Purchase Of Various Testing General Apparatus (Lab Equipment) In Quality Control Labs For All Zone , Flash And Fire Point Apparatus: Supply , Installation & Commissioning Of Pensky-Martens Closed & Open Tester Electric Operated Apparatus For Determination Of Flash & Fire Point Of Tar & Bituminous Material As Per Is:1209-2021 Using Method A,B & C . The Complete Apparatus And Its Accessories Shall Be Supplied, Which Shall Confirm As Per Is:1448 (Part-21) -2012 /Iso 2719-2002 & Is: 1448 (Part-66)-1969 (Reaffirmed 2003) And The Complete Item Shall Be Supplied As Per Direction Of Engineer In Charge . The Appartaus Shall Include :- Brass Or Copper Test Cup Capacity 50 Ml. With Tight Fitting Lid. Stirring Mechanism (Motorized), Flame Application Device With Shutter , Electrically Heated Base With Adjustable Heating Rate (1° - 6° C Per Minute) , Standard Thermometer(0° To 370° C) , Heavy Duty Stand With Insulated Housing With 3.0 Metre Power Cord & Power Plug Etc Complete. Rates Are Inlusive Of All Taxes . , Vibrating Machine With 7.06 Cmx7.06 Cm X7.06 Cm Cube Moulds :- Supplying , Fixing And Commissioning Electric Operated Vibrating Machine With Mould Confirming To Is: 10080-1985 (Reaffirmed 2004) Which Shall Be Capable For Compaction Of Cement Mortar Cube Required As Per Is:4031. The Complete Frame Assembly Shall Consist Of Device To Hold A 7.06 Cm Mould To Feed The Sample In A Mould. Vibrator Shall Be Mounted Over Coiled Spring To Carry The Cube Mould And Vibrations Are Developed By Mean Of A Revolving Eccentric Shaft. Instrument Shall Be Fitted With Belt Guard. Electric Motor Of Any Reputed Company Is Driven By An Endless Belt Running On A Crowned Pully On The Vibrating Machine. Digital Time Shall Be Also Be Fitted With Digital Timer And Switch For Ease Of Operation. Main Key Features & Technical Specification Of Machine & Accessories Shall Be As Under :- - Frequency Of Vibration :- 12000 + 400 Rpm - Power Supply :- 230 V , 50 Hz , Ac Supply Single Phase - Motor Capacity :- Min. 3/4 Hp , 2800 Rpm - Cube Mould For Cement (6 Nos With Base Plates ) :- As Per Is:10080, Size 7.06 Cm X 7.06 Cm , Weight Of Mould Shall Be 2.8 + 0.2 Kg Of Ms Instrument Supply Shall Include Standard Sand Gr.-I, Ii & Iii , Cube Mould , Poking Rod , Mortar Mixing Plate , Suitable Power Cord Min. 3.0 Mtr Long With Power Plug Etc. The Complete Item Shall Be Supplied As Per Direction Of Engineer In Charge .Rates Are Inlusive Of All Taxes . , Vicat Needleapparatus :- Supply Of Vicat Apparatus Complete Set Confirming To Is:5513-1996 Suitable For Determining The Consistency, Setting Time , Soundness Of Cement & Standard Consistency As Per Is 4031. The Apparatus Shall Consist Of A Metallic Frame With Movable Rod Carrying Interchangeable Attatchments , Consistency Plunger (Polished Brass Having Dia 10 + 0.05 Mm, Length 50 + 1 Mm With Lower Edge Flat) Initial Setting Needle (Dia 1.13 + 0.05 Mm ) Final Setting Needle (With Annular Collar ) And A Conical Mould (Top Diameter 70 ± 0.5 Mm, Bottom Diameter 80 ± 0.5 Mm, Height 40 ± 0.5 Mm.) . The Plunger Assembly Shall Allow Free Vertical Movement And Include A Graduated Scale For Measuring Penetration Depth . The Apparatus Shall Be Supplied With A Glass Base Plate.Apparatus Shall Include , Gauging Trowel, Stopwatch, All Accessories Shall Be Supplied In A Protective Box And As Per Direction