Misc Repair Including Welcome Maint In Officers Qtrs Under Age B/R-1 Of Ge (Af) Subroto Park As Described In Bill Of Quantities; 1 Taking down cementplaster of any description on brick or concrete surfaces of walls or ceilingetc incl. Raking out joints , hacking for key and scrubbing down with water complete all as specified and directed 2 M&L for 15 mm thick rendering ofcement mortar 1:6, on brick work or concrete surfaces on wall and finished the surface even and smooth all as specified and directed by Engr in Charge. 3 M&L for 15 mm thick rendering ofcement mortar 1:4, on brick work or concrete surfaces on wall and finished the surface even and smooth all as specified and directed by Engr in Charge. 4 M&L for 5 mm thick rendering with cement mortar CM 1:3, on concrete surfaces as on ceiling, soffit of stair case, chhajjas facia etc including cement slurry etcfinished the surface even and smooth complete all as specified and directed by Engr in Charge. 5 M & L for preparation of new plastered surface of walls and applying two coats of OBD over chalk whitening surface complete all as specifiedand directed. 6 M & L for preparation of new surfaces and applying one coats of cement based paint complete all as specifiedand directed. 7 M&L for preparation ofnewlyplastered or unplastered surface and applying two coats of OBD on ceiling complete all as secified & directed 8 M & L Preparation of old decorative(plastered or unplaster surfaces) and applying one coat of white (lime) wash on wall surface complete complete all as specified & directed 9 All as per item no 8 here in before but in ceiling. Complete all as specified & directed. 10 Material and labour for complete removal of existing treatmentold decorated surface of walls and applying Two coats of cement based paint complete all as specified & directed. 11 M&L for applying one coats of oil bound distemper on wall/ceiling surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. 12 Material and labour for complete removal of existing treatmentold decorated surface of walls and applying two coat of oil bound distemper (white/ tinted) on walls completeall as specified & directed. 13 All as per item no 12 here in beforebut applying one coat of oil bound distemper (white) on ceilling. 14 M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.Note: -(a)Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). 15 M&L waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness1-2 mm, of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and . Sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sannding pad of 240 Grit or above having dia of 7/9 to make the surface free from dust etc. by skilled labour as per following steps:-Step 1) Mix the putty powder by adding 40-50% water and mix it with Asian PaintsTrucare Putty mixer(Trucare Putty mixer with min1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute)Step 2)Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine(Model: Mark VII) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041Step 3) Allow 6-8 hrs time to dry the putty surface Note:(a) Masking of window/doors during spray painting using polythene film will be included in the unit quoted rates. 16 M&L preparation of old plastered surface of walls/ceilingand applying 1-2 mm thick wall care putty complete all as specified & directed. 17 M&L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent having anelectric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified & directed. 18 M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay Technology ,Excellent Dirt Pick up Resistance of Asian Paints Ltd or its equivalent with low VOC less than 50 , Anti Algea properties in two coats@ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint with 8 years performance warranty from Manufacture and instructions complete all as per specified & directed. 19 M&L for preparation of new plastered surfaces of walls & applying one coat of acrylic water based interior grade primer @ 0.8 ltr(undiluted)/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spraymachine of paint application of Asian Paints Trucare Graco or equivalant having anelectric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of3300 PSI.Allow 6-8 hrs to dry the surface for painting of subbsequent quotes.complete all as per specified & directed. 20 M&L for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per Ir complying LEEDS criteria @1 Its(undiluted) /10 sq mtrs Diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray Machine of paint application with a flow speed of min 1 tr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as specified and directed. 21 Material and labour for preparation of old decorated surface of wallsand applying one coat of exterior emulsion (colour matching with existing) paint by roller brush of approved manufacturercomplete all as per manufactures instruction and directed. 22 Material and labour for complete removal of existing treatmentold decorated surface of walls and applying cement based wall care putty 1mm thick (average) and applying two coats of plasticemulsion (any colour) paint to achieve uniform and smooth surface by roller brush over a coat of primer of same manufacturercomplete all as per manufactures instruction and directed. 23 M & L for preparation of old painted wooden/steel/concretesurface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specifiedand directed. 24 S&F in repairs PVC sheet cover for One pieces EWC soft closing type complete all as specified and as directed by Engr-in charge. 