Tender For Civil/Furnishing Works To Be Carried Out In Connection With Renovation Of Flat No. 204, D Block, Raheja Park Apartment At Magdi Road Vijaynagar Removing /Dismantling & Carting Away Debris 1.1 DISMANTLING EXISITING CERAMIC TILE AT FLOORS & WALLS Dismantling tile work in floors and roofs laid in cement mortar in locations as below including carting away of the debris away from the site and disposing abiding municipal laws complete as per the direction of Engineer In Charge. SQFT 1350 1.2 GI pipeline and PVC pipes and conduits of all dimensions (in Kitchen, toilet, bath, WC, balcony, walls etc) Lump sum 1 1.3 Removing of old electrical items such as wiring and fittings switches, board/fans/tube lights etc. and old wire/accessories/ switch boards / tube lights etc.and removing from site including cleaning of premises LS per flat 1 1.4 Providing and erecting scaffolding in the duct area/ external area works upto the required height for the purpose of providing new service lines and connecting to the existing sewage lines, for window grill works etc. LS per flat 1 1.5 Removal of existing window sutter, Door including, Blacony wall and carting away of the debris away from the site and disposing abiding municipal laws complete as per the direction of Engineer In Charge. LS per flat 1 2 Civil repairs and Furniture works 2.1 Toilet Waterproofing Treatment WATERPROOFING OF SUNKEN AREA Providng water proofing treatment over sunken slabs of toilets using admixtures of CERA/FOSROC/SIKA/DR.FIXIT/ASIAN or other approved equivaent make with standard procedures specified by manufacturer and approved by the Engineer in Charge. The treatment to be carried out by authorised applicator of the approved manufacturer. The brief methodology to be followed are as below :Cleaning the surface with wire brush on the slab to remove all deleterious matters.Cutting of V grooves along the cracks and wall-slab joints and filled with cement sand mortar admixed with anti-shrink additives, (modified styrene butadiene rubber (SBR) based) at dosages as specified by the manufacturer. SQFT 180 The payment shall be based on the plan area of the bath room/toilet treated. The item to include the cost of brick supports construction to place IWC/traps etc, if any. Signature of the Contractor (with Seal) RENOVATION WORKS AT FLAT NO.204-D BLOCK, RAHEJA PARK APARTMENT 9 H.O., Bangalore The tenderer can use the equivalent or superior material as approved by the Engineer in charge, but the treatment shall be guaranteed for at least 5 years period. The Methodology of application/ treatment should be as per manufacturers specifications Removing waterproof concrete layer including brick bat coba/ cinders and carting away debris. Laying new brick bat coba layer of required thickness, applying cement based waterproofing base coat as per manufacturers specifications over brickbat layer & to a height of 30 cms on the side walls above the floor level as per the directions of the Engineer complete. The first coat of treatment shall be applied over a primer coat. After application of the first coat a fibre cloth mesh to be laid when the coat becomes tacky. Minimum 100 mm lapping to be maintained on the edges of fibre cloth mesh. After curing of the first coat, top coat to be applied on the right angle of first coat and to be allowed to dry for six hours before starting other activities of floor finish. A layer of sand is to be sprinkled on this 2nd coat in horizontals while in tacky stage. Ponding test to be done free of cost for 48 hrs and to check from soffit to ensure zero water seepage from the slab and joints. The treatment shall cover the slab and vertical surfaces of walls by 150mm above the tiled surface level. Necessary time interval between coats, curing time to be provided as per the methodologies specified by each of the manufacturer. The mixing proportions and coverages shall be also as specified by the manufacturer. Material and methodology of waterproofing to be got apporved by the enginner in charge before application. APPLICATION TO BE DONE BY AUTHORIZED PROFESSIONALS OF THE RESPECTIVE APPROVED MANUFACTURERS. Payment shall be for the total plan area of sunken portion, excluding the wall verticals. Perfomance guarantee cetificate of the installed waterproofing system for a period of 5 years to be submitted to the Enginner in charge in the prescribed format on Rs.200 non judicial stamp paper on completion/satisfactory testing of the waterproofing system. 