Of Engineer In Charge .Rates Are Inlusive Of All Taxes . , Gi Sieve Set 45 Cm.Dia With Lid & Pan (Complete Set) :- Supply Of Is Sieve Set For Coarse Aggregate Having Dia Of 45Cm Made Of Gi Sheet With Seamless Welding. Each Sieve Should Having Rounded Edges At Top For Safe Operation. Each Sieve Must Be Of Tight Fitting To Each Other. Sieves Set Finishing & Sizes Shall Comply Is 460-2020 And As Per Direction Of Engineer In Charge.Rates Are Inlusive Of All Taxes . Each Set Consists Followings :- 125Mm, 100Mm, 90Mm, 80Mm, 75Mm, 63Mm, 53Mm, 50Mm, 45Mm, 40Mm, 37.5Mm, 31.5Mm, 26.50Mm, 25Mm, 22.40Mm, 20Mm, 19Mm, 16Mm, 13.2Mm, 12.50Mm, 11.2Mm, 10Mm, 9.50Mm, 6.70Mm, 6.30Mm, 5.60Mm, 4.75Mm, 3.35Mm, 2.80Mm, 2.36Mm, With One Lid & Pan. (Total Sieves With Pan = 31 Nos.) , Brass Sieve Set 20 Cm. Dia With Lid & Pan (Complete Set) :- Supply Of Is Sieve Set For Fine Aggregate Having Dia Of 20Cm. Made Of Rolled Brass. Brass Frame Must Be Joint Less & Rounded Edges At Top For Safe Operation. Each Sieve Must Be Of Tight Fitting To Each Other. Sieves Finishing & Sizes Shall Comply Is 460-2020And As Per Direction Of Engineer In Charge. Rates Are Inlusive Of All Taxes . Each Set Consists Following Sieves :- 10Mm, 9.50Mm, 4.75Mm, 2.36Mm, 2.0Mm, 1.70Mm, 1.40Mm, 1.18Mm, 1.0Mm, 710 ? , 600?, 425?, 355?, 300?, 212?, 180?, 150?, 90?, 75?, With One Lid & Pan. (Total Sievs With Pan Of 20 Nos.) , Compacting Factor Apparatus :- Supplying & Fixing Compacting Factor Apparatus Confirming Tois: 5515-1983 Capable For Determinacy Compaction Factor Of Fresh Concrete As A Measure Of Its Workability As Per Is : 1199 (Part-2) : 2018. The Apparatus Shallcomprises The Following. -Two Conical Hoppers With Trap Doors Of 3Mm Thick Metalplate, One Cylindrical Receiver Of 0.005 Cum Capacity. A Welded Steel Stand For Mounting The Hopper And Receiver Coarually At Specified Distance, Two Trowels, One Hand Scoop, One Standard Tamping Rod 16 Mmø X600 Mm Long, Other Ancillary As Per Is Standards.The Complete Item Shall Be Supplied As Per Direction Of Engineer In Charge . Rates Are Inlusive Of All Taxes . , Vibrating Table Size 1.0Mx1.0M :- Supply, Fixing And Commissioning Of Vibrating Table For Compactions Of Concrete Cube, Cylinder Within Its Mould.Vibrating Table Shall Confirm To Is :2514-2023 And Shall Be Capable To Prepare Test Specimen As Per Is :1199 (Part-5) :2018. The Main Technical Details Shall Be As Under :- Size – 1.0 M X 1.0M Min Frequency Of Vibration – Min 50Hz (300 Cycles/Min) Range –3000 Cycles/Min-6000 Cycles/Min Height– 750Mm From Ground Surface Table Top– Min 10Mm Cushioned Steel Plate Or Equivalent Material. Suitably Braced And Stiffened To Vibrate Evenly So That There Is No Significant Variation In Vibration Characteristics. The Complete Item Shall Be Supplied As Per Direction Of Engineer In Charge . Rates Are Inlusive Of All Taxes . , Core Cutting Machine With 3 Hp Motor :- Supply Of An Advanced Core End Grinding Machine Designed For Single End Grinding Of 150Mm Dia Concrete And Bituminous Pavement Cores, The Machine Shall Be Equipped With A 450Mm Diamond/Carborundum Grinding Wheel, Variable Speed Motor (Upto 2200 Rpm), Water Cooling System And Achieve Good Flatness With Spindle Motor 3.00 Hp(Minimum). Heavy Duty Steel Frame, Anti Vibration Pads, Emergency Stop Switch, Overload Protection, Blade Housing Clearance For 450 Mm Disc