25 S & F in repair CP mixture with swivel spout for kichenhot and cold water screwed for 15mm bore iron pipe and fixedcomplete all as specified and as directed Make cat part No Kitchen Sink Mixer SOL-6309 of Jaguar or equivalent 26 S & F in repair CP mixture 2 way for hot and cold water screwed for 15mm bore iron pipe and fixedcomplete all as specified and as directed. Make cat part No COP-119PM of Jaguar or equivalent 27 S & F in repairbrass (spindle) formixture/Bib tap /concealled stop cockfor iron pipe 15mm bore fixedcomplete all as specified and as directed. 28 S&F in repair two in one angle valvescrewed for 15mm bore iron pipe and fixedcomplete all as specified and as directed Make cat part No SQT-526AKN of Jaguar or equivalent 29 M&L for Complete Removal of tree roots from roof top/wall upto 4 story building upto depth 40mm incl making goodhole with CM 1:3 and matching painting complete all as specified & directed. 30 M&L for touch-up work area n exc 2.00 Sqm withOBD on wall surfaces in existing matchingcolourincluding preparation of surfaces complete all as specified & directed. 31 M & L for staining and varnishing wood and wood based surfaces of any description over 10 cm in width or girth and applying thin varnishing including preperation of old treated surfaces complete all as specified and directed. 32 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing unserviceable tiles to store and rubbish off the premises complete all as specified & directed. 33 Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris out side defence land from the site complete all as specified & directed. 34 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and remove the debris outside from MOD land complete all as specified and directed. 35 M&L for RCC(1:2:4) type B-1 (using 20 mm graded stone aggregate) as in Slabs supported on walls and the like complete all as specified and directed. 36 M&L Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. 37 M&Lfor Formwork tolintels, cantilevers, shelves including supports, overhangs, etc. Fair finished surfaces of concrete flat complete all as specified and directed. 38 M&Lfor Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 5 cm wide & sides of RCC/PCC bands in walls, horizontal or sloping & similar work n exc 5 cm but n exc 10cm wide Roughed finished surface of concrete complete all as specified and directed. 39 M&L16-18mm th Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10mm thick screed bed or bedding layer of cement mortar 1:4, including dismantling of existing stone slab complete all as specified and directed. 40 Demolition to brickwork or stone/boulder masonry, built in cementmortar complete all as specified and directed. 41 M&L for brick work with subclass B old size bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed. 42 M&L forvitrified double charge ceramic tiles 9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/ Skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specifiedand directed. 43 M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate)as in sub base for the tile flooring complete all as specified and directed. 44 M&L Glazed printed/ coloured ceramic tiles in vertical surface 350mm x 250mm x 7 mm/ 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specifiedand directed. 45 S&F anti skid printed and coloured ceramic tiles area of each tiles exceeding 0.06sqm but not exceeding0.18 Sqm and 7mm thick as in floor set &jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and as directed 46 M & L 15 mm thick screed bed or bedding layer ofcement mortar (1:6), for laying of floor finishes complete all as specified and as directed. 47 M&L for rendering 10 mm thick in cement mortar 1:4 on fair face of brick work or concrete surface for rough finish complete all as specified & directed. 48 S&F in repair 18mm thick PVC foam board (WPC) of density 600kg/cum one side prelam and other side plain for kitchen cabinet shutter including fixing of 0.8mm thick acryliclaminates as edge bandingin matching colour over all exposed edge Complete all as specified and directed. 49 S&F in repair factory made 18mm-19mm thick plain PVC foam board of density 600kg/cum manufactured by an ISO-900-2008 certified company for Shelf / Partitions / Drawer Complete all as specified and directed. 50 S&F in repair 5mm thick PVC foam board of density 600kg/cum both sideplain for kitchen cabinet shutter Complete all as specified and directed. 51 S&F in repair 100 mm size Stainless Steelhandle, complete all as specified anddirected 52 S&F in repair 38mm size Stainless Steel Piano hingescomplete all as specified anddirected. 53 M &L in repair forABS body magnetic latches of size 30mm complete all as specified anddirected. 54 S&F in repair Stainless Steel telescopic channel 500mm long,complete all as specified anddirected. 55 Taking downframe or Chowkhats (without taking off shutter from the frame ) of any description exc. 1.50 Sqm and not exc. 4.00 Sqm each complete all asspecified and directed. 56 Taking downframe or Chowkhats (withouttaking off shutter from the frame ) of any description notexc. 1.50 Sqmeach complete all asspecified and directed. 57 Taking down Door shutter of any descriptionexc. 1.0 Sqm but n exc 2.0 Sqm each complete all as specifiedand directed 58 S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,size 105mm x 60mm inclframe backfilling with PCC 1:3:6complete all asspecified and directed 59 S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,size 165mm x 60mm inclframe back filling with PCC 1:3:6complete all asspecified and directed. 60 M&L Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepred for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running, also fasting and fixing complete. 