valve of CP brasshigh pressure screwed for iron pipe and fixed complete all as specified and as directed. (Make: Jaquar/Marc/Kohler) 66 S & F in repair Brass CP basin mixercentral hole, for mixing hot and cold water fixed as per manufactures manual, with long shank and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM / Jaquar-Cat No. KUP-35005BPM / Kohler-Cat No. K-74013IN-4BND-CP/Kohler-Cat No. K-74026IN-4BND-CP. 67 S & F in repair Brass CP sink mixer central hole, for mixing hot and cold water fixed as per manufacturers manual, with long shank and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete. 68 S & F in repair Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower andsuitable for 15mm bore GI pipe includingthree joints to steel pipes or unions and plugging andscrewing to walls, fixed in repairs, completeall as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP. 69 S&F in repairs 75mm dia brass PTMT shower rose with neck and swivel joints fancy type including shower arm 195mm long, suitable for 15mm bore GI pipe all asspecified and directed. (Make: Prince/ Polytuf/ Prayag). 70 S&F in repairs 125mm dia brass chromium plated shower rose with neck and swivel joints fancy type suitable for 15mm bore GI pipe all asspecified and directed. (Make: Jaquar/Marc/Kohler) 71 S & F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 72 S & F in repairs 5mm thick bevelled edge mirror of size exc 0.5 Sqm but not exc 0.70 Sqm, of selected quality, mounted on wall with chromium plated brass studs/nut and cup washers complete all as specified and as directed. 73 S & F in repairs glass corner shelfconsisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. (Make: Jaquar/Marc/Kohler) 74 S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. 75 S & F Rotational moulded polyethylene water storage tanks 2000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. 76 S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel headscrewed for iron pipecomplete all as specified and directed. 77 S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel headscrewed for iron pipecomplete all as specified and directed. 78 S & F in repair Stainless steel Gratingdome100/ 125mm dia with or without hole for waste pipecomplete all as specified and as directed. 79 S&F in repairs of CPtowel rail D Type 600mm longfixed with and including chromium plated brass screws andwooden/plastic cleats, complete all as specified. (Make: Jaquar/ Marc/ Kohler) 80 S & F in repairsChromium plated towel ring including all fittings for fixing complete all as specified and directed. (Make: Jaquar/Marc/Kohler) 81 S & F in repair flushing cistern kit (internal kit) of any type complete all as specified and directed 82 S & F in repair flushing cistern handle complete all as specified and directed 83 S & F in repairs Towel rack of size 600mm x 350mm cast copper alloy chromium plated all as specified and directed. (Make: Jaquar/Marc/Kohler) 84 S&F in repairsCP Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hookcompleted all as specifiedMake : JaquarCat part No. ALD-CHR-573 / Jaquar cat part No HSH CHR 1657 or equivalent in Marc / Kohler as approved by GE) 85 S & F in repair chromium plated jet spray suitablefor fixing to 15mm dia GI pipe with 1.00 mtr long pipe, complete all as specified and directed . Make :- Kohler / jaguar /Marc 86 S & F in repairs internal fittings of brass, suitable for chromium plated wall mixer of any type all as specified and directed. (Make: Jaquar/Marc/Kohler) 87 S & F in repairs plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed 88 S & Fin repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.(MAKE : JAQUAR/MARC/KOHLER). 89 S & Fin repairschromium plated soap Dish, complete all as specified and directed. (MAKE : JAQUAR/MARC/KOHLER). 90 S & F in repairs Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified. 91 S & F in repairs Urinal spreader of CP brass suitable for fixing with 15mm dia pipe complete all as specified. 92 S & F in repair vitreouschina wash basins , flat back size 550x400 mm white excluding taps, waste couplingand pipebut including brackets all asspecified and directed. 93 S & F Vitreous china wash basin counter ovaltype size 600x425x195mm,fixed in repairs, undergranite slab with all fitting and fixture,fixed in repairs, complete all as specified and as directed. 94 S&F inrepairs 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all asspecified anddirected. 95 S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. 96 S & F in repair 15mm galvanised iron medium gradefittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed. 97 S & F in repair 20mm galvanised iron medium gradefittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed. 98 S & Ftubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed. 99 All as item No 98 here-in-before but 20mm, complete all as specified and directed. 