|
| 1 | Earth work excavation in hard/ dense soil in trenches width and depth not exceeding 1.50m and getting out. |
| 2 | Material and labour for sand filling under foundation including watering and consolidation. |
| 3 | M & L for PCC 1:3:6, C2 Type using 40mm graded aggregated in flooring. |
| 4 | M & L for providing reinforcement cement concrete in Footings, piles, Plinth beam with cement concrete A1 Type, 1:1.5:3 mix using 20mm graded aggregated. |
| 5 | M & L for providing reinforcement cement concrete in column, pillars and struts with cement concrete A1 Type, 1:1.5:3 mix using 20mm graded aggregated. |
| 6 | M & L for form work to sides of concrete foundation, bases of column, beam sides and soffits of foundation and plinth beams. (Flat) |
| 7 | M & L for form work to RCC members such as columns, pillers etc., |
| 8 | Supply and fixing of twisted MS Bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spiraling for hoping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips. |
| 9 | Supply and fixing of twisted MS Bars 6mm dia up to 8mm dia cut to length bent to shape required including cranking, bending, spiraling for hoping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips. |
| 10 | M & L for Brick work built inCM.1:6 using Sub-Class “B” Bricks,straight or curved on plan exc 6m meanradius. |
| 11 | M & L for providing plastering in CM 1:4, 15mm thick on brick / concrete surface. |
| 12 | M & L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work not exc 15 cmin width or girth; including cutting to edges, all mitres and stopped ends,etc. |
| 13 | S & F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, orforged into spikes; framed guard bars; and hung gates including pintle hinges stops hand made sliding bolts etc includind removal of existing damaged gate . |
| 14 | M & L for painting to steel surfaces ofany description, over 10cm in width or girth,with two coats of synthetic enamel paint over a coat of primer including preparing new surfaces. |
| 15 | Material and labour for two coats of exterior emulsion paint on surfaces of any description over 10cm girth or width, not otherwise described including preparation of new painted surface with one coat of primer. (Make : ASIAN/NEROLAC/BERGER or Suitabally Equivalent Make) |
| 16 | Cuttingholes in brick walls built in cement mortar Exc.half brick work but not exc.one brick for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required. |
| 17 | Removal of excavated soils exceeding 250m but not exceeding 500mm and depositing where directed. |
| 18 | Returning / refilling of soil / loose including spreading, leveling, watering and well ramming in layers not exceeding 25cm. |
| 19 | Dismantling posts or struts ( R.C.C.) any section, including taking out embedded portion and making good disturbed ground. |