61 S&F 35 mm thick Flush door shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all asspecified and directed. 62 S&F 2nd class HW glazed and Skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamferedor rounded, fitted with cut and mitred beads for securing glass. Gauze size of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) etc complete all asspecified and directed. 63 S&F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm.etc complete all asspecified and directed. 64 M&L for two coats of synthetic enamel paint over a coat of pink primer on new woodsurfacecomplete all as specifiedand directed. 65 S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification & drawing complete all asspecified and directed. 66 S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of framemade out ofMS tubes for top and bottoms railsMS frame shall be covered with heat moulded plain colour PVC Chennel having a PVC sheet strip of 20 MM width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gep insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement, complete as specified anddirected. 67 S&F Butt hinges, medium weight, cold rolled, mild steel of size 100mm.complete all as specified anddirected. 68 S&F 125 mm length aluminium, anodized, barrel tower bolts of extruded section complete all as specified anddirected. 69 S&F 150 mm size aluminium handle, cast type anodized complete all as specified and as directed. 70 S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifiedand directed. 71 S&F in repair door stopper of aluminium , alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specifiedand directed. 72 S& F in repair Aluminium door cill strip Approx length 1m colour black, shape rectangular, brush type polypropylene, water resistant to seal the gap between door and floor fixed with screw/nail, complete all as specified and directed . 73 Hacking out old broken glass (any thickness, size, quality or description) from wooden/Steel/Aluminium framesglazed with putty or fixed with bead. (Old bead to be reused to fix glass) complete all as specified and directed . 74 S&F 4mm thick sheet glass, selected quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed 75 S&F 4mm thick frosted floatglass and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed 76 S&F in repairStainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed 77 Supply & fix sheet glass 5.5mm thick of selected quality exc. 0.5 Sqm each fixed to aluminium frame work with necessary rubberbeading complete all as specified and directed 78 Taking down old steel /wooden windows with hold fast & making good surface and S&F new windows/ ventilators fabricated from 0.60mm thick rollformed section made of galvanisedsteel powder coated (Base steel as per IS-513D quality) galvanised as per IS-277 with ZINC of 120GM/SQM .Windows /ventilators having frame suitable fordual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mmx12mm flat ironwith 10mm square bar M.S. grill and all fitting, fixtures accessories complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series).complete all as specified and as directed.Note : (i)Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per above mentioned drawing deemed to be inclusive in the rate quoted for unit.(ii)Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only. 79 M & L for dismantling unserviceablewater tanks any description exc 500 but not exc 1000 Liters complete all as specified and as directed by the Engineer-in-Charge 80 All as per item No 79 here in before but 250 but not exc 500 Liters. 81 S&F for 1000 Litres capacity rotational moulded polyethylene water storage tanks, triple layer(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed. 82 All as per item No81 here in before but 500 Liters capacity. 83 S&F as in repair PVC tank lid (cover) suitable for 500/1000 litres capacity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on buildings complete all as directed by Engineer -in-Charge. 84 S&F in repairPTMT valve high pressure with ploythenic float and fly nutcomplete screwed for iron pipe or brass ferrule20 mm dia.complete all as specified and as directed. 85 S&F in repairsPVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc,complete all as specified anddirected. 86 S&F in repairs PVC (SWR) bend any radius of 110 mm dia. compelte all as specified and directed by Engineer - in - Charge 87 S&F in repair 15mm borebib tap standard or PTMT colour high pressure screwed for iron pipe and fixed (min wt 15mm-90 gms) Complete all as specified & directed. 88 S&F in repairs PVCflushing cistern , 10 Ltrs Capacity low level, white, with inlet, ball valve, float and handle including bracketsand connections to pipes complete all as specified and directed 89 S & F in repairs15 mm bore Stop valves (concealed type) cast copper alloy screwed down high pre-ssure with crutch or but terfly handle screwed both ends for iron pipe or forunions and fixed but fancy type chromium plated with long shank and cup complete all as specified anddirected. 90 S&F in repairs Stop valves/Angle valve 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions,complete all as specified anddirected. 91 S&F in repairs CP Bib taps 15 mm borelong body, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type,complete all as specified anddirected. 92 S&F in repair 5 mm fancy type frame less designer looking mirror with carving at one corner and rounded edges of selected quality glass and fixedwith 4 nos SS studs ofsize600mm x 900mm complete all as specified and directed. 