2.2 Internal Plastering Providing and applying cement plaster to the walls in patches or long stretches in 1:4 (I cement : 4 coarse sand) upto average 20 mm thickness, including providing bands, drip moulds, grooves, scaffolding, curing for 7 days, leveling the surface in plumb, making surface good to receive the painting coats, etc SQFT 900 Signature of the Contractor (with Seal) RENOVATION WORKS AT FLAT NO.204-D BLOCK, RAHEJA PARK APARTMENT 10 H.O., Bangalore 2.3 Providing and constructing half brick masonry ( 8 or 4 thk. as per site requirement) in first class bricks in cement mortar 1:6 at including , Both side Double coat cement plaster 3/4 thIk with watering, curing, raking out joints etc., complete. ( Brick work proposed at Boundry) SQFT 80 2.4 Repair & Sevicing of Balcony railing including replacement of MS top pipe with stainless steel iron pipe including welding with existing balcony grill and joint in newaly constucted brick wallm, (SS Iron top pipe size: FHC 1-1/2 Diameter 0.050 thin wall hand rail tubing) Rft 40 3 Painting 3.1 Scrapping on existing surface with sand paper to remove old paint layers and Providing & applying Plaster of Paris punning/ putty in average 6 to 12 mm th. on walls and columns to bring the surface in plumb line and level over old plastered surface including scaffolding complete as per design and instructions by Architect / Engineer. SQFT 2,300.00 3.2 Providing and applying Acrylic Emulsion Paint (premium grade) in minimum of two coats of approved make and shade on all surfaces etc including scaffolding and all the necessary surface preparation. The surface shall be cleaned and applied with one coat of primer so as to achieve an even surface to apply paint as per the directions / to the satisfaction of the Engineer. SQFT 2,000.00 3.3 OBD paint for ceiling with different color of ceiling Bordering- description same as above 4.2 except using OBD SQFT 800 3.4 Providing and applying Enamel Paint in minimum of two coats of approved make and shade on surfaces including scaffolding and all the necessary surface preparation. The old paint shall be scrapped by wire brush including removal of rust layer, surface shall be cleaned, filled with putty & applied with one coat of primer so as to achieve an even surface to apply paint as per the directions / to the satisfaction of the Engineer SQFT 750 4 Floor & Wall tile work 4.1 PCC (M10) of avg. 40 to 50 mm thickness Providing and laying leveling course with a minimum thickness of 25mm in PCC 1:3:6 (12mm coarse aggregate) over existing concrete surface with required slope. The rate should include the cost of materials, labours, transportation, lead lift, curing etc., complete to teh satisfaction of the Engineer in charge. PCC to be provided whereever required as per directions of the Banks Engineer in Charge. SQFT 800 Signature of the Contractor (with Seal) RENOVATION WORKS AT FLAT NO.204-D BLOCK, RAHEJA PARK APARTMENT 11 H.O., Bangalore 4.2 ANTI-SKID CERAMIC TILES FLOORING IN TOILET FLOORING & UTILITY AREA : Providing and laying Ceramic anti-skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of ( kajaria/jhonson/RAK) make, in all colours, shades, except White, Ivory, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with epoxy grouting and matching pigments etc., complete. Basic cost of tiles Rs.45/- to Rs.50/- per sft. SQFT 220 4.3 CERAMIC TILES DADOING IN KITCHEN