100 S & F in repairs Vitreous china single Piece floor mounted WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm including connection to drain pipewith all fitting and fixturecomplete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. SLS-WHT-6851S300PP or equivalent in Marc / Kohler ) 101 S & F in repair flushing cistern internal kit suitable for single piece EWC of any type/ any model/ any make, complete all as specified and directed 102 S & F in repairgalvanised, ISI marked tank nipple suitable for 15mm bore pipe, complete all as specified and directed 103 S & F in repairgalvanised, ISI marked tank nipple suitable for 20mm bore pipe, complete all as specified and directed 104 S & F 20mm outer dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fittings ISI marked on walls/ceiling or laying in floorsincluding taking up or down GI tubing 20mm bore and connections complete all as specified and directed. 105 S & F in repair 20mm CPVCfittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed. 106 S & F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms complete all as specified and directed. 107 S & F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms complete all as specified and directed. 108 S & F in repairs PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed in walls complete all as specified & directed. 109 S & F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed in walls complete all as specified & directed. 110 S & F in repairs PVC (SWR) 110mm bore junction double, (double T), equal or unequal with access door, complete all as specified and directed. 111 S & F in repairs PVC (SWR) 110mm bore junction double, (single T), equal or unequal with access door, complete all as specified and directed. 112 S & F in repairs PVC (SWR) 110mm bore bends with access door, complete all as specified and directed. 113 S & F in repairs PVC (SWR) 75mm bore bends with access door, complete all as specified and directed. 114 S & F in repairs PVC (SWR) 75mm bore junction Single T), equal or unequal with access door, complete all as specified and directed. 115 S & F in repairs PVC (SWR) 75mm bore junction Double T), equal or unequal with access door, complete all as specified and directed. 116 S&F S & F in repairs stack clamps out of 50mm x 5mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 110mm bore of pipe, complete all as specified. 117 S&F S & F in repairs stack clamps out of 50mm by 5mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified. 118 Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specifiedand directed. 119 Dismantling of Cast Iron pipe 75 mm bore complete all as specifiedand directed. 120 Dismantling of Cast Iron pipe 100 mm bore complete all as specifiedand directed. 121 Demolition of stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specifiedand directed. 122 M&L for cutting chases on brick or concrete surface for concealed water tubing or girth n.exc 10cm including making good of disturbed surfaces with PCC 1:2:4 type B0 using 12.5 mm graded aggregate complete all as specified and directed. 123 S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. 124 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Make Rajshree or equivalent 125 Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including 3 Nos stainless steel butt hinges of size 100mm, 2 Nos150mm long stainless steel tower bolt and 01 No 250mm long sliding bolt ofall as per direction of Engineer-In-Charge. Make Rajshree or equivalent 126 S&F Aluminium alloy powder coatedstandard hollow section for ventilators as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of5.5mm thick tinted glass ofsuperior quality including handles, tower bolt, 2 hinges and all standard fittings complete all as specified and as directed. 127 M&L for mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. 128 All as per item No 127 here-in-before but8mm dia as in stirrups. 129 M&L for providing reinforced cement concrete(1:2:4) type B-1 using 20 mm graded crushedstone aggregate as in Beams, cantilevers, bressummers, lintels all as specified and directed. 130 Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening. 131 Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide,complete all as specifiedand directed. 132 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specifiedand directed. 133 M&L for RCC (1:2:4) Ty B-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like,complete all as specifiedand directed. 134 M&L for RCC (1:2:4) Ty B-1 using 20mm graded stone aggregate as chajjas,complete all as specifiedand directed. 135 Supply only liquid water proofing compound complete all as specified and directed. 136 Material & labour for complete removal of existing membrance and for cleaning of concrete or plasteredsurfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followedevenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thickAPP modified polymeric waterproofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weightnot less than160GmperSqm)unrolled& bondedtosubstratewithsideandendlaps75mm & 100mm asper manufacturer’s instructions and finished the top of polymericwater proofing membrane with a coat ofaluminiumpaint@ 0.15ltr per Sqm completeallas specified & directed.Notes:(1) The work shall be executed through authorised applicator of manufacturer only.(2) Authrised Applicator shall be approved by GE before starting of work.(3) All materials shall be procured directly form manufacturer.Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a periodof Eight yearsin favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.(e) Full quantity of water proofing chemical / paint shall be entered in MB as NOT TO BE ABSTRACTED. 