93 S&F in repair brass CP shower rose 150 mm square size with arms 15 mm dia 195 mm long with bends 45 mm degree with flange of brass complete all as specified and directed. 94 S&F in repairs brass CP health faucet including tube 1.2 mtr longcomplete all as specified and as directed by Engr-in charge complete all as specified and directed. 95 S&F in repairs fancy type CP cast copper alloy pillar tap single leaver basin mixer without popup waste system with 450 mm long braided hoses cat No DRC-37011B make Jaquar or equivalent of any colour for basin 15 mm dia screwed down high pressure with long screwed shank sand fly nuts screwed for iron pipe fixed . complete all as specified and directed 96 S&F in repairs 15mm borebrass Fancy type single leaver wall mixer with provision of hand shower, but without hand shower,chromium plated screwed down for iron pipes or brass ferrule all as specified and directed by Engineer-in-Charge. 97 S&F in repairPVC connections 15mm bore size with PTMT nuts of length 450mmcomplete all as specified and directed by Engineer-in-Charge. 98 S&F in repair 5mm thick glass sheet shelf 12 mm wide with CP bracket guard and railing 45 cm longcomplete all as specified and as directed by Engineer-in-Charge. 99 S&F in repair 5 mm thick glass corner with 12 dia with steel railing and fixed with CP screw & cup washer on wall complete all as specified and as directed by Engineer-in-Charge. 100 S&F in repairs PVC cabinet mirror complete all as specified and as directed by Engr-in charge 101 S&F in repairplastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed 102 S&F in repair brass chromium plated waste coupling 40mm bore kitchen sink complete all as specified and as directed. 103 S&F in repairs 32mm bore and 75cm long PVC flexible waste pipe for WHB complete all as specified and as directed. 104 S & Fin repair wash hand basins, vitreous china flat back of size 630 mm X 450 mm including cutting for and pinning in ends of brackets or erecting stand including brackets duly painted, etc complete all as specified and directed 105 S&Fin repairs Vitreous china wash down water closet pan(pedestal pattern)including connection to drain (or outgoing pipe) and to flushing pipe antisphonage pipeincl all joints complete all as specified and directed. 106 S&F in repair vitreous china squatting pan “Orissa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, PVC ‘P’trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed. 107 S&F in repairs sinks made of stainless steel 1.0 mmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. 108 S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. 109 S&F in repairs stainless steel rack for kitchen utensil made out of 22 gauge sheet & overall size 900mm x 750mm fixed to wall with screwscomplete all as specified and directed. 110 S & F asin repair 25mm dia MS powder coated drapery rodincluding all necessary fixing arrangement like clamps, end brackets, end to end bracket complete all as directed and specified. 111 M&L for Welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as gates, grills, doors, windows etc., complete all as specified and directed. 112 M&L for Cleaning and removing all scales and dirt etc by scraping with hard plastic/nylon wire brush and washed with bleaching powder solution and thereafter washed with clean water from service water tank and mouth of circulating pipe of capacity of tank exc. 250 litre but not exc. 500 litrecomplete all as specified and as directed . 113 All as per Ser item No 112 here in beforebut capacity of tank exc.500 litre and not exc.1000 litre. 114 Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. 115 Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. 116 S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floorsincl Cutting chases as required complete all as specified and directed. 117 S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, incl Cutting chases as requiredcomplete all as specified and directed. 118 S&F in repairspowder coated aluminium frame work fordoors, windows,partition s etc incl grill for windows for windows etc with one or more rebated section incl jointing cleats for fixingetc complete all as specified and directed 119 S&F in repairs powder coated anodised aluminium door shutters, partition wall, aluminium section weighting 0.55 Kg/Rm incl necessary joining cleats glazing clips rubber neoprene packing, handles two Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified anddirected. 120 S&F in repairspowder coated anodised aluminium window and ventilator shutters ,sliding type for windows without sash bars aluminium section weighting 0.55 Kg/Rm incl necessary joining cleats glazing clips rubberpacking, aluminium anodised snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( hinges type B-21 100 mm long (2Nos) suitable handles (1Nos) complete all as specified anddirected. 121 S&F in repairs12mm thick prelaminated board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work complete.all as specified and directed by Engineer - in - Charge . 122 S&F in repairs5.5 mm thick selected quality tinted sheet glass and glazing clip in square fixed with PVC/neoprene gasket in aluminium frame work complete. all as specified and directed by Engineer - in - Charge . 123 S&F in repairsbrass six lever dead lock suitable for aluminium doors manufactured complete all as specified and directed 124 S&F in repairs Stainless Steel peg stay with 06 Nos pin (door cloth hanger) complete all as specified and directed by Engineer - in - Charge 125 Supply and fixin repair counter top oval shape any coloured wash hand basin of size 48cmx48cm depth 13cmCat part of Jaquar OPS-WHT-15901N or Equivalent in cera, hindware complete all as specified and directed. 