Rotation With Saftey Guard. Machine Shall Operate On 415 V ± 10%, 10 Hz, 3-Phase Ac Supply. The Machine Shall Be Supplied With Necessary Tools, Operating Manual And Spares Part (Minimum 1 Spare Grinding Of Diamond/Carborundum Wheel Each Type Min. Thickness 6 Mm) And As Per Direction Of Engineer In Charge. Rates Are Inlusive Of All Taxes . , Digital Weigh Balance 10 Kg Capacity: - Supply Of Digital/ Electronic Weigh Balance Of 10 Kg. Capacity With Least Count 0.1 Gmshall Confirm To Is:9281 (Part-3 ) -1981 (Reaffirmed 1985). Balance Shall Have Table Top Platform Of Stainless Steel (Grade 304) With Rust Proof Body With Tare Facility. There Shall Be Large Lcd Display On Both Side With Bigger Keys. Balance Shall Have Adequate Levelling Facility With Adjustable Screws. Technical Specifications Shall Be As Under:- Maximum Capacity :- 10 Kg, Least Count :- 0.1 Gm, Accuracy :- Ii Class (Minimum + 0.05% ), Pan Size :- 250 Mm X 300 Mm Or More Shall Be Preferred . Power Requirment :- 230 V Ac Or 6 V Dc With Power Battery Backup With 3.0 Metre Power Cord & Power Plug. The Complete Item Shall Be Supplied As Per Direction Of Engineer In Charge .Rates Are Inlusive Of All Taxes . , Cbr Mould With Accessories :- Supply Of Cbr Mould Assembly For Laboratory Testing Of Subgrade Soil As Per California Bearing Ratio (Cbr) Method. Assembly Shall Include: 150 Mm Dia × 175 Mm Height Mould With Base Plate, Stay Rod, Wing Nut, Cutting Collar, Spacer Disc And Handle, Slotted And Annular Surcharge Weights (2.5 Kg Each),Expansion Measuring Apparatus(Adjustable Stem With Perforated Plate And Tripod) Suitable For Use With Loading Machines. Entire Set Shall Confirm To Is: 2720 (Part 16):1987 & Is 9669:2025. The Complete Item Shall Be Supplied As Per Direction Of Engineer In Charge .Rates Are Inlusive Of All Taxes . Rates Are Inlusive Of All Taxes . , Slump Test Apparatus :- Supply Of Slump Test Apparatus Consisting Of Slump Cone (Size Top Dia 100 Mm, Bottom Dia 200 Mm, Height 300 Mm), Made Of Galvanized Iron/Mild Steel, Sheet Not Readily Attacked By Cement Paste And Having At Least 1.60 Mm Thickness Shall Include Mould, Base Plate,Rule, Shovel, Re-Mixing Tray, Scoop And Tamping Rod (16 Mm Dia × 600 Mm Length). Apparatus Shall Confirm To Is: 7320-1974 (Reaffirmed 2008) Capable For Determine Slump Value Of Fresh Concrete As A Measure Of Workability As Per Is:1199(Part-2)-2018. The Complete Item Shall Be Supplied As Per Direction Of Engineer In Charge . Rates Are Inlusive Of All Taxes . , Ci Concrete Cube Mould (15X15x15 Cm) :- Supply Of 15X15x15 Cm Cube Mould Used For Preparing Standardized Specimen To Assess Compressive Strength Of Concrete. Cube Moulds Must Be Made Up Of Cast Iron To Ensure Durability, Dimension Stability & To Give Necessary Strength And Rigidity. Internal Faces Of Moulds Must Be Of Machine Finished And Distance Between Opposite Faces Should Be 150Mm With A Permissible Tolerance Of ± 0.2Mm. The Moulds Should Be Stout Enough To Prevent Distortion. It Should Be Madeup In Such A Manner As To Facilitate The Removal Of The Molded Specimen Without Damage And Should Be Machined In Such A Way That When They Are Assembled Ready For Use, The Dimension Shall Be Accurate Within The Specified Limits. The Base Plate Should Be Attatched To The Mould By Cleats Or Secured With Threaded Studs And Nuts/Wing Nuts, Weight Of The