137 M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size 300mmx300mm or 400mmx400mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed. 138 M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed. 139 S & F in repairs ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :-(a) Wash Hand Basin 810mm x 500mm with CP grating and CP bottle trap.(b) Base Cabinet 780mm x 485mm x 460mm.(c) Side Cabinet 300mm x 250mm x 1800mm.(d) Mirror cabinet size 780mm x 160mm x 800mm.Make : Hindware - Cat Part No. 70089 or 70084.Make : Kohler : Cat Part No. K-31602IN-E63 140 S&F in repair, 15mm bore stop cock Auto Closing System, cast copper alloy , fancy type, chromium plated, screwed for iron pipe and fixed complete all as specified anddirected. (Make : Jaquar cat part No. PRS-031 or equivalent in Marc/Kohler) 141 S&F in repair Stainless steel grating 100mm dia with centre hole of best quality as approved by GEincluding fixing in CM1:4to floor/nahani traps etc complete all as specified anddirected. 142 S & F in repairs Designer type high quality fancy type looking mirror of size 1000mmx 450mm as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed. 143 S&F in repair PVC connection 15 mm with PTMT nut of length 450mm complete all as specified and directed.complete all as specifiedand directed. 144 S & F in repair vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with brackets, flush pipe, grating and Union for discharge pipe with gratingcomplete. 145 S & F in repair CP brass urinal spreader with pipe suitablefor fixing with 15 mm dia pipe. 146 S&F 75mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors,complete all as specifiedand directed. 147 S&F in repair UPVC (SWR) floor trap, 75mm dia plain including jointing with solvent cementwith grating includingjointing to waste pipein cement concrete complete all as specified and directed. 148 M & L 20mm thick granite (Type, Size and colour as approved by GE and as per site requirement) of any type work table rubbed and polished as in floors, steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching, moulding and polishing , complete all as specified and as directed . 149 M & L for Machine cut kota stone slab flooring 18-20mm thick over and including 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing, complete all as specified and as directed. 150 Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, etc 151 M & L for preparation of plastered,unplastered or pointing olddecorated surfaces of walls including brooming down or scraping downwith steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treadingoil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of exterior acrylic emulsion paint of any tint all as per manufacturers instructions to achive desired finish at any height complete all as directed.Make : BERGER (WEATHER COAT LONG LIFE 10), ASIAN (APEX ULTIMA), NEROLAC (EXCEL MICA MARBLE), DULEX (WEATHER SHIELD MAX) 152 M&L for preparation of old painted corrugated or uncorregated steel or iron surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all specified and directed. Note :- cost of all requsit scaffolding, ladders and safety gears required for execution of work deemed to beincluded in the quotated rate of item. 153 Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured and paid separately under relevent item of this Sch as S&F in repair and credit for these item given in credit schedule here-in-after) and making good the disturbed surface all as directed. 154 S&F in replacement sub main wiring with 2 runs of6 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia PVC rigid non metallic conduit medium grade as per IS with all fittings and one run of 6 Sqmm FRLS PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed.Note:- (Two run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). 155 Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surfacefor one light pointexhaust fan point controlled by one 1-way switch complete all as directed. 156 One socket outlet point 5 amps on the same board. 157 One socket outlet point 5 amps on the independent board. 158 All as per Srl Item No 155 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for independent point. 159 S&F in replacement Modular switch 6 Amp, 1 way, 1module size complete all as directed. 160 S&F in replacement Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed. 161 S&F in replacement Modular switch 16 Amp, 1 way, 1 module size complete all as directed. 162 S&F in replacement Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed. 163 S&F in replacement modular metal flush box 6 module Complete all as specified and as directed. 164 Supply in replacementand fix modular cover plate with frame 6 module complete all as specified and as directed. 165 S&F in replacement Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed. 166 S&F in replacement of LED bulk head fitting 10W with inbuilt driver complete all as specified and directed. 167 S & F of replacement of Recess/Surfacemounting 2 x 2 square flat panel ultra slim scoop LED light 36W warm/cool white with driver/transformer etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection, complete all as specified and asdirected. 