AND IN TOILET WALLS :Providing & laying glazed vitrified wall tiles in sizes 300mm x 600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of ( kajaria/jhonson/RAK) make, in all colours & shade in wall claddings over 25-30 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Item includes the cost of providing PVC tile edge beadings for the projected edges as well. (basic cost of tile :55-60/sft) . SQFT 500 4.4 VITRIFIED TILES FLOORING:Providing & laying double charged premium vitrified floor tiles in sizes 600mm x 600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of( kajaria/jhonson/RAK) make, in all colours & shade, in skirting, riser of steps, over 20 mm thick bed of cement mortar 1:4 (1cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete with Nano polished tiles of approved make. ( Basic cost of tile Rs.55/- to Rs.60/-per SFT) SQFT 600 4.6 Granite Work. 4.6.1 P/F of Granite door bottom. Sqft 17 4.6.2 P/F of Granite as a skirting and bordering at Hall and Bedroom as per instruction of site incharge fom bank side. Sqft 120 5 PLUMBING AND SANITARY PIPE LINES 5.1 All plumbing (hot & cold) pipes (15 mm or 20 mm dia) to be CPVC consealed in wall including all necessary high quality CPVC fittings such as bends, tees, flanges, elbows, coupling, reducer, unions, checknuts etc. joining with taflon tapes, excavation, refilling, consolidating wherever required. All joints to be water tight and properly sealed. Metalic(Brass) CPVC fitting to be used where fixtures such as shower, cocks, etc are to be used. The CPVC pipes shall be used to carry Signature of the Contractor (with Seal) RENOVATION WORKS AT FLAT NO.204-D BLOCK, RAHEJA PARK APARTMENT 12 H.O., Bangalore hot / cold water. Rates to include the cost of making/ drilling holes in walls/rcc members and making good the same after completion of the work 20 mm dia RFT 160 5.2 Providing and fixing ISI make PVC pipes in toilet, including scaffolding, supports, necessary specials like tees with or without inspection doors, Union, collars, bends with or without inspection door,fixing clamps etc all complete, for running sanitary waste / sewage. The item shall include necessary civil works like removing the plaster at wall junctions and replastering after repairs, providing clamps at regular intervals, etc 5.2.1 75mm dia(4kg/cm2) RFT 60 5.2.2 110mm dia (4kg/cm2) RFT 60 5.2.3 75mm dia(6kg/cm2) - for external lines including provision of proper clamps RFT 20 5.2.4 110mm dia (6kg/cm2) - for external lines including provision of proper clamps RFT 20 6 SANITARY FITTINGS AND FIXTURES Providing and fixing CP fittings ( Jaquar continental series or any other make as approved by the Engineer in charge make) as follows- Rates to include the cost of making/ drilling holes in walls/rcc members and making good the same after completion of the work 6.1 Angle Cock (Jaquar cat no. FUS CHR-29053/Parryware G3207A1) basic rate - Rs 1340/- per no Nos 12 6.2 Concealed Stop Cock (Jaquar cat no. ALD-089/Parryware G5053A1+G3283A1 ) basic rate - Rs 1225/- per no Nos 3 6.3 Swan neck sink cock (Jaquar cat no.FLR-CHR-53575D/Parryware G4270A1) basic rate - Rs.2580/- per no Nos 2 6.4 Pillar cock for washbasin (Jaquar make CAT NO ALI-CHR-85001/Parryware G2302A1) basic rate - Rs 2320/- per no nos 2 6.5 Bib cock Nozzle type for washing machine.(Jaquar Make 049NKN CONT/ Parryware G2779A1 ) basic rate - Rs 1225/- per no nos 2 6.6 2 in 1 Mixer (Jaquar cat no. CFUS –CHR-29273UPR/ Parryware G4816A1 ) and overhead shower with shower arm (Jaquar cat no. OHS-1989 or any other make as approved by the Engineer in charge) basic rate - Rs 6500/- per no nos 2 Signature of the Contractor (with Seal) RENOVATION WORKS AT FLAT NO.204-D BLOCK, RAHEJA PARK APARTMENT 13 H.O., Bangalore 6.7 Hand held health Faucet (both Jaquar Make) with 8mm dia , 1m long flexible tube and wall hook (Jaquar Make ALD-CHR-573/ Parryware CARDIFF PRO T9875A1) to be provided near the EWC basic rate - Rs 1830 