126 Supply and fixin repairfortoughened glass of 12 mm thick of any colour as directed by GE as in doors, partitions, windows, bathing cubicalwith sliding dooretc with Kolf SAFEX or OZONE fittings accessories like handle, door machine and all necessary required accessories/fitting for fixing complete, all as specified and directed by Engineer-in-Charge. 127 S&F in repairvitreous china colouredOne piece EWCs with integrated cistern, seat cover and twin flush fittings and including P or S trapetc. all as specififed. and making good to floor complete all as specified and directed by Engineer - in -Charge. 128 M & L 40 mm thick Cement Conrete1:2:4 type B–1 (using 20mm graded stone aggregates) as inflooring laid indirected andfinished even and smoothusing extra cement complete all as specified and directed by Engineer - in – Charge . 129 M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes complete all as specified and directed 130 M&L as in repair for Chequered cement concrete coloured tiles withglossy finished200mmx200mmx25mm thickconfirming to IS -1237 (rubber form moulded)anysize in floors etc,set, jointed & pointed with cement slurry 15mm thick bedding layer of cement sand mortar (1:6) complete all as specified and directed 131 M& L as in repair for 60 mm thick, M-35 grade machine pressed rubber form moulded precast interlocking concrete paver block over 35mm average thickness in any shape and size as approved confirming to IS 15658-2006complete all as specified and directed 132 M&L for sand filling under floor or in foundation including watering & consolidation complete all as specified and directed by Engineer-in-Charge. 133 Taking down old false ceilling any type and description & M&L for gypsum false ceilings withsize 60cm x 60cmx9mm thickfalse ceiling tileslaminated onface and side with decorative PVC films and a metalize polyester film on back sides back in dew drop texture Ceiling tiles shall be fixed over and inclPowdered coated GI T- grid system of size 600X600 mm as per the manufactures instructions complete all as specified and directed.Note Rates includes for taking down electrical fitting and refixing the same if required 134 M & L complete removal of existing treatment of wallsand applying10mm thick plaster of Paris ceiling (Gypsum anhydrous) to sunk or raised moulding to flat surface overmetal frame work inclreinforced with G.I. wire mesh & Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre & Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.Note Rates includes for taking down electrical fitting and refixing the same if required complete all as specified and directed. 135 M&L for dismantling loose concrete cover of RCC slab, Ceiling, columns, beams, chajjas, balconies, stair case and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, removing of rust from existing steel surfaces and cleaning all rust with steel wire brush and washed with water and allowed to dry including S&F welded fabric GI wire mesh or wire, size not less than 75mmx75mm and 3.00 mm dia as reinforcement to concrete. After placing the additional reinforcement, all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and allowed to dry. To this surface, apply chemical polycrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness) guniting mix (using 1 part of Cement and 2 parts of Ghaggar sand mixed with adhesive/admixture at the rate as directed) with a pressure of 2 to 2.5 Kg per Sqcm by guniting machine and surfaces finished even and fair including necessary padding, shuttering/form work etc a complete all as specified and directed by Engineer-in-Charge.Note: (i) Where ever steel reinforcement required rate of the same deemed to be included in the quoted rate.(ii) Work to be executed for upto four storey buildings and in Patch work. 136 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed. 137 Excavating in post holes(or similar holes)each n exc 0.5 cum ,getting out soft or loose soil ,returning ,filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm complete all as specified & directed. 138 M&LPCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed 139 S&F angle iron as in posts and struts in fencing including cutting tops to shape as directed , drilling holes notching for wire etc, flat iron fillets(for securing wire mesh etc)including all necessary drilling bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed. 140 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed 141 Supply only Chain link MS galvanisd fencing, any size or typecomplete all as specified directed 142 S&F in repair CP cast copper alloy soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed by Engineer-in-Charge. 143 S&F in repair Towel Ringfixed with and including Chromium plated brass , screws and wooden/plastic cleats etc complete all as specified and as directed by Engineer-in-Charge. 144 S&F in repair 25mm thick precast cement concrete 1:2:4 type B-0 (using 20mm graded stone aggregate) louvres and jallies(measured solid), including all mouldings but excluding frame complete all as specified & directed. 145 S & F in repair pre-painted galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/ cladding to wall fixed with self taping screws complete all as specified and directed by Engineer-in-Charge. 146 S & F in repair pre-painted galvalume Aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/ cladding to wall fixed with self taping screws complete all as specified and directed by Engineer-in-Charge.