Mould Should Be About 13.50 To 14.0 Kg. Mould Shall Confirm Tois : 516, Is:10086-2021 Along With Necessary Accessories And As Per Direction Of Engineer In Charge. Rates Are Inlusive Of All Taxes . , Standard & Modified Proctor Compaction Test Apparatus :- Supply Of Compaction Mould Assembly For Light & Heavy Compaction Test For Soil , Grannular Sub Base & Base Course Material Confirming To Is : 10074 -1982 (Reaffirmed 2006) Alongwith Compaction Hammer For Soil Testing Confirming To Is :9198 -1979 (Reaffirmed 2002).The Equipment Shall Be Capable To Determine Maximum Dry Density (Mdd) And Optimum Moisture Content (Omc) As Per Is: 2720 Part 7 & Part 8. The Complete Set With Assembly Shall Have Moulds For Light And Heavy Compaction Each Or As Per Direction Of Engineer In Charge. Accessoriesas Compaction Mould, Coller , Base Plate Shall Be Made Of Mild Steel. Rates Are Inlusive Of All Taxes . , Sand Pouring Cylinder (200 Mm Dia With Centre Hole Plate) :- Supply Of Large Pouring Cylinder Apparatus With Cylinder Diameter Of 200 Mm, Suitable For Fine,Medium And Coarse Grained Soil To Determine Field Dry Density Testing Using Sand Replacement Method. The Set Shall Include200 Mm Dia Sand Pouring Cylinder With Shutter Mechanism, Metal Tray Of 450 Mm Square And 50 Mm Deep Plate With 200 Mm Dia Hole At Centre, Cylindrical Calibration Container With Internal Dia Of 200 Mm And An Internal Depth Of 250 Mm, Plane Surface Of Glass Or Other Material Of 600 Mm Square And 10Mm Thick And Excavating Tool Such As Dibber, Bent Spoon, Large Screw Driver, Pointed Steel Rod 300 Mm Long And 5 To 10 Mm Dia With Wooden Handle. Apparatus Shall Be Capable For Determine Field Density As Per Is: 2720 (Part 28):1974. The Complete Item Shall Be Supplied As Per Direction Of Engineer In Charge .Rates Are Inlusive Of All Taxes . , Capping Apparatus :- Supply Complete Capping Set Suitable For Concrete Core Specimens Of Core Size Mentioned Below, Comprising Steel Capping Moulds, Precision Machines Steel Base Plates, Alignment Guide And An Electric Themostatically Controlled Melting Pot (Capacity 5-10 Litre, Heating Range 15-150°C.) For Sulpher Capping Compound Includes 25 Kg. Sulpher Based Capping Mix , Levelling Tool And Personal Protective Equipment (Ppe) Such As Heat Resistant Gloves, Saftey Goggles And Apron, Capped Surface Flatness To Comply With Is:516(Part-I/Sec-I):2018 , Is 1199 Part-5: 2018 With Tolerance = 0.05 Mm. The Com[Plete Set Shall Be Supplies As Per Direction Engineer In Charge . Rates Are Inlusive Of All Taxes . , Size 150 X 300 Mm , Size 100 X 200 Mm , Digital Weigh Balance 3 Kg Capacity:- Supply Of Digital/ Electronic Weigh Balance Of 3.0 Kg. Capacity Withleast Count 0.1 Gmshall Confirm To Is:9281 (Part-3 ) -1981 (Reaffirmed 1985). Balance Shall Have Table Top Platform Of Stainless Steel (Grade 304) With Rust Proof Body With Tare Facility. There Shall Be Large Lcd Display On Both Side With Bigger Keys. Balance Shall Have Adequate Levelling Facility With Adjustable Screws. Technical Specifications Shall Be As Under:- Maximum Capacity :- 3.0 Kg, Least Count :- 0.10 Gm, Accuracy :-Class I (Minimum + 0.02% ), Pan Size :- 175 Mm X 225 Mm (Appox). Power Requirment :- 230 V Ac Or 6 V Dc With Power Battery Backup With 3.0 Metre Power Cord & Power Plug. The Complete Item Shall Be Supplied As Per Direction Of Engineer In