per no Nos 2 7 SANITARY WARE Providing and fixing of white coloured sanitaryware of approved make and shape Rates to include the cost of making/ drilling holes in walls/rcc members and making good the same after completion of the work 7.1 EWC (Hindware One -Piece Flora S-220 Floor, Mount Western Commode, Item Model-2010731SW_1, ASIN-BOC6MQ43JP, Size 62Dx37wx67H Centimeters / Parryware Berry C895F (S-220) Size 675x415x720 mm) ) including including including S/P trap, M.S.chair PVC seat cover, necessary connections and connecting pipes complete in all respects as directed Basic rate: Rs.16000/--16500/- nos 2 7.2 Wash basin with half pedestal(Jaquar make ARS-WHT-39801+ ARS-WHT-39305/ Parryware make C041+C0320 ) including heavy duty bottle trap, waste coupling connection pipes and necessary fittings and fixtures etc. complete in all respects as directed. basic rate Basin 2020/- pedestal Rs.1870/- per no nos 2 7.3 Providing and fixing of SS sink (nirali ) with single bowl of size 18x24 in the kitchen platform along with cost of making the opening/ cutting for the sink complete Nos 1 7.4 Providing and fixing UPVC floor trap with SS grating set in cement mortar 1:3 and flush pointing of the joint in cement mortar 1:3 with water proofing compound. The approximate. size is 110 mm dia inlet and 75 mm dia outlet. Nos 8 8 MISCELLENOUS ITEMS Providing & fixing following items - 8.1 CP coated towel rods-2 feet length Nos 2 8.2 CP Coated towel ring 6 inch dia nos 3 9 FURNISHING WORKS 9.1 DOORS AND WINDOWS INCLUDING FRAMES 9.1.1 Removing the existing flush doors, making necessary alteration to the doors based on new floor level and refixing the doors using existing hardwares(labour charges only) nos 4 9.1.2 Relamination of Main Door - Relamination to the existing wooden shutters (both sides) and panels with 1mm laminate over 4mm ply and providing edge SQFT 110 Signature of the Contractor (with Seal) RENOVATION WORKS AT FLAT NO.204-D BLOCK, RAHEJA PARK APARTMENT 14 H.O., Bangalore beading. Measurement taken on one side only 9.1.3 Providing and fixing brass handles to doors ( 8 long) basic rate - Rs 500 per no no 18 9.1.4 Providing and fixing rubber bush (2 length) to backside of doors no 10 9.1.5 Providing and fixing door stopper to doors no 6 9.1.6 Providing and fixing brass Aldrop to backside of doors basic rate - Rs 500 per no no 15 9.1.6 Providing and fixing brass Tower bolt to backside of doors basic rate - Rs 200 per no no 12 9.2 WARDROBE REPAIRING AND RELAMINATION WORK Removing the existing lamination shutter And re-lamination of external & internal surface using 1mm thk laminate. , edge beading etc complete. And providing with new spring hinges decorative brass handles, godrej lock, tower bolts, edge beading etc complete. Rates to include the necessary repairs additional supports, shelf, frame and other works necessary to make the wardrobe refurbished. SQFT 80 9.3 UPVC Work 9.3.1 Providing and fixing UPVC 3 track windows and Door including framing, chipping, fitting, elbow, angles, tower bolt, fitting adapter, glass etc complete. All complete as per standard specifications, the cost to include the conveyance, material, labour, tools tackles, scaffolding, the Area of the windoes as given below etc. SQFT 160 9.3.2 Providing and fixing UPVC Door at Bed Room and Toilet including framing, chipping, fitting, elbow, angles, tower bolt, fitting adapter etc complete. All complete as per standard specifications, the cost to include the conveyance, material, labour, tools tackles, scaffolding, the Area of the windoes as given below etc. SQFT 50 9.4 TV Unit SQFT 45 Providing & fixing the T V unit paneling with approximate dimension 7x5 as per directions with Bottom storage box below paneling of dimension 7x1 with depth of 16. The unit to be made with 19mm thick MR grade plywood for all vertical frames, top, rear, bottom surfaces, shutters. All external surfaces shall be covered with 1mm thick glossy laminate and 1mm matt finish laminate for internal surfaces. 