168 S & F in replacement LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watts, cool/warm white as per site requirement complete all as specified and as directed. 169 S & F of MCB DB conforming to IP 43 - IK 09 with double door , SPN 8 waycomplete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfacescomplete all as specified and as directed. 170 S&F in replacement of MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed. 171 S&F in replacement of MCB SPN B Curve type, 10 KA, 40 to 63 Amp, with over load and short circuit protection complete all as directed. 172 S&F in replacement XLPE insulated armoured heavy duty U/G aluminium conductorcable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathedof size 16 Sqmm 2 core, complete all as specified and asdirected. 173 Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides complete all as specified and asdirected. 174 Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and asdirected. 175 Removal of excavated material not exceeding 50m and depositing not exceeding 1.5m above starting point, complete all as specified and asdirected. 176 Sand cushioning with a layer of fine sand 8cm thick before laying the cable and 15cm after laying the cablein trenches to cover under ground cable complete all as specified and asdirected. 177 Material and labour for un reinforced pre cast concrete cable cover calss LV type I, flat size 250mm x 150mm x 40mm. 178 M&L for earthing complete with galvanised steel plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level , connected to and including galvanised earth lead wire 4.0 mm diaby means of bolts, nuts, washers protected by and including 15 mm bore GI Pipe “light grade” and connected to main test point as directed and including concrete pit inPCC(1:3:6) type C1 precast RCC M-25 (design mix) precast cover slab (54 x 54 x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20 mm bore GI medium grade pipe for watering, charcoal and salt in alternate layers, including necessary excavation and earth work any type of soil complete all as specified and shown in electrical plate No. 5 of SSR Part-I including testing on completion complete all as specified and directed. 179 S&F in replacement sub main wiring with 2 runs of 4 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia PVC rigid non metallic conduit medium grade as per IS with all fittings and one run of 4 Sqmm FRLS PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed.Note:- (Two run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). 180 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and depositing the old u/s item to MES store yard. 181 Supply and fix in replacement of Modular AC 25 Amp SP mini MCB, 230 Volts, 50 Hz suitable for module sheet complete all as specified and as directed. 182 Supply and fix Automatic Hand drier hot air dispenser with infrared sensor metal body with all accessories including all electrical connection complete all as specified and as directed. (Make-Euroforce or equivalent). 183 S&F of instant heating Geyser 03 liter capacity vertical type with steel tank and glass inner linen complete including fasteners (02 No) for hanging and CP and PVC connection for inlet and outlet upto stop cock including taking down geyser & depositing to MES store yard complete. 184 S&F in replacement sub main wiring with 2 runs of 2.5 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia PVC rigid non metallic conduit medium grade as per IS with all fittings and one run of 2.5 Sqmm FRLS PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed.Note:- (Two run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). 185 S&F sub main wiring with 2 runs of 4 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia PVC rigid non metallic conduit medium grade as per IS with all fittings and one run of 4 Sqmm FRLS PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed.Note:- (Two run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). 186 Supply, installation and testing of high pressure booster pump pressure tank, coupled with electric motor of cpacity 0.18 HP, dischare min 32 LPM, 230 Volts, single phase, 50 Hz including connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc including cutting of existing pipe complete all as directed. (Make :Crompton/V Guard/Khaitan). 187 Supply andfix sheet metal enclosure single pole and neutral 12 way double door.Make ABB/ Ledgrand /Schnieder 188 Supply and fixing 240V, Isolator DP 40 Amps in the MCB DB Complete with connection testing and commissioning. 189 Supply and fixing Amp rating 240V, 10KA C curve miniature circuit breaker (MCB) SP of 5 to 32 Amps capacity in the MCB DB complete with connection testing and commissioning. 190 S & F of PVC Conduit 20 mm dia suitable for 1100 volts, 230/240 Volts AC all as specified and as directed. 191 M&L 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) 20 mm outer dia UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors complete with connection testing and commissioning. 192 M&L for PP-R Gate valves (brass insert) as per requirement of the site 20 mm dia fixed complete to pipe on walls, ceilings or in floors etc. 193 M&L for PP-R fittings such as Elbow, Tee, Bend, Union, Socket etc. of size 20 mm dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc as required on site.