Charge .Rates Are Inlusive Of All Taxes . , Digital Thickness Gauge 0.001X10mm :- Supply Of A Digital Thickness Gauge Suitable For Measuring The Thickness Of Paper, Plastic Film Etc. With Precise Measurement Range 0-10 Mm & Lc 0.001Mm (1?) . Digital Lcd Display With Zero Reset Facility, Standard Presure (As Per Iso: 4593 Not Exceeding 1 N) , Flat Paralled Anvils ( 6-10Mm Dia, Stainless Steel,) (Cr 2032) Battery Operated, Handy Supplied In Protective Carry Case With Valid Calibration Certificate. The Com[Plete Set Shall Be Supplies As Per Direction Engineer In Charge . Rates Are Inlusive Of All Taxes . , Hot Plate For Bitumen :- Supply Of Bitumen Sample Heating Plate, 200 Mm Diameter, 1500W, With Thermostatic Temperature Control, Cast Iron Top And Powder-Coated Body With 3.0 Metre Power Cord & Power Plug, Which Shall Be Used For Sample Preparation And Heating In Bitumen Tests Etc. Power Requirement Shall220v Ac, 50 Hz. Apparatus Shall Conform To Is: 1205:2022 And Is 365:1983 (Reaffirmed2019).The Complete Item Shall Be Supplied As Per Direction Of Engineer In Charge . Rates Are Inlusive Of All Taxes . , Pycnometer Bottle Supplyingpycnometer (Glass Vessal) Of About One Litre Capacity Having A Brass Matel Conical Screw Top With A 6Mm Dia Hole At Its Top. The Screw Top Shall Be Watertight When Screwed On To The Jar Within Marked Place By Rubber Or Fibre Washer/Seal And Screw Ring. The Apparatus Shall Be Capable To Determine Specific Gravity, Water Absorption Of Aggregate As Per Is:2386 (P-Iii)-1963 (Reaffirmed-2002) And As Per Direction Of Engineer-In-Charge. The Quoted Rate By Supplier Shall Be Inclusive Of All Taxes. , Digital Thermometer Withtemperature Probe :- Supplyingdigital Thermometer Hand Held Battery Operated Which Shall Be Capable To Measure Temperature Using Sensor. Sensor Shall Be Of 6Mm Dia, 300 Mm Long Ss Rtd Type Probe Having Minimum 3.0 Mtr. Long Cable.The Quoted Rate Shall Be Inclusive Of All Taxes. Key Features Shall Be Under :- Temperature Measuring Range - -50°C To 300°C. , Resolution- 0.1°C, Accuracy-± 1.0% , Battery- 9 V Dc , Sensor Probe Input- Rtd (Pt-100) With Open Indication, Display Screen- Min. 75Mm Wide Lcd Low Battery Indication. , Aggreage Impact Value (Aiv) Apparatus :- Supply Of Aggregate Impact Value (Aiv) Apparatus Confirming To Is: 9377-1979(Reaffimed 2004) For Determination Of Aiv Of Coarse Aggregate As Per Is: 2386 (Part-4): 1963 (Reaffirmed - 2002). The Apparatus Shall Have Steel Hammer, Steel Cup Including Cylindrical Measures And Temping Rod. Steel Hammer With Sliding Facility Between The Vertical Steel Guides And Having Arrangment For Lifting, Free Fall And Locking System.A Stroke Counter Of Suitable Design Shall Be Provided To Automatically Record The Number Of Blows. The Total Mass Of Theapparatus Shall Be Between 45 To 60Kg.The Complete Apparatus Shall Be Supplied As Per Standardsand As Per Direction Of Engineer-In-Charge. The Quoted Rate Shall Be Inclusive Of All Taxes. , Digital Vernier Caliper - 300Mm :- Supply Of Digital Vernier Caliper Made Ofstainless Steel Of Approved Make And Good Quality With High Pricision To Measure Length, Internal/External Diameter, Steps And Depth Of Any Object. The Instrument Shall Requirement As Periso 13385-I, Din 862. Key Features Shall Be As Under :- Measurement Range- 0-300Mm, Resolution - 0.01Mm, Accuracy - ± 0.03Mm