9.5 KITCHEN FURNITURE WORKS Signature of the Contractor (with Seal) RENOVATION WORKS AT FLAT NO.204-D BLOCK, RAHEJA PARK APARTMENT 15 H.O., Bangalore 9.5.1 Providing Shutters and shelves below kitchen counter: Providing and fixing shutters using 19mm BWP grade (BIS 310) plywood with external surface lamination using 1mm thk glossy laminate & internal surface lamination using 0.8mm thk laminate . The sides shall be finished with PVC/ wood lipping. The shutters should be provided with spring hinges decorative brass handles, tower bolts, edge beading etc complete. The support frame shall be made of wood/ ply so as to withstand the weight of the shutters. Insides to be provided with both sides laminated shelves with 19mm BWP grade (BIS 310) plywood up to a depth of 2. sqft 80 The unit of measurement is the elevation area provided with all required facilities Providing 19mm commercial MR grade plywood for all vertical frames, top, bottom surfaces, shutters and single shelf, double shelf for every alternate 2 length. two 3 brass handles, 0ne brass ball catch, 1 multipurpose lock of GODREJ make. All external surfaces shall be covered with 1mm thick glossy mirror finish laminate and 0.8mm matt finish laminate for all internal surfaces. The hidden surfaces shall be finished with anti termite paint. There shall be a swing shutters for every 1 width. Each pair of Shutters shall be provided with 2 pairs of 35mm size crank up clip on hinges having pneumatic hydraulic mechanism of EBCO/ KAFF make. At the bottom 4 depth and 6 height open counter for the full length to be provided. The unit of measurement is the elevation area of overhead cabinet fabricated & fixed. 9.5.2 GRANITE PLATFORM IN KITCHEN AREA : Providing and fixing 30 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite of jet black colour / shade for kitchen platforms, vanity counters and similar locations of required size, approved shade, colour and texture fixed to the walls, joints treated with epoxy grout of matching pigment, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Basic price Rs.160/ sft) SQFT 30 9.5.3 KITCHEN OVER HEAD STORAGE Providing & fixing overhead storage cabinets in kitchen having approximate sizes 23 height x1 depth with required length or any other dimensions to match with specific site conditions as per following specifications. Sft 16 Providing 19mm commercial MR grade plywood for all vertical frames, top, bottom surfaces, shutters and single shelf, double shelf for every alternate 2 length. two 3 brass handles, 0ne brass ball catch, 1 multipurpose lock of GODREJ make. All external surfaces shall be covered with 1mm thick glossy mirror finish laminate and 0.8mm matt finish laminate for all internal surfaces. The hidden surfaces shall be finished with anti termite paint. There shall be a swing shutters for every 1 width. Each pair of Shutters shall be provided with 2 pairs of 35mm size crank up clip on hinges having pneumatic hydraulic mechanism of EBCO/ KAFF make. At the bottom 4 depth and 6 height open counter for the full length to be provided. The unit of measurement is the elevation area of overhead cabinet fabricated & fixed. 10 Miscellaneous work in Furniture 10.1 Repairing and repainting/repolishing of existing kitchen shelf and show case. LS 1 10.2 Curtain Rods : P/f new curtain rods in premises with individual fixtures, brackets and hanger to hang the curtains RFT 40 10.3 P/F mirror Cabinet including material and labour charge of bank approved colour and design. Basic rate: Rs. 1000/- No 2 10.4 P/F Main Door Handel (Size 18 Inch) No 1 10.5 P/f door eye for Main door No 1 10.6 P/F Godrej make Night Latch Lock including required material and Labour etc. Basic rate: Rs. 1000/- No 1 10.7 P/F SS Soap stand including required material and Labour etc. Jaquar AKP-35731P/ ParrywareT4995A5 Basic rate: Rs. 1050/- No 2 11 BUY BACK OF EXISTING ITEMS
